From a644481ceaf09664797e10bdc5ef92d089ed3f0c Mon Sep 17 00:00:00 2001 From: June McEnroe Date: Mon, 14 Oct 2013 15:37:04 -0400 Subject: Remove unused configs --- .config/awesome/icons/clock.png | Bin 374 -> 0 bytes .config/awesome/icons/pause.png | Bin 355 -> 0 bytes .config/awesome/icons/play.png | Bin 363 -> 0 bytes .config/awesome/icons/stop.png | Bin 355 -> 0 bytes .config/awesome/rc.lua | 341 ------------- .../themes/Tomorrow-Night/taglist/squarefz.png | Bin 866 -> 0 bytes .../themes/Tomorrow-Night/taglist/squarez.png | Bin 871 -> 0 bytes .config/awesome/themes/Tomorrow-Night/theme.lua | 98 ---- .config/xfce4/terminal/terminalrc | 31 -- .mplayer/config | 1 - .mplayer/input.conf | 1 - .taskrc | 28 - .xinitrc | 24 - etc/dnsmasq.conf | 566 --------------------- etc/pacman.conf | 100 ---- etc/pulse/daemon.conf | 87 ---- etc/pulse/default.pa | 167 ------ etc/slim.conf | 91 ---- 18 files changed, 1535 deletions(-) delete mode 100644 .config/awesome/icons/clock.png delete mode 100644 .config/awesome/icons/pause.png delete mode 100644 .config/awesome/icons/play.png delete mode 100644 .config/awesome/icons/stop.png delete mode 100644 .config/awesome/rc.lua delete mode 100644 .config/awesome/themes/Tomorrow-Night/taglist/squarefz.png delete mode 100644 .config/awesome/themes/Tomorrow-Night/taglist/squarez.png delete mode 100644 .config/awesome/themes/Tomorrow-Night/theme.lua delete mode 100644 .config/xfce4/terminal/terminalrc delete mode 100644 .mplayer/config delete mode 100644 .mplayer/input.conf delete mode 100644 .taskrc delete mode 100644 .xinitrc delete mode 100644 etc/dnsmasq.conf delete mode 100644 etc/pacman.conf delete mode 100644 etc/pulse/daemon.conf delete mode 100644 etc/pulse/default.pa delete mode 100644 etc/slim.conf diff --git a/.config/awesome/icons/clock.png b/.config/awesome/icons/clock.png deleted file mode 100644 index 74e12046..00000000 Binary files a/.config/awesome/icons/clock.png and /dev/null differ diff --git a/.config/awesome/icons/pause.png b/.config/awesome/icons/pause.png deleted file mode 100644 index c8ebe574..00000000 Binary files a/.config/awesome/icons/pause.png and /dev/null differ diff --git a/.config/awesome/icons/play.png b/.config/awesome/icons/play.png deleted file mode 100644 index 851ed1bc..00000000 Binary files a/.config/awesome/icons/play.png and /dev/null differ diff --git a/.config/awesome/icons/stop.png b/.config/awesome/icons/stop.png deleted file mode 100644 index afe3e422..00000000 Binary files a/.config/awesome/icons/stop.png and /dev/null differ diff --git a/.config/awesome/rc.lua b/.config/awesome/rc.lua deleted file mode 100644 index d5d26cf4..00000000 --- a/.config/awesome/rc.lua +++ /dev/null @@ -1,341 +0,0 @@ --- Standard awesome library -local gears = require("gears") -local awful = require("awful") -awful.rules = require("awful.rules") -require("awful.autofocus") --- Widget and layout library -local wibox = require("wibox") --- Theme handling library -local beautiful = require("beautiful") --- Notification library -local naughty = require("naughty") -local menubar = require("menubar") - -local vicious = require("vicious") - --- {{{ Error handling --- Check if awesome encountered an error during startup and fell back to --- another config (This code will only ever execute for the fallback config) -if awesome.startup_errors then - naughty.notify({ preset = naughty.config.presets.critical, - title = "Oops, there were errors during startup!", - text = awesome.startup_errors }) -end - --- Handle runtime errors after startup -do - local in_error = false - awesome.connect_signal("debug::error", function (err) - -- Make sure we don't go into an endless error loop - if in_error then return end - in_error = true - - naughty.notify({ preset = naughty.config.presets.critical, - title = "Oops, an error happened!", - text = err }) - in_error = false - end) -end --- }}} - -home = os.getenv("HOME") -awesome_home = home .. "/.config/awesome" -terminal = "xfce4-terminal" -editor = "gvim" - -modkey = "Mod4" - --- Theming -beautiful.init(awesome_home .. "/themes/current/theme.lua") - -layouts = { - awful.layout.suit.tile, - awful.layout.suit.tile.left, - awful.layout.suit.tile.bottom, - awful.layout.suit.tile.top, - awful.layout.suit.max, - awful.layout.suit.floating -} - -tags = { - names = { 1, 2, 3, 4, 5, 6, 7, 8, 9 }, - layouts = { - layouts[5], - layouts[3], - layouts[1], - layouts[1], - layouts[1], - layouts[1], - layouts[1], - layouts[1], - layouts[6] - } -} - -for s = 1, screen.count() do - tags[s] = awful.tag(tags.names, s, tags.layouts) -end - --- disable startup-notification globally -local oldspawn = awful.util.spawn -awful.util.spawn = function (s) - oldspawn(s, false) -end - --- wibox junk -mywibox = {} -mypromptbox = {} -mytaglist = {} -mytaglist.buttons = awful.util.table.join( - awful.button({ }, 1, awful.tag.viewonly), - awful.button({ modkey }, 1, awful.client.movetotag), - awful.button({ }, 3, awful.tag.viewtoggle), - awful.button({ modkey }, 3, awful.client.toggletag), - awful.button({ }, 4, function(t) awful.tag.viewnext(awful.tag.getscreen(t)) end), - awful.button({ }, 5, function(t) awful.tag.viewprev(awful.tag.getscreen(t)) end) - ) - -myseparator = wibox.widget.textbox() -myseparator:set_text(" ") - -myclock = awful.widget.textclock("%a %b %d, %I:%M %p") - -mysystray = wibox.widget.systray() - -mympd = wibox.widget.textbox() - -function icon(i) - return awesome_home .. "/icons/" .. i .. ".png" -end - -myicons = { - play = icon("play"), - pause = icon("pause"), - stop = icon("stop"), - clock = icon("clock"), -} - -myclockicon = wibox.widget.imagebox() -myclockicon:set_image(myicons.clock) - -mympdicon = wibox.widget.imagebox() -mympdicon:set_image(myicons.stop) - -vicious.register(mympd, vicious.widgets.mpd, function (widget, args) - if args["{state}"] == "Stop" then - mympdicon:set_image(myicons.stop) - return "" - end - if args["{state}"] == "Pause" then - mympdicon:set_image(myicons.pause) - else - mympdicon:set_image(myicons.play) - end - return args["{Artist}"] .. " - " .. args["{Title}"] -end) - -for s = 1, screen.count() do - mypromptbox[s] = awful.widget.prompt() - mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons) - mywibox[s] = awful.wibox({ position = "top", screen = s, height = 16}) - - local left_layout = wibox.layout.fixed.horizontal() - left_layout:add(mytaglist[s]) - left_layout:add(mypromptbox[s]) - - local right_layout = wibox.layout.fixed.horizontal() - right_layout:add(mympdicon) - right_layout:add(mympd) - right_layout:add(myseparator) - right_layout:add(myclockicon) - right_layout:add(myclock) - if s == 1 then right_layout:add(mysystray) end - - local layout = wibox.layout.align.horizontal() - layout:set_left(left_layout) - layout:set_right(right_layout) - - mywibox[s]:set_widget(layout) -end - --- Bindings -root.buttons(awful.util.table.join( - awful.button({ }, 4, awful.tag.viewnext), - awful.button({ }, 5, awful.tag.viewprev))) - -globalkeys = awful.util.table.join( - awful.key({ modkey }, "Left", awful.tag.viewprev), - awful.key({ modkey }, "Right", awful.tag.viewnext), - - -- Client focus - awful.key({ modkey }, "j", function () - awful.client.focus.byidx(1) - if client.focus then client.focus:raise() end - end), - awful.key({ modkey }, "k", function () - awful.client.focus.byidx(-1) - if client.focus then client.focus:raise() end - end), - - -- Client movement - awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx(1) end), - awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx(-1) end), - awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative(1) end), - awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end), - awful.key({ modkey }, "u", awful.client.urgent.jumpto), - awful.key({ modkey, "Control" }, "n", awful.client.restore), - - -- Tag modification - awful.key({ modkey }, "l", function () awful.tag.incmwfact(0.05) end), - awful.key({ modkey }, "h", function () awful.tag.incmwfact(-0.05) end), - awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster(1) end), - awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end), - awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol(1) end), - awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end), - awful.key({ modkey }, "space", function () awful.layout.inc(layouts, 1) end), - awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end), - - -- Prompts - awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end), - awful.key({ modkey }, "x", function () - awful.prompt.run({ prompt = "Lua: " }, - mypromptbox[mouse.screen].widget, - awful.util.eval, nil, - awful.util.getdir("cache") .. "/history_eval") - end), - - awful.key({ }, "Print", function () awful.util.spawn(home .. "/bin/scrot-upload") end), - awful.key({ modkey }, "Print", function () awful.util.spawn(home .. "/bin/scrot-upload -b -s") end), - awful.key({ }, "XF86AudioPlay", function () awful.util.spawn("mpc toggle") end), - awful.key({ }, "XF86AudioStop", function () awful.util.spawn("mpc stop") end), - awful.key({ }, "XF86AudioNext", function () awful.util.spawn("mpc next") end), - awful.key({ }, "XF86AudioPrev", function () awful.util.spawn("mpc prev") end), - - awful.key({ modkey }, "Return", function () awful.util.spawn(terminal) end), - awful.key({ modkey, "Control" }, "r", awesome.restart), - awful.key({ modkey, "Shift" }, "q", awesome.quit)) - -clientkeys = awful.util.table.join( - awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end), - awful.key({ modkey, "Shift" }, "c", function (c) c:kill() end), - awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ), - awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end), - awful.key({ modkey, }, "o", awful.client.movetoscreen ), - awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end), - awful.key({ modkey, }, "n", - function (c) - -- The client currently has the input focus, so it cannot be - -- minimized, since minimized clients can't have the focus. - c.minimized = true - end), - awful.key({ modkey, }, "m", - function (c) - c.maximized_horizontal = not c.maximized_horizontal - c.maximized_vertical = not c.maximized_vertical - end) -) --- Compute the maximum number of digit we need, limited to 9 -keynumber = 0 -for s = 1, screen.count() do - keynumber = math.min(9, math.max(#tags[s], keynumber)); -end - --- Bind all key numbers to tags. --- Be careful: we use keycodes to make it works on any keyboard layout. --- This should map on the top row of your keyboard, usually 1 to 9. -for i = 1, keynumber do - globalkeys = awful.util.table.join(globalkeys, - awful.key({ modkey }, "#" .. i + 9, - function () - local screen = mouse.screen - if tags[screen][i] then - awful.tag.viewonly(tags[screen][i]) - end - end), - awful.key({ modkey, "Control" }, "#" .. i + 9, - function () - local screen = mouse.screen - if tags[screen][i] then - awful.tag.viewtoggle(tags[screen][i]) - end - end), - awful.key({ modkey, "Shift" }, "#" .. i + 9, - function () - if client.focus and tags[client.focus.screen][i] then - awful.client.movetotag(tags[client.focus.screen][i]) - end - end), - awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9, - function () - if client.focus and tags[client.focus.screen][i] then - awful.client.toggletag(tags[client.focus.screen][i]) - end - end)) -end - -clientbuttons = awful.util.table.join( - awful.button({ }, 1, function (c) client.focus = c; c:raise() end), - awful.button({ modkey }, 1, awful.mouse.client.move), - awful.button({ modkey }, 3, awful.mouse.client.resize)) - --- Set keys -root.keys(globalkeys) --- }}} - --- {{{ Rules -awful.rules.rules = { - -- All clients will match this rule. - { rule = { }, - properties = { border_width = beautiful.border_width, - border_color = beautiful.border_normal, - focus = true, - keys = clientkeys, - buttons = clientbuttons } }, - { rule = { class = "MPlayer" }, - properties = { floating = true } }, - { rule = { class = "mplayer2" }, - properties = { floating = true } }, - { rule = { class = "pinentry" }, - properties = { floating = true } }, - { rule = { class = "gimp" }, - properties = { floating = true } }, - { rule = { class = "qemu" }, - properties = { floating = true } }, - { rule = { class = "feh" }, - properties = { floating = true } }, - -- Set Firefox to always map on tags number 2 of screen 1. - -- { rule = { class = "Firefox" }, - -- properties = { tag = tags[1][2] } }, -} --- }}} - --- {{{ Signals --- Signal function to execute when a new client appears. -client.connect_signal("manage", function (c, startup) - -- Add a titlebar - -- awful.titlebar.add(c, { modkey = modkey }) - - -- Enable sloppy focus - c:connect_signal("mouse::enter", function(c) - if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier - and awful.client.focus.filter(c) then - client.focus = c - end - end) - - if not startup then - -- Set the windows at the slave, - -- i.e. put it at the end of others instead of setting it master. - -- awful.client.setslave(c) - - -- Put windows in a smart way, only if they does not set an initial position. - if not c.size_hints.user_position and not c.size_hints.program_position then - awful.placement.no_overlap(c) - awful.placement.no_offscreen(c) - end - end -end) - -client.connect_signal("focus", function(c) c.border_color = beautiful.border_focus end) -client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end) --- }}} diff --git a/.config/awesome/themes/Tomorrow-Night/taglist/squarefz.png b/.config/awesome/themes/Tomorrow-Night/taglist/squarefz.png deleted file mode 100644 index 8db2f080..00000000 Binary files a/.config/awesome/themes/Tomorrow-Night/taglist/squarefz.png and /dev/null differ diff --git a/.config/awesome/themes/Tomorrow-Night/taglist/squarez.png b/.config/awesome/themes/Tomorrow-Night/taglist/squarez.png deleted file mode 100644 index 21f6edf9..00000000 Binary files a/.config/awesome/themes/Tomorrow-Night/taglist/squarez.png and /dev/null differ diff --git a/.config/awesome/themes/Tomorrow-Night/theme.lua b/.config/awesome/themes/Tomorrow-Night/theme.lua deleted file mode 100644 index 67ccc346..00000000 --- a/.config/awesome/themes/Tomorrow-Night/theme.lua +++ /dev/null @@ -1,98 +0,0 @@ ---------------------------- --- Default awesome theme -- ---------------------------- - -theme = {} - -theme.font = "sans 8" - -theme.bg_normal = "#1d1f2100" -theme.bg_focus = "#373b4155" -theme.bg_urgent = "#1d1f2155" -theme.bg_minimize = "#282a2e" -theme.bg_systray = "#5A6290" - -theme.fg_normal = "#c5c8c6" -theme.fg_focus = "#c5c8c6" -theme.fg_urgent = "#cc6666" -theme.fg_minimize = "#c5c8c6" - -theme.border_width = 1 -theme.border_normal = "#1d1f21" -theme.border_focus = "#282a2e" -theme.border_marked = "#373b41" - --- There are other variable sets --- overriding the default one when --- defined, the sets are: --- [taglist|tasklist]_[bg|fg]_[focus|urgent] --- titlebar_[bg|fg]_[normal|focus] --- tooltip_[font|opacity|fg_color|bg_color|border_width|border_color] --- mouse_finder_[color|timeout|animate_timeout|radius|factor] --- Example: ---theme.taglist_bg_focus = "#ff0000" - --- Display the taglist squares -theme.taglist_squares_sel = ".config/awesome/themes/Tomorrow-Night/taglist/squarefz.png" -theme.taglist_squares_unsel = ".config/awesome/themes/Tomorrow-Night/taglist/squarez.png" - --- Variables set for theming the menu: --- menu_[bg|fg]_[normal|focus] --- menu_[border_color|border_width] -theme.menu_submenu_icon = "/usr/share/awesome/themes/default/submenu.png" -theme.menu_height = 15 -theme.menu_width = 100 - --- You can add as many variables as --- you wish and access them by using --- beautiful.variable in your rc.lua ---theme.bg_widget = "#cc0000" - --- Define the image to load -theme.titlebar_close_button_normal = "/usr/share/awesome/themes/default/titlebar/close_normal.png" -theme.titlebar_close_button_focus = "/usr/share/awesome/themes/default/titlebar/close_focus.png" - -theme.titlebar_ontop_button_normal_inactive = "/usr/share/awesome/themes/default/titlebar/ontop_normal_inactive.png" -theme.titlebar_ontop_button_focus_inactive = "/usr/share/awesome/themes/default/titlebar/ontop_focus_inactive.png" -theme.titlebar_ontop_button_normal_active = "/usr/share/awesome/themes/default/titlebar/ontop_normal_active.png" -theme.titlebar_ontop_button_focus_active = "/usr/share/awesome/themes/default/titlebar/ontop_focus_active.png" - -theme.titlebar_sticky_button_normal_inactive = "/usr/share/awesome/themes/default/titlebar/sticky_normal_inactive.png" -theme.titlebar_sticky_button_focus_inactive = "/usr/share/awesome/themes/default/titlebar/sticky_focus_inactive.png" -theme.titlebar_sticky_button_normal_active = "/usr/share/awesome/themes/default/titlebar/sticky_normal_active.png" -theme.titlebar_sticky_button_focus_active = "/usr/share/awesome/themes/default/titlebar/sticky_focus_active.png" - -theme.titlebar_floating_button_normal_inactive = "/usr/share/awesome/themes/default/titlebar/floating_normal_inactive.png" -theme.titlebar_floating_button_focus_inactive = "/usr/share/awesome/themes/default/titlebar/floating_focus_inactive.png" -theme.titlebar_floating_button_normal_active = "/usr/share/awesome/themes/default/titlebar/floating_normal_active.png" -theme.titlebar_floating_button_focus_active = "/usr/share/awesome/themes/default/titlebar/floating_focus_active.png" - -theme.titlebar_maximized_button_normal_inactive = "/usr/share/awesome/themes/default/titlebar/maximized_normal_inactive.png" -theme.titlebar_maximized_button_focus_inactive = "/usr/share/awesome/themes/default/titlebar/maximized_focus_inactive.png" -theme.titlebar_maximized_button_normal_active = "/usr/share/awesome/themes/default/titlebar/maximized_normal_active.png" -theme.titlebar_maximized_button_focus_active = "/usr/share/awesome/themes/default/titlebar/maximized_focus_active.png" - -theme.wallpaper = "/usr/share/awesome/themes/default/background.png" - --- You can use your own layout icons like this: -theme.layout_fairh = "/usr/share/awesome/themes/default/layouts/fairhw.png" -theme.layout_fairv = "/usr/share/awesome/themes/default/layouts/fairvw.png" -theme.layout_floating = "/usr/share/awesome/themes/default/layouts/floatingw.png" -theme.layout_magnifier = "/usr/share/awesome/themes/default/layouts/magnifierw.png" -theme.layout_max = "/usr/share/awesome/themes/default/layouts/maxw.png" -theme.layout_fullscreen = "/usr/share/awesome/themes/default/layouts/fullscreenw.png" -theme.layout_tilebottom = "/usr/share/awesome/themes/default/layouts/tilebottomw.png" -theme.layout_tileleft = "/usr/share/awesome/themes/default/layouts/tileleftw.png" -theme.layout_tile = "/usr/share/awesome/themes/default/layouts/tilew.png" -theme.layout_tiletop = "/usr/share/awesome/themes/default/layouts/tiletopw.png" -theme.layout_spiral = "/usr/share/awesome/themes/default/layouts/spiralw.png" -theme.layout_dwindle = "/usr/share/awesome/themes/default/layouts/dwindlew.png" - -theme.awesome_icon = "/usr/share/awesome/icons/awesome16.png" - --- Define the icon theme for application icons. If not set then the icons --- from /usr/share/icons and /usr/share/icons/hicolor will be used. -theme.icon_theme = nil - -return theme --- vim: filetype=lua:expandtab:shiftwidth=4:tabstop=8:softtabstop=4:textwidth=80 diff --git a/.config/xfce4/terminal/terminalrc b/.config/xfce4/terminal/terminalrc deleted file mode 100644 index d661190b..00000000 --- a/.config/xfce4/terminal/terminalrc +++ /dev/null @@ -1,31 +0,0 @@ -[Configuration] -BackgroundMode=TERMINAL_BACKGROUND_TRANSPARENT -BackgroundDarkness=0.850000 -FontName=DejaVu Sans Mono 9 -MiscAlwaysShowTabs=FALSE -MiscBell=FALSE -MiscBordersDefault=TRUE -MiscCursorBlinks=TRUE -MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK -MiscDefaultGeometry=80x24 -MiscInheritGeometry=FALSE -MiscMenubarDefault=FALSE -MiscMouseAutohide=FALSE -MiscToolbarDefault=FALSE -MiscConfirmClose=TRUE -MiscCycleTabs=TRUE -MiscTabCloseButtons=TRUE -MiscTabCloseMiddleClick=TRUE -MiscTabPosition=GTK_POS_TOP -MiscHighlightUrls=TRUE -ScrollingBar=TERMINAL_SCROLLBAR_NONE -ScrollingLines=100000 -ScrollingOnOutput=FALSE -ShortcutsNoMenukey=TRUE -TitleMode=TERMINAL_TITLE_REPLACE -ColorCursor=#dd00dd00dd00 -ColorForeground=#dd00dd00dd00 -ColorBackground=#115511551155 -ColorPalette=#115511551155;#aacc44114422;#9900aa995599;#ff44bbff7755;#66aa99ffbb55;#aaaa775599ff;#7755bb55aaaa;#dd00dd00dd00;#550055005500;#aacc44114422;#9900aa995599;#ff44bbff7755;#66aa99ffbb55;#aaaa775599ff;#7755bb55aaaa;#ff55ff55ff55 -ShortcutsNoMnemonics=TRUE - diff --git a/.mplayer/config b/.mplayer/config deleted file mode 100644 index 9d9036d9..00000000 --- a/.mplayer/config +++ /dev/null @@ -1 +0,0 @@ -ao=pulse diff --git a/.mplayer/input.conf b/.mplayer/input.conf deleted file mode 100644 index 486422aa..00000000 --- a/.mplayer/input.conf +++ /dev/null @@ -1 +0,0 @@ -MOUSE_BTN0 pause diff --git a/.taskrc b/.taskrc deleted file mode 100644 index 6739764d..00000000 --- a/.taskrc +++ /dev/null @@ -1,28 +0,0 @@ -# [Created by task 1.9.4 3/30/2012 15:32:58] -# Taskwarrior program configuration file. -# For more documentation, see http://taskwarrior.org or try 'man task', 'man task-faq', -# 'man task-tutorial', 'man task-color', 'man task-sync' or 'man taskrc' - -# Here is an example of entries that use the default, override and blank values -# variable=foo -- By specifying a value, this overrides the default -# variable= -- By specifying no value, this means no default -# #variable=foo -- By commenting out the line, or deleting it, this uses the default - -# Use the command 'task show' to see all defaults and overrides - -# Files -data.location=/home/home/.task - -# Color theme (uncomment one to use) -#include /usr/local/share/doc/task/rc/light-16.theme -#include /usr/local/share/doc/task/rc/light-256.theme -#include /usr/share/doc/task/rc/dark-16.theme -#include /usr/share/doc/task/rc/dark-256.theme -#include /usr/local/share/doc/task/rc/dark-red-256.theme -#include /usr/local/share/doc/task/rc/dark-green-256.theme -#include /usr/local/share/doc/task/rc/dark-blue-256.theme -#include /usr/local/share/doc/task/rc/dark-violets-256.theme -#include /usr/local/share/doc/task/rc/dark-yellow-green.theme - -#include /usr/share/doc/task/rc/holidays-US.rc -#include /usr/share/doc/task/rc/holidays-CA.rc diff --git a/.xinitrc b/.xinitrc deleted file mode 100644 index 0f7a73c1..00000000 --- a/.xinitrc +++ /dev/null @@ -1,24 +0,0 @@ -export BROWSER=chromium - -xrdb ~/.Xresources & -xautolock -locker slimlock -time 30 & -unclutter -idle 3 -noevents & -start-pulseaudio-x11 & -xsetroot -cursor_name left_ptr & -nitrogen --restore & -xcompmgr & - -mpd & -mpdscribble & -mpDris2 & - -dropboxd & - -# Keyboard stuff -xmodmap -e "clear Lock" -e "keysym Caps_Lock = Escape" # Caps Lock -> Esc -xmodmap -e "remove mod1 = Alt_R" -e "keysym Alt_R = Multi_key" # Right Alt -> Compose -xmodmap -e "remove mod1 = Alt_L" -e "remove mod4 = Super_L" -e "add mod1 = Super_L" -e "add mod4 = Alt_L" # Swap Super and Alt - -SESSION=awesome -[ $1 ] && SESSION=$1 -exec dbus-launch $SESSION diff --git a/etc/dnsmasq.conf b/etc/dnsmasq.conf deleted file mode 100644 index f9c0b845..00000000 --- a/etc/dnsmasq.conf +++ /dev/null @@ -1,566 +0,0 @@ -# Configuration file for dnsmasq. -# -# Format is one option per line, legal options are the same -# as the long options legal on the command line. See -# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. - -# The following two options make you a better netizen, since they -# tell dnsmasq to filter out queries which the public DNS cannot -# answer, and which load the servers (especially the root servers) -# unnecessarily. If you have a dial-on-demand link they also stop -# these requests from bringing up the link unnecessarily. - -# Never forward plain names (without a dot or domain part) -#domain-needed -# Never forward addresses in the non-routed address spaces. -#bogus-priv - - -# Uncomment this to filter useless windows-originated DNS requests -# which can trigger dial-on-demand links needlessly. -# Note that (amongst other things) this blocks all SRV requests, -# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. -# This option only affects forwarding, SRV records originating for -# dnsmasq (via srv-host= lines) are not suppressed by it. -#filterwin2k - -# Change this line if you want dns to get its upstream servers from -# somewhere other that /etc/resolv.conf -#resolv-file= - -# By default, dnsmasq will send queries to any of the upstream -# servers it knows about and tries to favour servers to are known -# to be up. Uncommenting this forces dnsmasq to try each query -# with each server strictly in the order they appear in -# /etc/resolv.conf -#strict-order - -# If you don't want dnsmasq to read /etc/resolv.conf or any other -# file, getting its servers from this file instead (see below), then -# uncomment this. -#no-resolv - -# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv -# files for changes and re-read them then uncomment this. -#no-poll - -# Add other name servers here, with domain specs if they are for -# non-public domains. -#server=/localnet/192.168.0.1 - -# Example of routing PTR queries to nameservers: this will send all -# address->name queries for 192.168.3/24 to nameserver 10.1.2.3 -#server=/3.168.192.in-addr.arpa/10.1.2.3 - -# Add local-only domains here, queries in these domains are answered -# from /etc/hosts or DHCP only. -#local=/localnet/ - -# Add domains which you want to force to an IP address here. -# The example below send any host in double-click.net to a local -# web-server. -#address=/double-click.net/127.0.0.1 - -# --address (and --server) work with IPv6 addresses too. -#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83 - -# You can control how dnsmasq talks to a server: this forces -# queries to 10.1.2.3 to be routed via eth1 -# server=10.1.2.3@eth1 - -# and this sets the source (ie local) address used to talk to -# 10.1.2.3 to 192.168.1.1 port 55 (there must be a interface with that -# IP on the machine, obviously). -# server=10.1.2.3@192.168.1.1#55 - -# If you want dnsmasq to change uid and gid to something other -# than the default, edit the following lines. -#user= -#group= - -# If you want dnsmasq to listen for DHCP and DNS requests only on -# specified interfaces (and the loopback) give the name of the -# interface (eg eth0) here. -# Repeat the line for more than one interface. -#interface= -# Or you can specify which interface _not_ to listen on -#except-interface= -# Or which to listen on by address (remember to include 127.0.0.1 if -# you use this.) -#listen-address= -# If you want dnsmasq to provide only DNS service on an interface, -# configure it as shown above, and then use the following line to -# disable DHCP and TFTP on it. -#no-dhcp-interface= - -# On systems which support it, dnsmasq binds the wildcard address, -# even when it is listening on only some interfaces. It then discards -# requests that it shouldn't reply to. This has the advantage of -# working even when interfaces come and go and change address. If you -# want dnsmasq to really bind only the interfaces it is listening on, -# uncomment this option. About the only time you may need this is when -# running another nameserver on the same machine. -#bind-interfaces - -# If you don't want dnsmasq to read /etc/hosts, uncomment the -# following line. -#no-hosts -# or if you want it to read another file, as well as /etc/hosts, use -# this. -#addn-hosts=/etc/banner_add_hosts - -# Set this (and domain: see below) if you want to have a domain -# automatically added to simple names in a hosts-file. -#expand-hosts - -# Set the domain for dnsmasq. this is optional, but if it is set, it -# does the following things. -# 1) Allows DHCP hosts to have fully qualified domain names, as long -# as the domain part matches this setting. -# 2) Sets the "domain" DHCP option thereby potentially setting the -# domain of all systems configured by DHCP -# 3) Provides the domain part for "expand-hosts" -#domain=thekelleys.org.uk - -# Set a different domain for a particular subnet -#domain=wireless.thekelleys.org.uk,192.168.2.0/24 - -# Same idea, but range rather then subnet -#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200 - -# Uncomment this to enable the integrated DHCP server, you need -# to supply the range of addresses available for lease and optionally -# a lease time. If you have more than one network, you will need to -# repeat this for each network on which you want to supply DHCP -# service. -#dhcp-range=192.168.0.50,192.168.0.150,12h - -# This is an example of a DHCP range where the netmask is given. This -# is needed for networks we reach the dnsmasq DHCP server via a relay -# agent. If you don't know what a DHCP relay agent is, you probably -# don't need to worry about this. -#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h - -# This is an example of a DHCP range which sets a tag, so that -# some DHCP options may be set only for this network. -#dhcp-range=set:red,192.168.0.50,192.168.0.150 - -# Use this DHCP range only when the tag "green" is set. -#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h - -# Specify a subnet which can't be used for dynamic address allocation, -# is available for hosts with matching --dhcp-host lines. Note that -# dhcp-host declarations will be ignored unless there is a dhcp-range -# of some type for the subnet in question. -# In this case the netmask is implied (it comes from the network -# configuration on the machine running dnsmasq) it is possible to give -# an explicit netmask instead. -#dhcp-range=192.168.0.0,static - -# Supply parameters for specified hosts using DHCP. There are lots -# of valid alternatives, so we will give examples of each. Note that -# IP addresses DO NOT have to be in the range given above, they just -# need to be on the same network. The order of the parameters in these -# do not matter, it's permissible to give name, address and MAC in any -# order. - -# Always allocate the host with Ethernet address 11:22:33:44:55:66 -# The IP address 192.168.0.60 -#dhcp-host=11:22:33:44:55:66,192.168.0.60 - -# Always set the name of the host with hardware address -# 11:22:33:44:55:66 to be "fred" -#dhcp-host=11:22:33:44:55:66,fred - -# Always give the host with Ethernet address 11:22:33:44:55:66 -# the name fred and IP address 192.168.0.60 and lease time 45 minutes -#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m - -# Give a host with Ethernet address 11:22:33:44:55:66 or -# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume -# that these two Ethernet interfaces will never be in use at the same -# time, and give the IP address to the second, even if it is already -# in use by the first. Useful for laptops with wired and wireless -# addresses. -#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60 - -# Give the machine which says its name is "bert" IP address -# 192.168.0.70 and an infinite lease -#dhcp-host=bert,192.168.0.70,infinite - -# Always give the host with client identifier 01:02:02:04 -# the IP address 192.168.0.60 -#dhcp-host=id:01:02:02:04,192.168.0.60 - -# Always give the host with client identifier "marjorie" -# the IP address 192.168.0.60 -#dhcp-host=id:marjorie,192.168.0.60 - -# Enable the address given for "judge" in /etc/hosts -# to be given to a machine presenting the name "judge" when -# it asks for a DHCP lease. -#dhcp-host=judge - -# Never offer DHCP service to a machine whose Ethernet -# address is 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,ignore - -# Ignore any client-id presented by the machine with Ethernet -# address 11:22:33:44:55:66. This is useful to prevent a machine -# being treated differently when running under different OS's or -# between PXE boot and OS boot. -#dhcp-host=11:22:33:44:55:66,id:* - -# Send extra options which are tagged as "red" to -# the machine with Ethernet address 11:22:33:44:55:66 -#dhcp-host=11:22:33:44:55:66,set:red - -# Send extra options which are tagged as "red" to -# any machine with Ethernet address starting 11:22:33: -#dhcp-host=11:22:33:*:*:*,set:red - -# Ignore any clients which are specified in dhcp-host lines -# or /etc/ethers. Equivalent to ISC "deny unknown-clients". -# This relies on the special "known" tag which is set when -# a host is matched. -#dhcp-ignore=tag:!known - -# Send extra options which are tagged as "red" to any machine whose -# DHCP vendorclass string includes the substring "Linux" -#dhcp-vendorclass=set:red,Linux - -# Send extra options which are tagged as "red" to any machine one -# of whose DHCP userclass strings includes the substring "accounts" -#dhcp-userclass=set:red,accounts - -# Send extra options which are tagged as "red" to any machine whose -# MAC address matches the pattern. -#dhcp-mac=set:red,00:60:8C:*:*:* - -# If this line is uncommented, dnsmasq will read /etc/ethers and act -# on the ethernet-address/IP pairs found there just as if they had -# been given as --dhcp-host options. Useful if you keep -# MAC-address/host mappings there for other purposes. -#read-ethers - -# Send options to hosts which ask for a DHCP lease. -# See RFC 2132 for details of available options. -# Common options can be given to dnsmasq by name: -# run "dnsmasq --help dhcp" to get a list. -# Note that all the common settings, such as netmask and -# broadcast address, DNS server and default route, are given -# sane defaults by dnsmasq. You very likely will not need -# any dhcp-options. If you use Windows clients and Samba, there -# are some options which are recommended, they are detailed at the -# end of this section. - -# Override the default route supplied by dnsmasq, which assumes the -# router is the same machine as the one running dnsmasq. -#dhcp-option=3,1.2.3.4 - -# Do the same thing, but using the option name -#dhcp-option=option:router,1.2.3.4 - -# Override the default route supplied by dnsmasq and send no default -# route at all. Note that this only works for the options sent by -# default (1, 3, 6, 12, 28) the same line will send a zero-length option -# for all other option numbers. -#dhcp-option=3 - -# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 -#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 - -# Set the NTP time server address to be the same machine as -# is running dnsmasq -#dhcp-option=42,0.0.0.0 - -# Set the NIS domain name to "welly" -#dhcp-option=40,welly - -# Set the default time-to-live to 50 -#dhcp-option=23,50 - -# Set the "all subnets are local" flag -#dhcp-option=27,1 - -# Send the etherboot magic flag and then etherboot options (a string). -#dhcp-option=128,e4:45:74:68:00:00 -#dhcp-option=129,NIC=eepro100 - -# Specify an option which will only be sent to the "red" network -# (see dhcp-range for the declaration of the "red" network) -# Note that the tag: part must precede the option: part. -#dhcp-option = tag:red, option:ntp-server, 192.168.1.1 - -# The following DHCP options set up dnsmasq in the same way as is specified -# for the ISC dhcpcd in -# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt -# adapted for a typical dnsmasq installation where the host running -# dnsmasq is also the host running samba. -# you may want to uncomment some or all of them if you use -# Windows clients and Samba. -#dhcp-option=19,0 # option ip-forwarding off -#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s) -#dhcp-option=45,0.0.0.0 # netbios datagram distribution server -#dhcp-option=46,8 # netbios node type - -# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client -# probably doesn't support this...... -#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com - -# Send RFC-3442 classless static routes (note the netmask encoding) -#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 - -# Send vendor-class specific options encapsulated in DHCP option 43. -# The meaning of the options is defined by the vendor-class so -# options are sent only when the client supplied vendor class -# matches the class given here. (A substring match is OK, so "MSFT" -# matches "MSFT" and "MSFT 5.0"). This example sets the -# mtftp address to 0.0.0.0 for PXEClients. -#dhcp-option=vendor:PXEClient,1,0.0.0.0 - -# Send microsoft-specific option to tell windows to release the DHCP lease -# when it shuts down. Note the "i" flag, to tell dnsmasq to send the -# value as a four-byte integer - that's what microsoft wants. See -# http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true -#dhcp-option=vendor:MSFT,2,1i - -# Send the Encapsulated-vendor-class ID needed by some configurations of -# Etherboot to allow is to recognise the DHCP server. -#dhcp-option=vendor:Etherboot,60,"Etherboot" - -# Send options to PXELinux. Note that we need to send the options even -# though they don't appear in the parameter request list, so we need -# to use dhcp-option-force here. -# See http://syslinux.zytor.com/pxe.php#special for details. -# Magic number - needed before anything else is recognised -#dhcp-option-force=208,f1:00:74:7e -# Configuration file name -#dhcp-option-force=209,configs/common -# Path prefix -#dhcp-option-force=210,/tftpboot/pxelinux/files/ -# Reboot time. (Note 'i' to send 32-bit value) -#dhcp-option-force=211,30i - -# Set the boot filename for netboot/PXE. You will only need -# this is you want to boot machines over the network and you will need -# a TFTP server; either dnsmasq's built in TFTP server or an -# external one. (See below for how to enable the TFTP server.) -#dhcp-boot=pxelinux.0 - -# The same as above, but use custom tftp-server instead machine running dnsmasq -#dhcp-boot=pxelinux,server.name,192.168.1.100 - -# Boot for Etherboot gPXE. The idea is to send two different -# filenames, the first loads gPXE, and the second tells gPXE what to -# load. The dhcp-match sets the gpxe tag for requests from gPXE. -#dhcp-match=set:gpxe,175 # gPXE sends a 175 option. -#dhcp-boot=tag:!gpxe,undionly.kpxe -#dhcp-boot=mybootimage - -# Encapsulated options for Etherboot gPXE. All the options are -# encapsulated within option 175 -#dhcp-option=encap:175, 1, 5b # priority code -#dhcp-option=encap:175, 176, 1b # no-proxydhcp -#dhcp-option=encap:175, 177, string # bus-id -#dhcp-option=encap:175, 189, 1b # BIOS drive code -#dhcp-option=encap:175, 190, user # iSCSI username -#dhcp-option=encap:175, 191, pass # iSCSI password - -# Test for the architecture of a netboot client. PXE clients are -# supposed to send their architecture as option 93. (See RFC 4578) -#dhcp-match=peecees, option:client-arch, 0 #x86-32 -#dhcp-match=itanics, option:client-arch, 2 #IA64 -#dhcp-match=hammers, option:client-arch, 6 #x86-64 -#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64 - -# Do real PXE, rather than just booting a single file, this is an -# alternative to dhcp-boot. -#pxe-prompt="What system shall I netboot?" -# or with timeout before first available action is taken: -#pxe-prompt="Press F8 for menu.", 60 - -# Available boot services. for PXE. -#pxe-service=x86PC, "Boot from local disk" - -# Loads /pxelinux.0 from dnsmasq TFTP server. -#pxe-service=x86PC, "Install Linux", pxelinux - -# Loads /pxelinux.0 from TFTP server at 1.2.3.4. -# Beware this fails on old PXE ROMS. -#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4 - -# Use bootserver on network, found my multicast or broadcast. -#pxe-service=x86PC, "Install windows from RIS server", 1 - -# Use bootserver at a known IP address. -#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4 - -# If you have multicast-FTP available, -# information for that can be passed in a similar way using options 1 -# to 5. See page 19 of -# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf - - -# Enable dnsmasq's built-in TFTP server -#enable-tftp - -# Set the root directory for files available via FTP. -#tftp-root=/var/ftpd - -# Make the TFTP server more secure: with this set, only files owned by -# the user dnsmasq is running as will be send over the net. -#tftp-secure - -# This option stops dnsmasq from negotiating a larger blocksize for TFTP -# transfers. It will slow things down, but may rescue some broken TFTP -# clients. -#tftp-no-blocksize - -# Set the boot file name only when the "red" tag is set. -#dhcp-boot=net:red,pxelinux.red-net - -# An example of dhcp-boot with an external TFTP server: the name and IP -# address of the server are given after the filename. -# Can fail with old PXE ROMS. Overridden by --pxe-service. -#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3 - -# If there are multiple external tftp servers having a same name -# (using /etc/hosts) then that name can be specified as the -# tftp_servername (the third option to dhcp-boot) and in that -# case dnsmasq resolves this name and returns the resultant IP -# addresses in round robin fasion. This facility can be used to -# load balance the tftp load among a set of servers. -#dhcp-boot=/var/ftpd/pxelinux.0,boothost,tftp_server_name - -# Set the limit on DHCP leases, the default is 150 -#dhcp-lease-max=150 - -# The DHCP server needs somewhere on disk to keep its lease database. -# This defaults to a sane location, but if you want to change it, use -# the line below. -#dhcp-leasefile=/var/lib/misc/dnsmasq.leases - -# Set the DHCP server to authoritative mode. In this mode it will barge in -# and take over the lease for any client which broadcasts on the network, -# whether it has a record of the lease or not. This avoids long timeouts -# when a machine wakes up on a new network. DO NOT enable this if there's -# the slightest chance that you might end up accidentally configuring a DHCP -# server for your campus/company accidentally. The ISC server uses -# the same option, and this URL provides more information: -# http://www.isc.org/files/auth.html -#dhcp-authoritative - -# Run an executable when a DHCP lease is created or destroyed. -# The arguments sent to the script are "add" or "del", -# then the MAC address, the IP address and finally the hostname -# if there is one. -#dhcp-script=/bin/echo - -# Set the cachesize here. -#cache-size=150 - -# If you want to disable negative caching, uncomment this. -#no-negcache - -# Normally responses which come form /etc/hosts and the DHCP lease -# file have Time-To-Live set as zero, which conventionally means -# do not cache further. If you are happy to trade lower load on the -# server for potentially stale date, you can set a time-to-live (in -# seconds) here. -#local-ttl= - -# If you want dnsmasq to detect attempts by Verisign to send queries -# to unregistered .com and .net hosts to its sitefinder service and -# have dnsmasq instead return the correct NXDOMAIN response, uncomment -# this line. You can add similar lines to do the same for other -# registries which have implemented wildcard A records. -#bogus-nxdomain=64.94.110.11 - -# If you want to fix up DNS results from upstream servers, use the -# alias option. This only works for IPv4. -# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 -#alias=1.2.3.4,5.6.7.8 -# and this maps 1.2.3.x to 5.6.7.x -#alias=1.2.3.0,5.6.7.0,255.255.255.0 -# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40 -#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0 - -# Change these lines if you want dnsmasq to serve MX records. - -# Return an MX record named "maildomain.com" with target -# servermachine.com and preference 50 -#mx-host=maildomain.com,servermachine.com,50 - -# Set the default target for MX records created using the localmx option. -#mx-target=servermachine.com - -# Return an MX record pointing to the mx-target for all local -# machines. -#localmx - -# Return an MX record pointing to itself for all local machines. -#selfmx - -# Change the following lines if you want dnsmasq to serve SRV -# records. These are useful if you want to serve ldap requests for -# Active Directory and other windows-originated DNS requests. -# See RFC 2782. -# You may add multiple srv-host lines. -# The fields are ,,,, -# If the domain part if missing from the name (so that is just has the -# service and protocol sections) then the domain given by the domain= -# config option is used. (Note that expand-hosts does not need to be -# set for this to work.) - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 389 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 - -# A SRV record sending LDAP for the example.com domain to -# ldapserver.example.com port 389 (using domain=) -#domain=example.com -#srv-host=_ldap._tcp,ldapserver.example.com,389 - -# Two SRV records for LDAP, each with different priorities -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 - -# A SRV record indicating that there is no LDAP server for the domain -# example.com -#srv-host=_ldap._tcp.example.com - -# The following line shows how to make dnsmasq serve an arbitrary PTR -# record. This is useful for DNS-SD. (Note that the -# domain-name expansion done for SRV records _does_not -# occur for PTR records.) -#ptr-record=_http._tcp.dns-sd-services,"New Employee Page._http._tcp.dns-sd-services" - -# Change the following lines to enable dnsmasq to serve TXT records. -# These are used for things like SPF and zeroconf. (Note that the -# domain-name expansion done for SRV records _does_not -# occur for TXT records.) - -#Example SPF. -#txt-record=example.com,"v=spf1 a -all" - -#Example zeroconf -#txt-record=_http._tcp.example.com,name=value,paper=A4 - -# Provide an alias for a "local" DNS name. Note that this _only_ works -# for targets which are names from DHCP or /etc/hosts. Give host -# "bert" another name, bertrand -#cname=bertand,bert - -# For debugging purposes, log each DNS query as it passes through -# dnsmasq. -#log-queries - -# Log lots of extra information about DHCP transactions. -#log-dhcp - -# Include a another lot of configuration options. -#conf-file=/etc/dnsmasq.more.conf -#conf-dir=/etc/dnsmasq.d - -listen-address=127.0.0.1 diff --git a/etc/pacman.conf b/etc/pacman.conf deleted file mode 100644 index 284f839e..00000000 --- a/etc/pacman.conf +++ /dev/null @@ -1,100 +0,0 @@ -# -# /etc/pacman.conf -# -# See the pacman.conf(5) manpage for option and repository directives - -# -# GENERAL OPTIONS -# -[options] -# The following paths are commented out with their default values listed. -# If you wish to use different paths, uncomment and update the paths. -#RootDir = / -#DBPath = /var/lib/pacman/ -#CacheDir = /var/cache/pacman/pkg/ -#LogFile = /var/log/pacman.log -#GPGDir = /etc/pacman.d/gnupg/ -HoldPkg = pacman glibc -#XferCommand = /usr/bin/curl -C - -f %u > %o -#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u -#CleanMethod = KeepInstalled -#UseDelta = 0.7 -Architecture = auto - -# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup -#IgnorePkg = -#IgnoreGroup = - -#NoUpgrade = -#NoExtract = - -# Misc options -#UseSyslog -Color -TotalDownload -CheckSpace -VerbosePkgLists -ILoveCandy - -# By default, pacman accepts packages signed by keys that its local keyring -# trusts (see pacman-key and its man page), as well as unsigned packages. -SigLevel = Required DatabaseOptional -LocalFileSigLevel = Optional -#RemoteFileSigLevel = Required - -# NOTE: You must run `pacman-key --init` before first using pacman; the local -# keyring can then be populated with the keys of all official Arch Linux -# packagers with `pacman-key --populate archlinux`. - -# -# REPOSITORIES -# - can be defined here or included from another file -# - pacman will search repositories in the order defined here -# - local/custom mirrors can be added here or in separate files -# - repositories listed first will take precedence when packages -# have identical names, regardless of version number -# - URLs will have $repo replaced by the name of the current repo -# - URLs will have $arch replaced by the name of the architecture -# -# Repository entries are of the format: -# [repo-name] -# Server = ServerName -# Include = IncludePath -# -# The header [repo-name] is crucial - it must be present and -# uncommented to enable the repo. -# - -# The testing repositories are disabled by default. To enable, uncomment the -# repo name header and Include lines. You can add preferred servers immediately -# after the header, and they will be used before the default mirrors. - -#[testing] -#Include = /etc/pacman.d/mirrorlist - -[core] -Include = /etc/pacman.d/mirrorlist - -[extra] -Include = /etc/pacman.d/mirrorlist - -#[community-testing] -#Include = /etc/pacman.d/mirrorlist - -[community] -Include = /etc/pacman.d/mirrorlist - -# If you want to run 32 bit applications on your x86_64 system, -# enable the multilib repositories as required here. - -#[multilib-testing] -#Include = /etc/pacman.d/mirrorlist - -[multilib] -Include = /etc/pacman.d/mirrorlist - -# An example of a custom package repository. See the pacman manpage for -# tips on creating your own repositories. -#[custom] -#SigLevel = Optional TrustAll -#Server = file:///home/custompkgs diff --git a/etc/pulse/daemon.conf b/etc/pulse/daemon.conf deleted file mode 100644 index 6d25c553..00000000 --- a/etc/pulse/daemon.conf +++ /dev/null @@ -1,87 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. - -## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for -## more information. Default values are commented out. Use either ; or # for -## commenting. - -; daemonize = no -; fail = yes -; allow-module-loading = yes -; allow-exit = yes -; use-pid-file = yes -; system-instance = no -; local-server-type = user -; enable-shm = yes -; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB -; lock-memory = no -; cpu-limit = no - -; high-priority = yes -; nice-level = -11 - -; realtime-scheduling = yes -; realtime-priority = 5 - -; exit-idle-time = 20 -; scache-idle-time = 20 - -; dl-search-path = (depends on architecture) - -; load-default-script-file = yes -; default-script-file = /etc/pulse/default.pa - -; log-target = auto -; log-level = notice -; log-meta = no -; log-time = no -; log-backtrace = 0 - -resample-method=speex-float-0 -; resample-method = speex-float-3 -; enable-remixing = yes -; enable-lfe-remixing = no - -flat-volumes = no - -; rlimit-fsize = -1 -; rlimit-data = -1 -; rlimit-stack = -1 -; rlimit-core = -1 -; rlimit-as = -1 -; rlimit-rss = -1 -; rlimit-nproc = -1 -; rlimit-nofile = 256 -; rlimit-memlock = -1 -; rlimit-locks = -1 -; rlimit-sigpending = -1 -; rlimit-msgqueue = -1 -; rlimit-nice = 31 -; rlimit-rtprio = 9 -; rlimit-rttime = 1000000 - -; default-sample-format = s16le -; default-sample-rate = 44100 -; default-sample-channels = 2 -; default-channel-map = front-left,front-right - -; default-fragments = 4 -; default-fragment-size-msec = 25 - -; enable-deferred-volume = yes -; deferred-volume-safety-margin-usec = 8000 -; deferred-volume-extra-delay-usec = 0 diff --git a/etc/pulse/default.pa b/etc/pulse/default.pa deleted file mode 100644 index 686dcab7..00000000 --- a/etc/pulse/default.pa +++ /dev/null @@ -1,167 +0,0 @@ -#!/usr/bin/pulseaudio -nF -# -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -# This startup script is used only if PulseAudio is started per-user -# (i.e. not in system mode) - -.nofail - -### Load something into the sample cache -#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav -#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav -#load-sample-lazy pulse-access /usr/share/sounds/generic.wav - -.fail - -### Automatically restore the volume of streams and devices -load-module module-device-restore -load-module module-stream-restore -load-module module-card-restore - -### Automatically augment property information from .desktop files -### stored in /usr/share/application -load-module module-augment-properties - -### Load audio drivers statically -### (it's probably better to not load these drivers manually, but instead -### use module-udev-detect -- see below -- for doing this automatically) -#load-module module-alsa-sink -#load-module module-alsa-source device=hw:1,0 -#load-module module-oss device="/dev/dsp" sink_name=output source_name=input -#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input -#load-module module-null-sink -#load-module module-pipe-sink - -### Automatically load driver modules depending on the hardware available -.ifexists module-udev-detect.so -load-module module-udev-detect tsched=1 -.else -### Use the static hardware detection module (for systems that lack udev/hal support) -load-module module-detect -.endif - -### Automatically connect sink and source if JACK server is present -.ifexists module-jackdbus-detect.so -.nofail -load-module module-jackdbus-detect -.fail -.endif - -### Automatically load driver modules for Bluetooth hardware -.ifexists module-bluetooth-discover.so -load-module module-bluetooth-discover -.endif - -### Load several protocols -.ifexists module-esound-protocol-unix.so -load-module module-esound-protocol-unix -.endif -load-module module-native-protocol-unix - -### Network access (may be configured with paprefs, so leave this commented -### here if you plan to use paprefs) -#load-module module-esound-protocol-tcp -#load-module module-native-protocol-tcp -#load-module module-zeroconf-publish - -### Load the RTP receiver module (also configured via paprefs, see above) -#load-module module-rtp-recv - -### Load the RTP sender module (also configured via paprefs, see above) -#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" -#load-module module-rtp-send source=rtp.monitor - -### Load additional modules from GConf settings. This can be configured with the paprefs tool. -### Please keep in mind that the modules configured by paprefs might conflict with manually -### loaded modules. -.ifexists module-gconf.so -.nofail -load-module module-gconf -.fail -.endif - -### Automatically restore the default sink/source when changed by the user -### during runtime -### NOTE: This should be loaded as early as possible so that subsequent modules -### that look up the default sink/source get the right value -load-module module-default-device-restore - -### Automatically move streams to the default sink if the sink they are -### connected to dies, similar for sources -load-module module-rescue-streams - -### Make sure we always have a sink around, even if it is a null sink. -load-module module-always-sink - -### Honour intended role device property -load-module module-intended-roles - -### Automatically suspend sinks/sources that become idle for too long -load-module module-suspend-on-idle - -### If autoexit on idle is enabled we want to make sure we only quit -### when no local session needs us anymore. -.ifexists module-console-kit.so -.nofail -load-module module-console-kit -.fail -.endif -.ifexists module-systemd-login.so -load-module module-systemd-login -.endif - -### Enable positioned event sounds -load-module module-position-event-sounds - -### Cork music/video streams when a phone stream is active -load-module module-role-cork - -### Modules to allow autoloading of filters (such as echo cancellation) -### on demand. module-filter-heuristics tries to determine what filters -### make sense, and module-filter-apply does the heavy-lifting of -### loading modules and rerouting streams. -load-module module-filter-heuristics -load-module module-filter-apply - -### Load DBus protocol -.ifexists module-dbus-protocol.so -load-module module-dbus-protocol -.endif - -# X11 modules should not be started from default.pa so that one daemon -# can be shared by multiple sessions. - -### Load X11 bell module -#load-module module-x11-bell sample=bell-windowing-system - -### Register ourselves in the X11 session manager -#load-module module-x11-xsmp - -### Publish connection data in the X11 root window -#.ifexists module-x11-publish.so -#.nofail -#load-module module-x11-publish -#.fail -#.endif - -load-module module-switch-on-port-available - -### Make some devices default -#set-default-sink output -#set-default-source input diff --git a/etc/slim.conf b/etc/slim.conf deleted file mode 100644 index 9a82345a..00000000 --- a/etc/slim.conf +++ /dev/null @@ -1,91 +0,0 @@ -# Path, X server and arguments (if needed) -# Note: -xauth $authfile is automatically appended -default_path /bin:/usr/bin:/usr/local/bin -default_xserver /usr/bin/X -xserver_arguments -nolisten tcp vt07 - -# Commands for halt, login, etc. -halt_cmd /sbin/shutdown -h now -reboot_cmd /sbin/shutdown -r now -console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login" -#suspend_cmd /usr/sbin/suspend - -# Full path to the xauth binary -xauth_path /usr/bin/xauth - -# Xauth file for server -authfile /var/run/slim.auth - - -# Activate numlock when slim starts. Valid values: on|off -# numlock on - -# Hide the mouse cursor (note: does not work with some WMs). -# Valid values: true|false -hidecursor true - -# This command is executed after a succesful login. -# you can place the %session and %theme variables -# to handle launching of specific commands in .xinitrc -# depending of chosen session and slim theme -# -# NOTE: if your system does not have bash you need -# to adjust the command according to your preferred shell, -# i.e. for freebsd use: -# login_cmd exec /bin/sh - ~/.xinitrc %session -login_cmd exec /bin/bash -login ~/.xinitrc %session - -# Commands executed when starting and exiting a session. -# They can be used for registering a X11 session with -# sessreg. You can use the %user variable -# -# sessionstart_cmd some command -# sessionstop_cmd some command - -# Start in daemon mode. Valid values: yes | no -# Note that this can be overriden by the command line -# options "-d" and "-nodaemon" -# daemon yes - -# Available sessions (first one is the default). -# The current chosen session name is replaced in the login_cmd -# above, so your login command can handle different sessions. -# see the xinitrc.sample file shipped with slim sources -sessions awesome,openbox-session,xterm - -# Executed when pressing F11 (requires imagemagick) -screenshot_cmd import -window root /slim.png - -# welcome message. Available variables: %host, %domain -welcome_msg %host - -# Session message. Prepended to the session name when pressing F1 -# session_msg Session: - -# shutdown / reboot messages -shutdown_msg halting -reboot_msg rebooting - -# default user, leave blank or remove this line -# for avoid pre-loading the username. -default_user home - -# Focus the password field on start when default_user is set -# Set to "yes" to enable this feature -#focus_password no - -# Automatically login the default user (without entering -# the password. Set to "yes" to enable this feature -#auto_login no - - -# current theme, use comma separated list to specify a set to -# randomly choose from -current_theme archlinux-simplyblack - -# Lock file -lockfile /var/lock/slim.lock - -# Log file -logfile /var/log/slim.log - -- cgit 1.4.1