From 2a0976b40a2b3888f9ba9f2d047f81b98837dc58 Mon Sep 17 00:00:00 2001 From: June McEnroe Date: Fri, 28 Jun 2019 22:28:32 -0400 Subject: Rename catsh to 1sh Yes it's another rename because I felt like catsh was too long. 1sh is short and unique. --- bin/1sh/1sh-printf.1 | 382 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 382 insertions(+) create mode 100644 bin/1sh/1sh-printf.1 (limited to 'bin/1sh/1sh-printf.1') diff --git a/bin/1sh/1sh-printf.1 b/bin/1sh/1sh-printf.1 new file mode 100644 index 00000000..8ef04674 --- /dev/null +++ b/bin/1sh/1sh-printf.1 @@ -0,0 +1,382 @@ +.\" Copyright (c) 1989, 1990, 1993 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" the Institute of Electrical and Electronics Engineers, Inc. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" @(#)printf.1 8.1 (Berkeley) 6/6/93 +.\" $FreeBSD: releng/12.0/usr.bin/printf/printf.1 314436 2017-02-28 23:42:47Z imp $ +.\" +.Dd April 21, 2014 +.Dt 1SH-PRINTF 1 +.Os +.Sh NAME +.Nm printf +.Nd formatted output +.Sh SYNOPSIS +.Nm +.Ar format Op Ar arguments ... +.Sh DESCRIPTION +The +.Nm +utility formats and prints its arguments, after the first, under control +of the +.Ar format . +The +.Ar format +is a character string which contains three types of objects: plain characters, +which are simply copied to standard output, character escape sequences which +are converted and copied to the standard output, and format specifications, +each of which causes printing of the next successive +.Ar argument . +.Pp +The +.Ar arguments +after the first are treated as strings if the corresponding format is +either +.Cm c , b +or +.Cm s ; +otherwise it is evaluated as a C constant, with the following extensions: +.Pp +.Bl -bullet -offset indent -compact +.It +A leading plus or minus sign is allowed. +.It +If the leading character is a single or double quote, the value is the +character code of the next character. +.El +.Pp +The format string is reused as often as necessary to satisfy the +.Ar arguments . +Any extra format specifications are evaluated with zero or the null +string. +.Pp +Character escape sequences are in backslash notation as defined in the +.St -ansiC , +with extensions. +The characters and their meanings +are as follows: +.Pp +.Bl -tag -width Ds -offset indent -compact +.It Cm \ea +Write a character. +.It Cm \eb +Write a character. +.It Cm \ec +Ignore remaining characters in this string. +.It Cm \ef +Write a character. +.It Cm \en +Write a character. +.It Cm \er +Write a character. +.It Cm \et +Write a character. +.It Cm \ev +Write a character. +.It Cm \e\' +Write a character. +.It Cm \e\e +Write a backslash character. +.It Cm \e Ns Ar num +Write a byte whose +value is the 1-, 2-, or 3-digit +octal number +.Ar num . +Multibyte characters can be constructed using multiple +.Cm \e Ns Ar num +sequences. +.El +.Pp +Each format specification is introduced by the percent character +(``%''). +The remainder of the format specification includes, +in the following order: +.Bl -tag -width Ds +.It "Zero or more of the following flags:" +.Bl -tag -width Ds +.It Cm # +A `#' character +specifying that the value should be printed in an ``alternate form''. +For +.Cm b , c , d , s +and +.Cm u +formats, this option has no effect. +For the +.Cm o +formats the precision of the number is increased to force the first +character of the output string to a zero. +For the +.Cm x +.Pq Cm X +format, a non-zero result has the string +.Li 0x +.Pq Li 0X +prepended to it. +For +.Cm a , A , e , E , f , F , g +and +.Cm G +formats, the result will always contain a decimal point, even if no +digits follow the point (normally, a decimal point only appears in the +results of those formats if a digit follows the decimal point). +For +.Cm g +and +.Cm G +formats, trailing zeros are not removed from the result as they +would otherwise be; +.It Cm \&\- +A minus sign `\-' which specifies +.Em left adjustment +of the output in the indicated field; +.It Cm \&+ +A `+' character specifying that there should always be +a sign placed before the number when using signed formats. +.It Sq \&\ \& +A space specifying that a blank should be left before a positive number +for a signed format. +A `+' overrides a space if both are used; +.It Cm \&0 +A zero `0' character indicating that zero-padding should be used +rather than blank-padding. +A `\-' overrides a `0' if both are used; +.El +.It "Field Width:" +An optional digit string specifying a +.Em field width ; +if the output string has fewer bytes than the field width it will +be blank-padded on the left (or right, if the left-adjustment indicator +has been given) to make up the field width (note that a leading zero +is a flag, but an embedded zero is part of a field width); +.It Precision: +An optional period, +.Sq Cm \&.\& , +followed by an optional digit string giving a +.Em precision +which specifies the number of digits to appear after the decimal point, +for +.Cm e +and +.Cm f +formats, or the maximum number of bytes to be printed +from a string; if the digit string is missing, the precision is treated +as zero; +.It Format: +A character which indicates the type of format to use (one of +.Cm diouxXfFeEgGaAcsb ) . +The uppercase formats differ from their lowercase counterparts only in +that the output of the former is entirely in uppercase. +The floating-point format specifiers +.Pq Cm fFeEgGaA +may be prefixed by an +.Cm L +to request that additional precision be used, if available. +.El +.Pp +A field width or precision may be +.Sq Cm \&* +instead of a digit string. +In this case an +.Ar argument +supplies the field width or precision. +.Pp +The format characters and their meanings are: +.Bl -tag -width Fl +.It Cm diouXx +The +.Ar argument +is printed as a signed decimal (d or i), unsigned octal, unsigned decimal, +or unsigned hexadecimal (X or x), respectively. +.It Cm fF +The +.Ar argument +is printed in the style `[\-]ddd.ddd' where the number of d's +after the decimal point is equal to the precision specification for +the argument. +If the precision is missing, 6 digits are given; if the precision +is explicitly 0, no digits and no decimal point are printed. +The values \*[If] and \*[Na] are printed as +.Ql inf +and +.Ql nan , +respectively. +.It Cm eE +The +.Ar argument +is printed in the style +.Cm e +.Sm off +.Sq Op - Ar d.ddd No \(+- Ar dd +.Sm on +where there +is one digit before the decimal point and the number after is equal to +the precision specification for the argument; when the precision is +missing, 6 digits are produced. +The values \*[If] and \*[Na] are printed as +.Ql inf +and +.Ql nan , +respectively. +.It Cm gG +The +.Ar argument +is printed in style +.Cm f +.Pq Cm F +or in style +.Cm e +.Pq Cm E +whichever gives full precision in minimum space. +.It Cm aA +The +.Ar argument +is printed in style +.Sm off +.Sq Op - Ar h.hhh No \(+- Li p Ar d +.Sm on +where there is one digit before the hexadecimal point and the number +after is equal to the precision specification for the argument; +when the precision is missing, enough digits are produced to convey +the argument's exact double-precision floating-point representation. +The values \*[If] and \*[Na] are printed as +.Ql inf +and +.Ql nan , +respectively. +.It Cm c +The first byte of +.Ar argument +is printed. +.It Cm s +Bytes from the string +.Ar argument +are printed until the end is reached or until the number of bytes +indicated by the precision specification is reached; however if the +precision is 0 or missing, the string is printed entirely. +.It Cm b +As for +.Cm s , +but interpret character escapes in backslash notation in the string +.Ar argument . +The permitted escape sequences are slightly different in that +octal escapes are +.Cm \e0 Ns Ar num +instead of +.Cm \e Ns Ar num . +.It Cm n$ +Allows reordering of the output according to +.Ar argument . +.It Cm \&% +Print a `%'; no argument is used. +.El +.Pp +The decimal point +character is defined in the program's locale (category +.Dv LC_NUMERIC ) . +.Pp +In no case does a non-existent or small field width cause truncation of +a field; padding takes place only if the specified field width exceeds +the actual width. +.Pp +Some shells may provide a builtin +.Nm +command which is similar or identical to this utility. +Consult the +.Xr builtin 1 +manual page. +.Sh EXIT STATUS +.Ex -std +.Sh COMPATIBILITY +The traditional +.Bx +behavior of converting arguments of numeric formats not beginning +with a digit to the +.Tn ASCII +code of the first character is not supported. +.Sh SEE ALSO +.Xr builtin 1 , +.Xr echo 1 , +.Xr sh 1 , +.Xr printf 3 +.Sh STANDARDS +The +.Nm +command is expected to be compatible with the +.St -p1003.2 +specification. +.Sh HISTORY +The +.Nm +command appeared in +.Bx 4.3 Reno . +It is modeled +after the standard library function, +.Xr printf 3 . +.Sh CAVEATS +.Tn ANSI +hexadecimal character constants were deliberately not provided. +.Pp +Trying to print a dash ("-") as the first character causes +.Nm +to interpret the dash as a program argument. +.Nm -- +must be used before +.Ar format . +.Pp +If the locale contains multibyte characters +(such as UTF-8), +the +.Cm c +format and +.Cm b +and +.Cm s +formats with a precision +may not operate as expected. +.Sh BUGS +Since the floating point numbers are translated from +.Tn ASCII +to floating-point and +then back again, floating-point precision may be lost. +(By default, the number is translated to an IEEE-754 double-precision +value before being printed. +The +.Cm L +modifier may produce additional precision, depending on the hardware platform.) +.Pp +The escape sequence \e000 is the string terminator. +When present in the argument for the +.Cm b +format, the argument will be truncated at the \e000 character. +.Pp +Multibyte characters are not recognized in format strings (this is only +a problem if +.Ql % +can appear inside a multibyte character). -- cgit 1.4.1