From 4ff38caa83d5f8f5bc36ff0baa4fa4b3895b1f4f Mon Sep 17 00:00:00 2001 From: June McEnroe Date: Tue, 15 Mar 2022 22:26:11 -0400 Subject: Remove dash Moved to https://git.causal.agency/dash/ and jorts. --- bin/dash/src/dash.1 | 2361 --------------------------------------------------- 1 file changed, 2361 deletions(-) delete mode 100644 bin/dash/src/dash.1 (limited to 'bin/dash/src/dash.1') diff --git a/bin/dash/src/dash.1 b/bin/dash/src/dash.1 deleted file mode 100644 index 9bc51cd6..00000000 --- a/bin/dash/src/dash.1 +++ /dev/null @@ -1,2361 +0,0 @@ -.\" Copyright (c) 1991, 1993 -.\" The Regents of the University of California. All rights reserved. -.\" Copyright (c) 1997-2005 -.\" Herbert Xu . All rights reserved. -.\" -.\" This code is derived from software contributed to Berkeley by -.\" Kenneth Almquist. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. Neither the name of the University nor the names of its contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" @(#)sh.1 8.6 (Berkeley) 5/4/95 -.\" -.Dd December 22, 2020 -.Os -.Dt DASH 1 -.Sh NAME -.Nm dash -.Nd command interpreter (shell) -.Sh SYNOPSIS -.Nm -.Bk -words -.Op Fl aCefnuvxIimqVEb -.Op Cm +aCefnuvxIimqVEb -.Ek -.Bk -words -.Op Fl o Ar option_name -.Op Cm +o Ar option_name -.Ek -.Bk -words -.Op Ar command_file Oo Ar argument ... Oc -.Ek -.Nm -.Fl c -.Bk -words -.Op Fl aCefnuvxIimqVEb -.Op Cm +aCefnuvxIimqVEb -.Ek -.Bk -words -.Op Fl o Ar option_name -.Op Cm +o Ar option_name -.Ek -.Bk -words -.Ar command_string -.Op Ar command_name Oo Ar argument ... Oc -.Ek -.Nm -.Fl s -.Bk -words -.Op Fl aCefnuvxIimqVEb -.Op Cm +aCefnuvxIimqVEb -.Ek -.Bk -words -.Op Fl o Ar option_name -.Op Cm +o Ar option_name -.Ek -.Bk -words -.Op Ar argument ... -.Ek -.Sh DESCRIPTION -.Nm -is the standard command interpreter for the system. -The current version of -.Nm -is in the process of being changed to conform with the -.Tn POSIX -1003.2 and 1003.2a specifications for the shell. -This version has many -features which make it appear similar in some respects to the Korn shell, -but it is not a Korn shell clone (see -.Xr ksh 1 ) . -Only features designated by -.Tn POSIX , -plus a few Berkeley extensions, are being incorporated into this shell. -This man page is not intended -to be a tutorial or a complete specification of the shell. -.Ss Overview -The shell is a command that reads lines from either a file or the -terminal, interprets them, and generally executes other commands. -It is the program that is running when a user logs into the system -(although a user can select a different shell with the -.Xr chsh 1 -command). -The shell implements a language that has flow control -constructs, a macro facility that provides a variety of features in -addition to data storage, along with built in history and line editing -capabilities. -It incorporates many features to aid interactive use and -has the advantage that the interpretative language is common to both -interactive and non-interactive use (shell scripts). -That is, commands -can be typed directly to the running shell or can be put into a file and -the file can be executed directly by the shell. -.Ss Invocation -If no args are present and if the standard input of the shell -is connected to a terminal (or if the -.Fl i -flag is set), -and the -.Fl c -option is not present, the shell is considered an interactive shell. -An interactive shell generally prompts before each command and handles -programming and command errors differently (as described below). -When first starting, -the shell inspects argument 0, and if it begins with a dash -.Sq - , -the shell is also considered -a login shell. -This is normally done automatically by the system -when the user first logs in. -A login shell first reads commands -from the files -.Pa /etc/profile -and -.Pa .profile -if they exist. -If the environment variable -.Ev ENV -is set on entry to an interactive shell, or is set in the -.Pa .profile -of a login shell, the shell next reads -commands from the file named in -.Ev ENV . -Therefore, a user should place commands that are to be executed only at -login time in the -.Pa .profile -file, and commands that are executed for every interactive shell inside the -.Ev ENV -file. -To set the -.Ev ENV -variable to some file, place the following line in your -.Pa .profile -of your home directory -.Pp -.Dl ENV=$HOME/.shinit; export ENV -.Pp -substituting for -.Dq .shinit -any filename you wish. -.Pp -If command line arguments besides the options have been specified, then -the shell treats the first argument as the name of a file from which to -read commands (a shell script), and the remaining arguments are set as the -positional parameters of the shell ($1, $2, etc). -Otherwise, the shell -reads commands from its standard input. -.Ss Argument List Processing -All of the single letter options that have a corresponding name can be -used as an argument to the -.Fl o -option. -The set -.Fl o -name is provided next to the single letter option in -the description below. -Specifying a dash -.Dq - -turns the option on, while using a plus -.Dq + -disables the option. -The following options can be set from the command line or -with the -.Ic set -builtin (described later). -.Bl -tag -width aaaallexportfoo -offset indent -.It Fl a Em allexport -Export all variables assigned to. -.It Fl c -Read commands from the -.Ar command_string -operand instead of from the standard input. -Special parameter 0 will be set from the -.Ar command_name -operand and the positional parameters ($1, $2, etc.) -set from the remaining argument operands. -.It Fl C Em noclobber -Don't overwrite existing files with -.Dq \*[Gt] . -.It Fl e Em errexit -If not interactive, exit immediately if any untested command fails. -The exit status of a command is considered to be -explicitly tested if the command is used to control an -.Ic if , -.Ic elif , -.Ic while , -or -.Ic until ; -or if the command is the left hand operand of an -.Dq && -or -.Dq || -operator. -.It Fl f Em noglob -Disable pathname expansion. -.It Fl n Em noexec -If not interactive, read commands but do not execute them. -This is useful for checking the syntax of shell scripts. -.It Fl u Em nounset -Write a message to standard error when attempting to expand a variable -that is not set, and if the shell is not interactive, exit immediately. -.It Fl v Em verbose -The shell writes its input to standard error as it is read. -Useful for debugging. -.It Fl x Em xtrace -Write each command to standard error (preceded by a -.Sq +\ ) -before it is executed. -Useful for debugging. -.It Fl I Em ignoreeof -Ignore EOF's from input when interactive. -.It Fl i Em interactive -Force the shell to behave interactively. -.It Fl l -Make dash act as if it had been invoked as a login shell. -.It Fl m Em monitor -Turn on job control (set automatically when interactive). -.It Fl s Em stdin -Read commands from standard input (set automatically if no file arguments -are present). -This option has no effect when set after the shell has -already started running (i.e. with -.Ic set ) . -.It Fl V Em vi -Enable the built-in -.Xr vi 1 -command line editor (disables -.Fl E -if it has been set). -.It Fl E Em emacs -Enable the built-in -.Xr emacs 1 -command line editor (disables -.Fl V -if it has been set). -.It Fl b Em notify -Enable asynchronous notification of background job completion. -(UNIMPLEMENTED for 4.4alpha) -.El -.Ss Lexical Structure -The shell reads input in terms of lines from a file and breaks it up into -words at whitespace (blanks and tabs), and at certain sequences of -characters that are special to the shell called -.Dq operators . -There are two types of operators: control operators and redirection -operators (their meaning is discussed later). -Following is a list of operators: -.Bl -ohang -offset indent -.It "Control operators:" -.Dl & && \&( \&) \&; ;; | || \*[Lt]newline\*[Gt] -.It "Redirection operators:" -.Dl \*[Lt] \*[Gt] \*[Gt]| \*[Lt]\*[Lt] \*[Gt]\*[Gt] \*[Lt]& \*[Gt]& \*[Lt]\*[Lt]- \*[Lt]\*[Gt] -.El -.Ss Quoting -Quoting is used to remove the special meaning of certain characters or -words to the shell, such as operators, whitespace, or keywords. -There are three types of quoting: matched single quotes, -matched double quotes, and backslash. -.Ss Backslash -A backslash preserves the literal meaning of the following -character, with the exception of -.Aq newline . -A backslash preceding a -.Aq newline -is treated as a line continuation. -.Ss Single Quotes -Enclosing characters in single quotes preserves the literal meaning of all -the characters (except single quotes, making it impossible to put -single-quotes in a single-quoted string). -.Ss Double Quotes -Enclosing characters within double quotes preserves the literal -meaning of all characters except dollarsign -.Pq $ , -backquote -.Pq ` , -and backslash -.Pq \e . -The backslash inside double quotes is historically weird, and serves to -quote only the following characters: -.Dl $ ` \*q \e \*[Lt]newline\*[Gt] . -Otherwise it remains literal. -.Ss Reserved Words -Reserved words are words that have special meaning to the -shell and are recognized at the beginning of a line and -after a control operator. -The following are reserved words: -.Bl -column while while while while while -offset indent -.It ! Ta elif Ta fi Ta while Ta case -.It else Ta for Ta then Ta { Ta } -.It do Ta done Ta until Ta if Ta esac -.El -.Pp -Their meaning is discussed later. -.Ss Aliases -An alias is a name and corresponding value set using the -.Xr alias 1 -builtin command. -Whenever a reserved word may occur (see above), -and after checking for reserved words, the shell -checks the word to see if it matches an alias. -If it does, it replaces it in the input stream with its value. -For example, if there is an alias called -.Dq lf -with the value -.Dq "ls -F" , -then the input: -.Pp -.Dl lf foobar Aq return -.Pp -would become -.Pp -.Dl ls -F foobar Aq return -.Pp -Aliases provide a convenient way for naive users to create shorthands for -commands without having to learn how to create functions with arguments. -They can also be used to create lexically obscure code. -This use is discouraged. -.Ss Commands -The shell interprets the words it reads according to a language, the -specification of which is outside the scope of this man page (refer to the -BNF in the -.Tn POSIX -1003.2 document). -Essentially though, a line is read and if the first -word of the line (or after a control operator) is not a reserved word, -then the shell has recognized a simple command. -Otherwise, a complex -command or some other special construct may have been recognized. -.Ss Simple Commands -If a simple command has been recognized, the shell performs -the following actions: -.Bl -enum -offset indent -.It -Leading words of the form -.Dq name=value -are stripped off and assigned to the environment of the simple command. -Redirection operators and their arguments (as described below) are -stripped off and saved for processing. -.It -The remaining words are expanded as described in -the section called -.Dq Expansions , -and the first remaining word is considered the command name and the -command is located. -The remaining words are considered the arguments of the command. -If no command name resulted, then the -.Dq name=value -variable assignments recognized in item 1 affect the current shell. -.It -Redirections are performed as described in the next section. -.El -.Ss Redirections -Redirections are used to change where a command reads its input or sends -its output. -In general, redirections open, close, or duplicate an -existing reference to a file. -The overall format used for redirection is: -.Pp -.Dl [n] Va redir-op Ar file -.Pp -where -.Va redir-op -is one of the redirection operators mentioned previously. -Following is a list of the possible redirections. -The -.Bq n -is an optional number between 0 and 9, as in -.Sq 3 -(not -.Sq Bq 3 ) , -that refers to a file descriptor. -.Bl -tag -width aaabsfiles -offset indent -.It [n] Ns \*[Gt] file -Redirect standard output (or n) to file. -.It [n] Ns \*[Gt]| file -Same, but override the -.Fl C -option. -.It [n] Ns \*[Gt]\*[Gt] file -Append standard output (or n) to file. -.It [n] Ns \*[Lt] file -Redirect standard input (or n) from file. -.It [n1] Ns \*[Lt]& Ns n2 -Copy file descriptor n2 as stdout (or fd n1). -fd n2. -.It [n] Ns \*[Lt]&- -Close standard input (or n). -.It [n1] Ns \*[Gt]& Ns n2 -Copy file descriptor n2 as stdin (or fd n1). -fd n2. -.It [n] Ns \*[Gt]&- -Close standard output (or n). -.It [n] Ns \*[Lt]\*[Gt] file -Open file for reading and writing on standard input (or n). -.El -.Pp -The following redirection is often called a -.Dq here-document . -.Bl -item -offset indent -.It -.Li [n]\*[Lt]\*[Lt] delimiter -.Dl here-doc-text ... -.Li delimiter -.El -.Pp -All the text on successive lines up to the delimiter is saved away and -made available to the command on standard input, or file descriptor n if -it is specified. -If the delimiter as specified on the initial line is -quoted, then the here-doc-text is treated literally, otherwise the text is -subjected to parameter expansion, command substitution, and arithmetic -expansion (as described in the section on -.Dq Expansions ) . -If the operator is -.Dq \*[Lt]\*[Lt]- -instead of -.Dq \*[Lt]\*[Lt] , -then leading tabs in the here-doc-text are stripped. -.Ss Search and Execution -There are three types of commands: shell functions, builtin commands, and -normal programs -- and the command is searched for (by name) in that order. -They each are executed in a different way. -.Pp -When a shell function is executed, all of the shell positional parameters -(except $0, which remains unchanged) are set to the arguments of the shell -function. -The variables which are explicitly placed in the environment of -the command (by placing assignments to them before the function name) are -made local to the function and are set to the values given. -Then the command given in the function definition is executed. -The positional parameters are restored to their original values -when the command completes. -This all occurs within the current shell. -.Pp -Shell builtins are executed internally to the shell, without spawning a -new process. -.Pp -Otherwise, if the command name doesn't match a function or builtin, the -command is searched for as a normal program in the file system (as -described in the next section). -When a normal program is executed, the shell runs the program, -passing the arguments and the environment to the program. -If the program is not a normal executable file (i.e., if it does -not begin with the "magic number" whose -.Tn ASCII -representation is "#!", so -.Xr execve 2 -returns -.Er ENOEXEC -then) the shell will interpret the program in a subshell. -The child shell will reinitialize itself in this case, -so that the effect will be as if a -new shell had been invoked to handle the ad-hoc shell script, except that -the location of hashed commands located in the parent shell will be -remembered by the child. -.Pp -Note that previous versions of this document and the source code itself -misleadingly and sporadically refer to a shell script without a magic -number as a "shell procedure". -.Ss Path Search -When locating a command, the shell first looks to see if it has a shell -function by that name. -Then it looks for a builtin command by that name. -If a builtin command is not found, one of two things happen: -.Bl -enum -.It -Command names containing a slash are simply executed without performing -any searches. -.It -The shell searches each entry in -.Ev PATH -in turn for the command. -The value of the -.Ev PATH -variable should be a series of entries separated by colons. -Each entry consists of a directory name. -The current directory may be indicated -implicitly by an empty directory name, or explicitly by a single period. -.El -.Ss Command Exit Status -Each command has an exit status that can influence the behaviour -of other shell commands. -The paradigm is that a command exits -with zero for normal or success, and non-zero for failure, -error, or a false indication. -The man page for each command -should indicate the various exit codes and what they mean. -Additionally, the builtin commands return exit codes, as does -an executed shell function. -.Pp -If a command consists entirely of variable assignments then the -exit status of the command is that of the last command substitution -if any, otherwise 0. -.Ss Complex Commands -Complex commands are combinations of simple commands with control -operators or reserved words, together creating a larger complex command. -More generally, a command is one of the following: -.Bl -bullet -.It -simple command -.It -pipeline -.It -list or compound-list -.It -compound command -.It -function definition -.El -.Pp -Unless otherwise stated, the exit status of a command is that of the last -simple command executed by the command. -.Ss Pipelines -A pipeline is a sequence of one or more commands separated -by the control operator |. -The standard output of all but -the last command is connected to the standard input -of the next command. -The standard output of the last -command is inherited from the shell, as usual. -.Pp -The format for a pipeline is: -.Pp -.Dl [!] command1 [ | command2 ...] -.Pp -The standard output of command1 is connected to the standard input of -command2. -The standard input, standard output, or both of a command is -considered to be assigned by the pipeline before any redirection specified -by redirection operators that are part of the command. -.Pp -If the pipeline is not in the background (discussed later), the shell -waits for all commands to complete. -.Pp -If the reserved word ! does not precede the pipeline, the exit status is -the exit status of the last command specified in the pipeline. -Otherwise, the exit status is the logical NOT of the exit status of the -last command. -That is, if the last command returns zero, the exit status -is 1; if the last command returns greater than zero, the exit status is -zero. -.Pp -Because pipeline assignment of standard input or standard output or both -takes place before redirection, it can be modified by redirection. -For example: -.Pp -.Dl $ command1 2\*[Gt]&1 | command2 -.Pp -sends both the standard output and standard error of command1 -to the standard input of command2. -.Pp -A ; or -.Aq newline -terminator causes the preceding AND-OR-list (described -next) to be executed sequentially; a & causes asynchronous execution of -the preceding AND-OR-list. -.Pp -Note that unlike some other shells, each process in the pipeline is a -child of the invoking shell (unless it is a shell builtin, in which case -it executes in the current shell -- but any effect it has on the -environment is wiped). -.Ss Background Commands -- & -If a command is terminated by the control operator ampersand (&), the -shell executes the command asynchronously -- that is, the shell does not -wait for the command to finish before executing the next command. -.Pp -The format for running a command in background is: -.Pp -.Dl command1 & [command2 & ...] -.Pp -If the shell is not interactive, the standard input of an asynchronous -command is set to -.Pa /dev/null . -.Ss Lists -- Generally Speaking -A list is a sequence of zero or more commands separated by newlines, -semicolons, or ampersands, and optionally terminated by one of these three -characters. -The commands in a list are executed in the order they are written. -If command is followed by an ampersand, the shell starts the -command and immediately proceeds onto the next command; otherwise it waits -for the command to terminate before proceeding to the next one. -.Ss Short-Circuit List Operators -.Dq && -and -.Dq || -are AND-OR list operators. -.Dq && -executes the first command, and then executes the second command if and only -if the exit status of the first command is zero. -.Dq || -is similar, but executes the second command if and only if the exit status -of the first command is nonzero. -.Dq && -and -.Dq || -both have the same priority. -.Ss Flow-Control Constructs -- if, while, for, case -The syntax of the if command is -.Bd -literal -offset indent -if list -then list -[ elif list -then list ] ... -[ else list ] -fi -.Ed -.Pp -The syntax of the while command is -.Bd -literal -offset indent -while list -do list -done -.Ed -.Pp -The two lists are executed repeatedly while the exit status of the -first list is zero. -The until command is similar, but has the word -until in place of while, which causes it to -repeat until the exit status of the first list is zero. -.Pp -The syntax of the for command is -.Bd -literal -offset indent -for variable [ in [ word ... ] ] -do list -done -.Ed -.Pp -The words following -.Pa in -are expanded, and then the list is executed repeatedly with the -variable set to each word in turn. -Omitting in word ... is equivalent to in "$@". -.Pp -The syntax of the break and continue command is -.Bd -literal -offset indent -break [ num ] -continue [ num ] -.Ed -.Pp -Break terminates the num innermost for or while loops. -Continue continues with the next iteration of the innermost loop. -These are implemented as builtin commands. -.Pp -The syntax of the case command is -.Bd -literal -offset indent -case word in -[(]pattern) list ;; -\&... -esac -.Ed -.Pp -The pattern can actually be one or more patterns (see -.Sx Shell Patterns -described later), separated by -.Dq \*(Ba -characters. -The -.Do -( -.Dc -character before the pattern is optional. -.Ss Grouping Commands Together -Commands may be grouped by writing either -.Pp -.Dl (list) -.Pp -or -.Pp -.Dl { list; } -.Pp -The first of these executes the commands in a subshell. -Builtin commands grouped into a (list) will not affect the current shell. -The second form does not fork another shell so is slightly more efficient. -Grouping commands together this way allows you to redirect -their output as though they were one program: -.Pp -.Bd -literal -offset indent -{ printf \*q hello \*q ; printf \*q world\\n" ; } \*[Gt] greeting -.Ed -.Pp -Note that -.Dq } -must follow a control operator (here, -.Dq \&; ) -so that it is recognized as a reserved word and not as another command argument. -.Ss Functions -The syntax of a function definition is -.Pp -.Dl name ( ) command -.Pp -A function definition is an executable statement; when executed it -installs a function named name and returns an exit status of zero. -The command is normally a list enclosed between -.Dq { -and -.Dq } . -.Pp -Variables may be declared to be local to a function by using a local -command. -This should appear as the first statement of a function, and the syntax is -.Pp -.Dl local [ variable | - ] ... -.Pp -Local is implemented as a builtin command. -.Pp -When a variable is made local, it inherits the initial value and exported -and readonly flags from the variable with the same name in the surrounding -scope, if there is one. -Otherwise, the variable is initially unset. -The shell uses dynamic scoping, so that if you make the variable x local to -function f, which then calls function g, references to the variable x made -inside g will refer to the variable x declared inside f, not to the global -variable named x. -.Pp -The only special parameter that can be made local is -.Dq - . -Making -.Dq - -local any shell options that are changed via the set command inside the -function to be restored to their original values when the function -returns. -.Pp -The syntax of the return command is -.Pp -.Dl return [ exitstatus ] -.Pp -It terminates the currently executing function. -Return is implemented as a builtin command. -.Ss Variables and Parameters -The shell maintains a set of parameters. -A parameter denoted by a name is called a variable. -When starting up, the shell turns all the environment -variables into shell variables. -New variables can be set using the form -.Pp -.Dl name=value -.Pp -Variables set by the user must have a name consisting solely of -alphabetics, numerics, and underscores - the first of which must not be -numeric. -A parameter can also be denoted by a number or a special -character as explained below. -.Ss Positional Parameters -A positional parameter is a parameter denoted by a number (n \*[Gt] 0). -The shell sets these initially to the values of its command line arguments -that follow the name of the shell script. -The -.Ic set -builtin can also be used to set or reset them. -.Ss Special Parameters -A special parameter is a parameter denoted by one of the following special -characters. -The value of the parameter is listed next to its character. -.Bl -tag -width thinhyphena -.It * -Expands to the positional parameters, starting from one. -When the -expansion occurs within a double-quoted string it expands to a single -field with the value of each parameter separated by the first character of -the -.Ev IFS -variable, or by a -.Aq space -if -.Ev IFS -is unset. -.It @ -Expands to the positional parameters, starting from one. -When the expansion occurs within double-quotes, each positional -parameter expands as a separate argument. -If there are no positional parameters, the -expansion of @ generates zero arguments, even when @ is -double-quoted. -What this basically means, for example, is -if $1 is -.Dq abc -and $2 is -.Dq def ghi , -then -.Qq $@ -expands to -the two arguments: -.Pp -.Sm off -.Dl \*q abc \*q \ \*q def\ ghi \*q -.Sm on -.It # -Expands to the number of positional parameters. -.It ? -Expands to the exit status of the most recent pipeline. -.It - (Hyphen.) -Expands to the current option flags (the single-letter -option names concatenated into a string) as specified on -invocation, by the set builtin command, or implicitly -by the shell. -.It $ -Expands to the process ID of the invoked shell. -A subshell retains the same value of $ as its parent. -.It ! -Expands to the process ID of the most recent background -command executed from the current shell. -For a pipeline, the process ID is that of the last command in the pipeline. -.It 0 (Zero.) -Expands to the name of the shell or shell script. -.El -.Ss Word Expansions -This clause describes the various expansions that are performed on words. -Not all expansions are performed on every word, as explained later. -.Pp -Tilde expansions, parameter expansions, command substitutions, arithmetic -expansions, and quote removals that occur within a single word expand to a -single field. -It is only field splitting or pathname expansion that can -create multiple fields from a single word. -The single exception to this -rule is the expansion of the special parameter @ within double-quotes, as -was described above. -.Pp -The order of word expansion is: -.Bl -enum -.It -Tilde Expansion, Parameter Expansion, Command Substitution, -Arithmetic Expansion (these all occur at the same time). -.It -Field Splitting is performed on fields -generated by step (1) unless the -.Ev IFS -variable is null. -.It -Pathname Expansion (unless set -.Fl f -is in effect). -.It -Quote Removal. -.El -.Pp -The $ character is used to introduce parameter expansion, command -substitution, or arithmetic evaluation. -.Ss Tilde Expansion (substituting a user's home directory) -A word beginning with an unquoted tilde character (~) is -subjected to tilde expansion. -All the characters up to -a slash (/) or the end of the word are treated as a username -and are replaced with the user's home directory. -If the username is missing (as in -.Pa ~/foobar ) , -the tilde is replaced with the value of the -.Va HOME -variable (the current user's home directory). -.Ss Parameter Expansion -The format for parameter expansion is as follows: -.Pp -.Dl ${expression} -.Pp -where expression consists of all characters until the matching -.Dq } . -Any -.Dq } -escaped by a backslash or within a quoted string, and characters in -embedded arithmetic expansions, command substitutions, and variable -expansions, are not examined in determining the matching -.Dq } . -.Pp -The simplest form for parameter expansion is: -.Pp -.Dl ${parameter} -.Pp -The value, if any, of parameter is substituted. -.Pp -The parameter name or symbol can be enclosed in braces, which are -optional except for positional parameters with more than one digit or -when parameter is followed by a character that could be interpreted as -part of the name. -If a parameter expansion occurs inside double-quotes: -.Bl -enum -.It -Pathname expansion is not performed on the results of the expansion. -.It -Field splitting is not performed on the results of the -expansion, with the exception of @. -.El -.Pp -In addition, a parameter expansion can be modified by using one of the -following formats. -.Bl -tag -width aaparameterwordaaaaa -.It ${parameter:-word} -Use Default Values. -If parameter is unset or null, the expansion of word -is substituted; otherwise, the value of parameter is substituted. -.It ${parameter:=word} -Assign Default Values. -If parameter is unset or null, the expansion of -word is assigned to parameter. -In all cases, the final value of parameter is substituted. -Only variables, not positional parameters or special -parameters, can be assigned in this way. -.It ${parameter:?[word]} -Indicate Error if Null or Unset. -If parameter is unset or null, the -expansion of word (or a message indicating it is unset if word is omitted) -is written to standard error and the shell exits with a nonzero exit status. -Otherwise, the value of parameter is substituted. -An interactive shell need not exit. -.It ${parameter:+word} -Use Alternative Value. -If parameter is unset or null, null is -substituted; otherwise, the expansion of word is substituted. -.El -.Pp -In the parameter expansions shown previously, use of the colon in the -format results in a test for a parameter that is unset or null; omission -of the colon results in a test for a parameter that is only unset. -.Bl -tag -width aaparameterwordaaaaa -.It ${#parameter} -String Length. -The length in characters of the value of parameter. -.El -.Pp -The following four varieties of parameter expansion provide for substring -processing. -In each case, pattern matching notation (see -.Sx Shell Patterns ) , -rather than regular expression notation, is used to evaluate the patterns. -If parameter is * or @, the result of the expansion is unspecified. -Enclosing the full parameter expansion string in double-quotes does not -cause the following four varieties of pattern characters to be quoted, -whereas quoting characters within the braces has this effect. -.Bl -tag -width aaparameterwordaaaaa -.It ${parameter%word} -Remove Smallest Suffix Pattern. -The word is expanded to produce a pattern. -The parameter expansion then results in parameter, with the -smallest portion of the suffix matched by the pattern deleted. -.It ${parameter%%word} -Remove Largest Suffix Pattern. -The word is expanded to produce a pattern. -The parameter expansion then results in parameter, with the largest -portion of the suffix matched by the pattern deleted. -.It ${parameter#word} -Remove Smallest Prefix Pattern. -The word is expanded to produce a pattern. -The parameter expansion then results in parameter, with the -smallest portion of the prefix matched by the pattern deleted. -.It ${parameter##word} -Remove Largest Prefix Pattern. -The word is expanded to produce a pattern. -The parameter expansion then results in parameter, with the largest -portion of the prefix matched by the pattern deleted. -.El -.Ss Command Substitution -Command substitution allows the output of a command to be substituted in -place of the command name itself. -Command substitution occurs when the command is enclosed as follows: -.Pp -.Dl $(command) -.Pp -or -.Po -.Dq backquoted -version -.Pc : -.Pp -.Dl `command` -.Pp -The shell expands the command substitution by executing command in a -subshell environment and replacing the command substitution with the -standard output of the command, removing sequences of one or more -.Ao newline Ac Ns s -at the end of the substitution. -(Embedded -.Ao newline Ac Ns s -before -the end of the output are not removed; however, during field splitting, -they may be translated into -.Ao space Ac Ns s , -depending on the value of -.Ev IFS -and quoting that is in effect.) -.Ss Arithmetic Expansion -Arithmetic expansion provides a mechanism for evaluating an arithmetic -expression and substituting its value. -The format for arithmetic expansion is as follows: -.Pp -.Dl $((expression)) -.Pp -The expression is treated as if it were in double-quotes, except -that a double-quote inside the expression is not treated specially. -The shell expands all tokens in the expression for parameter expansion, -command substitution, and quote removal. -.Pp -Next, the shell treats this as an arithmetic expression and -substitutes the value of the expression. -.Ss White Space Splitting (Field Splitting) -After parameter expansion, command substitution, and -arithmetic expansion the shell scans the results of -expansions and substitutions that did not occur in double-quotes for -field splitting and multiple fields can result. -.Pp -The shell treats each character of the -.Ev IFS -as a delimiter and uses the delimiters to split the results of parameter -expansion and command substitution into fields. -.Ss Pathname Expansion (File Name Generation) -Unless the -.Fl f -flag is set, file name generation is performed after word splitting is -complete. -Each word is viewed as a series of patterns, separated by slashes. -The process of expansion replaces the word with the names of all -existing files whose names can be formed by replacing each pattern with a -string that matches the specified pattern. -There are two restrictions on -this: first, a pattern cannot match a string containing a slash, and -second, a pattern cannot match a string starting with a period unless the -first character of the pattern is a period. -The next section describes the -patterns used for both Pathname Expansion and the -.Ic case -command. -.Ss Shell Patterns -A pattern consists of normal characters, which match themselves, -and meta-characters. -The meta-characters are -.Dq \&! , -.Dq * , -.Dq \&? , -and -.Dq \&[ . -These characters lose their special meanings if they are quoted. -When command or variable substitution is performed -and the dollar sign or back quotes are not double quoted, -the value of the variable or the output of -the command is scanned for these characters and they are turned into -meta-characters. -.Pp -An asterisk -.Pq Dq * -matches any string of characters. -A question mark matches any single character. -A left bracket -.Pq Dq \&[ -introduces a character class. -The end of the character class is indicated by a -.Pq Dq \&] ; -if the -.Dq \&] -is missing then the -.Dq \&[ -matches a -.Dq \&[ -rather than introducing a character class. -A character class matches any of the characters between the square brackets. -A range of characters may be specified using a minus sign. -The character class may be complemented -by making an exclamation point the first character of the character class. -.Pp -To include a -.Dq \&] -in a character class, make it the first character listed (after the -.Dq \&! , -if any). -To include a minus sign, make it the first or last character listed. -.Ss Builtins -This section lists the builtin commands which are builtin because they -need to perform some operation that can't be performed by a separate -process. -In addition to these, there are several other commands that may -be builtin for efficiency (e.g. -.Xr printf 1 , -.Xr echo 1 , -.Xr test 1 , -etc). -.Bl -tag -width 5n -.It : -.It true -A null command that returns a 0 (true) exit value. -.It \&. file -The commands in the specified file are read and executed by the shell. -.It alias Op Ar name Ns Op Ar "=string ..." -If -.Ar name=string -is specified, the shell defines the alias -.Ar name -with value -.Ar string . -If just -.Ar name -is specified, the value of the alias -.Ar name -is printed. -With no arguments, the -.Ic alias -builtin prints the -names and values of all defined aliases (see -.Ic unalias ) . -.It bg [ Ar job ] ... -Continue the specified jobs (or the current job if no -jobs are given) in the background. -.It Xo command -.Op Fl p -.Op Fl v -.Op Fl V -.Ar command -.Op Ar arg ... -.Xc -Execute the specified command but ignore shell functions when searching -for it. -(This is useful when you -have a shell function with the same name as a builtin command.) -.Bl -tag -width 5n -.It Fl p -search for command using a -.Ev PATH -that guarantees to find all the standard utilities. -.It Fl V -Do not execute the command but -search for the command and print the resolution of the -command search. -This is the same as the type builtin. -.It Fl v -Do not execute the command but -search for the command and print the absolute pathname -of utilities, the name for builtins or the expansion of aliases. -.El -.It cd Ar - -.It Xo cd Op Fl LP -.Op Ar directory -.Xc -Switch to the specified directory (default -.Ev HOME ) . -If an entry for -.Ev CDPATH -appears in the environment of the -.Ic cd -command or the shell variable -.Ev CDPATH -is set and the directory name does not begin with a slash, then the -directories listed in -.Ev CDPATH -will be searched for the specified directory. -The format of -.Ev CDPATH -is the same as that of -.Ev PATH . -If a single dash is specified as the argument, it will be replaced by the -value of -.Ev OLDPWD . -The -.Ic cd -command will print out the name of the -directory that it actually switched to if this is different from the name -that the user gave. -These may be different either because the -.Ev CDPATH -mechanism was used or because the argument is a single dash. -The -.Fl P -option causes the physical directory structure to be used, that is, all -symbolic links are resolved to their respective values. The -.Fl L -option turns off the effect of any preceding -.Fl P -options. -.It Xo echo Op Fl n -.Ar args... -.Xc -Print the arguments on the standard output, separated by spaces. -Unless the -.Fl n -option is present, a newline is output following the arguments. -.Pp -If any of the following sequences of characters is encountered during -output, the sequence is not output. Instead, the specified action is -performed: -.Bl -tag -width indent -.It Li \eb -A backspace character is output. -.It Li \ec -Subsequent output is suppressed. This is normally used at the end of the -last argument to suppress the trailing newline that -.Ic echo -would otherwise output. -.It Li \ef -Output a form feed. -.It Li \en -Output a newline character. -.It Li \er -Output a carriage return. -.It Li \et -Output a (horizontal) tab character. -.It Li \ev -Output a vertical tab. -.It Li \e0 Ns Ar digits -Output the character whose value is given by zero to three octal digits. -If there are zero digits, a nul character is output. -.It Li \e\e -Output a backslash. -.El -.Pp -All other backslash sequences elicit undefined behaviour. -.It eval Ar string ... -Concatenate all the arguments with spaces. -Then re-parse and execute the command. -.It exec Op Ar command arg ... -Unless command is omitted, the shell process is replaced with the -specified program (which must be a real program, not a shell builtin or -function). -Any redirections on the -.Ic exec -command are marked as permanent, so that they are not undone when the -.Ic exec -command finishes. -.It exit Op Ar exitstatus -Terminate the shell process. -If -.Ar exitstatus -is given it is used as the exit status of the shell; otherwise the -exit status of the preceding command is used. -.It export Ar name ... -.It export Fl p -The specified names are exported so that they will appear in the -environment of subsequent commands. -The only way to un-export a variable is to unset it. -The shell allows the value of a variable to be set at the -same time it is exported by writing -.Pp -.Dl export name=value -.Pp -With no arguments the export command lists the names of all exported variables. -With the -.Fl p -option specified the output will be formatted suitably for non-interactive use. -.It Xo fc Op Fl e Ar editor -.Op Ar first Op Ar last -.Xc -.It Xo fc Fl l -.Op Fl nr -.Op Ar first Op Ar last -.Xc -.It Xo fc Fl s Op Ar old=new -.Op Ar first -.Xc -The -.Ic fc -builtin lists, or edits and re-executes, commands previously entered -to an interactive shell. -.Bl -tag -width 5n -.It Fl e No editor -Use the editor named by editor to edit the commands. -The editor string is a command name, subject to search via the -.Ev PATH -variable. -The value in the -.Ev FCEDIT -variable is used as a default when -.Fl e -is not specified. -If -.Ev FCEDIT -is null or unset, the value of the -.Ev EDITOR -variable is used. -If -.Ev EDITOR -is null or unset, -.Xr ed 1 -is used as the editor. -.It Fl l No (ell) -List the commands rather than invoking an editor on them. -The commands are written in the sequence indicated by -the first and last operands, as affected by -.Fl r , -with each command preceded by the command number. -.It Fl n -Suppress command numbers when listing with -l. -.It Fl r -Reverse the order of the commands listed (with -.Fl l ) -or edited (with neither -.Fl l -nor -.Fl s ) . -.It Fl s -Re-execute the command without invoking an editor. -.It first -.It last -Select the commands to list or edit. -The number of previous commands that -can be accessed are determined by the value of the -.Ev HISTSIZE -variable. -The value of first or last or both are one of the following: -.Bl -tag -width 5n -.It [+]number -A positive number representing a command number; command numbers can be -displayed with the -.Fl l -option. -.It Fl number -A negative decimal number representing the command that was executed -number of commands previously. -For example, \-1 is the immediately previous command. -.El -.It string -A string indicating the most recently entered command that begins with -that string. -If the old=new operand is not also specified with -.Fl s , -the string form of the first operand cannot contain an embedded equal sign. -.El -.Pp -The following environment variables affect the execution of fc: -.Bl -tag -width HISTSIZE -.It Ev FCEDIT -Name of the editor to use. -.It Ev HISTSIZE -The number of previous commands that are accessible. -.El -.It fg Op Ar job -Move the specified job or the current job to the foreground. -.It getopts Ar optstring var -The -.Tn POSIX -.Ic getopts -command, not to be confused with the -.Em Bell Labs --derived -.Xr getopt 1 . -.Pp -The first argument should be a series of letters, each of which may be -optionally followed by a colon to indicate that the option requires an -argument. -The variable specified is set to the parsed option. -.Pp -The -.Ic getopts -command deprecates the older -.Xr getopt 1 -utility due to its handling of arguments containing whitespace. -.Pp -The -.Ic getopts -builtin may be used to obtain options and their arguments -from a list of parameters. -When invoked, -.Ic getopts -places the value of the next option from the option string in the list in -the shell variable specified by -.Va var -and its index in the shell variable -.Ev OPTIND . -When the shell is invoked, -.Ev OPTIND -is initialized to 1. -For each option that requires an argument, the -.Ic getopts -builtin will place it in the shell variable -.Ev OPTARG . -If an option is not allowed for in the -.Va optstring , -then -.Ev OPTARG -will be unset. -.Pp -.Va optstring -is a string of recognized option letters (see -.Xr getopt 3 ) . -If a letter is followed by a colon, the option is expected to have an -argument which may or may not be separated from it by white space. -If an option character is not found where expected, -.Ic getopts -will set the variable -.Va var -to a -.Dq \&? ; -.Ic getopts -will then unset -.Ev OPTARG -and write output to standard error. -By specifying a colon as the first character of -.Va optstring -all errors will be ignored. -.Pp -After the last option -.Ic getopts -will return a non-zero value and set -.Va var -to -.Dq \&? . -.Pp -The following code fragment shows how one might process the arguments -for a command that can take the options -.Op a -and -.Op b , -and the option -.Op c , -which requires an argument. -.Pp -.Bd -literal -offset indent -while getopts abc: f -do - case $f in - a | b) flag=$f;; - c) carg=$OPTARG;; - \\?) echo $USAGE; exit 1;; - esac -done -shift `expr $OPTIND - 1` -.Ed -.Pp -This code will accept any of the following as equivalent: -.Pp -.Bd -literal -offset indent -cmd \-acarg file file -cmd \-a \-c arg file file -cmd \-carg -a file file -cmd \-a \-carg \-\- file file -.Ed -.It hash Fl rv Ar command ... -The shell maintains a hash table which remembers the -locations of commands. -With no arguments whatsoever, -the -.Ic hash -command prints out the contents of this table. -Entries which have not been looked at since the last -.Ic cd -command are marked with an asterisk; it is possible for these entries -to be invalid. -.Pp -With arguments, the -.Ic hash -command removes the specified commands from the hash table (unless -they are functions) and then locates them. -With the -.Fl v -option, hash prints the locations of the commands as it finds them. -The -.Fl r -option causes the hash command to delete all the entries in the hash table -except for functions. -.It pwd Op Fl LP -builtin command remembers what the current directory -is rather than recomputing it each time. -This makes it faster. -However, if the current directory is renamed, the builtin version of -.Ic pwd -will continue to print the old name for the directory. -The -.Fl P -option causes the physical value of the current working directory to be shown, -that is, all symbolic links are resolved to their respective values. The -.Fl L -option turns off the effect of any preceding -.Fl P -options. -.It Xo read Op Fl p Ar prompt -.Op Fl r -.Ar variable -.Op Ar ... -.Xc -The prompt is printed if the -.Fl p -option is specified and the standard input is a terminal. -Then a line is read from the standard input. -The trailing newline is deleted from the -line and the line is split as described in the section on word splitting -above, and the pieces are assigned to the variables in order. -At least one variable must be specified. -If there are more pieces than variables, the remaining pieces -(along with the characters in -.Ev IFS -that separated them) are assigned to the last variable. -If there are more variables than pieces, -the remaining variables are assigned the null string. -The -.Ic read -builtin will indicate success unless EOF is encountered on input, in -which case failure is returned. -.Pp -By default, unless the -.Fl r -option is specified, the backslash -.Dq \e -acts as an escape character, causing the following character to be treated -literally. -If a backslash is followed by a newline, the backslash and the -newline will be deleted. -.It readonly Ar name ... -.It readonly Fl p -The specified names are marked as read only, so that they cannot be -subsequently modified or unset. -The shell allows the value of a variable -to be set at the same time it is marked read only by writing -.Pp -.Dl readonly name=value -.Pp -With no arguments the readonly command lists the names of all read only -variables. -With the -.Fl p -option specified the output will be formatted suitably for non-interactive use. -.Pp -.It Xo printf Ar format -.Op Ar arguments ... -.Xc -.Ic printf -formats and prints its arguments, after the first, under control -of the -.Ar format . -The -.Ar format -is a character string which contains three types of objects: plain characters, -which are simply copied to standard output, character escape sequences which -are converted and copied to the standard output, and format specifications, -each of which causes printing of the next successive -.Ar argument . -.Pp -The -.Ar arguments -after the first are treated as strings if the corresponding format is -either -.Cm b , -.Cm c -or -.Cm s ; -otherwise it is evaluated as a C constant, with the following extensions: -.Pp -.Bl -bullet -offset indent -compact -.It -A leading plus or minus sign is allowed. -.It -If the leading character is a single or double quote, the value is the -.Tn ASCII -code of the next character. -.El -.Pp -The format string is reused as often as necessary to satisfy the -.Ar arguments . -Any extra format specifications are evaluated with zero or the null -string. -.Pp -Character escape sequences are in backslash notation as defined in -.St -ansiC . -The characters and their meanings are as follows: -.Bl -tag -width Ds -offset indent -.It Cm \ea -Write a \*[Lt]bell\*[Gt] character. -.It Cm \eb -Write a \*[Lt]backspace\*[Gt] character. -.It Cm \ef -Write a \*[Lt]form-feed\*[Gt] character. -.It Cm \en -Write a \*[Lt]new-line\*[Gt] character. -.It Cm \er -Write a \*[Lt]carriage return\*[Gt] character. -.It Cm \et -Write a \*[Lt]tab\*[Gt] character. -.It Cm \ev -Write a \*[Lt]vertical tab\*[Gt] character. -.It Cm \e\e -Write a backslash character. -.It Cm \e Ns Ar num -Write an 8\-bit character whose -.Tn ASCII -value is the 1\-, 2\-, or 3\-digit -octal number -.Ar num . -.El -.Pp -Each format specification is introduced by the percent character -(``%''). -The remainder of the format specification includes, -in the following order: -.Bl -tag -width Ds -.It "Zero or more of the following flags:" -.Bl -tag -width Ds -.It Cm # -A `#' character -specifying that the value should be printed in an ``alternative form''. -For -.Cm b , -.Cm c , -.Cm d , -and -.Cm s -formats, this option has no effect. -For the -.Cm o -format the precision of the number is increased to force the first -character of the output string to a zero. -For the -.Cm x -.Pq Cm X -format, a non-zero result has the string -.Li 0x -.Pq Li 0X -prepended to it. -For -.Cm e , -.Cm E , -.Cm f , -.Cm g , -and -.Cm G -formats, the result will always contain a decimal point, even if no -digits follow the point (normally, a decimal point only appears in the -results of those formats if a digit follows the decimal point). -For -.Cm g -and -.Cm G -formats, trailing zeros are not removed from the result as they -would otherwise be. -.It Cm \&\- -A minus sign `\-' which specifies -.Em left adjustment -of the output in the indicated field; -.It Cm \&+ -A `+' character specifying that there should always be -a sign placed before the number when using signed formats. -.It Sq \&\ \& -A space specifying that a blank should be left before a positive number -for a signed format. -A `+' overrides a space if both are used; -.It Cm \&0 -A zero `0' character indicating that zero-padding should be used -rather than blank-padding. -A `\-' overrides a `0' if both are used; -.El -.It "Field Width:" -An optional digit string specifying a -.Em field width ; -if the output string has fewer characters than the field width it will -be blank-padded on the left (or right, if the left-adjustment indicator -has been given) to make up the field width (note that a leading zero -is a flag, but an embedded zero is part of a field width); -.It Precision : -An optional period, -.Sq Cm \&.\& , -followed by an optional digit string giving a -.Em precision -which specifies the number of digits to appear after the decimal point, -for -.Cm e -and -.Cm f -formats, or the maximum number of bytes to be printed -from a string -.Sm off -.Pf ( Cm b -.Sm on -and -.Cm s -formats); if the digit string is missing, the precision is treated -as zero; -.It Format : -A character which indicates the type of format to use (one of -.Cm diouxXfwEgGbcs ) . -.El -.Pp -A field width or precision may be -.Sq Cm \&* -instead of a digit string. -In this case an -.Ar argument -supplies the field width or precision. -.Pp -The format characters and their meanings are: -.Bl -tag -width Fl -.It Cm diouXx -The -.Ar argument -is printed as a signed decimal (d or i), unsigned octal, unsigned decimal, -or unsigned hexadecimal (X or x), respectively. -.It Cm f -The -.Ar argument -is printed in the style -.Sm off -.Pf [\-]ddd Cm \&. No ddd -.Sm on -where the number of d's -after the decimal point is equal to the precision specification for -the argument. -If the precision is missing, 6 digits are given; if the precision -is explicitly 0, no digits and no decimal point are printed. -.It Cm eE -The -.Ar argument -is printed in the style -.Sm off -.Pf [\-]d Cm \&. No ddd Cm e No \*(Pmdd -.Sm on -where there -is one digit before the decimal point and the number after is equal to -the precision specification for the argument; when the precision is -missing, 6 digits are produced. -An upper-case E is used for an `E' format. -.It Cm gG -The -.Ar argument -is printed in style -.Cm f -or in style -.Cm e -.Pq Cm E -whichever gives full precision in minimum space. -.It Cm b -Characters from the string -.Ar argument -are printed with backslash-escape sequences expanded. -.br -The following additional backslash-escape sequences are supported: -.Bl -tag -width Ds -.It Cm \ec -Causes -.Nm -to ignore any remaining characters in the string operand containing it, -any remaining string operands, and any additional characters in -the format operand. -.It Cm \e0 Ns Ar num -Write an 8\-bit character whose -.Tn ASCII -value is the 1\-, 2\-, or 3\-digit -octal number -.Ar num . -.El -.It Cm c -The first character of -.Ar argument -is printed. -.It Cm s -Characters from the string -.Ar argument -are printed until the end is reached or until the number of bytes -indicated by the precision specification is reached; if the -precision is omitted, all characters in the string are printed. -.It Cm \&% -Print a `%'; no argument is used. -.El -.Pp -In no case does a non-existent or small field width cause truncation of -a field; padding takes place only if the specified field width exceeds -the actual width. -.It Xo set -.Oo { -.Fl options | Cm +options | Cm -- } -.Oc Ar arg ... -.Xc -The -.Ic set -command performs three different functions. -.Pp -With no arguments, it lists the values of all shell variables. -.Pp -If options are given, it sets the specified option -flags, or clears them as described in the section called -.Sx Argument List Processing . -As a special case, if the option is -o or +o and no argument is -supplied, the shell prints the settings of all its options. If the -option is -o, the settings are printed in a human-readable format; if -the option is +o, the settings are printed in a format suitable for -reinput to the shell to affect the same option settings. -.Pp -The third use of the set command is to set the values of the shell's -positional parameters to the specified args. -To change the positional -parameters without changing any options, use -.Dq -- -as the first argument to set. -If no args are present, the set command -will clear all the positional parameters (equivalent to executing -.Dq shift $# . ) -.It shift Op Ar n -Shift the positional parameters n times. -A -.Ic shift -sets the value of -.Va $1 -to the value of -.Va $2 , -the value of -.Va $2 -to the value of -.Va $3 , -and so on, decreasing -the value of -.Va $# -by one. -If n is greater than the number of positional parameters, -.Ic shift -will issue an error message, and exit with return status 2. -.It test Ar expression -.It \&[ Ar expression Cm \&] -The -.Ic test -utility evaluates the expression and, if it evaluates -to true, returns a zero (true) exit status; otherwise -it returns 1 (false). -If there is no expression, test also -returns 1 (false). -.Pp -All operators and flags are separate arguments to the -.Ic test -utility. -.Pp -The following primaries are used to construct expression: -.Bl -tag -width Ar -.It Fl b Ar file -True if -.Ar file -exists and is a block special -file. -.It Fl c Ar file -True if -.Ar file -exists and is a character -special file. -.It Fl d Ar file -True if -.Ar file -exists and is a directory. -.It Fl e Ar file -True if -.Ar file -exists (regardless of type). -.It Fl f Ar file -True if -.Ar file -exists and is a regular file. -.It Fl g Ar file -True if -.Ar file -exists and its set group ID flag -is set. -.It Fl h Ar file -True if -.Ar file -exists and is a symbolic link. -.It Fl k Ar file -True if -.Ar file -exists and its sticky bit is set. -.It Fl n Ar string -True if the length of -.Ar string -is nonzero. -.It Fl p Ar file -True if -.Ar file -is a named pipe -.Po Tn FIFO Pc . -.It Fl r Ar file -True if -.Ar file -exists and is readable. -.It Fl s Ar file -True if -.Ar file -exists and has a size greater -than zero. -.It Fl t Ar file_descriptor -True if the file whose file descriptor number -is -.Ar file_descriptor -is open and is associated with a terminal. -.It Fl u Ar file -True if -.Ar file -exists and its set user ID flag -is set. -.It Fl w Ar file -True if -.Ar file -exists and is writable. -True -indicates only that the write flag is on. -The file is not writable on a read-only file -system even if this test indicates true. -.It Fl x Ar file -True if -.Ar file -exists and is executable. -True -indicates only that the execute flag is on. -If -.Ar file -is a directory, true indicates that -.Ar file -can be searched. -.It Fl z Ar string -True if the length of -.Ar string -is zero. -.It Fl L Ar file -True if -.Ar file -exists and is a symbolic link. -This operator is retained for compatibility with previous versions of -this program. -Do not rely on its existence; use -.Fl h -instead. -.It Fl O Ar file -True if -.Ar file -exists and its owner matches the effective user id of this process. -.It Fl G Ar file -True if -.Ar file -exists and its group matches the effective group id of this process. -.It Fl S Ar file -True if -.Ar file -exists and is a socket. -.It Ar file1 Fl nt Ar file2 -True if -.Ar file1 -and -.Ar file2 -exist and -.Ar file1 -is newer than -.Ar file2 . -.It Ar file1 Fl ot Ar file2 -True if -.Ar file1 -and -.Ar file2 -exist and -.Ar file1 -is older than -.Ar file2 . -.It Ar file1 Fl ef Ar file2 -True if -.Ar file1 -and -.Ar file2 -exist and refer to the same file. -.It Ar string -True if -.Ar string -is not the null -string. -.It Ar \&s\&1 Cm \&= Ar \&s\&2 -True if the strings -.Ar \&s\&1 -and -.Ar \&s\&2 -are identical. -.It Ar \&s\&1 Cm \&!= Ar \&s\&2 -True if the strings -.Ar \&s\&1 -and -.Ar \&s\&2 -are not identical. -.It Ar \&s\&1 Cm \&\*[Lt] Ar \&s\&2 -True if string -.Ar \&s\&1 -comes before -.Ar \&s\&2 -based on the ASCII value of their characters. -.It Ar \&s\&1 Cm \&\*[Gt] Ar \&s\&2 -True if string -.Ar \&s\&1 -comes after -.Ar \&s\&2 -based on the ASCII value of their characters. -.It Ar \&n\&1 Fl \&eq Ar \&n\&2 -True if the integers -.Ar \&n\&1 -and -.Ar \&n\&2 -are algebraically -equal. -.It Ar \&n\&1 Fl \&ne Ar \&n\&2 -True if the integers -.Ar \&n\&1 -and -.Ar \&n\&2 -are not -algebraically equal. -.It Ar \&n\&1 Fl \> Ar \&n\&2 -True if the integer -.Ar \&n\&1 -is algebraically -greater than the integer -.Ar \&n\&2 . -.It Ar \&n\&1 Fl \&ge Ar \&n\&2 -True if the integer -.Ar \&n\&1 -is algebraically -greater than or equal to the integer -.Ar \&n\&2 . -.It Ar \&n\&1 Fl \< Ar \&n\&2 -True if the integer -.Ar \&n\&1 -is algebraically less -than the integer -.Ar \&n\&2 . -.It Ar \&n\&1 Fl \&le Ar \&n\&2 -True if the integer -.Ar \&n\&1 -is algebraically less -than or equal to the integer -.Ar \&n\&2 . -.El -.Pp -These primaries can be combined with the following operators: -.Bl -tag -width Ar -.It Cm \&! Ar expression -True if -.Ar expression -is false. -.It Ar expression1 Fl a Ar expression2 -True if both -.Ar expression1 -and -.Ar expression2 -are true. -.It Ar expression1 Fl o Ar expression2 -True if either -.Ar expression1 -or -.Ar expression2 -are true. -.It Cm \&( Ns Ar expression Ns Cm \&) -True if expression is true. -.El -.Pp -The -.Fl a -operator has higher precedence than the -.Fl o -operator. -.It times -Print the accumulated user and system times for the shell and for processes -run from the shell. The return status is 0. -.It Xo trap -.Op Ar action Ar signal ... -.Xc -Cause the shell to parse and execute action when any of the specified -signals are received. -The signals are specified by signal number or as the name of the signal. -If -.Ar signal -is -.Li 0 -or -.Li EXIT , -the action is executed when the shell exits. -.Ar action -may be empty -.Li ( "''" ) , -which causes the specified signals to be ignored. -With -.Ar action -omitted or set to `-' the specified signals are set to their default action. -When the shell forks off a subshell, it resets trapped (but not ignored) -signals to the default action. -The -.Ic trap -command has no effect on signals that were -ignored on entry to the shell. -.Ic trap -without any arguments cause it to write a list of signals and their -associated action to the standard output in a format that is suitable -as an input to the shell that achieves the same trapping results. -.Pp -Examples: -.Pp -.Dl trap -.Pp -List trapped signals and their corresponding action -.Pp -.Dl trap '' INT QUIT tstp 30 -.Pp -Ignore signals INT QUIT TSTP USR1 -.Pp -.Dl trap date INT -.Pp -Print date upon receiving signal INT -.It type Op Ar name ... -Interpret each name as a command and print the resolution of the command -search. -Possible resolutions are: -shell keyword, alias, shell builtin, -command, tracked alias and not found. -For aliases the alias expansion is -printed; for commands and tracked aliases the complete pathname of the -command is printed. -.It ulimit Xo -.Op Fl H \*(Ba Fl S -.Op Fl a \*(Ba Fl tfdscmlpnv Op Ar value -.Xc -Inquire about or set the hard or soft limits on processes or set new -limits. -The choice between hard limit (which no process is allowed to -violate, and which may not be raised once it has been lowered) and soft -limit (which causes processes to be signaled but not necessarily killed, -and which may be raised) is made with these flags: -.Bl -tag -width Fl -.It Fl H -set or inquire about hard limits -.It Fl S -set or inquire about soft limits. -If neither -.Fl H -nor -.Fl S -is specified, the soft limit is displayed or both limits are set. -If both are specified, the last one wins. -.El -.Pp -The limit to be interrogated or set, then, is chosen by specifying -any one of these flags: -.Bl -tag -width Fl -.It Fl a -show all the current limits -.It Fl t -show or set the limit on CPU time (in seconds) -.It Fl f -show or set the limit on the largest file that can be created -(in 512-byte blocks) -.It Fl d -show or set the limit on the data segment size of a process (in kilobytes) -.It Fl s -show or set the limit on the stack size of a process (in kilobytes) -.It Fl c -show or set the limit on the largest core dump size that can be produced -(in 512-byte blocks) -.It Fl m -show or set the limit on the total physical memory that can be -in use by a process (in kilobytes) -.It Fl l -show or set the limit on how much memory a process can lock with -.Xr mlock 2 -(in kilobytes) -.It Fl p -show or set the limit on the number of processes this user can -have at one time -.It Fl n -show or set the limit on the number files a process can have open at once -.It Fl v -show or set the limit on the total virtual memory that can be -in use by a process (in kilobytes) -.It Fl r -show or set the limit on the real-time scheduling priority of a process -.El -.Pp -If none of these is specified, it is the limit on file size that is shown -or set. -If value is specified, the limit is set to that number; otherwise -the current limit is displayed. -.Pp -Limits of an arbitrary process can be displayed or set using the -.Xr sysctl 8 -utility. -.Pp -.It umask Op Ar mask -Set the value of umask (see -.Xr umask 2 ) -to the specified octal value. -If the argument is omitted, the umask value is printed. -.It unalias Xo -.Op Fl a -.Op Ar name -.Xc -If -.Ar name -is specified, the shell removes that alias. -If -.Fl a -is specified, all aliases are removed. -.It unset Xo -.Op Fl fv -.Ar name ... -.Xc -The specified variables and functions are unset and unexported. -If -.Fl f -or -.Fl v -is specified, the corresponding function or variable is unset, respectively. -If a given name corresponds to both a variable and a function, and no -options are given, only the variable is unset. -.It wait Op Ar job -Wait for the specified job to complete and return the exit status of the -last process in the job. -If the argument is omitted, wait for all jobs to -complete and return an exit status of zero. -.El -.Ss Command Line Editing -When -.Nm -is being used interactively from a terminal, the current command -and the command history (see -.Ic fc -in -.Sx Builtins ) -can be edited using vi-mode command-line editing. -This mode uses commands, described below, -similar to a subset of those described in the vi man page. -The command -.Ql set -o vi -enables vi-mode editing and places sh into vi insert mode. -With vi-mode -enabled, sh can be switched between insert mode and command mode. -It is similar to vi: typing -.Aq ESC -enters vi command mode. -Hitting -.Aq return -while in command mode will pass the line to the shell. -.Sh EXIT STATUS -Errors that are detected by the shell, such as a syntax error, will cause the -shell to exit with a non-zero exit status. -If the shell is not an -interactive shell, the execution of the shell file will be aborted. -Otherwise -the shell will return the exit status of the last command executed, or -if the exit builtin is used with a numeric argument, it will return the -argument. -.Sh ENVIRONMENT -.Bl -tag -width MAILCHECK -.It Ev HOME -Set automatically by -.Xr login 1 -from the user's login directory in the password file -.Pq Xr passwd 4 . -This environment variable also functions as the default argument for the -cd builtin. -.It Ev PATH -The default search path for executables. -See the above section -.Sx Path Search . -.It Ev CDPATH -The search path used with the cd builtin. -.It Ev MAIL -The name of a mail file, that will be checked for the arrival of new mail. -Overridden by -.Ev MAILPATH . -.It Ev MAILCHECK -The frequency in seconds that the shell checks for the arrival of mail -in the files specified by the -.Ev MAILPATH -or the -.Ev MAIL -file. -If set to 0, the check will occur at each prompt. -.It Ev MAILPATH -A colon -.Dq \&: -separated list of file names, for the shell to check for incoming mail. -This environment setting overrides the -.Ev MAIL -setting. -There is a maximum of 10 mailboxes that can be monitored at once. -.It Ev PS1 -The primary prompt string, which defaults to -.Dq $\ , -unless you are the superuser, in which case it defaults to -.Dq #\ . -.It Ev PS2 -The secondary prompt string, which defaults to -.Dq \*[Gt]\ . -.It Ev PS4 -Output before each line when execution trace (set -x) is enabled, -defaults to -.Dq +\ . -.It Ev RPS1 -The primary right prompt string. -.It Ev RPS2 -The secondary right prompt string. -.It Ev IFS -Input Field Separators. -This is normally set to -.Aq space , -.Aq tab , -and -.Aq newline . -See the -.Sx White Space Splitting -section for more details. -.It Ev TERM -The default terminal setting for the shell. -This is inherited by -children of the shell, and is used in the history editing modes. -.It Ev HISTSIZE -The number of lines in the history buffer for the shell. -.It Ev PWD -The logical value of the current working directory. This is set by the -.Ic cd -command. -.It Ev OLDPWD -The previous logical value of the current working directory. This is set by -the -.Ic cd -command. -.It Ev PPID -The process ID of the parent process of the shell. -.El -.Sh FILES -.Bl -item -width HOMEprofilexxxx -.It -.Pa $HOME/.profile -.It -.Pa /etc/profile -.El -.Sh SEE ALSO -.Xr csh 1 , -.Xr echo 1 , -.Xr getopt 1 , -.Xr ksh 1 , -.Xr login 1 , -.Xr printf 1 , -.Xr test 1 , -.Xr getopt 3 , -.Xr passwd 5 , -.\" .Xr profile 4 , -.Xr environ 7 , -.Xr sysctl 8 -.Sh HISTORY -.Nm -is a POSIX-compliant implementation of /bin/sh that aims to be as small as -possible. -.Nm -is a direct descendant of the NetBSD version of ash (the Almquist SHell), -ported to Linux in early 1997. -It was renamed to -.Nm -in 2002. -.Sh BUGS -Setuid shell scripts should be avoided at all costs, as they are a -significant security risk. -.Pp -PS1, PS2, and PS4 should be subject to parameter expansion before -being displayed. -- cgit 1.4.1