From a3e8a3d6c00072a14a681d3bd93908d452a91ab8 Mon Sep 17 00:00:00 2001 From: June McEnroe Date: Thu, 8 Nov 2018 21:40:50 -0500 Subject: Convert zlib.h comments to mdoc --- deflate.3 | 370 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100644 deflate.3 (limited to 'deflate.3') diff --git a/deflate.3 b/deflate.3 new file mode 100644 index 00000000..be182d96 --- /dev/null +++ b/deflate.3 @@ -0,0 +1,370 @@ +.Dd January 15, 2017 +.Dt DEFLATE 3 +.Os +. +.Sh NAME +.Nm deflate +.Nd deflate compression +. +.Sh LIBRARY +.Lb libz +. +.Sh SYNOPSIS +.In zlib.h +.Ft int +.Fn deflate "z_streamp strm" "int flush" +. +.Sh DESCRIPTION +.Fn deflate +compresses as much data as possible, +and stops when the input buffer becomes empty +or the output buffer becomes full. +It may introduce some output latency +(reading input without producing any output) +except when forced the flush. +. +.Pp +The detailed semantics are as follows. +.Fn deflate +performs one or both of the following actions: +. +.Bl -dash +.It +Compress more input starting at +.Fa next_in +and update +.Fa next_in +and +.Fa avail_in +accordingly. +If not all input can be processed +(because there is not enough room in the output buffer), +.Fa next_in +and +.Fa avail_in +are updated +and processing will resume at this point +for the next call of +.Fn deflate . +. +.It +Generate more output starting at +.Fa next_out +and update +.Fa next_out +and +.Fa avail_out +accordingly. +This action is forced if the parameter +.Fa flush +is non-zero. +Forcing flush frequently degrades the compression ratio, +so this parameter should be set only when necessary. +Some output may be provided even if +.Fa flush +is zero. +.El +. +.Pp +Before the call of +.Fn deflate , +the application should ensure that +at least one of the actions is possible, +by providing more input +and/or consuming more output, +and updating +.Fa avail_in +or +.Fa avail_out +accordingly; +.Fa avail_out +should never be zero before the call. +The application can consume the compressed output +when it wants, +for example when the output buffer is full +.Po +.Fa avail_out +== 0 +.Pc , +or after each call of +.Fn deflate . +If +.Fn deflate +returns +.Dv Z_OK +and with zero +.Fa avail_out , +it must be called again after making room in the output buffer +because there might be more output pending. +See +.Xr deflatePending 3 , +which can be used if desired to determine +whether or not there is more output in that case. +. +.Pp +Normally the parameter +.Fa flush +is set to +.Dv Z_NO_FLUSH , +which allows +.Fn deflate +to decide how much data to accumulate before producing output, +in order to maximize compression. +. +.Pp +If the parameter +.Fa flush +is set to +.Dv Z_SYNC_FLUSH , +all pending output is flushed to the output buffer +and the output is aligned on a byte boundary, +so that the decompressor can get all input data available so far. +.Po +In particular +.Fa avail_in +is zero after the call if enough output space +has been provided before the call. +.Pc \& +Flushing may degrade compression for some compression algorithms +and so it should be used only when necessary. +This completes the current deflate block +and follows it with an empty stored block +that is three bits plus filler bits to the next byte, +followed by four bytes +(00 00 ff ff). +. +.Pp +If +.Fa flush +is set to +.Dv Z_PARTIAL_FLUSH , +all pending output is flushed to the output buffer, +but the output is not aligned to a byte boundary. +All of the input data so far will be available to the decompressor, +as for +.Dv Z_SYNC_FLUSH . +This completes the current deflate block +and follows it with an empty fixed codes block +that is 10 bits long. +This assures that enough bytes are output +in order for the decompressor to finish the block +before the empty fixed codes block. +. +.Pp +If +.Fa flush +is set to +.Dv Z_BLOCK , +a deflate block is completed and emitted, +as for +.Dv Z_SYNC_FLUSH , +but the output is not aligned on a byte boundary, +and up to seven bits of the current block +are held to be written as the next byte +after the next deflate block is completed. +In this case, +the decompressor may not be provided enough bits +at this point in order to complete decompression +of the data provided so far to the compressor. +It may need to wait for the next block to be emitted. +This is for advanced applications +that need to control the emission of deflate blocks. +. +.Pp +If +.Fa flush +is set to +.Dv Z_FULL_FLUSH , +all output is flushed as with +.Dv Z_SYNC_FLUSH , +and the compression state is reset +so that decompression can restart from this point +if previous compressed data has been damaged +or if random access is desired. +Using +.Dv Z_FULL_FLUSH +too often can seriously degrade compression. +. +.Pp +If +.Fn deflate +returns with +.Fa avail_out +== 0, +this function must be called again +with the same value of the +.Fa flush +parameter +and more output space +.Po +updated +.Fa avail_out +.Pc , +until the flush is complete +.Po +.Fn deflate +returns with non-zero +.Fa avail_out +.Pc . +In the case of a +.Dv Z_FULL_FLUSH +or +.Dv Z_SYNC_FLUSH , +make sure that +.Fa avail_out +is greater than six +to avoid repeated flush markers +due to +.Fa avail_out +== 0 +on return. +. +.Pp +If the parameter +.Fa flush +is set to +.Dv Z_FINISH , +pending input is processed, +pending output is flushed and +.Fn deflate +returns with +.Dv Z_STREAM_END +if there was enough output space. +If +.Fn deflate +returns with +.Dv Z_OK +or +.Dv Z_BUF_ERROR , +this function must be called again with +.Dv Z_FINISH +and more output space +.Pq updated Fa avail_out +but no more input data, +until it returns with +.Dv Z_STREAM_END +or an error. +After +.Fn deflate +has returned +.Dv Z_STREAM_END , +the only possible operations on the stream are +.Xr deflateReset 3 +or +.Xr deflateEnd 3 . +. +.Pp +.Dv Z_FINISH +can be used in the first +.Fn deflate +call after +.Xr deflateInit 3 +if all the compression is to be done in a single step. +In order to complete in one call, +.Fa avail_out +must be at least the value returned by +.Xr deflateBound 3 . +Then +.Fn deflate +is guaranteed to return +.Dv Z_STREAM_END . +If not enough output space is provided, +.Fn deflate +will not return +.Dv Z_STREAM_END , +and it must be called again as described above. +. +.Pp +.Fn deflate +sets +.Fa strm->adler +to the Adler-32 checksum +of all input read so far +.Po +that is, +.Fa total_in +bytes +.Pc . +If a gzip stream is being generated, +then +.Fa strm->adler +will be the CRC-32 checksum of the input read so far. +See +.Xr deflateInit2 3 . +. +.Pp +.Fn deflate +may update +.Fa strm->data_type +if it can make a good guess +about the input data type +.Po +.Dv Z_BINARY +or +.Dv Z_TEXT +.Pc . +If in doubt, +the date is considered binary. +This field is only for information purposes +and does not affect the compression algorithm in any manner. +. +.Sh RETURN VALUES +.Fn deflate +returns +.Dv Z_OK +if some progress has been made +(more input processed or more output produced), +.Dv Z_STREAM_END +if all input has been consumed +and all output has been produced +.Po +only when +.Fa flush +is set to +.Dv Z_FINISH +.Pc , +.Dv Z_STREAM_ERROR +if the stream state was inconsistent +.Po +for example if +.Fa next_in +or +.Fa next_out +was +.Dv Z_NULL +or the state was inadvertently written over +by the application +.Pc , +or +.Dv Z_BUF_ERROR +if no progress is possible +.Po +for example +.Fa avail_in +or +.Fa avail_out +was zero +.Pc . +Note that +.Dv Z_BUF_ERROR +is not fatal, +and +.Fn deflate +can be called again with more input and more output space +to continue compressing. +. +.Sh SEE ALSO +.Xr deflateEnd 3 , +.Xr deflateInit 3 , +.Xr deflatePending 3 , +.Xr inflate 3 +. +.Sh HISTORY +This manual page was converted from +.In zlib.h +to mdoc format by +.An June McEnroe Aq Mt june@causal.agency . +. +.Sh AUTHORS +.An Jean-loup Gailly Aq Mt jloup@gzip.org +.An Mark Adler Aq Mt madler@alumni.caltech.edu -- cgit 1.4.1