| Commit message (Collapse) | Author |
|---|
|
Currently growstackto will repeatedly call growstackblock until
the requisite size is obtained. This is wasteful. This patch
changes growstackblock to take a minimum size instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The variable localvar_stop is set iff vlocal is true. gcc doesn't
get this so we get a spurious warning.
This patch fixes this by always calling pushlocalvars with vlocal
and making it only actually do the push if vlocal is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently various paths will reprocess data when performing word
expansion. For example, expari will skip backwards looking for
the start of the arithmetic expansion, while evalvar will skip
unexpanded words manually.
This is cumbersome and error-prone. This patch fixes this by
making word expansions proceed in a linear fashion. This means
changing argstr and the various expansion functions such as expari
and subevalvar to return the next character to be expanded.
This is inspired by similar code from FreeBSD. However, we take
things one step further and completely remove the manual word
skipping in evalvar. This is accomplished by introducing a new
EXP_DISCARD flag that tells argstr to only parse and not produce
any actual expansions.
Incidentally, argstr will now always NUL-terminate the expansion
unless the EXP_WORD flag is set. This is because all but one
caller of argstr wants the result to be NUL-termianted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we are trimming an unset variable in evalvar, any embedded
command substitution that should have been skipped are not. This
can cause them to be evaluated later should there be other command
substitutions in the same input word.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function arguments syntax and quotes are both derived from
the expansion flags. As syntax is only used by memtodest we do
not need to maintain it outside of the function at all.
The only place that uses something other than BASESYNTAX or DQSYNTAX
is exptilde. However in that case DQSYNTAX has exactly the same
effect as SQSYNTAX.
This patch merges these two arguments into a single flags. The
macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order
to keep the namespace separate.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently if HOME is set to empty tilde expansion will fail, i.e.,
it will remain as a literal tilde. This patch changes it to
return the empty string as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
config.h contains settings for the cross compiler (most importantly
32/64bit versions of functions), so don't include it when calling the
native compiler to build the helpers.
Otherwise we get build errors like:
/usr/bin/gcc -include ../config.h -DBSD=1 -DSHELL -DIFS_BROKEN -g -O2 -Wall -o mkinit mkinit.c
In file included from /usr/include/sys/stat.h:107,
from /usr/include/fcntl.h:38,
from mkinit.c:50:
/usr/include/bits/stat.h:117: error: redefinition of ‘struct stat’
In file included from /usr/include/fcntl.h:38,
from mkinit.c:50:
/usr/include/sys/stat.h:504: error: redefinition of ‘stat’
/usr/include/sys/stat.h:455: note: previous definition of ‘stat’ was here
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[baruch: apply to Makefile.am; update Peter's email address]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the test_access code from NetBSD when faccess is
unavailable. The code has been modified so that root can always
read/write any file.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds basic vfork support for the case of a simple command.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch replaces listsetvar with mklocal/setvareq. As we now
determine special built-in status prior to variable assignment, we
no longer have to do a second pass listsetvar. Instead we will
call setvareq directly instead of mklocal when necessary.
In order to do this mklocal can now take a flag in order to mark
a variable for export.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously, dash would continue to perform variable expansions
even if a redirection error occured. This patch changes it so
that it fails immediately.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds assignment built-in support that used to exist
in dash prior to 0.3.8-15. This is because it will soon be part
of POSIX, and the semantics are now much better defined.
Recognition is done at execution time, so even "command -- export"
or "var=export; command $var" should work.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As regular (including special) built-ins can never be overridden,
we should never remove them from the hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch changes the parsing of pathopt. First of all only
%builtin and %func (with arbitrary suffixes) will be recognised.
Any other pathopt will be treated as a normal directory.
Furthermore, pathopt can now be specified before the directory,
rather than after it. In fact, a future version may remove support
for pathopt suffixes.
Wherever the pathopt is placed, an optional % may be placed after
it to terminate the pathopt.
This is so that it is less likely that a genuine directory containing
a % sign is parsed as a pathopt.
Users of padvance outside of exec.c have also been modified:
1) cd(1) will always treat % characters as part of the path.
2) chkmail will continue to accept arbitrary pathopt.
3) find_dot_file will ignore the %builtin pathopt instead of trying
to do a stat in the accompanying directory (which is usually the
current directory).
The patch also removes the clearcmdentry optimisation where we
attempt to only partially flush the table where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch marks the following built-ins as regular, meaning that
they cannot be overriden using PATH search:
hash
pwd
type
ulimit
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many callers of padvance immediately free the allocated string
so this patch moves the stalloc call to the caller. Instead of
returning the allocated string, padvance now returns the length
to allocate (this may be longer than the actual string length,
even including the NUL). For the case where we would previously
return NULL, we now return -1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the growstackto helper which repeatedly calls
growstackblock until the requested size is reached.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some uses of fmtstr, particularly the ones without a format string,
can be replaced with stpcpy or stpncpy. This patch does that so
we don't have to introduce unnecessary format strings in order to
silence compiler warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function fmtstr is meant to return the actual length of output
produced, rather than the untruncated length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch forces the IFS variable to always be set to its default
value, regardless of the environment.
It also removes the long unused IFS_BROKEN code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch changes the parsing of here-documents within command
substitution, both old style and new style. In particular, the
original here-document list is saved upon the beginning of parsing
command substitution and restored when exiting.
This means that here-documents outside of command substitution
can no longer be filled by text within it and vice-versa.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The gotsigchld flag is always cleared in dowait but not all callers
of dowait will wait for everything. In particular, when jp is set
we only wait until the set job isn't running anymore.
This patch fixes this by only clearing gotsigchld if jp is unset.
It also changes the waitcmd to actually set jp which corresponds
to the behaviour of bash/ksh93/mksh.
The only other caller of dowait that doesn't wait for everything
is the jobless reaper. This is in fact redundant now that we wait
after every simple command. This patch removes it.
Finally as every caller of dowait needs to wait until either the
given job is not running, or until all terminated jobs have been
processed, this patch moves the loop into dowait itself.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously reset was called after exitshell. This was changed
so that it was called before exitshell because certain state needed
to be reset in order for the EXIT trap to work.
However, this caused issues because certain other states (such
as local variables) should not be reset. This patch fixes this
by creating a new function exitreset that is called prior to
exitshell and moving reset back to its original location.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently exitcmd sets exitstatus and then savestatus if the latter
was previously set. In fact, as exitcmd always raises an exception
and will either end up in the setjmp call in main() or exitshell(),
where exitstatus is always replaced by savestatus if set, we only
need to set savestatus.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently when shellexec fails on most errors the shell will exit
with exit status 2. This patch changes it to 126 in order to avoid
ambiguities with the exit status from a successful exec.
The errors that result in 127 has also been expanded to include
ENOTDIR, ENAMETOOLONG and ELOOP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
|
|
With the introduction of synstack->syntax, a number of references
to the syntax variable was missed during the conversion. This
causes backslash newlines to be incorrectly removed in single
quote context.
This patch also combines these calls into a new helper function
pgetc_top.
Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...")
Reported-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
|
|
Because of the nature of SIGCHLD, the process may have already been
waited on and therefore we must be prepared for the case that wait
may block. So ensure that it doesn't by using WNOHANG.
Furthermore, multiple jobs may have exited when gotsigchld is set.
Therefore we need to wait until there are no zombies left.
Lastly, waitforjob needs to be called with interrupts off and
the original patch broke that.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
|
|
Dirk Fieldhouse <fieldhouse@gmx.net> wrote:
>
> In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open
> Group Technical Standard Base Specifications, Issue 7")
> <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>,
> we read under '2.9.1 Simple Commands'
>
> "Variable assignments shall be performed as follows:
> ...
> - If the command name is a standard utility implemented as a function
> (see XBD Utility), the effect of variable assignments shall be as if the
> utility was not implemented as a function.
> ...
> - If the command name is a function that is not a standard utility
> implemented as a function, variable assignments shall affect the current
> execution environment during the execution of the function. It is
> unspecified:
>
> * Whether or not the variable assignments persist after the
> completion of the function
>
> * Whether or not the variables gain the export attribute during
> the execution of the function
>
> * Whether or not export attributes gained as a result of the
> variable assignments persist after the completion of the function (if
> variable assignments persist after the completion of the function)"
POSIX used to require the current dash behaviour. However, you're
right that this is no longer the case.
This patch will remove the persistence of the variable assignment.
I have considered the exporting the variables during the function
execution but have decided against it because:
1) It makes the code bigger.
2) dash has never done this in the past.
3) You cannot use this portably anyway.
Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The parsing of parameter expansion inside inner double quotes
breaks because we never look for ENDVAR while innerdq is true.
echo "${x#"${x+''}"''}
This patch fixes it by pushing the syntax stack if innerdq is
true and we enter a new parameter expansion.
This patch also fixes a corner case where a bad substitution error
occurs within arithmetic expansion.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes: ab1cecb40478 (" parser: Add syntax stack for recursive...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
dash -c 'echo ${}' should print "Bad subtitution" but instead
fails with "Syntax error: Missing '}'". This is caused by us
reading an extra character beyond the right brace. This patch
fixes it so that this construct only fails during expansion rather
than during parsing.
Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Op 27-03-18 om 20:23 schreef Larry Hynes:
> Funny, I did wonder if it might be a contraction, but I did find
> it odd that it's not mentioned or explained. I'll leave it be, if
> you all are happy enough to keep it 'as is', or can resubmit if you
> think it's warranted.
I think the simple fact that it came up here is evidence that this is
too jargony for a manual. Patch attached.
- M.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Mon, Mar 26, 2018 at 07:25:20PM +0200, Martijn Dekker wrote:
> Op 26-03-18 om 17:38 schreef Harald van Dijk:
> > And not by dash 0.5.4. Like I wrote, dash 0.5.5 had some bugs that were
> > fixed in 0.5.6, which mostly restored the behaviour to match <0.5.5.
>
> Ah, sorry. dash 0.5.4 and earlier don't compile on my system, so they
> are not included in my conveniently accessible arsenal of test shells.
>
> > As for my patches, that was by accident and doesn't work reliably. When
> > the shell sees no metacharacters, pathname expansion is bypassed, and
> > backslash isn't considered a metacharacter. Which got me to my original
> > example of /de\v: there are no metacharacters in there, so the shell
> > doesn't look to see if it matches anything. Which seems highly
> > desirable: the shell shouldn't need to hit the file system for words not
> > containing metacharacters. The only way then to get consistent behaviour
> > is if the backslash is taken as quoted, so I'm not tempted to argue for
> > the behaviour you're hoping for, sorry. :)
Here is a better example:
a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b
dash currently prints
/*/\nullx
/*/\null
bash prints
/*/\nullx
/dev/null
You may argue the bash behaviour is inconsistent but it actually
makes sense. What happens is that quote removal only applies to
the original token as seen by the shell. It is never applied to
the result of parameter expansion.
Now you may ask why on earth does the second line say "/dev/null"
instead of "/dev/\null". Well that's because it is not the quote
removal step that removed the backslash, but the pathname expansion.
The fact that the /de\v does not become /dev even though it exists
is just the result of the optimisation to avoid unnecessarily
calling stat(2). I have checked POSIX and I don't see anything
that forbids this behaviour.
So going back to dash yes I think we should adopt the bash behaviour
for pathname expansion and keep the existing case semantics.
This patch does exactly that. Note that this patch does not work
unless you have already applied
https://patchwork.kernel.org/patch/10306507/
because otherwise the optimisation mentioned above does not get
detected correctly and we will end up doing quote removal twice.
This patch also updates expmeta to handle naked backslashes at
the end of the pattern which is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I've attached a patch which adds the subdir-objects option to AM_INIT_AUTOMAKE.
For a while now when I've compiled dash I received a warning from
automake that there are source files in a subdirectory but that the
subdir-objects automake option was not supplied. I've just been adding
it myself, but I finally got around to submitting a patch. The code
still compiles for now (i'm using automake 1.15.1), but warning text
is rarely nice to see and, if the warning text is to be believed, then
the warning will eventually become an error.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When evalcommand invokes a command that modifies parsefile and
then bails out without popping the file, we need to ensure the
input file is restored so that the shell can continue to execute.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently dash does not reap dead children after built-in commands
or functions. This means that if you construct a loop consisting
of solely built-in commands and functions, then zombies can hang
around indefinitely.
This patch fixes this by reaping when necessary after each built-in
command and function.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The noclobber code has a typo in it that causes it to fail. This
patch fixes it.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It's been a while since we disabled glob(3) support by default.
It appears to be working now, however, we have to change our
code to detect the no-match case correctly.
In particular, we need to test for GLOB_NOMAGIC | GLOB_NOCHECK
instead of GLOB_MAGCHAR.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The native version of expandmeta allocates a buffer that may be
overrun for two reasons. First of all the size is 1 byte too small
but this is normally hidden because the minimum size is rounded
up to 2048 bytes. Secondly, if the directory level is deep enough,
any buffer can be overrun.
This patch fixes both problems by calling realloc when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently echocmd uses print_escape_str to do everything apart
from printing the spaces/newlines separating its arguments. This
patch moves the actual printing into print_escape_str as well
using the format parameter.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit d6c0e1e2ffbf7913ab69d51cc794d48d41c8fcb1 ("[BUILTIN]
Handle embedded NULs correctly in printf") caused a performance
regression in the echo built-in because every echo call now goes
through the printf %b slow path where the string is always printed
twice to ensure the space padding is correct in the presence of
NUL characters. In fact this regression applies to printf %b as
well.
This is easily fixed by making printf %b take the fast path when
no precision/field width modifiers are present.
This patch also changes the second strchurnul call to strspn which
generates slightly better code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Harald van Dijk <harald@gigawatt.nl> wrote:
> On 22/03/2018 22:38, Martijn Dekker wrote:
>> Op 22-03-18 om 20:28 schreef Harald van Dijk:
>>> On 22/03/2018 03:40, Martijn Dekker wrote:
>>>> This patch fixes the bug that, given no positional parameters, unquoted
>>>> $@ and $* incorrectly generate one empty field (they should generate no
>>>> fields). Apparently that was a side effect of the above.
>>>
>>> This seems weird though. If you want to remove the recording of empty
>>> regions because they are pointless, then how does removing them fix a
>>> bug? Doesn't this show that empty regions do have an effect? Perhaps
>>> they're not supposed to have any effect, perhaps it's a specific
>>> combination of empty regions and something else that triggers some bug,
>>> and perhaps that combination can no longer occur with your patch.
>>
>> The latter is my guess, but I haven't had time to investigate it.
>
> Looking into it again:
>
> When IFS is set to an empty string, sepc is set to '\0' in varvalue().
> This then causes *quotedp to be set to true, meaning evalvar()'s quoted
> variable is turned on. quoted is then passed to recordregion() as the
> nulonly parameter.
>
> ifsp->nulonly has a bigger effect than merely selecting whether to use
> $IFS or whether to only split on null bytes: in ifsbreakup(), nulonly
> also causes string termination to be suppressed. That's correct: that
> special treatment is required to preserve empty fields in "$@"
> expansion. But it should *only* be used when $@ is quoted: ifsbreakup()
> takes nulonly from the last IFS region, even if it's empty, so having an
> additional zero-length region with nulonly enabled causes confusion.
>
> Passing quoted by value to varvalue() and not attempting to modify it
> should therefore, and in my quick testing does, also work to fix the
> original $@ bug.
You're right. The proper fix to this is to ensure that nulonly
is not set in varvalue for $*. It should only be set for $@ when
it's inside double quotes.
In fact there is another bug while we're playing with $@/$*.
When IFS is set to a non-whitespace character such as :, $*
outside quotes won't remove empty fields as it should.
This patch fixes both problems.
Reported-by: Martijn Dekker <martijn@inlv.org>
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Fri, Mar 16, 2018 at 11:27:22AM +0800, Herbert Xu wrote:
> On Thu, Mar 15, 2018 at 10:49:15PM +0100, Harald van Dijk wrote:
> >
> > Okay, it can be trivially modified to something that does work in other
> > shells (even if it were actually executed), but gets rejected at parse time
> > by dash:
> >
> > if false; then
> > : ${$+
> > }
> > fi
>
> That's just a bug in dash's parser with ${} in general, because
> it bombs out without the if clause too:
>
> : ${$+
> }
This patch fixes the parsing of newlines with parameter substitution.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Sun, Mar 04, 2018 at 12:44:59PM +0100, Harald van Dijk wrote:
>
> command: set -- a ""; space=" "; printf "<%s>" "$@"$space
> bash: <a><>
> dash 0.5.8: <a>< >
> dash 0.5.9.1: <a>< >
> dash patched: <a><>
This is actually composed of two bugs. First of all our tracking
of quotemark is wrong so anything after "$@" becomes quoted. Once
we fix that then the problem is that the first space character
after "$@" is not recognised as an IFS.
This patch fixes both.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This reverts commit 7bb413255368e94395237d789f522891093c5774.
The commit breaks printf with more than argument.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|