summary refs log tree commit diff
Commit message (Collapse)AuthorAge
* [BUILTIN] Use intmax_t arithmetic in testHerbert Xu2007-10-06
| | | | | This patch adds the function atomax10 and uses it in test(1) so that we support intmax_t comparisons.
* [VAR] Remove setvarsafeHerbert Xu2007-10-06
| | | | | The only user of setvarsafe is getopts. However, we can achieve the same result by pre-setting the value of shellparam.optind.
* [BUILTIN] Treat OPTIND=0 in the same way as OPTIND=1Herbert Xu2007-10-06
| | | | | | | | Previously setting OPTIND to 0 would cause subsequent getopts calls to fail. This patch makes dash reset the getopts parameters the same way as OPTIND=1. Both behaviours are allowed by POSIX but other common shells do tolerate this case.
* [MEMALLOC] Add pushstackmarkHerbert Xu2007-10-06
| | | | | | | | This patch gets rid of the stack mark tracking hack by allocating a little bit of stack memory if we're at risk of planting a stack mark which may be grown later. To do this a new function pushstackmark is added which lets the user pick a bigger amount to allocate since some users do that anyway after setting a stack mark.
* [MEMALLOC] Made grabstackblock an inline wrapper for stallocHerbert Xu2007-10-05
| | | | | The function grabstackblock is identical in semantics to stalloc within its input constraints.
* [PARSER] Size optimisations in parameter expansion parserHerbert Xu2007-10-04
| | | | | | | Merge flags into subtype. Do not write subtype out twice. Add likely flag on ${ vs. $NAME. Kill unnecessary (and bogus) PEOA check.
* [PARSER] Fix parsing of ${##1}Herbert Xu2007-10-04
| | | | | | | | | | | | | | | | | Previously dash treated ${##1} as a length operation. This patch fixes that. Test case: set -- a echo ${##1}OK Old result: 1OK New result: OK
* [BUILD] Add --enable-static option to configure.Alexey Gladkov2007-10-04
| | | | Add new option to build statical linked dash.
* [PARSER] Recognise here-doc delimiters terminated by EOFHerbert Xu2007-09-26
| | | | | | | | | | | | | | | | | | | | | | | | Previously dash required a <newline> character to be present in order for a here-document delimiter to be detected. Allowing EOF in the absence of a <newline> to play the same purpose allows some intuitive scripts to succeed. POSIX seems to be silence on this so this should be OK. Test case: eval 'cat <<- NOT test NOT' echo OK Old result: test NOTOK New result: test OK
* [EXPAND] Refresh stack pointers after makestrspace in _rmescapesRoy Marples2007-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | dash-0.5.3 has an issue reading some line lengths [1]. This is reproducable on amd64, but not on other arches for some reason. $ cat bug.sh (read line; echo "${line%%=*}") <<EOF TITLE=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx+xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx EOF printf "\ TITLE=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx+xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx " | (read line; echo "${line%%=*}") $ bash bug.sh TITLE TITLE $ dash bug.sh TITLE=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx+xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TITLE Attahced is a patch to fix the issue Thanks Roy [1] http://bugs.gentoo.org/show_bug.cgi?id=180680
* [MAN] Clarify syntax of the for commandGerrit Pape2007-09-25
| | | | | | | | Document that in a for loop 'in word ...' is optional, and if omitted, 'in "$@"' is used. Lars Wilke noticed this, and reported through http://bugs.debian.org/387441
* [MAN] Clarify description of -nt, -ot options to test builtinGerrit Pape2007-09-25
| | | | | | | | | Have the man page explicitely state how the test builtin behaves on -nt and -ot options if file2 does not exist. The case where file1 does not exist was already documented properly. This was noticed by Sven Mueller and reported through http://bugs.debian.org/373611
* [EXPAND] Move parse-time quote flag detection to run-timeHerbert Xu2007-09-25
| | | | | | | | | | | | | | | | | | | | Because the parser does not recursively parse parameter expansion with respect to quotes, we can't accurately determine quote status at parse time. This patch works around this by moving the quote detection to run-time where we do interpret it recursively. Test case: foo=\\ echo "<${foo#[\\]}>" Old result: <\> New result: <>
* [EXPAND] Do not expand tilde in parameter expansion within quotesHerbert Xu2007-09-25
| | | | | | | | | | | | | | | | | | | | | | | Previously code was added so that tilde expansion was carried out parameter expansions within double quotes. This change was made with reference the behaviour of bash at the time. Bash has since be fixed so that this behaviour no longer occurs which is in line with most other POSIX shells. So this patch removes that behaviour in dash as well. Test case: unset a echo "${a:-~root}" Old result: /root New result: ~root
* [PARSER] Remove arithmetic expansion collapsing at parse timeHerbert Xu2007-09-24
| | | | | | | | | | | | | | | | | | | Collapsing arithmethc expansion is incorrect when the inner arithmetic expansion is a part of a parameter expansion. Test case: unset a echo $((3 + ${a:=$((4 + 5))})) echo $a Old result: (4 + 5) New result: 9
* [PARSER] Remove superfluous dblquote settings when ending arithHerbert Xu2007-09-24
| | | | | | When an arithmetic expansion terminates and we restore the syntax to the previous one, we don't need to set dblquote because we never changed upon entering the arithmetic expansion.
* [PARSER] Remove superfluous arinest test for dqvarnestHerbert Xu2007-09-24
| | | | | | dqvarnest is only used to determine whether CENDQUOTE should terminate the double-quote syntax. Since CENDQUOTE can never occur while arinest is set, we don't need to take arinest into account for dqvarnest.
* [PARSER] Remove superfluous arinest test in CENDQUOTEHerbert Xu2007-09-24
| | | | | If arinest is set then the syntax must be ARISYNTAX. As such CENDQUOTE can never occur while arinest is set so we don't need to test for it.
* [EXPAND] Perform tilde expansion in all parameter expansion wordsHerbert Xu2007-09-24
| | | | | | | | | | | | | | | | | | Previously tilde expansion was not carried out for =?#% expansion words. This is contrary to the POSIX specification. Test case: a=~root:~root echo ${a#~root} Old result: /root:/root New result: :/root
* [EXPAND] Do not quote back slashes in parameter expansions outside quotesHerbert Xu2007-09-24
| | | | | | | | | | | | | | | | Test case: a=/b/c/* b=\\ echo ${a%$b*} Old result: /b/c/* New result: /b/c/
* [BUILTIN] test: little size and speed optimizationsOleg Verych2007-09-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Speed up (libc=glibc): deen:debian/src/dash-0.5.3# echo $(((7853+8631+7529+9777+9161+7552)/6)) 8417,8250 # this patch deen:/mnt/work/debian/src/dash-0.5.3# echo $(((9553+7789+9450+9925+7595+9590)/6)) 8983 # short deen:debian/src/dash-0.5.3# echo $(( (9655+7853+9733+7826+9618+10053)/6 )) 9123 # '[' ']' deen:debian/src/dash-0.5.3# deen:debian/src/dash-0.5.3# echo $(((9231+9423+9365+9650+8883+8291)/6)) 9140 # unpatched deen:debian/src/dash-0.5.3# * Size down: olecom@deen:/mnt/debian/src/dash-0.5.3$ size src/test.o # this patchset text data bss dec hex filename 4142 0 16 4158 103e src/test.o olecom@deen:/mnt/debian/src/dash-0.5.3$ size src/test.o text data bss dec hex filename 4209 0 16 4225 1081 src/test.o olecom@deen:/mnt/debian/src/dash-0.5.3$
* [BUILTIN] test: White space fixesOleg Verych2007-09-22
| | | | Some trailing whitespace was killed or tabified.
* [SHELL] Move flushall to the point just before _exitHerbert Xu2007-09-22
| | | | | | We need to flush at the very end in case we've generated any errors before that. The flushall call cannot perform a longjmp so it's safe there.
* [SHELL] Restore foreground process group on exitHerbert Xu2007-09-22
| | | | | | | | | | | | | | | | | On Thu, Jun 07, 2007 at 12:20:27PM +0200, Denis Vlasenko wrote: > > When I start dash under Midnight Commander and then type 'exit', dash > exits all right, but then MC is sent to background. It happens because > dash does not restore current process group on exit. > > Attached patch fixes this. It also fixes another bug: setjobctl(0) > must ignore tcsetpgrp errors, because there are cases when tty is > destroyed under dash. > > Patch is run-tested. I've fixed this slightly differently so that we don't need the xtcsetpgrp change.
* Release 0.5.4.Herbert Xu2007-07-12
|
* [REDIR] Size optimisations in redir.cHerbert Xu2007-05-12
| | | | | | Add likely flag on REDIR_PUSH. Remove sv check on REDIR_SAVEFD2 (it implies REDIR_PUSH). Optimise NTOFD/NFROMFD same fd check.
* [REDIR] Fix redirect restore on saved file descriptorsHerbert Xu2007-05-12
| | | | | | | | | | | | | | As it stands if a redirection occurs on a file descriptor that was previously closed, it won't be closed after that redirection goes out of effect. This is because we don't keep track of closed file descriptors properly as we do for open ones. This patch fixes this by introducing two new states, CLOSED and REALLY_CLOSED. The first represents an initially closed descriptor which is now open while the second one represents an initally closed descriptor which is now closed. This patch is based on work by Rainer Weikusat.
* [REDIR] Remove redundant CLOEXEC callsHerbert Xu2007-05-12
| | | | | Now that we're marking file descriptors as CLOEXEC in savefd, we no longer need to close them on exec or in setinputfd.
* [REDIR] Replace copyfd by savefd and use dup2 elsewhereHerbert Xu2007-05-12
| | | | | | | There are two kinds of users to copyfd, those that want to copy an fd to an exact value and those that want to move an fd to a value >= 10. The former can simply use dup2 directly while the latter share a lot of common code that now constitutes savefd.
* [EVAL] Use dup2 instead of copyfd in evalbackcmdHerbert Xu2007-05-06
| | | | Since we know that dup2 must succeed here we can call it directly.
* [REDIR] Remove EMFILE special caseHerbert Xu2007-05-06
| | | | | No caller of copyfd need to ignore EMFILE so we can remove the special case and just let it call sh_error on any error.
* [PARSER] Remove unnecessary inclusion of redir.hHerbert Xu2007-05-06
|
* [PARSER] Fix typo in commentHerbert Xu2007-05-05
| | | | The value for CTLBACKQ | CTLQUOTE is now -123, not 133.
* [BUILTIN] Fix mkbuiltin sort orderHerbert Xu2007-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Fri, Feb 16, 2007 at 04:24:55PM -0800, Dan Nicholson wrote: > I was having a problem building dash where `:' wasn't being recognized > as a builtin command. I won't bore you with the details of the > debugging, but it came down to the fact that the generated struct in > builtins.c wasn't being sorted correctly. The ":" name was coming > before the "." name and then was never able to be found by bsearch(). > > The issue turned out to be that I was building with a UTF-8 charset, > causing the `sort' to come out differently from the mkbuiltins script. > When I finally set LANG=C, it came out correct. Here's an example of > the difference. > > $ LANG=C sort << "EOF" > : > . > EOF > . > : > $ LANG=en_US.ISO-8859-1 sort << "EOF" > : > . > EOF > : > . > > My system has glibc-2.3.6, but I also tested it on an RHEL3 server at > work. My solution was just to add LC_ALL=C to the mkbuiltins script. > Maybe it's overkill to use LC_ALL. Patch against HEAD attached. I've changed this patch so that we just set LC_COLLATE for the sort command.
* [BUILTIN] Fixed command -v segmentation faultHerbert Xu2006-10-22
| | | | | | | | | | | | | | | On Sat, Oct 21, 2006 at 02:19:18PM +0000, Gerrit Pape wrote: > Hi Herbert, please see > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=387458 > > On Thu, Sep 14, 2006 at 03:50:02PM +0200, Julien Danjou wrote: > > I just found this bug which is easily reproductible: > > > > % dash -c 'command -v' > > zsh: segmentation fault dash -c 'command -v' Since bash's behaviour is minimalist here, I've decided to adopt its behaviour here as well which is to return success silently.
* [SYSTEM] Check return code for getgroups and fwriteAlexey Gladkov2006-10-13
| | | | | Check getgroups() and fwrite() return code, required to build with -D_FORTIFY_SOURCE=2.
* [EXPAND] Fixed inverted char class matchingHerbert Xu2006-10-04
| | | | | | | | The return value of ccmatch was being treated as 0 or 1 but it's actually zero or non-zero. This broke inverted character class matching. Reported by Alexander Skwar.
* [BUILD] Added --with-libedit option to configureAlexey Gladkov2006-05-23
| | | | | Add to the configure.ac new option: --with-libedit - Compile with libedit support.
* [PARSER] Only use signed char for syntax arraysHerbert Xu2006-04-23
| | | | | | | | | The existing scheme of using the native char for syntax array indicies makes cross-compiling difficult. Therefore it makes sense to choose one specific sign for everyone. Since signed chars are native to most platforms and i386, it makes more sense to use that if we are to choose one type for everyone.
* [PARSER] Use alloca to get rid of setjmpHerbert Xu2006-03-29
| | | | | Now that the only thing protected by setjmp/longjmp is the saved string, we can allocate it on the stack to get rid of the jump.
* [PARSER] Removed useless parsebackquote flagHerbert Xu2006-03-29
| | | | | The parsebackquote flag is only used in a test where it always has the value zero. So we can remove it altogether.
* [EVAL] Make eval with empty arguments return 0 Herbert Xu2006-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tue, Jan 10, 2006 at 10:56:23AM +0000, Gerrit Pape wrote: > tags 347232 + patch > quit > > On Mon, Jan 09, 2006 at 04:29:19PM +0100, Marco Nenciarini wrote: > > The problem is here: > > > > # Set the kernel 2.6 option only for fresh install > > test -z "$(GetMenuOpt "kopt" "")" && kopt_2_6="root=$root_device_2_6 ro" > > > > # Extract options for specific kernels > > eval $(ExtractMenuOpts "\(kopt_[a-zA-Z0-9_]\+\)") > > > > If the first test fails and the eval argument is empty then dash > > terminate with exitcode 1. > > > This is a simple testcase: > > tm:~# bash -c "set -e ;/bin/false && : ; eval ''; echo 'END'"; echo $? > > END > > 0 > > tm:~# dash -c "set -e ;/bin/false && : ; eval ''; echo 'END'"; echo $? > > 1 > > > > if you insert any command with successfull exit status before the > > empty eval, all work ok: > > tm:~# bash -c "set -e ;/bin/false && : ; : ; eval ''; echo 'END'"; echo $? > > END > > 0 > > tm:~# dash -c "set -e ;/bin/false && : ; : ; eval ''; echo 'END'"; echo $? > > END > > 0 > > Yes, I can confirm this is a bug in dash. The standard says > > EXIT STATUS > > If there are no arguments, or only null arguments, eval shall > return a zero exit status; otherwise, it shall return the exit > status of the command defined by the string of concatenated > arguments separated by <space>s. > > Hi Herbert, please see http://bugs.debian.org/347232 Changed evalstring to return the exit status instead of evalskip. This allows us to return zero if the string is empty.
* Release 0.5.3.Herbert Xu2005-11-26
|
* [BUILTIN] Fix \c spillage across echo commandsHerbert Xu2005-11-14
| | | | | | | | | | | | | | | | | | | | | On Thu, Nov 03, 2005 at 07:16:53PM +0100, Mike Hommey wrote: > Here is a simple test case: > > #!/bin/dash > echo test\\ test > echo '\c' > echo test\\ test > > it outputs: > test\ test > test\ > > This is due to mis-usage of a global variable. See attached patch for a > fix. Instead of setting rval when \c is detected, this is now set in the return value of conv_escape_str. This prevents the spillage reported in http://bugs.debian.org/337294.
* [BUILTIN] Always call conv_escape_str in echocmdHerbert Xu2005-11-13
| | | | | Instead of calling conv_escape_str when we detect a backslash we will call it unconditionally. This helps get rid of some unnecessary code in echocmd.
* [MEMALLOC] Remove unnecessary truncation in _STPUTCHerbert Xu2005-11-13
| | | | | Using char in the function argument causes unnecessary truncation to occur. This patch changes it to an int.
* [HELPER] Use mktemp if tempfile is not availableHerbert Xu2005-11-04
| | | | tempfile(1) is Debian-specific so let's use mktemp(1) as a fallback.
* [JOBS] Fixed support for disabling job controlHerbert Xu2005-10-30
| | | | | Since nobody has compiled with JOBS turned off for quite a while, it has bit-rotted. This patch makes it build again.
* [SYSTEM] Fixed fallback stpcpy implementationHerbert Xu2005-10-29
| | | | | | The implementation has an off-by-one bug. This results in random memory corruption. In one particular case, it caused certain bits of a function body to go missing.
* [SYSTEM] Added out-of-line ctypes functions for klibcHerbert Xu2005-10-29
| | | | | Unfortunately klibc doesn't provide out-of-line versions of ctypes functions such as isalpha. This is a nasty hack to create them.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-29 11:28:13 +0000