summary refs log tree commit diff
Commit message (Collapse)AuthorAge
...
* eval: avoid leaking memory associated with redirectionsHerbert Xu2019-02-25
| | | | | | | | | | | | | | | | | | | | | The following constructs result in ever-increasing memory usage: while true; do { true; } </dev/null; done while true; do ( true; ) </dev/null; done For comparison, bash displays static memory usage in both cases. This issue was reported for BusyBox ash which is derived from dash: https://bugs.busybox.net/show_bug.cgi?id=7748 Signed-off-by: Ron Yorston <rmy@frippery.org> I have simplified evaltree so that it simply sets the stack mark unconditionally. This allows us to remove the stack marks in the functions called by evaltree. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* system: Disable glibc warning on sigsetmaskHerbert Xu2018-12-14
| | | | | | | | | | | | As sigsetmask is set as deprecated in glibc this patch adds the pragmas to disable the warning in gcc around our one and only use of sigsetmask. It also disables it completely for non-gcc compilers and older gcc compilers as they may generate a warning too. Reported-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Use sh_warnx instead of warnxHerbert Xu2018-12-14
| | | | | | | | | | This patch fixes a typo in evalbltin where warnx was used instead of sh_warnx. Reported-by: Antonio Ospite <ao2@ao2.it> Fixes: 8e43729547b5 ("eval: Report I/O error on stdout") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* parser: Do not push token back before parseheredocHerbert Xu2018-12-14
| | | | | | | | | | | | | | | | | When we read the first token in list() we use peektoken instead of readtoken as the following code needs to use the same token again. However, this is wrong when we're in a here-document as it will clobber the saved token without resetting the tokpushback flag. This patch fixes it by doing the tokpushback after parseheredoc and setting lasttoken again if parseheredoc was called. Reported-by: Ron Yorston <rmy@frippery.org> Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...") Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Simon Ser <contact@emersion.fr>
* expand: Eat closing brace for length parameter expansionHerbert Xu2018-12-14
| | | | | | | | | | | | | When we are doing VSLENGTH expansion, the closing brace is currently not removed in evalvar. This causes the caller argstr to terminate prematurely as it would interpret the closing brace as one that belongs to a parameter expansion at the outer level. This patch fixes it. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: 3cd538634f71 ("expand: Do not reprocess data when...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Use the correct expansion mode for fd redirectionHerbert Xu2018-12-14
| | | | | | | | | | | | | | | It has been reported that echo test >&$EMPTY_VARIABLE causes dash to segfault. This is a symptom of the bigger problem that dash tries to perform pathname expansion as well as field splitting on the word after >& and <&. This is wrong and this patch fixes it to use the same expansions as done on a normal redirection. Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Silence compiler warning about missing parenthesesAntonio Ospite2018-12-14
| | | | | | | | | | | | | | | | | | | | Gcc gives a warning about some missing parentheses: ----------------------------------------------------------------------- eval.c: In function ‘evaltree’: eval.c:282:15: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!status == isor || evalskip) ^~ eval.c:282:7: note: add parentheses around left hand side expression to silence this warning if (!status == isor || evalskip) ^~~~~~~ ( ) ----------------------------------------------------------------------- Add the parentheses to silence the warning. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* shell: Enable automake silent rulesAntonio Ospite2018-12-14
| | | | | | | | | | | | | Enable automake silent rules to make it easier to spot compilation problems. Silent rules will be enabled by default, but only if they are available, in order to keep compatibility with older autotools versions. Prepend the silent strings also to custom rules. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* shell: Update configure.ac with suggestions from autoupdateAntonio Ospite2018-12-14
| | | | | | | | | | | | | | Apply the changes suggested by running autoupdate on the source repository: 1. Properly quote AC_INIT arguments. 2. Use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE. The former is a superset of the latter, and enables more options, see https://www.gnu.org/software/autoconf/manual/autoconf-2.60/html_node/Posix-Variants.html Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: make traps work when "set -e" is enabledAntonio Ospite2018-12-14
| | | | | | | | | | | | | | | | | | | | | | | | | | When "set -e" is enabled traps are not always executed, in particular the EXIT trap is not executed when the shell exits on an unhandled error. Consider the following test script: #!/bin/dash set -e trap 'ret=$?; echo "EXIT: $ret"' EXIT trap 'exit 2' HUP INT QUIT PIPE TERM read variable By pressing Ctrl-C one would expect the EXIT trap to be called, as it is the case with other shells (bash, zsh), but dash does not do it. By calling dotrap() before jumping to the exit path when checkexit is not zero, dash behaves like other shells. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Fix multiple issues with EXP_DISCARD in evalvarHerbert Xu2018-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter expansion in multiple ways because the EXP_DISCARD flag wasn't set or tested for various cases: $ src/dash -c 'var=; echo ${var:+nonempty}' nonempty $ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}' dash: 1: bar: parameter not set $ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo' barBUG bar $ This patch fixes them by introducing a new discard variable that tracks whether the extra word should be discarded or not when it is parsed. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: 3cd538634f71 ("expand: Do not reprocess data when...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* main: Print \n upon EOF (CTRL-D) when run interactivelyGerrit Pape2018-11-19
| | | | | | | | | | | | | | | | | | | | | | Exiting dash via a ^D instead of with "exit" causes dash to forget to print a newline. sh-3.1$ sh sh-3.1$ ^D sh-3.1$ dash $ sh-3.1$ It is more neat and tidy to send a newline similarly to what bash does, so it doesn't make the next prompt of the parent shell look ugly. Suggested by jidanni. Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> [reworded the patch description] Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Bug-Debian: http://bugs.debian.org/476422 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Report I/O error on stdoutGerrit Pape2018-11-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ENOSPC as a result of an echo builting failing gives no diagnostic. Just as other shells, dash sets $? to 1, but aside from terminating the script, this does not inform the user what the problem is: zsh: % echo foo > /dev/full echo: write error: no space left on device bash: $ echo foo > /dev/full bash: echo: write error: No space left on device dash: $ echo foo > /dev/full [nothing] Print an error to stderr like the other shells. Suggested by Roger Leigh. Signed-off-by: Gerrit Pape <pape@smarden.org> [reworded the patch description with information from the bug] Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Bug-Debian: http://bugs.debian.org/690473 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* builtin: Default to mktemp, not tempfileAndrej Shadura2018-11-19
| | | | | | | | Don't use tempfile, as it currently runs tempnam(), which is insecure and fails under pseudo(1). Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* shell: update .gitignoreMartijn Dekker2018-11-19
| | | | | | Ignore .deps and .dirstamp in all directories. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* man: Problems in dash.1, sh.1, sh.distrib.1esr@thyrsus.com2018-08-29
| | | | | | | | | | | | | | | | | This is automatically generated email about markup problems in a man page for which you appear to be responsible. If you are not the right person or list, please tell me so I can correct my database. See http://catb.org/~esr/doclifter/bugs.html for details on how and why these patches were generated. Feel free to email me with any questions. Note: These patches do not change the modification date of any manual page. You may wish to do that by hand. I apologize if this message seems spammy or impersonal. The volume of markup bugs I am tracking is over five hundred - there is no real alternative to generating bugmail from a database and template. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Ensure result is escaped in cvtnumHerbert Xu2018-08-29
| | | | | | | | | | | The minus sign generated from arithmetic expansion is currently unquoted which causes anomalies when the result is used in where the quoting matters. This patch fixes it by explicitly calling memtodest on the result in cvtnum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* memalloc: Avoid looping in growstacktoHerbert Xu2018-08-29
| | | | | | | | Currently growstackto will repeatedly call growstackblock until the requisite size is obtained. This is wasteful. This patch changes growstackblock to take a minimum size instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Always set localvar_stopHerbert Xu2018-08-29
| | | | | | | | | | The variable localvar_stop is set iff vlocal is true. gcc doesn't get this so we get a spurious warning. This patch fixes this by always calling pushlocalvars with vlocal and making it only actually do the push if vlocal is non-zero. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Do not reprocess data when expanding wordsHerbert Xu2018-08-29
| | | | | | | | | | | | | | | | | | | | | | | | Currently various paths will reprocess data when performing word expansion. For example, expari will skip backwards looking for the start of the arithmetic expansion, while evalvar will skip unexpanded words manually. This is cumbersome and error-prone. This patch fixes this by making word expansions proceed in a linear fashion. This means changing argstr and the various expansion functions such as expari and subevalvar to return the next character to be expanded. This is inspired by similar code from FreeBSD. However, we take things one step further and completely remove the manual word skipping in evalvar. This is accomplished by introducing a new EXP_DISCARD flag that tells argstr to only parse and not produce any actual expansions. Incidentally, argstr will now always NUL-terminate the expansion unless the EXP_WORD flag is set. This is because all but one caller of argstr wants the result to be NUL-termianted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Fix skipping of command substitution when trimming in evalvarHerbert Xu2018-08-29
| | | | | | | | | When we are trimming an unset variable in evalvar, any embedded command substitution that should have been skipped are not. This can cause them to be evaluated later should there be other command substitutions in the same input word. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Merge syntax/quotes in memtodest with flagsHerbert Xu2018-08-29
| | | | | | | | | | | | | | | | The function arguments syntax and quotes are both derived from the expansion flags. As syntax is only used by memtodest we do not need to maintain it outside of the function at all. The only place that uses something other than BASESYNTAX or DQSYNTAX is exptilde. However in that case DQSYNTAX has exactly the same effect as SQSYNTAX. This patch merges these two arguments into a single flags. The macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order to keep the namespace separate. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* expand: Use HOME in tilde expansion when it is emptyHerbert Xu2018-08-29
| | | | | | | | Currently if HOME is set to empty tilde expansion will fail, i.e., it will remain as a literal tilde. This patch changes it to return the empty string as required by POSIX. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* shell: Don't include config.h for native helpersPeter Korsgaard2018-08-29
| | | | | | | | | | | | | | | | | | | | | | | config.h contains settings for the cross compiler (most importantly 32/64bit versions of functions), so don't include it when calling the native compiler to build the helpers. Otherwise we get build errors like: /usr/bin/gcc -include ../config.h -DBSD=1 -DSHELL -DIFS_BROKEN -g -O2 -Wall -o mkinit mkinit.c In file included from /usr/include/sys/stat.h:107, from /usr/include/fcntl.h:38, from mkinit.c:50: /usr/include/bits/stat.h:117: error: redefinition of ‘struct stat’ In file included from /usr/include/fcntl.h:38, from mkinit.c:50: /usr/include/sys/stat.h:504: error: redefinition of ‘stat’ /usr/include/sys/stat.h:455: note: previous definition of ‘stat’ was here Signed-off-by: Peter Korsgaard <peter@korsgaard.com> [baruch: apply to Makefile.am; update Peter's email address] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* builtin: Use test_access from NetBSD when faccessat is unavailableHerbert Xu2018-05-28
| | | | | | | | This patch adds the test_access code from NetBSD when faccess is unavailable. The code has been modified so that root can always read/write any file. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Add vfork supportHerbert Xu2018-05-28
| | | | | | This patch adds basic vfork support for the case of a simple command. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Replace with listsetvar with mklocal/setvareqHerbert Xu2018-05-28
| | | | | | | | | | | | This patch replaces listsetvar with mklocal/setvareq. As we now determine special built-in status prior to variable assignment, we no longer have to do a second pass listsetvar. Instead we will call setvareq directly instead of mklocal when necessary. In order to do this mklocal can now take a flag in order to mark a variable for export. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Fail immediately with redirections errors for simple commandHerbert Xu2018-05-28
| | | | | | | | Previously, dash would continue to perform variable expansions even if a redirection error occured. This patch changes it so that it fails immediately. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* eval: Add assignment built-in support againHerbert Xu2018-05-28
| | | | | | | | | | | This patch adds assignment built-in support that used to exist in dash prior to 0.3.8-15. This is because it will soon be part of POSIX, and the semantics are now much better defined. Recognition is done at execution time, so even "command -- export" or "var=export; command $var" should work. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* exec: Never rehash regular built-insHerbert Xu2018-05-28
| | | | | | | As regular (including special) built-ins can never be overridden, we should never remove them from the hash table. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* exec: Stricter pathopt parsingHerbert Xu2018-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the parsing of pathopt. First of all only %builtin and %func (with arbitrary suffixes) will be recognised. Any other pathopt will be treated as a normal directory. Furthermore, pathopt can now be specified before the directory, rather than after it. In fact, a future version may remove support for pathopt suffixes. Wherever the pathopt is placed, an optional % may be placed after it to terminate the pathopt. This is so that it is less likely that a genuine directory containing a % sign is parsed as a pathopt. Users of padvance outside of exec.c have also been modified: 1) cd(1) will always treat % characters as part of the path. 2) chkmail will continue to accept arbitrary pathopt. 3) find_dot_file will ignore the %builtin pathopt instead of trying to do a stat in the accompanying directory (which is usually the current directory). The patch also removes the clearcmdentry optimisation where we attempt to only partially flush the table where possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* builtin: Mark more regular built-insHerbert Xu2018-05-28
| | | | | | | | | | | | This patch marks the following built-ins as regular, meaning that they cannot be overriden using PATH search: hash pwd type ulimit Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* exec: Do not allocate stack string in padvanceHerbert Xu2018-05-28
| | | | | | | | | | | Many callers of padvance immediately free the allocated string so this patch moves the stalloc call to the caller. Instead of returning the allocated string, padvance now returns the length to allocate (this may be longer than the actual string length, even including the NUL). For the case where we would previously return NULL, we now return -1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* memalloc: Add growstackto helperHerbert Xu2018-05-28
| | | | | | | This patch adds the growstackto helper which repeatedly calls growstackblock until the requested size is reached. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* jobs: Replace some uses of fmtstr with stpcpy/stpncpyHerbert Xu2018-05-28
| | | | | | | | | Some uses of fmtstr, particularly the ones without a format string, can be replaced with stpcpy or stpncpy. This patch does that so we don't have to introduce unnecessary format strings in order to silence compiler warnings. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* output: Fix fmtstr return valueHerbert Xu2018-05-28
| | | | | | | The function fmtstr is meant to return the actual length of output produced, rather than the untruncated length. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* var: Set IFS to fixed value at start timeHerbert Xu2018-05-28
| | | | | | | | | This patch forces the IFS variable to always be set to its default value, regardless of the environment. It also removes the long unused IFS_BROKEN code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* parser: Save/restore here-documents in command substitutionHerbert Xu2018-05-28
| | | | | | | | | | | | This patch changes the parsing of here-documents within command substitution, both old style and new style. In particular, the original here-document list is saved upon the beginning of parsing command substitution and restored when exiting. This means that here-documents outside of command substitution can no longer be filled by text within it and vice-versa. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* jobs: Only clear gotsigchld when waiting for everythingHerbert Xu2018-05-28
| | | | | | | | | | | | | | | | | | | | | The gotsigchld flag is always cleared in dowait but not all callers of dowait will wait for everything. In particular, when jp is set we only wait until the set job isn't running anymore. This patch fixes this by only clearing gotsigchld if jp is unset. It also changes the waitcmd to actually set jp which corresponds to the behaviour of bash/ksh93/mksh. The only other caller of dowait that doesn't wait for everything is the jobless reaper. This is in fact redundant now that we wait after every simple command. This patch removes it. Finally as every caller of dowait needs to wait until either the given job is not running, or until all terminated jobs have been processed, this patch moves the loop into dowait itself. Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* mkinit: Split reset into exitreset and resetHerbert Xu2018-05-28
| | | | | | | | | | | | | Previously reset was called after exitshell. This was changed so that it was called before exitshell because certain state needed to be reset in order for the EXIT trap to work. However, this caused issues because certain other states (such as local variables) should not be reset. This patch fixes this by creating a new function exitreset that is called prior to exitshell and moving reset back to its original location. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* main: Only set savestatus in exitcmdHerbert Xu2018-05-28
| | | | | | | | | | Currently exitcmd sets exitstatus and then savestatus if the latter was previously set. In fact, as exitcmd always raises an exception and will either end up in the setjmp call in main() or exitshell(), where exitstatus is always replaced by savestatus if set, we only need to set savestatus. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* exec: Return 126 on most errors in shellexecHerbert Xu2018-05-28
| | | | | | | | | | | Currently when shellexec fails on most errors the shell will exit with exit status 2. This patch changes it to 126 in order to avoid ambiguities with the exit status from a successful exec. The errors that result in 127 has also been expanded to include ENOTDIR, ENAMETOOLONG and ELOOP. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Release 0.5.10.2.Herbert Xu2018-05-17
|
* parser: Fix incorrect eating of backslash newlinesHerbert Xu2018-05-15
| | | | | | | | | | | | | | With the introduction of synstack->syntax, a number of references to the syntax variable was missed during the conversion. This causes backslash newlines to be incorrectly removed in single quote context. This patch also combines these calls into a new helper function pgetc_top. Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...") Reported-by: Leah Neukirchen <leah@vuxu.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Release 0.5.10.1.Herbert Xu2018-05-10
|
* jobs - Do not block when waiting on SIGCHLDHerbert Xu2018-05-09
| | | | | | | | | | | | | | | Because of the nature of SIGCHLD, the process may have already been waited on and therefore we must be prepared for the case that wait may block. So ensure that it doesn't by using WNOHANG. Furthermore, multiple jobs may have exited when gotsigchld is set. Therefore we need to wait until there are no zombies left. Lastly, waitforjob needs to be called with interrupts off and the original patch broke that. Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Release 0.5.10.Herbert Xu2018-05-03
|
* eval: Variable assignments on functions are no longer persistentHerbert Xu2018-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dirk Fieldhouse <fieldhouse@gmx.net> wrote: > > In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open > Group Technical Standard Base Specifications, Issue 7") > <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>, > we read under '2.9.1 Simple Commands' > > "Variable assignments shall be performed as follows: > ... > - If the command name is a standard utility implemented as a function > (see XBD Utility), the effect of variable assignments shall be as if the > utility was not implemented as a function. > ... > - If the command name is a function that is not a standard utility > implemented as a function, variable assignments shall affect the current > execution environment during the execution of the function. It is > unspecified: > > * Whether or not the variable assignments persist after the > completion of the function > > * Whether or not the variables gain the export attribute during > the execution of the function > > * Whether or not export attributes gained as a result of the > variable assignments persist after the completion of the function (if > variable assignments persist after the completion of the function)" POSIX used to require the current dash behaviour. However, you're right that this is no longer the case. This patch will remove the persistence of the variable assignment. I have considered the exporting the variables during the function execution but have decided against it because: 1) It makes the code bigger. 2) dash has never done this in the past. 3) You cannot use this portably anyway. Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* parser: Fix parameter expansion inside inner double quotesHerbert Xu2018-04-19
| | | | | | | | | | | | | | | | | The parsing of parameter expansion inside inner double quotes breaks because we never look for ENDVAR while innerdq is true. echo "${x#"${x+''}"''} This patch fixes it by pushing the syntax stack if innerdq is true and we enter a new parameter expansion. This patch also fixes a corner case where a bad substitution error occurs within arithmetic expansion. Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Fixes: ab1cecb40478 (" parser: Add syntax stack for recursive...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* parser: Fix parsing of ${}Herbert Xu2018-04-19
| | | | | | | | | | | dash -c 'echo ${}' should print "Bad subtitution" but instead fails with "Syntax error: Missing '}'". This is caused by us reading an extra character beyond the right brace. This patch fixes it so that this construct only fails during expansion rather than during parsing. Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-07-05 05:27:00 +0000