| Commit message (Collapse) | Author |
|---|
|
With -fno-common, which will be enabled by default in GCC 10, we see
this error:
ld: input.o:(.bss+0x0): multiple definition of `el';
histedit.o:(.bss+0x8): first defined here
To fix this, simply remove the definition as it is not needed.
Signed-off-by: Jeroen Roovers <jer@gentoo.org>
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The mktokens script fails when /tmp isn't writable (e.g., when building
in a sandbox with a different TMPDIR). Replace absolute references to
/tmp to relative references to TMPDIR. If TMPDIR is unset or null,
default to /tmp.
The mkbuiltins script was already hardened to work relative to TMPDIR,
also defaulting to /tmp.
v2 ensures that TMPDIR is quoted.
v3 adds an extra quotation that prevents extra pathname expansions.
Signed-off-by: Michael Greenberg <michael.greenberg@pomona.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This script should print OK:
alias a="case x in " b=x
a
b) echo BAD;; esac
alias BEGIN={ END=}
BEGIN
cat <<- EOF > /dev/null
$(:)
EOF
END
: <<- EOF &&
$(:)
EOF
BEGIN
echo OK
END
However, because the value of checkkwd is either zeroed when it
shouldn't, or isn't zeroed when it should, dash currently gets
it wrong in every case.
This patch fixes it by saving checkkwd and zeroing it where needed.
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Fri, Dec 13, 2019 at 02:51:34PM +0000, Simon Ser wrote:
> Just noticed another dash bug: when setting invalid PS1 values dash
> enters an infinite loop.
>
> For instance, setting PS1='$(' makes dash print many of these:
>
> dash: 1: Syntax error: end of file unexpected (expecting ")")
>
> It would be nice to fallback to the default PS1 value on error.
This patch fixes it by using the literal value of PS1 should an
error occur during expansion.
On Wed, Feb 26, 2020 at 09:12:04PM +0000, Ron Yorston wrote:
>
> There's another case that should be handled. PS1='`xxx(`' causes the
> shell to exit because the old-style backquote leaves an additional file
> on the stack.
Ron's change has been folded into this patch.
Reported-by: Simon Ser <contact@emersion.fr>
Reported-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Dash was incorrectly handling empty aliases. When attempting to use an
empty alias with nothing else, I'm (incorrectly) prompted for more
input:
```
$ alias empty=''
$ empty
>
```
Other shells (e.g., bash, yash) correctly handle the lone, empty alias as an
empty command:
```
$ alias empty=''
$ empty
$
```
The problem here is that we incorrectly enter the loop eating TNLs
in readtoken(). This patch fixes it by setting checkkwd correctly.
Reported-by: Michael Greenberg <michael.greenberg@pomona.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After we changed the resetting of gotsigchld so that it is only
done if jp is NULL, we can now get an infinite loop in waitproc
if gotsigchld is set but there is no outstanding child because
everything had been waited for previously without gotsigchld being
zeroed.
This patch fixes it by always zeroing gotsigchld as we did before.
The bug that the previous patch was trying to fix is now resolved
by switching the blocking mode to DOWAIT_NORMAL after the specified
job has been completed so that we really do wait for all outstanding
dead children.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To make it clearer what it is doing: nonblocking wait()
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The seconds part of the times(1) built-in is wrong as it does not
exclude the minutes part of the result. This patch fixes it.
This problem was first noted by Michael Greenberg who also sent
a similar patch.
Reported-by: Michael Greenberg <michael.greenberg@pomona.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we enter a subshell we need to drop the saved redirections
as otherwise a subsequent unwindredir could produce incorrect
results.
This patch does this by simply clearing redirlist. While we
could actually free the memory underneath for subshells it isn't
really worth the trouble for now.
In order to ensure that this is done in every place where we enter
a subshell, this patch adds a new mkinit hook called forkreset.
The calls closescript, clear_traps and reset_handler are also added
to the forkreset hook.
This fixes a bug where the first two functions weren't called
if we enter a subshell without forking.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Thu, Apr 25, 2019 at 01:39:52AM +0000, Michael Orlitzky wrote:
> The POSIX spec says,
>
> The parameter name or symbol can be enclosed in braces, which are
> optional except for positional parameters with more than one digit or
> when parameter is a name and is followed by a character that could be
> interpreted as part of the name.
>
> However, dash seems to diverge from that behavior when we get to $10:
>
> $ cat test.sh
> echo $10
>
> $ dash ./test.sh one two three four five six seven eight nine ten
> ten
>
> $ bash ./test.sh one two three four five six seven eight nine ten
> one0
This patch should fix the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
According to POSIX.1-2008 we should remove newlines only at the end of
the substitution. Newlines-only substitions causes dash to remove
newlines before beggining of the substitution. The following code:
cat <<END
1
$(echo "")
2
END
prints "1<newline>2" instead of expected "1<newline><newline>2".
This patch fixes trailing newlines processing in backquote expanding.
Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On Wed, Jul 25, 2018 at 12:38:27PM +0000, project-repo wrote:
> Hi,
> I am working on a project in which I use the honggfuzz fuzzer to fuzz open
> source software and I decided to fuzz dash. In doing so I discovered a
> NULL pointer dereference in src/redir.ch on line 305. Following is a
> backtrace as supplied by the address sanitizer:
>
> AddressSanitizer:DEADLYSIGNAL
> =================================================================
> ==39623==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x0000005768ed bp 0x7ffc00273df0 sp 0x7ffc00273c60 T0)
> ==39623==The signal is caused by a READ memory access.
> ==39623==Hint: address points to the zero page.
> #0 0x5768ec in openhere /home/jfe/dash/src/redir.c:305:29
> #1 0x574d92 in openredirect /home/jfe/dash/src/redir.c:230:7
> #2 0x5737fe in redirect /home/jfe/dash/src/redir.c:121:11
> #3 0x576017 in redirectsafe /home/jfe/dash/src/redir.c:424:3
> #4 0x522326 in evalcommand /home/jfe/dash/src/eval.c:828:11
> #5 0x520010 in evaltree /home/jfe/dash/src/eval.c:288:12
> #6 0x5270da in evaltreenr /home/jfe/dash/src/eval.c:332:2
> #7 0x526f04 in evalbackcmd /home/jfe/dash/src/eval.c:640:3
> #8 0x539020 in expbackq /home/jfe/dash/src/expand.c:522:2
> #9 0x5332d7 in argstr /home/jfe/dash/src/expand.c:343:4
> #10 0x5322f7 in expandarg /home/jfe/dash/src/expand.c:196:2
> #11 0x528118 in fill_arglist /home/jfe/dash/src/eval.c:659:3
> #12 0x5213b6 in evalcommand /home/jfe/dash/src/eval.c:769:13
> #13 0x520010 in evaltree /home/jfe/dash/src/eval.c:288:12
> #14 0x554423 in cmdloop /home/jfe/dash/src/main.c:234:8
> #15 0x553bcc in main /home/jfe/dash/src/main.c:176:3
> #16 0x7f201c2b2a86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21a86)
> #17 0x41dfb9 in _start (/home/jfe/dash/src/dash+0x41dfb9)
>
> AddressSanitizer can not provide additional info.
> SUMMARY: AddressSanitizer: SEGV /home/jfe/dash/src/redir.c:305:29 in openhere
> ==39623==ABORTING
>
> This bug can be reproduced by running "dash < min" where min is þhe file
> attached. I was able to reproduce this bug with the current git version
> and the current debian version.
>
> cheers
> project-repo
>
> <<A
> `<<A(`
Thanks for the report! This is caused by the recent change to
save/restore here-docment list around command substitutions. In
doing so we must finish existing here-documents prior to restoring
the old here-document list. This is done for new-style command
substitutions but not for old-style.
This patch fixes it by doing it for both.
Reported-by: project-repo <bugs@feusi.co>
Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As it is a subshell can execute code that is only meant for the
parent shell when it executes a longjmp that is caught by something
like evalcommand. This patch fixes it by resetting the handler
when entering a subshell.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Due to a double decrement in argstr we may miss field separators
at the end of a word in certain situations.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We set commandname in procargs when we don't have to. This results
in a duplicated output of arg0 when an error occurs.
Reported-by: Olivier Duclos <odc@fastmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The value of REALLY_CLOSED is used to avoid an unnecessary close(2)
call when restoring redirections. However, as it stands it can
remove a close(2) call that's actually needed. This happens when
an enclosed exec(1) command leaves an open file descriptor behind.
This patch fixes this by replacing REALLY_CLOSED with closed_redirs
to track the current status of redirected file descriptors and
leaving redirlist to only handle the previous state of redirected
file descriptors.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: ce0f1900d869 ("[REDIR] Fix redirect restore on saved file...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Building with clang results in some warnings about the use of GNU
old-style field designators:
-----------------------------------------------------------------------
output.c:86:2: warning: use of GNU old-style field designator extension [-Wgnu-designator]
nextc: 0, end: 0, buf: 0, bufsize: OUTBUFSIZ, fd: 1, flags: 0
^~~~~~
.nextc =
...
-----------------------------------------------------------------------
Fix the issue bu using C99 initializers instead.
This should be safe and should not introduce any compatibility problems
as it is done already in other parts of the codebase, like
src/expand.c:ccmatch() and src/parser.c::readtoken1().
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Building with clang results in some warnings about integer values being
added to strings:
-----------------------------------------------------------------------
eval.c:1138:13: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
p = " %s" + (1 - sep);
~~~~~~^~~~~~~~~~~
eval.c:1138:13: note: use array indexing to silence this warning
p = " %s" + (1 - sep);
^
& [ ]
1 warning generated.
...
jobs.c:1424:16: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
str = "\"}" + !(quoted & 1);
~~~~~~^~~~~~~~~~~~~~~
jobs.c:1424:16: note: use array indexing to silence this warning
str = "\"}" + !(quoted & 1);
^
& [ ]
1 warning generated.
-----------------------------------------------------------------------
While the code itself is fine and the warnings are indeed harmless,
fixing them also makes the semantic more explicit: what it is actually
being increased is the address which points to the start of the string
in order to skip the initial character when some conditions are met.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
We unconditionally restore the saved status in exitreset, which
is incorrect as we only want to do it for exitcmd and returncmd.
This patch fixes the problem by introducing EXEND.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The following constructs result in ever-increasing memory usage:
while true; do { true; } </dev/null; done
while true; do ( true; ) </dev/null; done
For comparison, bash displays static memory usage in both cases.
This issue was reported for BusyBox ash which is derived from dash:
https://bugs.busybox.net/show_bug.cgi?id=7748
Signed-off-by: Ron Yorston <rmy@frippery.org>
I have simplified evaltree so that it simply sets the stack mark
unconditionally. This allows us to remove the stack marks in the
functions called by evaltree.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As sigsetmask is set as deprecated in glibc this patch adds the
pragmas to disable the warning in gcc around our one and only use
of sigsetmask.
It also disables it completely for non-gcc compilers and older
gcc compilers as they may generate a warning too.
Reported-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a typo in evalbltin where warnx was used instead
of sh_warnx.
Reported-by: Antonio Ospite <ao2@ao2.it>
Fixes: 8e43729547b5 ("eval: Report I/O error on stdout")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we read the first token in list() we use peektoken instead
of readtoken as the following code needs to use the same token
again. However, this is wrong when we're in a here-document as
it will clobber the saved token without resetting the tokpushback
flag.
This patch fixes it by doing the tokpushback after parseheredoc
and setting lasttoken again if parseheredoc was called.
Reported-by: Ron Yorston <rmy@frippery.org>
Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...")
Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Simon Ser <contact@emersion.fr>
|
|
When we are doing VSLENGTH expansion, the closing brace is currently
not removed in evalvar. This causes the caller argstr to terminate
prematurely as it would interpret the closing brace as one that
belongs to a parameter expansion at the outer level.
This patch fixes it.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It has been reported that
echo test >&$EMPTY_VARIABLE
causes dash to segfault. This is a symptom of the bigger problem
that dash tries to perform pathname expansion as well as field
splitting on the word after >& and <&. This is wrong and this
patch fixes it to use the same expansions as done on a normal
redirection.
Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Gcc gives a warning about some missing parentheses:
-----------------------------------------------------------------------
eval.c: In function ‘evaltree’:
eval.c:282:15: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
if (!status == isor || evalskip)
^~
eval.c:282:7: note: add parentheses around left hand side expression to silence this warning
if (!status == isor || evalskip)
^~~~~~~
( )
-----------------------------------------------------------------------
Add the parentheses to silence the warning.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enable automake silent rules to make it easier to spot compilation
problems.
Silent rules will be enabled by default, but only if they are available,
in order to keep compatibility with older autotools versions.
Prepend the silent strings also to custom rules.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Apply the changes suggested by running autoupdate on the source
repository:
1. Properly quote AC_INIT arguments.
2. Use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE. The former is
a superset of the latter, and enables more options, see
https://www.gnu.org/software/autoconf/manual/autoconf-2.60/html_node/Posix-Variants.html
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When "set -e" is enabled traps are not always executed, in particular
the EXIT trap is not executed when the shell exits on an unhandled
error.
Consider the following test script:
#!/bin/dash
set -e
trap 'ret=$?; echo "EXIT: $ret"' EXIT
trap 'exit 2' HUP INT QUIT PIPE TERM
read variable
By pressing Ctrl-C one would expect the EXIT trap to be called, as it is
the case with other shells (bash, zsh), but dash does not do it.
By calling dotrap() before jumping to the exit path when checkexit is
not zero, dash behaves like other shells.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter
expansion in multiple ways because the EXP_DISCARD flag wasn't set
or tested for various cases:
$ src/dash -c 'var=; echo ${var:+nonempty}'
nonempty
$ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}'
dash: 1: bar: parameter not set
$ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo'
barBUG
bar
$
This patch fixes them by introducing a new discard variable that
tracks whether the extra word should be discarded or not when it
is parsed.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Exiting dash via a ^D instead of with "exit" causes dash to forget to
print a newline.
sh-3.1$ sh
sh-3.1$ ^D
sh-3.1$ dash
$ sh-3.1$
It is more neat and tidy to send a newline similarly to what bash does,
so it doesn't make the next prompt of the parent shell look ugly.
Suggested by jidanni.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
[reworded the patch description]
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Bug-Debian: http://bugs.debian.org/476422
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ENOSPC as a result of an echo builting failing gives no diagnostic.
Just as other shells, dash sets $? to 1, but aside from terminating
the script, this does not inform the user what the problem is:
zsh:
% echo foo > /dev/full
echo: write error: no space left on device
bash:
$ echo foo > /dev/full
bash: echo: write error: No space left on device
dash:
$ echo foo > /dev/full
[nothing]
Print an error to stderr like the other shells.
Suggested by Roger Leigh.
Signed-off-by: Gerrit Pape <pape@smarden.org>
[reworded the patch description with information from the bug]
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Bug-Debian: http://bugs.debian.org/690473
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Don't use tempfile, as it currently runs tempnam(), which is insecure
and fails under pseudo(1).
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Ignore .deps and .dirstamp in all directories.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is automatically generated email about markup problems in a man
page for which you appear to be responsible. If you are not the right
person or list, please tell me so I can correct my database.
See http://catb.org/~esr/doclifter/bugs.html for details on how and
why these patches were generated. Feel free to email me with any
questions. Note: These patches do not change the modification date of
any manual page. You may wish to do that by hand.
I apologize if this message seems spammy or impersonal. The volume of
markup bugs I am tracking is over five hundred - there is no real
alternative to generating bugmail from a database and template.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The minus sign generated from arithmetic expansion is currently
unquoted which causes anomalies when the result is used in where
the quoting matters.
This patch fixes it by explicitly calling memtodest on the result
in cvtnum.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently growstackto will repeatedly call growstackblock until
the requisite size is obtained. This is wasteful. This patch
changes growstackblock to take a minimum size instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The variable localvar_stop is set iff vlocal is true. gcc doesn't
get this so we get a spurious warning.
This patch fixes this by always calling pushlocalvars with vlocal
and making it only actually do the push if vlocal is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently various paths will reprocess data when performing word
expansion. For example, expari will skip backwards looking for
the start of the arithmetic expansion, while evalvar will skip
unexpanded words manually.
This is cumbersome and error-prone. This patch fixes this by
making word expansions proceed in a linear fashion. This means
changing argstr and the various expansion functions such as expari
and subevalvar to return the next character to be expanded.
This is inspired by similar code from FreeBSD. However, we take
things one step further and completely remove the manual word
skipping in evalvar. This is accomplished by introducing a new
EXP_DISCARD flag that tells argstr to only parse and not produce
any actual expansions.
Incidentally, argstr will now always NUL-terminate the expansion
unless the EXP_WORD flag is set. This is because all but one
caller of argstr wants the result to be NUL-termianted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When we are trimming an unset variable in evalvar, any embedded
command substitution that should have been skipped are not. This
can cause them to be evaluated later should there be other command
substitutions in the same input word.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The function arguments syntax and quotes are both derived from
the expansion flags. As syntax is only used by memtodest we do
not need to maintain it outside of the function at all.
The only place that uses something other than BASESYNTAX or DQSYNTAX
is exptilde. However in that case DQSYNTAX has exactly the same
effect as SQSYNTAX.
This patch merges these two arguments into a single flags. The
macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order
to keep the namespace separate.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently if HOME is set to empty tilde expansion will fail, i.e.,
it will remain as a literal tilde. This patch changes it to
return the empty string as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
config.h contains settings for the cross compiler (most importantly
32/64bit versions of functions), so don't include it when calling the
native compiler to build the helpers.
Otherwise we get build errors like:
/usr/bin/gcc -include ../config.h -DBSD=1 -DSHELL -DIFS_BROKEN -g -O2 -Wall -o mkinit mkinit.c
In file included from /usr/include/sys/stat.h:107,
from /usr/include/fcntl.h:38,
from mkinit.c:50:
/usr/include/bits/stat.h:117: error: redefinition of ‘struct stat’
In file included from /usr/include/fcntl.h:38,
from mkinit.c:50:
/usr/include/sys/stat.h:504: error: redefinition of ‘stat’
/usr/include/sys/stat.h:455: note: previous definition of ‘stat’ was here
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[baruch: apply to Makefile.am; update Peter's email address]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds the test_access code from NetBSD when faccess is
unavailable. The code has been modified so that root can always
read/write any file.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds basic vfork support for the case of a simple command.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch replaces listsetvar with mklocal/setvareq. As we now
determine special built-in status prior to variable assignment, we
no longer have to do a second pass listsetvar. Instead we will
call setvareq directly instead of mklocal when necessary.
In order to do this mklocal can now take a flag in order to mark
a variable for export.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously, dash would continue to perform variable expansions
even if a redirection error occured. This patch changes it so
that it fails immediately.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|