| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
| |
We need to clear gotsigchld in waitproc because it is used as
a loop conditional for the waitcmd case. Without it waitcmd
may busy loop after a SIGCHLD.
This patch also changes gotsigchld into a volatile sig_atomic_t
to prevent compilers from optimising its accesses away.
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
| |
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
| |
There are some remaining stat/readdir calls in dash that may lead
to spurious EOVERFLOW errors on 32-bit platforms. This patch changes
them (as well as open(2)) to use the explicit large file API.
Reported-by: Tatsuki Sugiura <sugi@nemui.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After we changed the resetting of gotsigchld so that it is only
done if jp is NULL, we can now get an infinite loop in waitproc
if gotsigchld is set but there is no outstanding child because
everything had been waited for previously without gotsigchld being
zeroed.
This patch fixes it by always zeroing gotsigchld as we did before.
The bug that the previous patch was trying to fix is now resolved
by switching the blocking mode to DOWAIT_NORMAL after the specified
job has been completed so that we really do wait for all outstanding
dead children.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
| |
To make it clearer what it is doing: nonblocking wait()
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we enter a subshell we need to drop the saved redirections
as otherwise a subsequent unwindredir could produce incorrect
results.
This patch does this by simply clearing redirlist. While we
could actually free the memory underneath for subshells it isn't
really worth the trouble for now.
In order to ensure that this is done in every place where we enter
a subshell, this patch adds a new mkinit hook called forkreset.
The calls closescript, clear_traps and reset_handler are also added
to the forkreset hook.
This fixes a bug where the first two functions weren't called
if we enter a subshell without forking.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Building with clang results in some warnings about integer values being
added to strings:
-----------------------------------------------------------------------
eval.c:1138:13: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
p = " %s" + (1 - sep);
~~~~~~^~~~~~~~~~~
eval.c:1138:13: note: use array indexing to silence this warning
p = " %s" + (1 - sep);
^
& [ ]
1 warning generated.
...
jobs.c:1424:16: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
str = "\"}" + !(quoted & 1);
~~~~~~^~~~~~~~~~~~~~~
jobs.c:1424:16: note: use array indexing to silence this warning
str = "\"}" + !(quoted & 1);
^
& [ ]
1 warning generated.
-----------------------------------------------------------------------
While the code itself is fine and the warnings are indeed harmless,
fixing them also makes the semantic more explicit: what it is actually
being increased is the address which points to the start of the string
in order to skip the initial character when some conditions are met.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
| |
This patch adds basic vfork support for the case of a simple command.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
| |
Some uses of fmtstr, particularly the ones without a format string,
can be replaced with stpcpy or stpncpy. This patch does that so
we don't have to introduce unnecessary format strings in order to
silence compiler warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The gotsigchld flag is always cleared in dowait but not all callers
of dowait will wait for everything. In particular, when jp is set
we only wait until the set job isn't running anymore.
This patch fixes this by only clearing gotsigchld if jp is unset.
It also changes the waitcmd to actually set jp which corresponds
to the behaviour of bash/ksh93/mksh.
The only other caller of dowait that doesn't wait for everything
is the jobless reaper. This is in fact redundant now that we wait
after every simple command. This patch removes it.
Finally as every caller of dowait needs to wait until either the
given job is not running, or until all terminated jobs have been
processed, this patch moves the loop into dowait itself.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because of the nature of SIGCHLD, the process may have already been
waited on and therefore we must be prepared for the case that wait
may block. So ensure that it doesn't by using WNOHANG.
Furthermore, multiple jobs may have exited when gotsigchld is set.
Therefore we need to wait until there are no zombies left.
Lastly, waitforjob needs to be called with interrupts off and
the original patch broke that.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Currently dash does not reap dead children after built-in commands
or functions. This means that if you construct a loop consisting
of solely built-in commands and functions, then zombies can hang
around indefinitely.
This patch fixes this by reaping when necessary after each built-in
command and function.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This variable does not contain "sigs" (plural).
It contains either 0 or (one) signal number of a pending signal.
For someone unfamiliar with this code, "pendingsigs" name is confusing -
it hints at being an array or bit mask of pending singnals.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: dash@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When looking for a job using a string descriptor, e.g.
fg %man
the relevant loop in src/jobs.c only ever exits to the err label. With
this patch, when the end condition is reached, we check whether a job
was found, and if so, set things up to exit correctly via gotit.
Multiple matches are already caught using the test in the match block.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If job %0 is (mistakenly) specified, an out-of-bounds access to the
jobtab occurs in function getjob() if num = 0:
jp = jobtab + 0 - 1
Fix this by checking that the job number is larger than 0 before
accessing the jobtab.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On 29/07/13 23:44, Luigi Tarenga wrote:
> hi list,
> while writing a script to execute parallel ssh command on many host I found
> a strange behavior of dash. I can replicate it with a very simple script but
> didn't find any documentation about dash or POSIX that can explain it.
>
> tested on centos 6.4 (dash 0.5.5.1) and wih dash compiled from source (0.5.7)
> the following script reports error:
>
> #!/bin/dash
>
> sleep 3 &
> sleep 3 &
> sleep 3 &
> sleep 3 &
>
> #/bin/true
> jobs -l
>
> wait %1
> wait %2
> wait %3
> wait %4
>
> [vortex@lizard ~]$ ./dash-0.5.7/src/dash test.sh
> [4] + 4569 Running
> [3] - 4568 Running
> [2] 4567 Running
> [1] 4566 Running
> prova: 14: wait: No such job: %4
> [vortex@lizard ~]$ echo $?
> 2
Yes, this looks like a bug to me. The number of allocated jobs is always
kept as a multiple of four, and the first check in considering whether
the job number is valid is "if it's greater than or equal to the number
of allocated job, it's invalid". That doesn't look right. That would
only be right if jobs were zero-based, but they aren't. If it's exactly
equal to the number of available jobs, it can still be valid. It works
when adding /bin/true, because four more more jobs end up allocated
internally.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This patch improves LINENO support by storing line numbers in the parse
tree, for commands as well as for function definitions. It makes LINENO
behaves properly when calling functions, and has the added benefit of
improved line numbers in error messages when the last-parsed command is
not the last-executed one. It removes the earlier LINENO support, and
instead sets LINENO from evaltree when a command is executed
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Solaris lacks paths.h and the various _PATH_* #defines.
Check for them in configure.ac and fall back on the
usual suspects when they are missing.
- Older Solaris lacks isblank(), and versions that have it
use a macro. Check for the declaration in configure.ac
and fall back on a naive version when missing.
- Older Solaris does not support %jd (intmax_t) in format
strings, but it does support the PRIdMAX macro from inttypes.h.
Do a configure check for PRIdMAX and use it in the code.
If it doesn't exist, define it to "lld" when sizeof(long long)
equals sizeof(intmax_t) as this is more likely to work on
older systems. Otherwise, use "jd" and hope for the best.
- Older Solaris lacks stdint.h, but inttypes.h provides the
same types and works on all platforms I've tried dash on,
so just use it instead.
- Older Solaris doesn't like it when vsnprintf() is passed
a NULL buffer (in violation of the POSIX spec, of course).
Pass a 1-byte dummy buffer instead.
- Solaris lacks tempfile and mktemp programs. Fall back on a
"good-enough" custom function in mkbuiltins.
Signed-off-by: Brian Koropoff <bkoropoff@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
- AIX lacks a WCOREDUMP macro. It's just used to
append "(core dumped)" to the crash message, so
#ifdef around it.
- For some reason, the nl program on AIX defaults
to not printing line numbers ("-b n"), even though
the spec says it should default to "-b t".
Explicitly pass "-b a" for good measure in mkbuiltins.
Signed-off-by: Brian Koropoff <bkoropoff@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
| |
No point in tracing a no longer undeclared "ps->cmd", fixes:
jobs.c: In function \u2018commandtext\u2019:
jobs.c:1192: error: \u2018ps\u2019 undeclared (first use in this function)
jobs.c:1192: error: (Each undeclared identifier is reported only once
jobs.c:1192: error: for each function it appears in.)
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
| |
The sigsuspend patch broke wait by making it return after just
one job has completed. This is because we rely on pendingsigs
to signal work and never clear it until waitcmd finishes.
This patch adds a separate gotsigchld for this purpose so we
can clear it before we start waiting.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
| |
When I added savefd we may end up closing stderr if that is how
we get to the tty. This patch fixes by adding a second argument
to indicate what fd should be closed which lets jobs.c get around
the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
| |
As it stands if we fail to open /dev/tty we end up closing stderr
after saving it at a higher fd.
Thanks to David van Gorkom for reporting this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test program by Alexey Gladkov can cause dash to enter an
infinite loop in waitcmd.
#!/bin/dash
trap "echo TRAP" USR1
stub() {
echo ">>> STUB $1" >&2
sleep $1
echo "<<< STUB $1" >&2
kill -USR1 $$
}
stub 3 &
stub 2 &
until { echo "###"; wait; } do
echo "*** $?"
done
The problem is that if we get a signal after the wait3 system
call has returned but before we get to INTON in dowait, then
we can jump back up to the top and lose the exit status. So
if we then wait for the job that has just exited, then it'll
stay there forever.
I made the original change that caused this bug to fix pretty
much the same bug but in the opposite direction. That is, if
we get a signal after we enter wait3 but before we hit the kernel
then it too can cause the wait to go on forever (assuming the
child doesn't exit).
In fact this is pretty much exactly the scenario that you'll
find in glibc's documentation on pause(). The solution is given
there too, in the form of sigsuspend, which is the only way to
do the check and wait atomically.
So this patch fixes Alexey's race without reintroducing the old
bug by converting the blocking wait3 to a sigsuspend.
In order to do this we need to set a signal handler for SIGCHLD,
so the code has been modified to always do that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hi, Herbert and friends. I've created a small patch that allows dash
to be built on Mac OS X. I'm contributing it here with the hope that
it's suitable for inclusion in dash.
The changes in this patch are:
- __attribute__((__alias__())) is not supported, add an autoconf check
- open64 is not present although the stat64 family is, separate the
autoconf checks
- A syntax error had slipped into a non-glibc codepath
- mkbuiltins had a nonportable mktemp invocation for the case where
tempfile is not availalble
Nothing in this patch is actually Mac OS X-specific, so it might aid
portability to other platforms as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(Herbert: for context, see
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=467065 )
This is a real bug in upstream dash, which has existed since at
least dash-0.5.1 (July 2004). It is a latent bug in cmdtxt()
(which I think applies only to pipes) as it handles "if" commands.
The attached patch fixes it for me.
It's possible this patch will fix one or more of #462414,
#462977, and #463649. I'll send messages there to see if
the submitters can test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Because the parser does not recursively parse parameter expansion with respect
to quotes, we can't accurately determine quote status at parse time. This
patch works around this by moving the quote detection to run-time where we
do interpret it recursively.
Test case:
foo=\\
echo "<${foo#[\\]}>"
Old result:
<\>
New result:
<>
|
| |
|
|
|
|
|
| |
There are two kinds of users to copyfd, those that want to copy an fd to
an exact value and those that want to move an fd to a value >= 10. The
former can simply use dup2 directly while the latter share a lot of common
code that now constitutes savefd.
|
| |
|
|
|
|
|
|
|
| |
The existing scheme of using the native char for syntax array indicies
makes cross-compiling difficult. Therefore it makes sense to choose
one specific sign for everyone.
Since signed chars are native to most platforms and i386, it makes more
sense to use that if we are to choose one type for everyone.
|
| |
|
|
|
| |
Since nobody has compiled with JOBS turned off for quite a while, it has
bit-rotted. This patch makes it build again.
|
| |
|
|
| |
klibc doesn't have strsignal but it does have sys_siglist.
|
| |
|
|
|
|
|
|
|
|
|
| |
This change updates the BSD licence to the three-clause version since
NetBSD has already done so. This makes dash GPL-compatible.
It also adds Christos Zoulas (NetBSD ash maintainer) to the COPYING file.
I've added "copyright by Herbert Xu" to most files.
Finally all CVS IDs and inclusion of sys/cdefs.h have been removed.
The latter is needed for support of klibc.
|
| | |
|
| | |
|
| | |
|
| |
|