| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On Wed, Feb 24, 2010 at 10:23:34AM +0000, Peter Kjellerstedt wrote:
>
> there seems to be a problem with the trap implementation in dash
> (tested with 0.5.4 and 0.5.5.1). If I specify a signal which is not
> supported, the shell unconditionally aborts. E.g., I had expected
> the following to print foo (like bash and zsh do):
>
> # dash -c 'trap "echo trap executed" UNKNOWNSIGNAL || echo "foo"'
> trap: 1: UNKNOWNSIGNAL: bad trap
>
> This means I cannot write a construct like the following to take
> advantage of the ERR signal which is present in some shells:
>
> trap "echo ERR trap executed" ERR 2>/dev/null || :
>
> I also checked the POSIX documentation, and quoting from
> http://www.opengroup.org/onlinepubs/009695399/utilities/trap.html
> (exit status): "For both interactive and non-interactive shells,
> invalid signal names [XSI] [Option Start] or numbers [Option End]
> shall not be considered a syntax error and do not cause the shell
> to abort."
This patch replaces sh_error with a outfmt + return 1 in trapcmd
so that these errors are no longer fatal.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes the case where the eval command is used with
set -e and as part of a construct that should not cause the
shell to abort, e.g., as part of the condition of an if statement.
This is achieved by propagating the EV_TESTED flag into the
evalstring function through evalcmd. As this alters the prototype
of evalcmd it is now invoked explicitly by evalbltin. The built-in
infrastructure has been changed to accomodate this special case.
In order to ensure that the EXIT trap is properly executed this
patch clears evalskip in exitshell. This wasn't needed before
because of the broken way evalstring worked where it always clears
evalskip when called by minusc.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
| |
Now that waitcmd no longer uses EXSIG we can remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test program by Alexey Gladkov can cause dash to enter an
infinite loop in waitcmd.
#!/bin/dash
trap "echo TRAP" USR1
stub() {
echo ">>> STUB $1" >&2
sleep $1
echo "<<< STUB $1" >&2
kill -USR1 $$
}
stub 3 &
stub 2 &
until { echo "###"; wait; } do
echo "*** $?"
done
The problem is that if we get a signal after the wait3 system
call has returned but before we get to INTON in dowait, then
we can jump back up to the top and lose the exit status. So
if we then wait for the job that has just exited, then it'll
stay there forever.
I made the original change that caused this bug to fix pretty
much the same bug but in the opposite direction. That is, if
we get a signal after we enter wait3 but before we hit the kernel
then it too can cause the wait to go on forever (assuming the
child doesn't exit).
In fact this is pretty much exactly the scenario that you'll
find in glibc's documentation on pause(). The solution is given
there too, in the form of sigsuspend, which is the only way to
do the check and wait atomically.
So this patch fixes Alexey's race without reintroducing the old
bug by converting the blocking wait3 to a sigsuspend.
In order to do this we need to set a signal handler for SIGCHLD,
so the code has been modified to always do that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
| |
|
|
|
|
| |
We need to flush at the very end in case we've generated any errors
before that. The flushall call cannot perform a longjmp so it's
safe there.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On Thu, Jun 07, 2007 at 12:20:27PM +0200, Denis Vlasenko wrote:
>
> When I start dash under Midnight Commander and then type 'exit', dash
> exits all right, but then MC is sent to background. It happens because
> dash does not restore current process group on exit.
>
> Attached patch fixes this. It also fixes another bug: setjobctl(0)
> must ignore tcsetpgrp errors, because there are cases when tty is
> destroyed under dash.
>
> Patch is run-tested.
I've fixed this slightly differently so that we don't need the
xtcsetpgrp change.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On Tue, Jan 10, 2006 at 10:56:23AM +0000, Gerrit Pape wrote:
> tags 347232 + patch
> quit
>
> On Mon, Jan 09, 2006 at 04:29:19PM +0100, Marco Nenciarini wrote:
> > The problem is here:
> >
> > # Set the kernel 2.6 option only for fresh install
> > test -z "$(GetMenuOpt "kopt" "")" && kopt_2_6="root=$root_device_2_6 ro"
> >
> > # Extract options for specific kernels
> > eval $(ExtractMenuOpts "\(kopt_[a-zA-Z0-9_]\+\)")
> >
> > If the first test fails and the eval argument is empty then dash
> > terminate with exitcode 1.
>
> > This is a simple testcase:
> > tm:~# bash -c "set -e ;/bin/false && : ; eval ''; echo 'END'"; echo $?
> > END
> > 0
> > tm:~# dash -c "set -e ;/bin/false && : ; eval ''; echo 'END'"; echo $?
> > 1
> >
> > if you insert any command with successfull exit status before the
> > empty eval, all work ok:
> > tm:~# bash -c "set -e ;/bin/false && : ; : ; eval ''; echo 'END'"; echo $?
> > END
> > 0
> > tm:~# dash -c "set -e ;/bin/false && : ; : ; eval ''; echo 'END'"; echo $?
> > END
> > 0
>
> Yes, I can confirm this is a bug in dash. The standard says
>
> EXIT STATUS
>
> If there are no arguments, or only null arguments, eval shall
> return a zero exit status; otherwise, it shall return the exit
> status of the command defined by the string of concatenated
> arguments separated by <space>s.
>
> Hi Herbert, please see http://bugs.debian.org/347232
Changed evalstring to return the exit status instead of evalskip. This
allows us to return zero if the string is empty.
|
| |
|
|
|
|
|
|
|
|
|
| |
This change updates the BSD licence to the three-clause version since
NetBSD has already done so. This makes dash GPL-compatible.
It also adds Christos Zoulas (NetBSD ash maintainer) to the COPYING file.
I've added "copyright by Herbert Xu" to most files.
Finally all CVS IDs and inclusion of sys/cdefs.h have been removed.
The latter is needed for support of klibc.
|
| |
|
|
|
|
| |
Let evaltree handle traps from cmdloop.
Reset evalskip after minusc is executed.
Stop executing traps once SKIPEVAL is seen.
|
| | |
|
| | |
|
| |
|