summary refs log tree commit diff
path: root/www/git.causal.agency/cgit/ui-clone.h
diff options
context:
space:
mode:
authorJune McEnroe <june@causal.agency>2021-02-23 13:12:05 -0500
committerJune McEnroe <june@causal.agency>2021-02-23 13:12:40 -0500
commit7c54e1d5859238d8d58e91ebe7fcc2e3377eab54 (patch)
tree7d9f706e5afc24cc8b9c8baba7ae14ebd931b460 /www/git.causal.agency/cgit/ui-clone.h
parentPublish "Operating systems" (diff)
downloadsrc-7c54e1d5859238d8d58e91ebe7fcc2e3377eab54.tar.gz
src-7c54e1d5859238d8d58e91ebe7fcc2e3377eab54.zip
Switch to Go Mono on OpenBSD
Luxi's uncrossed zero is just too bad. Oh and lower case l is also
better in Go.
Diffstat (limited to '')
0 files changed, 0 insertions, 0 deletions
 

generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-06 09:24:09 +0000


 


igned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25readme: Accept multiple candidates and test them.Jason A. Donenfeld

The readme variable may now contain multiple space deliminated entries,
which per usual are either a filepath or a git ref filepath. If multiple
are specified, cgit will now select the first one in the list that
exists. This is to make it easier to specify multiple default readme
types in the main cgitrc file and have them automatically get applied to
each repo based on what exists.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25ui-summary: Pass filename to about-filterJason A. Donenfeld

This gives the about-filter API the same semantics as source-filter,
where the filter receives the filename so it can decide what to do next
with it.

While we're at it, plug a memory leak.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25ui-summary: Use default branch for readme if : prefixJason A. Donenfeld

If the readme value begins with ":", and has no specified branch before
it, use the repository's default branch.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25cgit.c: Do not reset HOME after unsetting it.Jason A. Donenfeld

The number of odd cases in which git will try to read config is far too
great to keep putting a bandaid over each one, so we'll just unset it.

If it turns out that scripts really liked to know about $HOME, we can
always reset it in the filter forks.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25cgit.c: sync repo config printing with struct cgit_repoJason A. Donenfeld

We've now added quite a few config keys for repositories, but we've
forgotten to update the printing of it for cache files. Synchronize the
two.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-05-25git: update to 1.8.3John Keeping

No changes required, just bump the submodule and Makefile versions.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22cache.c: cache ls_cache output properlyJohn Keeping

By using the standard library's printf, cache_ls does not redirect its
output to the cache when we change the process' stdout file descriptor
to point to the cache file.  Fix this by using "htmlf" in the same way
that we do for writing HTTP headers.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22tests: introduce strip_header() helper functionJohn Keeping

This means that we can avoid hardcoding the number of headers we expect
CGit to generate in test cases and simply remove whatever headers happen
to by there when we are checking body content.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22shared.c: use die_errno() where appropriateJohn Keeping

This replaces some code that is re-implementing die_errno by just
calling the function.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22html.c: die when write failsJohn Keeping

If we fail to write HTML output once, there's no point carrying on so
just write a failure message once and die.  By using Git's die_errno
function we also let the user know in what way the write failed.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22ui-log: add <span/> around commit decorationsJohn Keeping

This helps projects that have a large number of tags to display them all
using custom CSS.

The default stylesheet has not been updated since what is useful for
projects with a lot of tags is not the same as what is useful for
projects with only a small number of decorations per commit.

Suggested-by: Konstantin Ryabitsev <mricon@kernel.org>
Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-22Makefile: fix parallel "make test"John Keeping

When building the "test" target we depend on both cgit and building the
Git tools.  By doing this with two targets we end up running make in the
git/ directory twice, concurrently if using parallel make, which causes
us to build more than we need and potentially builds incorrectly if
multi-step build-then-move operations overlap.

Fix this by instead calling back into the makefile so that we alter the
"cgit" target to also build the Git tools.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-18cache.c: fix cache_lsJohn Keeping

Commit fb3655d (use struct strbuf instead of static buffers, 2013-04-06)
broke the logic in cache.c::cache_ls by failing to set slot->cache_name
before calling open_slot.

While fixing this, also free the strbufs added by that commit once we're
done with them.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-13t0109: "function" is a bash-ismJohn Keeping

We try to stick to POSIX shell in the tests but a "function" keyword has
found its way into t0109.  Remove it.

This makes the tests work with dash again.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-05-13New mailing list.Jason A. Donenfeld


2013-04-30ui-snapshot: do not access $HOMEJason A. Donenfeld

It's a bit tedious to have to do this here too. If we encounter other
issues with $HOME down the line, I'll look into adding some nice utility
functions to handle this, or perhaps giving up on the hope that we could
keep $HOME defined for scripts.

This commit additionally adds a test case, should the issue surface
again.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-04-27t0001: validate Git -rcN version numbers correctlyJohn Keeping

When creating the GIT-VERSION-FILE that we use to test that the version
of Git in git/ is the same as in the CGit Makefile, Git applies the
transform "s/-/./g" to the version string.  This doesn't affect released
versions but does change RC version numbers such as 1.8.3-rc0.

While CGit should only refer to a released Git version in general, it is
useful to developers who want to test upcoming Git releases if the tests
do work with RCs, so change t0001 to apply the same transform to our
Makefile version before comparing it to the contents of
GIT-VERSION-FILE.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-27git: update to 1.8.2.2John Keeping

No changes required, just bump the submodule and Makefile version.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-17scan-tree: fix regression in section-from-path=-1John Keeping

Commit fb3655d (use struct strbuf instead of static buffers -
2013-04-06) introduced a regression in the "section-from-path" handling
when the configured value is negative.  By changing the "rel" variable
so that it includes a trailing slash, counting slashes from the end of
the string no longer gives the same answer as it did before.

Fix this by ensuring that "rel" does not have a trailing slash.

Reported-by: Julius Plenz <plenz@cis.fu-berlin.de>
Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-15t0001: ignore ".dirty" suffix on Git versionJohn Keeping

When testing modifications in Git that affect CGit, it is annoying to
have t0001 failing simply because the Git version has a ".dirty" suffix
when the version of Git there does indeed match that specified in the
CGit makefile.  Stop this by stripping the ".dirty" suffix from the
GIT_VERSION variable.

Note that this brings the "Git version" behaviour in line with the
"submodule version" case which does not check if the working tree in
git/ is modified.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-15tests: set TEST_OUTPUT_DIRECTORY to the CGit test directoryJohn Keeping

By default, Git's test suite puts the trash directories and test-results
directory into its own directory, not that containing the tests being
run.  This is less convenient for inspecting test failures, so set the
output directory to CGit's tests/ directory instead.

Note that there is currently a bug in Git whereby it will create the
trash directories in our tests/ directory regardless of the value of
TEST_OUTPUT_DIRECTORY, and then fail to remove them once the tests are
done.  This change does currently affect the location of the
test-results/ directory though.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-15t0109: test more URLsJohn Keeping

In order to ensure that we don't access $HOME at some point after
initial startup when rendering a specific view, run the strace test on a
range of different pages.

This ensures that we don't end up reading a configuration later for some
specific view.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-10cgitrc.5.txt: Specify when scan-path must be defined before.Jason A. Donenfeld

Several options must be specified prior to scan-path. This is consistant
source of user confusion. Document these facts.

Suggested-by: Lukas Fleischer <cgit@cryptocrack.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2013-04-10ui-snapshot.c: Prepend "V" when guessing ref namesLukas Fleischer

In cgit_print_snapshot_links() we strip leading "v" and "V", while we
currently only prepend a lower case "v" when parsing a snapshot file
name. This results in broken snapshot links for tags that start with an
upper case "V". Avoid this by prepending a "V" as a fallback.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>



2013-04-10t0107: Skip ZIP tests if unzip(1) isn't availableLukas Fleischer

Note that we cannot use skip_all here since some tests have already been
executed when ZIP tests are reached. Use test prerequisites to skip
everything using unzip(1) if the binary is not available instead.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>



2013-04-10tests/: Do not use `sed -i`Lukas Fleischer

"-i" isn't part of the POSIX standard and doesn't work on several
platforms such as OpenBSD. Use a temporary file instead.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>



2013-04-10Add branch-sort and repo.branch-sort options.Jason A. Donenfeld

When set to "name", branches are sorted by name, which is the current
default. When set to "age", branches are sorted by the age of the
repository.

This feature was requested by Konstantin Ryabitsev for use on
kernel.org.

Proposed-by: Konstantin Ryabitsev <mricon@kernel.org>



2013-04-10t0109: chain operations with &&John Keeping

Without '&&' between operations, we will not detect if strace or cgit
exit with an error status, which would cause a false positive test
status in this case.

Signed-off-by: John Keeping <john@keeping.me.uk>



2013-04-10cgit.c: Do not restore unset environment variablesLukas Fleischer

getenv() returns a NULL pointer if the specified variable name cannot be
found in the environment. However, some setenv() implementations crash
if a NULL pointer is passed as second argument. Only restore variables
that are not NULL.

See commit d96d2c98ebc4c2d3765f5b35c4142e0e828a421b for a related patch.

Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>



2013-04-09t0107: Use `tar -z` for gzip'ed archivesLukas Fleischer