diff options
Diffstat (limited to '')
64 files changed, 0 insertions, 24038 deletions
diff --git a/bin/1sh/1sh-kill.1 b/bin/1sh/1sh-kill.1 deleted file mode 100644 index b8fef5ff..00000000 --- a/bin/1sh/1sh-kill.1 +++ /dev/null @@ -1,157 +0,0 @@ -.\"- -.\" Copyright (c) 1980, 1990, 1993 -.\" The Regents of the University of California. All rights reserved. -.\" -.\" This code is derived from software contributed to Berkeley by -.\" the Institute of Electrical and Electronics Engineers, Inc. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. Neither the name of the University nor the names of its contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" @(#)kill.1 8.2 (Berkeley) 4/28/95 -.\" $FreeBSD: releng/12.0/bin/kill/kill.1 314436 2017-02-28 23:42:47Z imp $ -.\" -.Dd October 3, 2016 -.Dt 1SH-KILL 1 -.Os -.Sh NAME -.Nm kill -.Nd terminate or signal a process -.Sh SYNOPSIS -.Nm -.Op Fl s Ar signal_name -.Ar pid ... -.Nm -.Fl l -.Op Ar exit_status -.Nm -.Fl Ar signal_name -.Ar pid ... -.Nm -.Fl Ar signal_number -.Ar pid ... -.Sh DESCRIPTION -The -.Nm -utility sends a signal to the processes specified by the -.Ar pid -operands. -.Pp -Only the super-user may send signals to other users' processes. -.Pp -The options are as follows: -.Bl -tag -width indent -.It Fl s Ar signal_name -A symbolic signal name specifying the signal to be sent instead of the -default -.Dv TERM . -.It Fl l Op Ar exit_status -If no operand is given, list the signal names; otherwise, write -the signal name corresponding to -.Ar exit_status . -.It Fl Ar signal_name -A symbolic signal name specifying the signal to be sent instead of the -default -.Dv TERM . -.It Fl Ar signal_number -A non-negative decimal integer, specifying the signal to be sent instead -of the default -.Dv TERM . -.El -.Pp -The following PIDs have special meanings: -.Bl -tag -width indent -.It -1 -If superuser, broadcast the signal to all processes; otherwise broadcast -to all processes belonging to the user. -.El -.Pp -Some of the more commonly used signals: -.Pp -.Bl -tag -width indent -compact -.It 1 -HUP (hang up) -.It 2 -INT (interrupt) -.It 3 -QUIT (quit) -.It 6 -ABRT (abort) -.It 9 -KILL (non-catchable, non-ignorable kill) -.It 14 -ALRM (alarm clock) -.It 15 -TERM (software termination signal) -.El -.Pp -Some shells may provide a builtin -.Nm -command which is similar or identical to this utility. -Consult the -.Xr builtin 1 -manual page. -.Sh EXIT STATUS -.Ex -std -.Sh EXAMPLES -Terminate -the processes with PIDs 142 and 157: -.Pp -.Dl "kill 142 157" -.Pp -Send the hangup signal -.Pq Dv SIGHUP -to the process with PID 507: -.Pp -.Dl "kill -s HUP 507" -.Pp -Terminate the process group with PGID 117: -.Pp -.Dl "kill -- -117" -.Sh SEE ALSO -.Xr builtin 1 , -.Xr csh 1 , -.Xr killall 1 , -.Xr ps 1 , -.Xr sh 1 , -.Xr kill 2 , -.Xr sigaction 2 -.Sh STANDARDS -The -.Nm -utility is expected to be -.St -p1003.2 -compatible. -.Sh HISTORY -A -.Nm -command appeared in -.At v3 -in section 8 of the manual. -.Sh BUGS -A replacement for the command -.Dq Li kill 0 -for -.Xr csh 1 -users should be provided. diff --git a/bin/1sh/1sh-printf.1 b/bin/1sh/1sh-printf.1 deleted file mode 100644 index 8ef04674..00000000 --- a/bin/1sh/1sh-printf.1 +++ /dev/null @@ -1,382 +0,0 @@ -.\" Copyright (c) 1989, 1990, 1993 -.\" The Regents of the University of California. All rights reserved. -.\" -.\" This code is derived from software contributed to Berkeley by -.\" the Institute of Electrical and Electronics Engineers, Inc. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. Neither the name of the University nor the names of its contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" @(#)printf.1 8.1 (Berkeley) 6/6/93 -.\" $FreeBSD: releng/12.0/usr.bin/printf/printf.1 314436 2017-02-28 23:42:47Z imp $ -.\" -.Dd April 21, 2014 -.Dt 1SH-PRINTF 1 -.Os -.Sh NAME -.Nm printf -.Nd formatted output -.Sh SYNOPSIS -.Nm -.Ar format Op Ar arguments ... -.Sh DESCRIPTION -The -.Nm -utility formats and prints its arguments, after the first, under control -of the -.Ar format . -The -.Ar format -is a character string which contains three types of objects: plain characters, -which are simply copied to standard output, character escape sequences which -are converted and copied to the standard output, and format specifications, -each of which causes printing of the next successive -.Ar argument . -.Pp -The -.Ar arguments -after the first are treated as strings if the corresponding format is -either -.Cm c , b -or -.Cm s ; -otherwise it is evaluated as a C constant, with the following extensions: -.Pp -.Bl -bullet -offset indent -compact -.It -A leading plus or minus sign is allowed. -.It -If the leading character is a single or double quote, the value is the -character code of the next character. -.El -.Pp -The format string is reused as often as necessary to satisfy the -.Ar arguments . -Any extra format specifications are evaluated with zero or the null -string. -.Pp -Character escape sequences are in backslash notation as defined in the -.St -ansiC , -with extensions. -The characters and their meanings -are as follows: -.Pp -.Bl -tag -width Ds -offset indent -compact -.It Cm \ea -Write a <bell> character. -.It Cm \eb -Write a <backspace> character. -.It Cm \ec -Ignore remaining characters in this string. -.It Cm \ef -Write a <form-feed> character. -.It Cm \en -Write a <new-line> character. -.It Cm \er -Write a <carriage return> character. -.It Cm \et -Write a <tab> character. -.It Cm \ev -Write a <vertical tab> character. -.It Cm \e\' -Write a <single quote> character. -.It Cm \e\e -Write a backslash character. -.It Cm \e Ns Ar num -Write a byte whose -value is the 1-, 2-, or 3-digit -octal number -.Ar num . -Multibyte characters can be constructed using multiple -.Cm \e Ns Ar num -sequences. -.El -.Pp -Each format specification is introduced by the percent character -(``%''). -The remainder of the format specification includes, -in the following order: -.Bl -tag -width Ds -.It "Zero or more of the following flags:" -.Bl -tag -width Ds -.It Cm # -A `#' character -specifying that the value should be printed in an ``alternate form''. -For -.Cm b , c , d , s -and -.Cm u -formats, this option has no effect. -For the -.Cm o -formats the precision of the number is increased to force the first -character of the output string to a zero. -For the -.Cm x -.Pq Cm X -format, a non-zero result has the string -.Li 0x -.Pq Li 0X -prepended to it. -For -.Cm a , A , e , E , f , F , g -and -.Cm G -formats, the result will always contain a decimal point, even if no -digits follow the point (normally, a decimal point only appears in the -results of those formats if a digit follows the decimal point). -For -.Cm g -and -.Cm G -formats, trailing zeros are not removed from the result as they -would otherwise be; -.It Cm \&\- -A minus sign `\-' which specifies -.Em left adjustment -of the output in the indicated field; -.It Cm \&+ -A `+' character specifying that there should always be -a sign placed before the number when using signed formats. -.It Sq \&\ \& -A space specifying that a blank should be left before a positive number -for a signed format. -A `+' overrides a space if both are used; -.It Cm \&0 -A zero `0' character indicating that zero-padding should be used -rather than blank-padding. -A `\-' overrides a `0' if both are used; -.El -.It "Field Width:" -An optional digit string specifying a -.Em field width ; -if the output string has fewer bytes than the field width it will -be blank-padded on the left (or right, if the left-adjustment indicator -has been given) to make up the field width (note that a leading zero -is a flag, but an embedded zero is part of a field width); -.It Precision: -An optional period, -.Sq Cm \&.\& , -followed by an optional digit string giving a -.Em precision -which specifies the number of digits to appear after the decimal point, -for -.Cm e -and -.Cm f -formats, or the maximum number of bytes to be printed -from a string; if the digit string is missing, the precision is treated -as zero; -.It Format: -A character which indicates the type of format to use (one of -.Cm diouxXfFeEgGaAcsb ) . -The uppercase formats differ from their lowercase counterparts only in -that the output of the former is entirely in uppercase. -The floating-point format specifiers -.Pq Cm fFeEgGaA -may be prefixed by an -.Cm L -to request that additional precision be used, if available. -.El -.Pp -A field width or precision may be -.Sq Cm \&* -instead of a digit string. -In this case an -.Ar argument -supplies the field width or precision. -.Pp -The format characters and their meanings are: -.Bl -tag -width Fl -.It Cm diouXx -The -.Ar argument -is printed as a signed decimal (d or i), unsigned octal, unsigned decimal, -or unsigned hexadecimal (X or x), respectively. -.It Cm fF -The -.Ar argument -is printed in the style `[\-]ddd.ddd' where the number of d's -after the decimal point is equal to the precision specification for -the argument. -If the precision is missing, 6 digits are given; if the precision -is explicitly 0, no digits and no decimal point are printed. -The values \*[If] and \*[Na] are printed as -.Ql inf -and -.Ql nan , -respectively. -.It Cm eE -The -.Ar argument -is printed in the style -.Cm e -.Sm off -.Sq Op - Ar d.ddd No \(+- Ar dd -.Sm on -where there -is one digit before the decimal point and the number after is equal to -the precision specification for the argument; when the precision is -missing, 6 digits are produced. -The values \*[If] and \*[Na] are printed as -.Ql inf -and -.Ql nan , -respectively. -.It Cm gG -The -.Ar argument -is printed in style -.Cm f -.Pq Cm F -or in style -.Cm e -.Pq Cm E -whichever gives full precision in minimum space. -.It Cm aA -The -.Ar argument -is printed in style -.Sm off -.Sq Op - Ar h.hhh No \(+- Li p Ar d -.Sm on -where there is one digit before the hexadecimal point and the number -after is equal to the precision specification for the argument; -when the precision is missing, enough digits are produced to convey -the argument's exact double-precision floating-point representation. -The values \*[If] and \*[Na] are printed as -.Ql inf -and -.Ql nan , -respectively. -.It Cm c -The first byte of -.Ar argument -is printed. -.It Cm s -Bytes from the string -.Ar argument -are printed until the end is reached or until the number of bytes -indicated by the precision specification is reached; however if the -precision is 0 or missing, the string is printed entirely. -.It Cm b -As for -.Cm s , -but interpret character escapes in backslash notation in the string -.Ar argument . -The permitted escape sequences are slightly different in that -octal escapes are -.Cm \e0 Ns Ar num -instead of -.Cm \e Ns Ar num . -.It Cm n$ -Allows reordering of the output according to -.Ar argument . -.It Cm \&% -Print a `%'; no argument is used. -.El -.Pp -The decimal point -character is defined in the program's locale (category -.Dv LC_NUMERIC ) . -.Pp -In no case does a non-existent or small field width cause truncation of -a field; padding takes place only if the specified field width exceeds -the actual width. -.Pp -Some shells may provide a builtin -.Nm -command which is similar or identical to this utility. -Consult the -.Xr builtin 1 -manual page. -.Sh EXIT STATUS -.Ex -std -.Sh COMPATIBILITY -The traditional -.Bx -behavior of converting arguments of numeric formats not beginning -with a digit to the -.Tn ASCII -code of the first character is not supported. -.Sh SEE ALSO -.Xr builtin 1 , -.Xr echo 1 , -.Xr sh 1 , -.Xr printf 3 -.Sh STANDARDS -The -.Nm -command is expected to be compatible with the -.St -p1003.2 -specification. -.Sh HISTORY -The -.Nm -command appeared in -.Bx 4.3 Reno . -It is modeled -after the standard library function, -.Xr printf 3 . -.Sh CAVEATS -.Tn ANSI -hexadecimal character constants were deliberately not provided. -.Pp -Trying to print a dash ("-") as the first character causes -.Nm -to interpret the dash as a program argument. -.Nm -- -must be used before -.Ar format . -.Pp -If the locale contains multibyte characters -(such as UTF-8), -the -.Cm c -format and -.Cm b -and -.Cm s -formats with a precision -may not operate as expected. -.Sh BUGS -Since the floating point numbers are translated from -.Tn ASCII -to floating-point and -then back again, floating-point precision may be lost. -(By default, the number is translated to an IEEE-754 double-precision -value before being printed. -The -.Cm L -modifier may produce additional precision, depending on the hardware platform.) -.Pp -The escape sequence \e000 is the string terminator. -When present in the argument for the -.Cm b -format, the argument will be truncated at the \e000 character. -.Pp -Multibyte characters are not recognized in format strings (this is only -a problem if -.Ql % -can appear inside a multibyte character). diff --git a/bin/1sh/1sh-test.1 b/bin/1sh/1sh-test.1 deleted file mode 100644 index 78cd75f9..00000000 --- a/bin/1sh/1sh-test.1 +++ /dev/null @@ -1,395 +0,0 @@ -.\"- -.\" Copyright (c) 1991, 1993 -.\" The Regents of the University of California. All rights reserved. -.\" -.\" This code is derived from software contributed to Berkeley by -.\" the Institute of Electrical and Electronics Engineers, Inc. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. Neither the name of the University nor the names of its contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" @(#)test.1 8.1 (Berkeley) 5/31/93 -.\" $FreeBSD: releng/12.0/bin/test/test.1 314436 2017-02-28 23:42:47Z imp $ -.\" -.Dd October 5, 2016 -.Dt 1SH-TEST 1 -.Os -.Sh NAME -.Nm test , -.Nm \&[ -.Nd condition evaluation utility -.Sh SYNOPSIS -.Nm -.Ar expression -.Nm \&[ -.Ar expression Cm \&] -.Sh DESCRIPTION -The -.Nm -utility evaluates the expression and, if it evaluates -to true, returns a zero (true) exit status; otherwise -it returns 1 (false). -If there is no expression, -.Nm -also -returns 1 (false). -.Pp -All operators and flags are separate arguments to the -.Nm -utility. -.Pp -The following primaries are used to construct expression: -.Bl -tag -width Ar -.It Fl b Ar file -True if -.Ar file -exists and is a block special -file. -.It Fl c Ar file -True if -.Ar file -exists and is a character -special file. -.It Fl d Ar file -True if -.Ar file -exists and is a directory. -.It Fl e Ar file -True if -.Ar file -exists (regardless of type). -.It Fl f Ar file -True if -.Ar file -exists and is a regular file. -.It Fl g Ar file -True if -.Ar file -exists and its set group ID flag -is set. -.It Fl h Ar file -True if -.Ar file -exists and is a symbolic link. -This operator is retained for compatibility with previous versions of -this program. -Do not rely on its existence; use -.Fl L -instead. -.It Fl k Ar file -True if -.Ar file -exists and its sticky bit is set. -.It Fl n Ar string -True if the length of -.Ar string -is nonzero. -.It Fl p Ar file -True if -.Ar file -is a named pipe -.Pq Tn FIFO . -.It Fl r Ar file -True if -.Ar file -exists and is readable. -.It Fl s Ar file -True if -.Ar file -exists and has a size greater -than zero. -.It Fl t Ar file_descriptor -True if the file whose file descriptor number -is -.Ar file_descriptor -is open and is associated with a terminal. -.It Fl u Ar file -True if -.Ar file -exists and its set user ID flag -is set. -.It Fl w Ar file -True if -.Ar file -exists and is writable. -True -indicates only that the write flag is on. -The file is not writable on a read-only file -system even if this test indicates true. -.It Fl x Ar file -True if -.Ar file -exists and is executable. -True -indicates only that the execute flag is on. -If -.Ar file -is a directory, true indicates that -.Ar file -can be searched. -.It Fl z Ar string -True if the length of -.Ar string -is zero. -.It Fl L Ar file -True if -.Ar file -exists and is a symbolic link. -.It Fl O Ar file -True if -.Ar file -exists and its owner matches the effective user id of this process. -.It Fl G Ar file -True if -.Ar file -exists and its group matches the effective group id of this process. -.It Fl S Ar file -True if -.Ar file -exists and is a socket. -.It Ar file1 Fl nt Ar file2 -True if -.Ar file1 -exists and is newer than -.Ar file2 . -.It Ar file1 Fl ot Ar file2 -True if -.Ar file1 -exists and is older than -.Ar file2 . -.It Ar file1 Fl ef Ar file2 -True if -.Ar file1 -and -.Ar file2 -exist and refer to the same file. -.It Ar string -True if -.Ar string -is not the null -string. -.It Ar s1 Cm = Ar s2 -True if the strings -.Ar s1 -and -.Ar s2 -are identical. -.It Ar s1 Cm != Ar s2 -True if the strings -.Ar s1 -and -.Ar s2 -are not identical. -.It Ar s1 Cm < Ar s2 -True if string -.Ar s1 -comes before -.Ar s2 -based on the binary value of their characters. -.It Ar s1 Cm > Ar s2 -True if string -.Ar s1 -comes after -.Ar s2 -based on the binary value of their characters. -.It Ar n1 Fl eq Ar n2 -True if the integers -.Ar n1 -and -.Ar n2 -are algebraically -equal. -.It Ar n1 Fl ne Ar n2 -True if the integers -.Ar n1 -and -.Ar n2 -are not -algebraically equal. -.It Ar n1 Fl gt Ar n2 -True if the integer -.Ar n1 -is algebraically -greater than the integer -.Ar n2 . -.It Ar n1 Fl ge Ar n2 -True if the integer -.Ar n1 -is algebraically -greater than or equal to the integer -.Ar n2 . -.It Ar n1 Fl lt Ar n2 -True if the integer -.Ar n1 -is algebraically less -than the integer -.Ar n2 . -.It Ar n1 Fl le Ar n2 -True if the integer -.Ar n1 -is algebraically less -than or equal to the integer -.Ar n2 . -.El -.Pp -If -.Ar file -is a symbolic link, -.Nm -will fully dereference it and then evaluate the expression -against the file referenced, except for the -.Fl h -and -.Fl L -primaries. -.Pp -These primaries can be combined with the following operators: -.Bl -tag -width Ar -.It Cm \&! Ar expression -True if -.Ar expression -is false. -.It Ar expression1 Fl a Ar expression2 -True if both -.Ar expression1 -and -.Ar expression2 -are true. -.It Ar expression1 Fl o Ar expression2 -True if either -.Ar expression1 -or -.Ar expression2 -are true. -.It Cm \&( Ar expression Cm \&) -True if expression is true. -.El -.Pp -The -.Fl a -operator has higher precedence than the -.Fl o -operator. -.Pp -Some shells may provide a builtin -.Nm -command which is similar or identical to this utility. -Consult the -.Xr builtin 1 -manual page. -.Sh GRAMMAR AMBIGUITY -The -.Nm -grammar is inherently ambiguous. -In order to assure a degree of consistency, -the cases described in the -.St -p1003.2 , -section D11.2/4.62.4, standard -are evaluated consistently according to the rules specified in the -standards document. -All other cases are subject to the ambiguity in the -command semantics. -.Pp -In particular, only expressions containing -.Fl a , -.Fl o , -.Cm \&( -or -.Cm \&) -can be ambiguous. -.Sh EXIT STATUS -The -.Nm -utility exits with one of the following values: -.Bl -tag -width indent -.It 0 -expression evaluated to true. -.It 1 -expression evaluated to false or expression was -missing. -.It >1 -An error occurred. -.El -.Sh EXAMPLES -Implement -.Li test FILE1 -nt FILE2 -using only -.Tn POSIX -functionality: -.Pp -.Dl test -n \&"$(find -L -- FILE1 -prune -newer FILE2 2>/dev/null)\&" -.Pp -This can be modified using non-standard -.Xr find 1 -primaries like -.Cm -newerca -to compare other timestamps. -.Sh COMPATIBILITY -For compatibility with some other implementations, -the -.Cm = -primary can be substituted with -.Cm == -with the same meaning. -.Sh SEE ALSO -.Xr builtin 1 , -.Xr expr 1 , -.Xr find 1 , -.Xr sh 1 , -.Xr stat 1 , -.Xr symlink 7 -.Sh STANDARDS -The -.Nm -utility implements a superset of the -.St -p1003.2 -specification. -The primaries -.Cm < , -.Cm == , -.Cm > , -.Fl ef , -.Fl nt , -.Fl ot , -.Fl G , -and -.Fl O -are extensions. -.Sh HISTORY -A -.Nm -utility appeared in -.At v7 . -.Sh BUGS -Both sides are always evaluated in -.Fl a -and -.Fl o . -For instance, the writable status of -.Pa file -will be tested by the following command even though the former expression -indicated false, which results in a gratuitous access to the file system: -.Dl "[ -z abc -a -w file ]" -To avoid this, write -.Dl "[ -z abc ] && [ -w file ]" diff --git a/bin/1sh/1sh.1 b/bin/1sh/1sh.1 deleted file mode 100644 index 468b6925..00000000 --- a/bin/1sh/1sh.1 +++ /dev/null @@ -1,3257 +0,0 @@ -.\"- -.\" Copyright (c) 1991, 1993 -.\" The Regents of the University of California. All rights reserved. -.\" -.\" This code is derived from software contributed to Berkeley by -.\" Kenneth Almquist. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. Neither the name of the University nor the names of its contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -.\" SUCH DAMAGE. -.\" -.\" from: @(#)sh.1 8.6 (Berkeley) 5/4/95 -.\" $FreeBSD: releng/12.0/bin/sh/sh.1 336483 2018-07-19 13:09:29Z 0mp $ -. -.Dd November 26, 2019 -.Dt 1SH 1 -.Os -. -.Sh NAME -.Nm 1sh -.Nd a (one) shell -. -.Sh SYNOPSIS -.Nm -.Op Fl /+abCEefhIimnPpTuVvx -.Op Fl /+o Ar longname -.Oo -.Ar script -.Op Ar arg ... -.Oc -. -.Nm -.Op Fl /+abCEefhIimnPpTuVvx -.Op Fl /+o Ar longname -.Fl c Ar string -.Oo -.Ar name -.Op Ar arg ... -.Oc -. -.Nm -.Op Fl /+abCEefhIimnPpTuVvx -.Op Fl /+o Ar longname -.Fl s -.Op Ar arg ... -. -.Sh DESCRIPTION -The -.Nm -utility is a command interpreter. -The current version of -.Nm -is close to the -.St -p1003.1 -specification for the shell. -It only supports features -designated by POSIX, -plus a few Berkeley extensions. -This man page is not intended to be a tutorial nor a complete -specification of the shell. -. -.Ss Overview -The shell is a command that reads lines from -either a file or the terminal, interprets them, and -generally executes other commands. -It is the program that is started when a user logs into the system, -although a user can select a different shell with the -.Xr chsh 1 -command. -The shell -implements a language that has flow control constructs, -a macro facility that provides a variety of features in -addition to data storage, along with built-in history and line -editing capabilities. -It incorporates many features to -aid interactive use and has the advantage that the interpretative -language is common to both interactive and non-interactive -use (shell scripts). -That is, commands can be typed directly -to the running shell or can be put into a file, -which can be executed directly by the shell. -. -.Ss Invocation -.\" -.\" XXX This next sentence is incredibly confusing. -.\" -If no arguments are present and if the standard input of the shell -is connected to a terminal -(or if the -.Fl i -option is set), -the shell is considered an interactive shell. -An interactive shell -generally prompts before each command and handles programming -and command errors differently (as described below). -When first starting, the shell inspects argument 0, and -if it begins with a dash -.Pq Ql - , -the shell is also considered a login shell. -This is normally done automatically by the system -when the user first logs in. -A login shell first reads commands -from the files -.Pa /etc/profile -and then -.Pa .profile -in a user's home directory, -if they exist. -If the environment variable -.Ev ENV -is set on entry to a shell, or is set in the -.Pa .profile -of a login shell, the shell then subjects its value to parameter expansion -and arithmetic expansion and reads commands from the named file. -Therefore, a user should place commands that are to be executed only -at login time in the -.Pa .profile -file, and commands that are executed for every shell inside the -.Ev ENV -file. -The user can set the -.Ev ENV -variable to some file by placing the following line in the file -.Pa .profile -in the home directory, -substituting for -.Pa .shrc -the filename desired: -. -.Pp -.Dl "ENV=$HOME/.shrc; export ENV" -. -.Pp -The first non-option argument specified on the command line -will be treated as the -name of a file from which to read commands (a shell script), and -the remaining arguments are set as the positional parameters -of the shell -.Li ( $1 , $2 , -etc.). -Otherwise, the shell reads commands -from its standard input. -. -.Pp -Unlike older versions of -.Xr sh 1 -the -.Ev ENV -script is only sourced on invocation of interactive shells. -This -closes a well-known, and sometimes easily exploitable security -hole related to poorly thought out -.Ev ENV -scripts. -. -.Ss Argument List Processing -All of the single letter options to -.Nm -have a corresponding long name, -with the exception of -.Fl c -and -.Fl /+o . -These long names are provided next to the single letter options -in the descriptions below. -The long name for an option may be specified as an argument to the -.Fl /+o -option of -.Nm . -Once the shell is running, -the long name for an option may be specified as an argument to the -.Fl /+o -option of the -.Ic set -built-in command -(described later in the section called -.Sx Built-in Commands ) . -Introducing an option with a dash -.Pq Ql - -enables the option, -while using a plus -.Pq Ql + -disables the option. -A -.Dq Li -- -or plain -.Ql - -will stop option processing and will force the remaining -words on the command line to be treated as arguments. -The -.Fl /+o -and -.Fl c -options do not have long names. -They take arguments and are described after the single letter options. -. -.Bl -tag -width indent -.It Fl a Li allexport -Flag variables for export when assignments are made to them. -. -.It Fl b Li notify -Enable asynchronous notification of background job -completion. -(UNIMPLEMENTED) -. -.It Fl C Li noclobber -Do not overwrite existing files with -.Ql > . -. -.It Fl E Li emacs -Enable the built-in -.Xr emacs 1 -command line editor (disables the -.Fl V -option if it has been set; -set automatically when interactive on terminals). -. -.It Fl e Li errexit -Exit immediately if any untested command fails in non-interactive mode. -The exit status of a command is considered to be -explicitly tested if the command is part of the list used to control -an -.Ic if , elif , while , -or -.Ic until ; -if the command is the left -hand operand of an -.Dq Li && -or -.Dq Li || -operator; or if the command is a pipeline preceded by the -.Ic !\& -keyword. -If a shell function is executed and its exit status is explicitly -tested, all commands of the function are considered to be tested as -well. -. -.Pp -It is recommended to check for failures explicitly -instead of relying on -.Fl e -because it tends to behave in unexpected ways, -particularly in larger scripts. -. -.It Fl f Li noglob -Disable pathname expansion. -. -.It Fl h Li trackall -A do-nothing option for POSIX compliance. -. -.It Fl I Li ignoreeof -Ignore -.Dv EOF Ap s -from input when in interactive mode. -. -.It Fl i Li interactive -Force the shell to behave interactively. -. -.It Fl m Li monitor -Turn on job control (set automatically when interactive). -A new process group is created for each pipeline (called a job). -It is possible to suspend jobs or to have them run in the foreground or -in the background. -In a non-interactive shell, -this option can be set even if no terminal is available -and is useful to place processes in separate process groups. -. -.It Fl n Li noexec -If not interactive, read commands but do not -execute them. -This is useful for checking the -syntax of shell scripts. -. -.It Fl P Li physical -Change the default for the -.Ic cd -and -.Ic pwd -commands from -.Fl L -(logical directory layout) -to -.Fl P -(physical directory layout). -. -.It Fl p Li privileged -Turn on privileged mode. -This mode is enabled on startup -if either the effective user or group ID is not equal to the -real user or group ID. -Turning this mode off sets the -effective user and group IDs to the real user and group IDs. -When this mode is enabled for interactive shells, the file -.Pa /etc/suid_profile -is sourced instead of -.Pa ~/.profile -after -.Pa /etc/profile -is sourced, and the contents of the -.Ev ENV -variable are ignored. -. -.It Fl s Li stdin -Read commands from standard input (set automatically -if no file arguments are present). -This option has -no effect when set after the shell has already started -running (i.e., when set with the -.Ic set -command). -. -.It Fl T Li trapsasync -When waiting for a child, execute traps immediately. -If this option is not set, -traps are executed after the child exits, -as specified in -.St -p1003.2 . -This nonstandard option is useful for putting guarding shells around -children that block signals. -The surrounding shell may kill the child -or it may just return control to the tty and leave the child alone, -like this: -.Bd -literal -offset indent -1sh -T -c "trap 'exit 1' 2 ; some-blocking-program" -.Ed -. -.It Fl u Li nounset -Write a message to standard error when attempting -to expand a variable, a positional parameter or -the special parameter -.Va \&! -that is not set, and if the -shell is not interactive, exit immediately. -. -.It Fl V Li vi -Enable the built-in -.Xr vi 1 -command line editor (disables -.Fl E -if it has been set). -. -.It Fl v Li verbose -The shell writes its input to standard error -as it is read. -Useful for debugging. -. -.It Fl x Li xtrace -Write each command -(preceded by the value of the -.Va PS4 -variable subjected to parameter expansion and arithmetic expansion) -to standard error before it is executed. -Useful for debugging. -. -.It Li nolog -Another do-nothing option for POSIX compliance. -It only has a long name. -.El -. -.Pp -The -.Fl c -option causes the commands to be read from the -.Ar string -operand instead of from the standard input. -Keep in mind that this option only accepts a single string as its -argument, hence multi-word strings must be quoted. -. -.Pp -The -.Fl /+o -option takes as its only argument the long name of an option -to be enabled or disabled. -For example, the following two invocations of -.Nm -both enable the built-in -.Xr emacs 1 -command line editor: -.Bd -literal -offset indent -set -E -set -o emacs -.Ed -. -.Pp -If used without an argument, the -.Fl o -option displays the current option settings in a human-readable format. -If -.Cm +o -is used without an argument, the current option settings are output -in a format suitable for re-input into the shell. -. -.Ss Lexical Structure -The shell reads input in terms of lines from a file and breaks -it up into words at whitespace (blanks and tabs), and at -certain sequences of -characters called -.Dq operators , -which are special to the shell. -There are two types of operators: control operators and -redirection operators (their meaning is discussed later). -The following is a list of valid operators: -. -.Bl -tag -width indent -.It Control operators: -.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact -.It Li & Ta Li && Ta Li \&( Ta Li \&) Ta Li \en -.It Li ;; Ta Li ;& Ta Li \&; Ta Li \&| Ta Li || -.El -. -.It Redirection operators: -.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact -.It Li < Ta Li > Ta Li << Ta Li >> Ta Li <> -.It Li <& Ta Li >& Ta Li <<- Ta Li >| Ta \& -.El -.El -. -.Pp -The character -.Ql # -introduces a comment if used at the beginning of a word. -The word starting with -.Ql # -and the rest of the line are ignored. -. -.Pp -ASCII -.Dv NUL -characters (character code 0) are not allowed in shell input. -. -.Ss Quoting -Quoting is used to remove the special meaning of certain characters -or words to the shell, such as operators, whitespace, keywords, -or alias names. -. -.Pp -There are four types of quoting: matched single quotes, -dollar-single quotes, -matched double quotes, and backslash. -. -.Bl -tag -width indent -.It Single Quotes -Enclosing characters in single quotes preserves the literal -meaning of all the characters (except single quotes, making -it impossible to put single-quotes in a single-quoted string). -. -.It Dollar-Single Quotes -Enclosing characters between -.Li $' -and -.Li ' -preserves the literal meaning of all characters -except backslashes and single quotes. -A backslash introduces a C-style escape sequence: -. -.Bl -tag -width xUnnnnnnnn -.It \ea -Alert (ring the terminal bell) -.It \eb -Backspace -.It \ec Ns Ar c -The control character denoted by -.Li ^ Ns Ar c -in -.Xr stty 1 . -If -.Ar c -is a backslash, it must be doubled. -.It \ee -The ESC character (ASCII 0x1b) -.It \ef -Formfeed -.It \en -Newline -.It \er -Carriage return -.It \et -Horizontal tab -.It \ev -Vertical tab -.It \e\e -Literal backslash -.It \e\&' -Literal single-quote -.It \e\&" -Literal double-quote -.It \e Ns Ar nnn -The byte whose octal value is -.Ar nnn -(one to three digits) -.It \ex Ns Ar nn -The byte whose hexadecimal value is -.Ar nn -(one or more digits only the last two of which are used) -.It \eu Ns Ar nnnn -The Unicode code point -.Ar nnnn -(four hexadecimal digits) -.It \eU Ns Ar nnnnnnnn -The Unicode code point -.Ar nnnnnnnn -(eight hexadecimal digits) -.El -. -.Pp -The sequences for Unicode code points are currently only useful with -UTF-8 locales. -They reject code point 0 and UTF-16 surrogates. -. -.Pp -If an escape sequence would produce a byte with value 0, -that byte and the rest of the string until the matching single-quote -are ignored. -. -.Pp -Any other string starting with a backslash is an error. -. -.It Double Quotes -Enclosing characters within double quotes preserves the literal -meaning of all characters except dollar sign -.Pq Ql $ , -backquote -.Pq Ql ` , -and backslash -.Pq Ql \e . -The backslash inside double quotes is historically weird. -It remains literal unless it precedes the following characters, -which it serves to quote: -. -.Pp -.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact -.It Li $ Ta Li ` Ta Li \&" Ta Li \e Ta Li \en -.El -. -.It Backslash -A backslash preserves the literal meaning of the following -character, with the exception of the newline character -.Pq Ql \en . -A backslash preceding a newline is treated as a line continuation. -.El -. -.Ss Keywords -Keywords or reserved words are words that have special meaning to the -shell and are recognized at the beginning of a line and -after a control operator. -The following are keywords: -.Bl -column "doneXX" "elifXX" "elseXX" "untilXX" "whileX" -offset center -.It Li \&! Ta { Ta } Ta Ic case Ta Ic do -.It Ic done Ta Ic elif Ta Ic else Ta Ic esac Ta Ic fi -.It Ic for Ta Ic if Ta Ic then Ta Ic until Ta Ic while -.El -. -.Ss Aliases -An alias is a name and corresponding value set using the -.Ic alias -built-in command. -Wherever the command word of a simple command may occur, -and after checking for keywords if a keyword may occur, the shell -checks the word to see if it matches an alias. -If it does, it replaces it in the input stream with its value. -For example, if there is an alias called -.Dq Li lf -with the value -.Dq Li "ls -F" , -then the input -.Pp -.Dl "lf foobar" -.Pp -would become -.Pp -.Dl "ls -F foobar" -. -.Pp -Aliases are also recognized after an alias -whose value ends with a space or tab. -For example, if there is also an alias called -.Dq Li nohup -with the value -.Dq Li "nohup " , -then the input -.Pp -.Dl "nohup lf foobar" -.Pp -would become -.Pp -.Dl "nohup ls -F foobar" -. -.Pp -Aliases provide a convenient way for naive users to -create shorthands for commands without having to learn how -to create functions with arguments. -Using aliases in scripts is discouraged -because the command that defines them must be executed -before the code that uses them is parsed. -This is fragile and not portable. -. -.Pp -An alias name may be escaped in a command line, so that it is not -replaced by its alias value, by using quoting characters within or -adjacent to the alias name. -This is most often done by prefixing -an alias name with a backslash to execute a function, built-in, or -normal program with the same name. -See the -.Sx Quoting -subsection. -. -.Ss Commands -The shell interprets the words it reads according to a -language, the specification of which is outside the scope -of this man page (refer to the BNF in the -.St -p1003.2 -document). -Essentially though, a line is read and if -the first word of the line (or after a control operator) -is not a keyword, then the shell has recognized a -simple command. -Otherwise, a complex command or some -other special construct may have been recognized. -. -.Ss Simple Commands -If a simple command has been recognized, the shell performs -the following actions: -. -.Bl -enum -.It -Leading words of the form -.Dq Li name=value -are stripped off and assigned to the environment of -the simple command -(they do not affect expansions). -Redirection operators and -their arguments (as described below) are stripped -off and saved for processing. -. -.It -The remaining words are expanded as described in -the section called -.Sx Word Expansions , -and the first remaining word is considered the command -name and the command is located. -The remaining -words are considered the arguments of the command. -If no command name resulted, then the -.Dq Li name=value -variable assignments recognized in 1) affect the -current shell. -. -.It -Redirections are performed as described in -the next section. -.El -. -.Ss Redirections -Redirections are used to change where a command reads its input -or sends its output. -In general, redirections open, close, or -duplicate an existing reference to a file. -The overall format -used for redirection is: -.Pp -.D1 Oo Ar n Oc Ar redir-op file -. -.Pp -The -.Ar redir-op -is one of the redirection operators mentioned -previously. -The following gives some examples of how these -operators can be used. -Note that stdin and stdout are commonly used abbreviations -for standard input and standard output respectively. -. -.Bl -tag -width "1234567890XX" -offset indent -.It Oo Ar n Oc Ns Li > Ar file -redirect stdout (or file descriptor -.Ar n ) -to -.Ar file -. -.It Oo Ar n Oc Ns Li >| Ar file -same as above, but override the -.Fl C -option -. -.It Oo Ar n Oc Ns Li >> Ar file -append stdout (or file descriptor -.Ar n ) -to -.Ar file -. -.It Oo Ar n Oc Ns Li < Ar file -redirect stdin (or file descriptor -.Ar n ) -from -.Ar file -. -.It Oo Ar n Oc Ns Li <> Ar file -redirect stdin (or file descriptor -.Ar n ) -to and from -.Ar file -. -.It Oo Ar n1 Oc Ns Li <& Ns Ar n2 -duplicate stdin (or file descriptor -.Ar n1 ) -from file descriptor -.Ar n2 -. -.It Oo Ar n Oc Ns Li <&- -close stdin (or file descriptor -.Ar n ) -. -.It Oo Ar n1 Oc Ns Li >& Ns Ar n2 -duplicate stdout (or file descriptor -.Ar n1 ) -to file descriptor -.Ar n2 -. -.It Oo Ar n Oc Ns Li >&- -close stdout (or file descriptor -.Ar n ) -.El -. -.Pp -The following redirection is often called a -.Dq here-document . -.Bd -unfilled -offset indent -.Oo Ar n Oc Ns Li << Ar delimiter -.Ar here-doc-text -.Ar ... -.Ar delimiter -.Ed -. -.Pp -All the text on successive lines up to the delimiter is -saved away and made available to the command on standard -input, or file descriptor -.Ar n -if it is specified. -If the -.Ar delimiter -as specified on the initial line is quoted, then the -.Ar here-doc-text -is treated literally, otherwise the text is subjected to -parameter expansion, command substitution, and arithmetic -expansion (as described in the section on -.Sx Word Expansions ) . -If the operator is -.Dq Li <<- -instead of -.Dq Li << , -then leading tabs -in the -.Ar here-doc-text -are stripped. -. -.Ss Search and Execution -There are three types of commands: shell functions, -built-in commands, and normal programs. -The command is searched for (by name) in that order. -The three types of commands are all executed in a different way. -. -.Pp -When a shell function is executed, all of the shell positional -parameters (except -.Li $0 , -which remains unchanged) are -set to the arguments of the shell function. -The variables which are explicitly placed in the environment of -the command (by placing assignments to them before the -function name) are made local to the function and are set -to the values given. -Then the command given in the function definition is executed. -The positional parameters are restored to their original values -when the command completes. -This all occurs within the current shell. -. -.Pp -Shell built-in commands are executed internally to the shell, without -spawning a new process. -There are two kinds of built-in commands: regular and special. -Assignments before special builtins persist after they finish -executing and assignment errors, redirection errors and certain -operand errors cause a script to be aborted. -Special builtins cannot be overridden with a function. -Both regular and special builtins can affect the shell in ways -normal programs cannot. -. -.Pp -Otherwise, if the command name does not match a function -or built-in command, the command is searched for as a normal -program in the file system (as described in the next section). -When a normal program is executed, the shell runs the program, -passing the arguments and the environment to the program. -If the program is not a normal executable file -(i.e., if it does not begin with the -.Dq "magic number" -whose ASCII representation is -.Dq Li #! , -resulting in an -.Er ENOEXEC -return value from -.Xr execve 2 ) -but appears to be a text file, -the shell will run a new instance of -.Nm -to interpret it. -. -.Pp -Note that previous versions of this document -and the source code itself misleadingly and sporadically -refer to a shell script without a magic number -as a -.Dq "shell procedure" . -. -.Ss Path Search -When locating a command, the shell first looks to see if -it has a shell function by that name. -Then it looks for a -built-in command by that name. -If a built-in command is not found, -one of two things happen: -. -.Bl -enum -.It -Command names containing a slash are simply executed without -performing any searches. -. -.It -The shell searches each entry in the -.Va PATH -variable -in turn for the command. -The value of the -.Va PATH -variable should be a series of -entries separated by colons. -Each entry consists of a -directory name. -The current directory -may be indicated implicitly by an empty directory name, -or explicitly by a single period. -.El -. -.Ss Command Exit Status -Each command has an exit status that can influence the behavior -of other shell commands. -The paradigm is that a command exits -with zero for normal or success, and non-zero for failure, -error, or a false indication. -The man page for each command -should indicate the various exit codes and what they mean. -Additionally, the built-in commands return exit codes, as does -an executed shell function. -. -.Pp -If a command is terminated by a signal, its exit status is greater than 128. -The signal name can be found by passing the exit status to -.Li kill -l . -. -.Pp -If there is no command word, -the exit status is the exit status of the last command substitution executed, -or zero if the command does not contain any command substitutions. -. -.Ss Complex Commands -Complex commands are combinations of simple commands -with control operators or keywords, together creating a larger complex -command. -More generally, a command is one of the following: -. -.Bl -item -offset indent -.It -simple command -.It -pipeline -.It -list or compound-list -.It -compound command -.It -function definition -.El -. -.Pp -Unless otherwise stated, the exit status of a command is -that of the last simple command executed by the command, -or zero if no simple command was executed. -. -.Ss Pipelines -A pipeline is a sequence of one or more commands separated -by the control operator -.Ql \&| . -The standard output of all but -the last command is connected to the standard input -of the next command. -The standard output of the last -command is inherited from the shell, as usual. -. -.Pp -The format for a pipeline is: -.Pp -.D1 Oo Li \&! Oc Ar command1 Op Li \&| Ar command2 ... -. -.Pp -The standard output of -.Ar command1 -is connected to the standard input of -.Ar command2 . -The standard input, standard output, or -both of a command is considered to be assigned by the -pipeline before any redirection specified by redirection -operators that are part of the command. -. -.Pp -Note that unlike some other shells, -.Nm -executes each process in a pipeline with more than one command -in a subshell environment and as a child of the -.Nm -process. -. -.Pp -If the pipeline is not in the background (discussed later), -the shell waits for all commands to complete. -. -.Pp -If the keyword -.Ic !\& -does not precede the pipeline, the -exit status is the exit status of the last command specified -in the pipeline. -Otherwise, the exit status is the logical -NOT of the exit status of the last command. -That is, if -the last command returns zero, the exit status is 1; if -the last command returns greater than zero, the exit status -is zero. -. -.Pp -Because pipeline assignment of standard input or standard -output or both takes place before redirection, it can be -modified by redirection. -For example: -.Pp -.Dl "command1 2>&1 | command2" -. -.Pp -sends both the standard output and standard error of -.Ar command1 -to the standard input of -.Ar command2 . -. -.Pp -A -.Ql \&; -or newline terminator causes the preceding -AND-OR-list -(described below in the section called -.Sx Short-Circuit List Operators ) -to be executed sequentially; -an -.Ql & -causes asynchronous execution of the preceding AND-OR-list. -. -.Ss Background Commands (&) -If a command is terminated by the control operator ampersand -.Pq Ql & , -the shell executes the command in a subshell environment (see -.Sx Grouping Commands Together -below) and asynchronously; -the shell does not wait for the command to finish -before executing the next command. -. -.Pp -The format for running a command in background is: -.Pp -.D1 Ar command1 Li & Op Ar command2 Li & Ar ... -. -.Pp -If the shell is not interactive, the standard input of an -asynchronous command is set to -.Pa /dev/null . -. -.Pp -The exit status is zero. -. -.Ss Lists (Generally Speaking) -A list is a sequence of zero or more commands separated by -newlines, semicolons, or ampersands, -and optionally terminated by one of these three characters. -The commands in a -list are executed in the order they are written. -If command is followed by an ampersand, the shell starts the -command and immediately proceeds onto the next command; -otherwise it waits for the command to terminate before -proceeding to the next one. -. -.Ss Short-Circuit List Operators -.Dq Li && -and -.Dq Li || -are AND-OR list operators. -.Dq Li && -executes the first command, and then executes the second command -if the exit status of the first command is zero. -.Dq Li || -is similar, but executes the second command if the exit -status of the first command is nonzero. -.Dq Li && -and -.Dq Li || -both have the same priority. -. -.Ss Flow-Control Constructs (if, while, for, case) -The syntax of the -.Ic if -command is: -.Bd -unfilled -offset indent -compact -.Ic if Ar list -.Ic then Ar list -.Oo Ic elif Ar list -.Ic then Ar list Oc Ar ... -.Op Ic else Ar list -.Ic fi -.Ed -. -.Pp -The exit status is that of selected -.Ic then -or -.Ic else -list, -or zero if no list was selected. -. -.Pp -The syntax of the -.Ic while -command is: -.Bd -unfilled -offset indent -compact -.Ic while Ar list -.Ic do Ar list -.Ic done -.Ed -. -.Pp -The two lists are executed repeatedly while the exit status of the -first list is zero. -The -.Ic until -command is similar, but has the word -.Ic until -in place of -.Ic while , -which causes it to -repeat until the exit status of the first list is zero. -. -.Pp -The exit status is that of the last execution of the second list, -or zero if it was never executed. -. -.Pp -The syntax of the -.Ic for -command is: -.Bd -unfilled -offset indent -compact -.Ic for Ar variable Op Ic in Ar word ... -.Ic do Ar list -.Ic done -.Ed -. -.Pp -If -.Ic in -and the following words are omitted, -.Ic in Li \&"$@\&" -is used instead. -The words are expanded, and then the list is executed -repeatedly with the variable set to each word in turn. -The -.Ic do -and -.Ic done -commands may be replaced with -.Ql { -and -.Ql } . -. -.Pp -The syntax of the -.Ic break -and -.Ic continue -commands is: -.D1 Ic break Op Ar num -.D1 Ic continue Op Ar num -. -.Pp -The -.Ic break -command terminates the -.Ar num -innermost -.Ic for -or -.Ic while -loops. -The -.Ic continue -command continues with the next iteration of the innermost loop. -These are implemented as special built-in commands. -. -.Pp -The syntax of the -.Ic case -command is: -.Bd -unfilled -offset indent -compact -.Ic case Ar word Ic in -.Ar pattern ) Ar list Li ;; -.Ar ... -.Ic esac -.Ed -. -.Pp -The pattern can actually be one or more patterns -(see -.Sx Shell Patterns -described later), -separated by -.Ql \&| -characters. -Tilde expansion, parameter expansion, command substitution, -arithmetic expansion and quote removal are applied to the word. -Then, each pattern is expanded in turn using tilde expansion, -parameter expansion, command substitution and arithmetic expansion and -the expanded form of the word is checked against it. -If a match is found, the corresponding list is executed. -If the selected list is terminated by the control operator -.Ql ;& -instead of -.Ql ;; , -execution continues with the next list, -continuing until a list terminated with -.Ql ;; -or the end of the -.Ic case -command. -. -.Ss Grouping Commands Together -Commands may be grouped by writing either -.Pp -.Sm off -.Bd -literal -offset -ident -.Po Ar list Pc -.Ed -.Sm on -.Pp -or -.Bd -literal -offset -ident -.No { Ar list ; } -.Ed -. -.Pp -The first form executes the commands in a subshell environment. -A subshell environment has its own copy of: -.Bl -enum -.It -The current working directory as set by -.Ic cd . -.It -The file creation mask as set by -.Ic umask . -.It -Resource limits as set by -.Ic ulimit . -.It -References to open files. -.It -Traps as set by -.Ic trap . -.It -Known jobs. -.It -Positional parameters and variables. -.It -Shell options. -.It -Shell functions. -.It -Shell aliases. -.El -. -.Pp -These are copied from the parent shell environment, -except that trapped (but not ignored) signals are reset to the default action -and known jobs are cleared. -Any changes do not affect the parent shell environment. -. -.Pp -A subshell environment may be implemented as a child process or differently. -If job control is enabled in an interactive shell, -commands grouped in parentheses can be suspended and continued as a unit. -. -.Pp -For compatibility with other shells, -two open parentheses in sequence should be separated by whitespace. -. -.Pp -The second form never forks another shell, -so it is slightly more efficient. -Grouping commands together this way allows the user to -redirect their output as though they were one program: -.Bd -literal -offset indent -{ echo -n "hello"; echo " world"; } > greeting -.Ed -. -.Ss Functions -The syntax of a function definition is -.Pp -.D1 Ar name Li \&( \&) Ar command -. -.Pp -A function definition is an executable statement; when -executed it installs a function named -.Ar name -and returns an -exit status of zero. -The -.Ar command -is normally a list -enclosed between -.Ql { -and -.Ql } . -. -.Pp -Variables may be declared to be local to a function by -using the -.Ic local -command. -This should appear as the first statement of a function, -and the syntax is: -.Pp -.D1 Ic local Oo Ar variable ... Oc Op Fl -. -.Pp -The -.Ic local -command is implemented as a built-in command. -The exit status is zero -unless the command is not in a function or a variable name is invalid. -. -.Pp -When a variable is made local, it inherits the initial -value and exported and readonly flags from the variable -with the same name in the surrounding scope, if there is -one. -Otherwise, the variable is initially unset. -The shell -uses dynamic scoping, so that if the variable -.Va x -is made local to function -.Em f , -which then calls function -.Em g , -references to the variable -.Va x -made inside -.Em g -will refer to the variable -.Va x -declared inside -.Em f , -not to the global variable named -.Va x . -. -.Pp -The only special parameter that can be made local is -.Ql - . -Making -.Ql - -local causes any shell options -(including those that only have long names) -that are -changed via the -.Ic set -command inside the function to be -restored to their original values when the function -returns. -. -.Pp -The syntax of the -.Ic return -command is -.Pp -.D1 Ic return Op Ar exitstatus -. -.Pp -It terminates the current executional scope, returning from the closest -nested function or sourced script; -if no function or sourced script is being executed, -it exits the shell instance. -The -.Ic return -command is implemented as a special built-in command. -. -.Ss Variables and Parameters -The shell maintains a set of parameters. -A parameter -denoted by a name -(consisting solely -of alphabetics, numerics, and underscores, -and starting with an alphabetic or an underscore) -is called a variable. -When starting up, -the shell turns all environment variables with valid names into shell -variables. -New variables can be set using the form -.Pp -.D1 Ar name Ns = Ns Ar value -. -.Pp -A parameter can also be denoted by a number -or a special character as explained below. -. -.Pp -Assignments are expanded differently from other words: -tilde expansion is also performed after the equals sign and after any colon -and usernames are also terminated by colons, -and field splitting and pathname expansion are not performed. -. -.Pp -This special expansion applies not only to assignments that form a simple -command by themselves or precede a command word, -but also to words passed to the -.Ic export , -.Ic local -or -.Ic readonly -built-in commands that have this form. -For this, the builtin's name must be literal -(not the result of an expansion) -and may optionally be preceded by one or more literal instances of -.Ic command -without options. -. -.Ss Positional Parameters -A positional parameter is a parameter denoted by a number greater than zero. -The shell sets these initially to the values of its command line -arguments that follow the name of the shell script. -The -.Ic set -built-in command can also be used to set or reset them. -. -.Ss Special Parameters -Special parameters are parameters denoted by a single special character -or the digit zero. -They are shown in the following list, exactly as they would appear in input -typed by the user or in the source of a shell script. -. -.Bl -hang -.It Li $* -Expands to the positional parameters, starting from one. -When -the expansion occurs within a double-quoted string -it expands to a single field with the value of each parameter -separated by the first character of the -.Va IFS -variable, -or by a space if -.Va IFS -is unset. -. -.It Li $@ -Expands to the positional parameters, starting from one. -When -the expansion occurs within double-quotes, each positional -parameter expands as a separate argument. -If there are no positional parameters, the -expansion of -.Li @ -generates zero arguments, even when -.Li @ -is double-quoted. -What this basically means, for example, is -if -.Li $1 -is -.Dq Li abc -and -.Li $2 -is -.Dq Li "def ghi" , -then -.Li \&"$@\&" -expands to -the two arguments: -.Bd -literal -offset indent -"abc" "def ghi" -.Ed -. -.It Li $# -Expands to the number of positional parameters. -. -.It Li $? -Expands to the exit status of the most recent pipeline. -. -.It Li $- -(hyphen) Expands to the current option flags (the single-letter -option names concatenated into a string) as specified on -invocation, by the -.Ic set -built-in command, or implicitly -by the shell. -. -.It Li $$ -Expands to the process ID of the invoked shell. -A subshell -retains the same value of -.Va $ -as its parent. -. -.It Li $! -Expands to the process ID of the most recent background -command executed from the current shell. -For a -pipeline, the process ID is that of the last command in the -pipeline. -If this parameter is referenced, the shell will remember -the process ID and its exit status until the -.Ic wait -built-in command reports completion of the process. -. -.It Li $0 -(zero) Expands to the name of the shell script if passed on the command line, -the -.Ar name -operand if given (with -.Fl c ) -or otherwise argument 0 passed to the shell. -.El -. -.Ss Special Variables -The following variables are set by the shell or -have special meaning to it: -. -.Bl -tag -width ".Va HISTSIZE" -.It Va CDPATH -The search path used with the -.Ic cd -built-in. -. -.It Va EDITOR -The fallback editor used with the -.Ic fc -built-in. -If not set, the default editor is -.Xr ed 1 . -. -.It Va FCEDIT -The default editor used with the -.Ic fc -built-in. -. -.It Va HISTFILE -The path to the file in which command history is saved. -History is loaded when -.Va HISTFILE -is set and saved on exit. -. -.It Va HISTSIZE -The number of previous commands that are accessible. -. -.It Va HOME -The user's home directory, -used in tilde expansion and as a default directory for the -.Ic cd -built-in. -. -.It Va IFS -Input Field Separators. -This is initialized at startup to -.Aq space , -.Aq tab , -and -.Aq newline -in that order. -This value also applies if -.Va IFS -is unset, but not if it is set to the empty string. -See the -.Sx White Space Splitting -section for more details. -. -.It Va LINENO -The current line number in the script or function. -. -.It Va MAIL -The name of a mail file, that will be checked for the arrival of new -mail. -Overridden by -.Va MAILPATH . -. -.It Va MAILPATH -A colon -.Pq Ql \&: -separated list of file names, for the shell to check for incoming -mail. -This variable overrides the -.Va MAIL -setting. -There is a maximum of 10 mailboxes that can be monitored at once. -. -.It Va OPTIND -The index of the next argument to be processed by -.Ic getopts . -This is initialized to 1 at startup. -. -.It Va PATH -The default search path for executables. -See the -.Sx Path Search -section for details. -. -.It Va PPID -The parent process ID of the invoked shell. -This is set at startup -unless this variable is in the environment. -A later change of parent process ID is not reflected. -A subshell retains the same value of -.Va PPID . -. -.It Va PS0 -The pre-prompt string, -which is printed before each new prompt. -.Va PS0 -may include any of the formatting sequences from -.Va PS1 . -. -.It Va PS1 -The primary prompt string, which defaults to -.Dq Li "\e$ " . -.Va PS1 -may include any of the following formatting sequences, -which are replaced by the given information: -.Bl -tag -width indent -.It Li \eH -This system's fully-qualified hostname (FQDN). -.It Li \eh -This system's hostname. -.It Li \eW -The final component of the current working directory. -.It Li \ew -The entire path of the current working directory. -.It Li \e? -Exit status if it is non-zero, empty string otherwise. -.It Li \e$ -Superuser status. -.Dq Li "$ " -for normal users and -.Dq Li "# " -for superusers. -.It Li \e\e -A literal backslash. -.El -. -.It Va PS2 -The secondary prompt string, which defaults to -.Dq Li "> " . -.Va PS2 -may include any of the formatting sequences from -.Va PS1 . -. -.It Va PS4 -The prefix for the trace output (if -.Fl x -is active). -The default is -.Dq Li "+ " . -. -.It Va RPS1 -The primary right prompt string. -.Va RPS1 -may include any of the formatting sequences from -.Va PS1 . -. -.It Va RPS2 -The secondary right prompt string. -.Va RPS2 -may include any of the formatting sequences from -.Va PS1 . -.El -. -.Ss Word Expansions -This clause describes the various expansions that are -performed on words. -Not all expansions are performed on -every word, as explained later. -. -.Pp -Tilde expansions, parameter expansions, command substitutions, -arithmetic expansions, and quote removals that occur within -a single word expand to a single field. -It is only field -splitting or pathname expansion that can create multiple -fields from a single word. -The single exception to this rule is -the expansion of the special parameter -.Va @ -within double-quotes, -as was described above. -. -.Pp -The order of word expansion is: -.Bl -enum -.It -Tilde Expansion, Parameter Expansion, Command Substitution, -Arithmetic Expansion (these all occur at the same time). -.It -Field Splitting is performed on fields generated by step (1) -unless the -.Va IFS -variable is null. -.It -Pathname Expansion (unless the -.Fl f -option is in effect). -.It -Quote Removal. -.El -. -.Pp -The -.Ql $ -character is used to introduce parameter expansion, command -substitution, or arithmetic expansion. -. -.Ss Tilde Expansion (substituting a user's home directory) -A word beginning with an unquoted tilde character -.Pq Ql ~ -is -subjected to tilde expansion. -All the characters up to a slash -.Pq Ql / -or the end of the word are treated as a username -and are replaced with the user's home directory. -If the -username is missing (as in -.Pa ~/foobar ) , -the tilde is replaced with the value of the -.Va HOME -variable (the current user's home directory). -. -.Ss Parameter Expansion -The format for parameter expansion is as follows: -.Pp -.D1 Li ${ Ns Ar expression Ns Li } -.Pp -where -.Ar expression -consists of all characters until the matching -.Ql } . -Any -.Ql } -escaped by a backslash or within a single-quoted or double-quoted -string, and characters in -embedded arithmetic expansions, command substitutions, and variable -expansions, are not examined in determining the matching -.Ql } . -If the variants with -.Ql + , -.Ql - , -.Ql = -or -.Ql ?\& -occur within a double-quoted string, -as an extension there may be unquoted parts -(via double-quotes inside the expansion); -.Ql } -within such parts are also not examined in determining the matching -.Ql } . -. -.Pp -The simplest form for parameter expansion is: -.Pp -.D1 Li ${ Ns Ar parameter Ns Li } -.Pp -The value, if any, of -.Ar parameter -is substituted. -. -.Pp -The parameter name or symbol can be enclosed in braces, which are -optional except for positional parameters with more than one digit or -when parameter is followed by a character that could be interpreted as -part of the name. -If a parameter expansion occurs inside double-quotes: -.Bl -enum -.It -Field splitting is not performed on the results of the -expansion, with the exception of the special parameter -.Va @ . -.It -Pathname expansion is not performed on the results of the -expansion. -.El -. -.Pp -In addition, a parameter expansion can be modified by using one of the -following formats. -. -.Bl -tag -width indent -.It Li ${ Ns Ar parameter Ns Li :- Ns Ar word Ns Li } -Use Default Values. -If -.Ar parameter -is unset or null, the expansion of -.Ar word -is substituted; otherwise, the value of -.Ar parameter -is substituted. -. -.It Li ${ Ns Ar parameter Ns Li := Ns Ar word Ns Li } -Assign Default Values. -If -.Ar parameter -is unset or null, the expansion of -.Ar word -is assigned to -.Ar parameter . -In all cases, the -final value of -.Ar parameter -is substituted. -Quoting inside -.Ar word -does not prevent field splitting or pathname expansion. -Only variables, not positional -parameters or special parameters, can be -assigned in this way. -. -.It Li ${ Ns Ar parameter Ns Li :? Ns Oo Ar word Oc Ns Li } -Indicate Error if Null or Unset. -If -.Ar parameter -is unset or null, the expansion of -.Ar word -(or a message indicating it is unset if -.Ar word -is omitted) is written to standard -error and the shell exits with a nonzero -exit status. -Otherwise, the value of -.Ar parameter -is substituted. -An -interactive shell need not exit. -. -.It Li ${ Ns Ar parameter Ns Li :+ Ns Ar word Ns Li } -Use Alternate Value. -If -.Ar parameter -is unset or null, null is substituted; -otherwise, the expansion of -.Ar word -is substituted. -.El -. -.Pp -In the parameter expansions shown previously, use of the colon in the -format results in a test for a parameter that is unset or null; omission -of the colon results in a test for a parameter that is only unset. -. -.Pp -The -.Ar word -inherits the type of quoting -(unquoted, double-quoted or here-document) -from the surroundings, -with the exception that a backslash that quotes a closing brace is removed -during quote removal. -.Bl -tag -width indent -.It Li ${# Ns Ar parameter Ns Li } -String Length. -The length in characters of -the value of -.Ar parameter . -.El -. -.Pp -The following four varieties of parameter expansion provide for substring -processing. -In each case, pattern matching notation -(see -.Sx Shell Patterns ) , -rather than regular expression notation, -is used to evaluate the patterns. -If parameter is one of the special parameters -.Va * -or -.Va @ , -the result of the expansion is unspecified. -Enclosing the full parameter expansion string in double-quotes does not -cause the following four varieties of pattern characters to be quoted, -whereas quoting characters within the braces has this effect. -. -.Bl -tag -width indent -.It Li ${ Ns Ar parameter Ns Li % Ns Ar word Ns Li } -Remove Smallest Suffix Pattern. -The -.Ar word -is expanded to produce a pattern. -The -parameter expansion then results in -.Ar parameter , -with the smallest portion of the -suffix matched by the pattern deleted. -. -.It Li ${ Ns Ar parameter Ns Li %% Ns Ar word Ns Li } -Remove Largest Suffix Pattern. -The -.Ar word -is expanded to produce a pattern. -The -parameter expansion then results in -.Ar parameter , -with the largest portion of the -suffix matched by the pattern deleted. -. -.It Li ${ Ns Ar parameter Ns Li # Ns Ar word Ns Li } -Remove Smallest Prefix Pattern. -The -.Ar word -is expanded to produce a pattern. -The -parameter expansion then results in -.Ar parameter , -with the smallest portion of the -prefix matched by the pattern deleted. -. -.It Li ${ Ns Ar parameter Ns Li ## Ns Ar word Ns Li } -Remove Largest Prefix Pattern. -The -.Ar word -is expanded to produce a pattern. -The -parameter expansion then results in -.Ar parameter , -with the largest portion of the -prefix matched by the pattern deleted. -.El -. -.Ss Command Substitution -Command substitution allows the output of a command to be substituted in -place of the command name itself. -Command substitution occurs when -the command is enclosed as follows: -.Pp -.D1 Li $( Ns Ar command Ns Li )\& -.Pp -or the backquoted version: -.Pp -.D1 Li ` Ns Ar command Ns Li ` -. -.Pp -The shell expands the command substitution by executing command -and replacing the command substitution -with the standard output of the command, -removing sequences of one or more newlines at the end of the substitution. -Embedded newlines before the end of the output are not removed; -however, during field splitting, they may be translated into spaces -depending on the value of -.Va IFS -and the quoting that is in effect. -The command is executed in a subshell environment, -except that the built-in commands -.Ic jobid , -.Ic jobs , -and -.Ic trap -return information about the parent shell environment -and -.Ic times -returns information about the same process -if they are the only command in a command substitution. -. -.Pp -If a command substitution of the -.Li $( -form begins with a subshell, -the -.Li $( -and -.Li (\& -must be separated by whitespace -to avoid ambiguity with arithmetic expansion. -. -.Ss Arithmetic Expansion -Arithmetic expansion provides a mechanism for evaluating an arithmetic -expression and substituting its value. -The format for arithmetic expansion is as follows: -.Pp -.D1 Li $(( Ns Ar expression Ns Li )) -. -.Pp -The -.Ar expression -is treated as if it were in double-quotes, except -that a double-quote inside the expression is not treated specially. -The -shell expands all tokens in the -.Ar expression -for parameter expansion, -command substitution, -arithmetic expansion -and quote removal. -. -.Pp -The allowed expressions are a subset of C expressions, -summarized below. -. -.Bl -tag -width "Variables" -offset indent -.It Values -All values are of type -.Ft intmax_t . -. -.It Constants -Decimal, octal (starting with -.Li 0 ) -and hexadecimal (starting with -.Li 0x ) -integer constants. -. -.It Variables -Shell variables can be read and written -and contain integer constants. -. -.It Unary operators -.Li "! ~ + -" -. -.It Binary operators -.Li "* / % + - << >> < <= > >= == != & ^ | && ||"\& -. -.It Assignment operators -.Li "= += -= *= /= %= <<= >>= &= ^= |=" -. -.It Conditional operator -.Li "? :"\& -.El -. -.Pp -The result of the expression is substituted in decimal. -. -.Ss White Space Splitting (Field Splitting) -In certain contexts, -after parameter expansion, command substitution, and -arithmetic expansion the shell scans the results of -expansions and substitutions that did not occur in double-quotes for -field splitting and multiple fields can result. -. -.Pp -Characters in -.Va IFS -that are whitespace -.Po -.Aq space , -.Aq tab , -and -.Aq newline -.Pc -are treated differently from other characters in -.Va IFS . -. -.Pp -Whitespace in -.Va IFS -at the beginning or end of a word is discarded. -. -.Pp -Subsequently, a field is delimited by either -.Bl -enum -.It -a non-whitespace character in -.Va IFS -with any whitespace in -.Va IFS -surrounding it, or -.It -one or more whitespace characters in -.Va IFS . -.El -. -.Pp -If a word ends with a non-whitespace character in -.Va IFS , -there is no empty field after this character. -. -.Pp -If no field is delimited, the word is discarded. -In particular, if a word consists solely of an unquoted substitution -and the result of the substitution is null, -it is removed by field splitting even if -.Va IFS -is null. -. -.Ss Pathname Expansion (File Name Generation) -Unless the -.Fl f -option is set, -file name generation is performed -after word splitting is complete. -Each word is -viewed as a series of patterns, separated by slashes. -The -process of expansion replaces the word with the names of -all existing files whose names can be formed by replacing -each pattern with a string that matches the specified pattern. -There are two restrictions on this: first, a pattern cannot match -a string containing a slash, and second, -a pattern cannot match a string starting with a period -unless the first character of the pattern is a period. -The next section describes the patterns used for -Pathname Expansion, -the four varieties of parameter expansion for substring processing and the -.Ic case -command. -. -.Ss Shell Patterns -A pattern consists of normal characters, which match themselves, -and meta-characters. -The meta-characters are -.Ql * , -.Ql \&? , -and -.Ql \&[ . -These characters lose their special meanings if they are quoted. -When command or variable substitution is performed and the dollar sign -or back quotes are not double-quoted, the value of the -variable or the output of the command is scanned for these -characters and they are turned into meta-characters. -. -.Pp -An asterisk -.Pq Ql * -matches any string of characters. -A question mark -.Pq Ql \&? -matches any single character. -A left bracket -.Pq Ql \&[ -introduces a character class. -The end of the character class is indicated by a -.Ql \&] ; -if the -.Ql \&] -is missing then the -.Ql \&[ -matches a -.Ql \&[ -rather than introducing a character class. -A character class matches any of the characters between the square brackets. -A locale-dependent range of characters may be specified using a minus sign. -A named class of characters (see -.Xr wctype 3 ) -may be specified by surrounding the name with -.Ql \&[:\& -and -.Ql :\&] . -For example, -.Ql \&[\&[:alpha:\&]\&] -is a shell pattern that matches a single letter. -The character class may be complemented by making an exclamation point -.Pq Ql !\& -the first character of the character class. -A caret -.Pq Ql ^ -has the same effect but is non-standard. -. -.Pp -To include a -.Ql \&] -in a character class, make it the first character listed -(after the -.Ql \&! -or -.Ql ^ , -if any). -To include a -.Ql - , -make it the first or last character listed. -. -.Ss Built-in Commands -This section lists the built-in commands. -.Bl -tag -width indent -.It Ic \&: -A null command that returns a 0 (true) exit value. -. -.It Ic \&. Ar file -The commands in the specified file are read and executed by the shell. -The -.Ic return -command may be used to return to the -.Ic \&. -command's caller. -If -.Ar file -contains any -.Ql / -characters, it is used as is. -Otherwise, the shell searches the -.Va PATH -for the file. -If it is not found in the -.Va PATH , -it is sought in the current working directory. -. -.It Ic \&[ -A built-in equivalent of -.Xr test 1 . -This version is documented in -.Xr 1sh-test 1 . -. -.It Ic alias Oo Ar name Ns Oo = Ns Ar string Oc ... Oc -If -.Ar name Ns = Ns Ar string -is specified, the shell defines the alias -.Ar name -with value -.Ar string . -If just -.Ar name -is specified, the value of the alias -.Ar name -is printed. -With no arguments, the -.Ic alias -built-in command prints the names and values of all defined aliases -(see -.Ic unalias ) . -Alias values are written with appropriate quoting so that they are -suitable for re-input to the shell. -Also see the -.Sx Aliases -subsection. -. -.It Ic bg Op Ar job ... -Continue the specified jobs -(or the current job if no jobs are given) -in the background. -. -.It Ic bind Oo Fl aeklrsv Oc Oo Ar key Oo Ar command Oc Oc -List or alter key bindings for the line editor. -This command is documented in -.Xr editrc 5 . -. -.It Ic break Op Ar num -See the -.Sx Flow-Control Constructs -subsection. -. -.It Ic builtin Ar cmd Op Ar arg ... -Execute the specified built-in command, -.Ar cmd . -This is useful when the user wishes to override a shell function -with the same name as a built-in command. -. -.It Ic cd Oo Fl L | P Oc Oo Fl e Oc Op Ar directory -.It Ic cd Fl -Switch to the specified -.Ar directory , -to the directory specified in the -.Va HOME -environment variable if no -.Ar directory -is specified or -to the directory specified in the -.Va OLDPWD -environment variable if -.Ar directory -is -.Fl . -If -.Ar directory -does not begin with -.Pa / , \&. , -or -.Pa .. , -then the directories listed in the -.Va CDPATH -variable will be -searched for the specified -.Ar directory . -If -.Va CDPATH -is unset, the current directory is searched. -The format of -.Va CDPATH -is the same as that of -.Va PATH . -In an interactive shell, -the -.Ic cd -command will print out the name of the directory -that it actually switched to -if the -.Va CDPATH -mechanism was used or if -.Ar directory -was -.Fl . -. -.Pp -If the -.Fl P -option is specified, -.Pa .. -is handled physically and symbolic links are resolved before -.Pa .. -components are processed. -If the -.Fl L -option is specified, -.Pa .. -is handled logically. -This is the default. -. -.Pp -The -.Fl e -option causes -.Ic cd -to return exit status 1 if the full pathname of the new directory -cannot be determined reliably or at all. -Normally this is not considered an error, -although a warning is printed. -. -.Pp -If changing the directory fails, the exit status is greater than 1. -If the directory is changed, the exit status is 0, or also 1 if -.Fl e -was given. -. -.It Ic chdir -A synonym for the -.Ic cd -built-in command. -. -.It Ic command Oo Fl p Oc Op Ar utility Op Ar argument ... -.It Ic command Oo Fl p Oc Fl v Ar utility -.It Ic command Oo Fl p Oc Fl V Ar utility -The first form of invocation executes the specified -.Ar utility , -ignoring shell functions in the search. -If -.Ar utility -is a special builtin, -it is executed as if it were a regular builtin. -. -.Pp -If the -.Fl p -option is specified, the command search is performed using a -default value of -.Va PATH -that is guaranteed to find all of the standard utilities. -. -.Pp -If the -.Fl v -option is specified, -.Ar utility -is not executed but a description of its interpretation by the shell is -printed. -For ordinary commands the output is the path name; for shell built-in -commands, shell functions and keywords only the name is written. -Aliases are printed as -.Dq Ic alias Ar name Ns = Ns Ar value . -. -.Pp -The -.Fl V -option is identical to -.Fl v -except for the output. -It prints -.Dq Ar utility Ic is Ar description -where -.Ar description -is either -the path name to -.Ar utility , -a special shell builtin, -a shell builtin, -a shell function, -a shell keyword -or -an alias for -.Ar value . -. -.It Ic continue Op Ar num -See the -.Sx Flow-Control Constructs -subsection. -. -.It Ic echo Oo Fl e | n Oc Op Ar string ... -Print a space-separated list of the arguments to the standard output -and append a newline character. -.Bl -tag -width indent -.It Fl n -Suppress the output of the trailing newline. -.It Fl e -Process C-style backslash escape sequences. -The -.Ic echo -command understands the following character escapes: -.Bl -tag -width indent -.It \ea -Alert (ring the terminal bell) -.It \eb -Backspace -.It \ec -Suppress the trailing newline (this has the side-effect of truncating the -line if it is not the last character) -.It \ee -The ESC character (ASCII 0x1b) -.It \ef -Formfeed -.It \en -Newline -.It \er -Carriage return -.It \et -Horizontal tab -.It \ev -Vertical tab -.It \e\e -Literal backslash -.It \e0nnn -(Zero) The character whose octal value is -.Ar nnn -.El -. -.Pp -If -.Ar string -is not enclosed in quotes then the backslash itself must be escaped -with a backslash to protect it from the shell. -For example -.Bd -literal -offset indent -$ echo -e "a\evb" -a - b -$ echo -e a\e\evb -a - b -$ echo -e "a\e\eb" -a\eb -$ echo -e a\e\e\e\eb -a\eb -.Ed -.El -. -.Pp -Only one of the -.Fl e -and -.Fl n -options may be specified. -. -.It Ic eval Ar string ... -Concatenate all the arguments with spaces. -Then re-parse and execute the command. -. -.It Ic exec Op Ar command Op arg ... -Unless -.Ar command -is omitted, -the shell process is replaced with the specified program -(which must be a real program, not a shell built-in command or function). -Any redirections on the -.Ic exec -command are marked as permanent, -so that they are not undone when the -.Ic exec -command finishes. -. -.It Ic exit Op Ar exitstatus -Terminate the shell process. -If -.Ar exitstatus -is given -it is used as the exit status of the shell. -Otherwise, if the shell is executing an -.Cm EXIT -trap, the exit status of the last command before the trap is used; -if the shell is executing a trap for a signal, -the shell exits by resending the signal to itself. -Otherwise, the exit status of the preceding command is used. -The exit status should be an integer between 0 and 255. -. -.It Ic export Ar name ... -.It Ic export Op Fl p -The specified names are exported so that they will -appear in the environment of subsequent commands. -The only way to un-export a variable is to -.Ic unset -it. -The shell allows the value of a variable to be set -at the same time as it is exported by writing -.Pp -.D1 Ic export Ar name Ns = Ns Ar value -.Pp -With no arguments the -.Ic export -command lists the names -of all exported variables. -If the -.Fl p -option is specified, the exported variables are printed as -.Dq Ic export Ar name Ns = Ns Ar value -lines, suitable for re-input to the shell. -. -.It Ic false -A null command that returns a non-zero (false) exit value. -. -.It Ic fc Oo Fl e Ar editor Oc Op Ar first Op Ar last -.It Ic fc Fl l Oo Fl nr Oc Op Ar first Op Ar last -.It Ic fc Fl s Oo Ar old Ns = Ns Ar new Oc Op Ar first -The -.Ic fc -built-in command lists, or edits and re-executes, -commands previously entered to an interactive shell. -. -.Bl -tag -width indent -.It Fl e Ar editor -Use the editor named by -.Ar editor -to edit the commands. -The -.Ar editor -string is a command name, -subject to search via the -.Va PATH -variable. -The value in the -.Va FCEDIT -variable is used as a default when -.Fl e -is not specified. -If -.Va FCEDIT -is null or unset, the value of the -.Va EDITOR -variable is used. -If -.Va EDITOR -is null or unset, -.Xr ed 1 -is used as the editor. -. -.It Fl l No (ell) -List the commands rather than invoking -an editor on them. -The commands are written in the -sequence indicated by the -.Ar first -and -.Ar last -operands, as affected by -.Fl r , -with each command preceded by the command number. -. -.It Fl n -Suppress command numbers when listing with -.Fl l . -. -.It Fl r -Reverse the order of the commands listed -(with -.Fl l ) -or edited -(with neither -.Fl l -nor -.Fl s ) . -. -.It Fl s -Re-execute the command without invoking an editor. -. -.It Ar old Ns = Ns Ar new -Replace the first occurrence of -.Ar old -in the command with -.Ar new . -If -.Ar old -is the empty string, -the command is prefixed with -.Ar new . -. -.It Ar first -.It Ar last -Select the commands to list or edit. -The number of previous commands that can be accessed -are determined by the value of the -.Va HISTSIZE -variable. -The value of -.Ar first -or -.Ar last -or both are one of the following: -. -.Bl -tag -width indent -.It Oo Cm + Oc Ns Ar num -A positive number representing a command number; -command numbers can be displayed with the -.Fl l -option. -. -.It Fl Ar num -A negative decimal number representing the -command that was executed -.Ar num -of -commands previously. -For example, \-1 is the immediately previous command. -. -.It Ar string -A string indicating the most recently entered command -that begins with that string. -If the -.Ar old Ns = Ns Ar new -operand is not also specified with -.Fl s , -the string form of the first operand cannot contain an embedded equal sign. -.El -.El -. -.Pp -The following variables affect the execution of -.Ic fc : -.Bl -tag -width ".Va HISTSIZE" -.It Va FCEDIT -Name of the editor to use for history editing. -.It Va HISTSIZE -The number of previous commands that are accessible. -.El -. -.It Ic fg Op Ar job -Move the specified -.Ar job -or the current job to the foreground. -. -.It Ic getopts Ar optstring var -The POSIX -.Ic getopts -command. -The -.Ic getopts -command deprecates the older -.Xr getopt 1 -command. -The first argument should be a series of letters, each possibly -followed by a colon which indicates that the option takes an argument. -The specified variable is set to the parsed option. -The index of -the next argument is placed into the shell variable -.Va OPTIND . -If an option takes an argument, it is placed into the shell variable -.Va OPTARG . -If an invalid option is encountered, -.Ar var -is set to -.Ql \&? . -It returns a false value (1) when it encounters the end of the options. -A new set of arguments may be parsed by assigning -.Li OPTIND=1 . -. -.It Ic hash Oo Fl rv Oc Op Ar command ... -The shell maintains a hash table which remembers the locations of commands. -With no arguments whatsoever, the -.Ic hash -command prints out the contents of this table. -. -.Pp -With arguments, the -.Ic hash -command removes each specified -.Ar command -from the hash table (unless they are functions) and then locates it. -With the -.Fl v -option, -.Ic hash -prints the locations of the commands as it finds them. -The -.Fl r -option causes the -.Ic hash -command to delete all the entries in the hash table except for functions. -. -.It Ic jobid Op Ar job -Print the process IDs of the processes in the specified -.Ar job . -If the -.Ar job -argument is omitted, use the current job. -. -.It Ic jobs Oo Fl lps Oc Op Ar job ... -Print information about the specified jobs, or all jobs if no -.Ar job -argument is given. -The information printed includes job ID, status and command name. -. -.Pp -If the -.Fl l -option is specified, the PID of each job is also printed. -If the -.Fl p -option is specified, only the process IDs for the process group leaders -are printed, one per line. -If the -.Fl s -option is specified, only the PIDs of the job commands are printed, one per -line. -. -.It Ic kill -A built-in equivalent of -.Xr kill 1 -that additionally supports sending signals to jobs. -This version is documented in -.Xr 1sh-kill 1 . -. -.It Ic local Oo Ar variable ... Oc Op Fl -See the -.Sx Functions -subsection. -. -.It Ic printf -A built-in equivalent of -.Xr printf 1 . -This version is documented in -.Xr 1sh-printf 1 . -. -.It Ic pwd Op Fl L | P -Print the path of the current directory. -The built-in command may -differ from the program of the same name because the -built-in command remembers what the current directory -is rather than recomputing it each time. -This makes -it faster. -However, if the current directory is -renamed, -the built-in version of -.Xr pwd 1 -will continue to print the old name for the directory. -. -.Pp -If the -.Fl P -option is specified, symbolic links are resolved. -If the -.Fl L -option is specified, the shell's notion of the current directory -is printed (symbolic links are not resolved). -This is the default. -. -.It Ic read Oo Fl p Ar prompt Oc Oo -.Fl t Ar timeout Oc Oo Fl er Oc Ar variable ... -The -.Ar prompt -is printed if the -.Fl p -option is specified -and the standard input is a terminal. -Then a line is -read from the standard input. -The trailing newline -is deleted from the line and the line is split as -described in the section on -.Sx White Space Splitting (Field Splitting)\& -above, and -the pieces are assigned to the variables in order. -If there are more pieces than variables, the remaining -pieces (along with the characters in -.Va IFS -that separated them) -are assigned to the last variable. -If there are more variables than pieces, the remaining -variables are assigned the null string. -. -.Pp -Backslashes are treated specially, unless the -.Fl r -option is -specified. -If a backslash is followed by -a newline, the backslash and the newline will be -deleted. -If a backslash is followed by any other -character, the backslash will be deleted and the following -character will be treated as though it were not in -.Va IFS , -even if it is. -. -.Pp -If the -.Fl t -option is specified and the -.Ar timeout -elapses before a complete line of input is supplied, -the -.Ic read -command will return an exit status as if terminated by -.Dv SIGALRM -without assigning any values. -The -.Ar timeout -value may optionally be followed by one of -.Ql s , -.Ql m -or -.Ql h -to explicitly specify seconds, minutes or hours. -If none is supplied, -.Ql s -is assumed. -. -.Pp -The -.Fl e -option exists only for backward compatibility with older scripts. -. -.Pp -The exit status is 0 on success, 1 on end of file, -between 2 and 128 if an error occurs -and greater than 128 if a trapped signal interrupts -.Ic read . -. -.It Ic readonly Oo Fl p Oc Op Ar name ... -Each specified -.Ar name -is marked as read only, -so that it cannot be subsequently modified or unset. -The shell allows the value of a variable to be set -at the same time as it is marked read only -by using the following form: -.Pp -.D1 Ic readonly Ar name Ns = Ns Ar value -.Pp -With no arguments the -.Ic readonly -command lists the names of all read only variables. -If the -.Fl p -option is specified, the read-only variables are printed as -.Dq Ic readonly Ar name Ns = Ns Ar value -lines, suitable for re-input to the shell. -. -.It Ic return Op Ar exitstatus -See the -.Sx Functions -subsection. -. -.It Ic set Oo Fl /+abCEefIimnpTuVvx Oc Oo Fl /+o Ar longname Oc Oo -.Fl c Ar string Oc Op Fl - Ar arg ... -The -.Ic set -command performs three different functions: -. -.Bl -item -.It -With no arguments, it lists the values of all shell variables. -. -.It -If options are given, -either in short form or using the long -.Dq Fl /+o Ar longname -form, -it sets or clears the specified options as described in the section called -.Sx Argument List Processing . -. -.It -If the -.Dq Fl - -option is specified, -.Ic set -will replace the shell's positional parameters with the subsequent -arguments. -If no arguments follow the -.Dq Fl - -option, -all the positional parameters will be cleared, -which is equivalent to executing the command -.Dq Li "shift $#" . -The -.Dq Fl - -flag may be omitted when specifying arguments to be used -as positional replacement parameters. -This is not recommended, -because the first argument may begin with a dash -.Pq Ql - -or a plus -.Pq Ql + , -which the -.Ic set -command will interpret as a request to enable or disable options. -.El -. -.It Ic setvar Ar variable value -Assigns the specified -.Ar value -to the specified -.Ar variable . -The -.Ic setvar -command is intended to be used in functions that -assign values to variables whose names are passed as parameters. -In general it is better to write -.Dq Ar variable Ns = Ns Ar value -rather than using -.Ic setvar . -. -.It Ic shift Op Ar n -Shift the positional parameters -.Ar n -times, or once if -.Ar n -is not specified. -A shift sets the value of -.Li $1 -to the value of -.Li $2 , -the value of -.Li $2 -to the value of -.Li $3 , -and so on, -decreasing the value of -.Li $# -by one. -For portability, shifting if there are zero positional parameters -should be avoided, since the shell may abort. -. -.It Ic test -A built-in equivalent of -.Xr test 1 . -This version is documented in -.Xr 1sh-test 1 . -. -.It Ic times -Print the amount of time spent executing the shell process and its children. -The first output line shows the user and system times for the shell process -itself, the second one contains the user and system times for the -children. -. -.It Ic trap Oo Ar action Oc Ar signal ... -.It Ic trap Fl l -Cause the shell to parse and execute -.Ar action -when any specified -.Ar signal -is received. -The signals are specified by name or number. -In addition, the pseudo-signal -.Cm EXIT -may be used to specify an -.Ar action -that is performed when the shell terminates. -The -.Ar action -may be an empty string or a dash -.Pq Ql - ; -the former causes the specified signal to be ignored -and the latter causes the default action to be taken. -Omitting the -.Ar action -and using only signal numbers is another way to request the default action. -In a subshell or utility environment, -the shell resets trapped (but not ignored) signals to the default action. -The -.Ic trap -command has no effect on signals that were ignored on entry to the shell. -. -.Pp -Option -.Fl l -causes the -.Ic trap -command to display a list of valid signal names. -. -.It Ic true -A null command that returns a 0 (true) exit value. -. -.It Ic type Op Ar name ... -Interpret each -.Ar name -as a command and print the resolution of the command search. -Possible resolutions are: -shell keyword, alias, special shell builtin, shell builtin, command, -tracked alias -and not found. -For aliases the alias expansion is printed; -for commands and tracked aliases -the complete pathname of the command is printed. -. -.It Ic ulimit Oo Fl HSabcdfklmnopstuvw Oc Op Ar limit -Set or display resource limits (see -.Xr getrlimit 2 ) . -If -.Ar limit -is specified, the named resource will be set; -otherwise the current resource value will be displayed. -. -.Pp -If -.Fl H -is specified, the hard limits will be set or displayed. -While everybody is allowed to reduce a hard limit, -only the superuser can increase it. -The -.Fl S -option -specifies the soft limits instead. -When displaying limits, -only one of -.Fl S -or -.Fl H -can be given. -The default is to display the soft limits, -and to set both the hard and the soft limits. -. -.Pp -Option -.Fl a -causes the -.Ic ulimit -command to display all resources. -The parameter -.Ar limit -is not acceptable in this mode. -. -.Pp -The remaining options specify which resource value is to be -displayed or modified. -They are mutually exclusive. -.Bl -tag -width indent -.It Fl b Ar sbsize -The maximum size of socket buffer usage, in bytes. -.It Fl c Ar coredumpsize -The maximal size of core dump files, in 512-byte blocks. -Setting -.Ar coredumpsize -to 0 prevents core dump files from being created. -.It Fl d Ar datasize -The maximal size of the data segment of a process, in kilobytes. -.It Fl f Ar filesize -The maximal size of a file, in 512-byte blocks. -.It Fl k Ar kqueues -The maximal number of kqueues -(see -.Xr kqueue 2 ) -for this user ID. -.It Fl l Ar lockedmem -The maximal size of memory that can be locked by a process, in -kilobytes. -.It Fl m Ar memoryuse -The maximal resident set size of a process, in kilobytes. -.It Fl n Ar nofiles -The maximal number of descriptors that could be opened by a process. -.It Fl o Ar umtxp -The maximal number of process-shared locks -(see -.Xr pthread 3 ) -for this user ID. -.It Fl p Ar pseudoterminals -The maximal number of pseudo-terminals for this user ID. -.It Fl s Ar stacksize -The maximal size of the stack segment, in kilobytes. -.It Fl t Ar time -The maximal amount of CPU time to be used by each process, in seconds. -.It Fl u Ar userproc -The maximal number of simultaneous processes for this user ID. -.It Fl v Ar virtualmem -The maximal virtual size of a process, in kilobytes. -.It Fl w Ar swapuse -The maximum amount of swap space reserved or used for this user ID, -in kilobytes. -.El -. -.It Ic umask Oo Fl S Oc Op Ar mask -Set the file creation mask (see -.Xr umask 2 ) -to the octal or symbolic (see -.Xr chmod 1 ) -value specified by -.Ar mask . -If the argument is omitted, the current mask value is printed. -If the -.Fl S -option is specified, the output is symbolic, otherwise the output is octal. -. -.It Ic unalias Oo Fl a Oc Op Ar name ... -The specified alias names are removed. -If -.Fl a -is specified, all aliases are removed. -. -.It Ic unset Oo Fl fv Oc Ar name ... -The specified variables or functions are unset and unexported. -If the -.Fl v -option is specified or no options are given, the -.Ar name -arguments are treated as variable names. -If the -.Fl f -option is specified, the -.Ar name -arguments are treated as function names. -. -.It Ic wait Op Ar job ... -Wait for each specified -.Ar job -to complete and return the exit status of the last process in the -last specified -.Ar job . -If any -.Ar job -specified is unknown to the shell, it is treated as if it -were a known job that exited with exit status 127. -If no operands are given, wait for all jobs to complete -and return an exit status of zero. -.El -. -.Ss Command Line Editing -When -.Nm -is being used interactively from a terminal, the current command -and the command history -(see -.Ic fc -in -.Sx Built-in Commands ) -can be edited using -.Nm vi Ns -mode -command line editing. -This mode uses commands similar -to a subset of those described in the -.Xr vi 1 -man page. -The command -.Dq Li "set -o vi" -(or -.Dq Li "set -V" ) -enables -.Nm vi Ns -mode -editing and places -.Nm -into -.Nm vi -insert mode. -With -.Nm vi Ns -mode -enabled, -.Nm -can be switched between insert mode and command mode by typing -.Aq ESC . -Hitting -.Aq return -while in command mode will pass the line to the shell. -. -.Pp -Similarly, the -.Dq Li "set -o emacs" -(or -.Dq Li "set -E" ) -command can be used to enable a subset of -.Nm emacs Ns -style -command line editing features. -. -.Sh ENVIRONMENT -The following environment variables affect the execution of -.Nm : -. -.Bl -tag -width ".Ev LANGXXXXXX" -.It Ev ENV -Initialization file for interactive shells. -. -.It Ev LANG , Ev LC_* -Locale settings. -These are inherited by children of the shell, -and is used in a limited manner by the shell itself. -. -.It Ev OLDPWD -The previous current directory. -This is used and updated by -.Ic cd . -. -.It Ev PWD -An absolute pathname for the current directory, -possibly containing symbolic links. -This is used and updated by the shell. -. -.It Ev TERM -The default terminal setting for the shell. -This is inherited by children of the shell, and is used in the history -editing modes. -.El -. -.Pp -Additionally, environment variables are turned into shell variables -at startup, -which may affect the shell as described under -.Sx Special Variables . -. -.Sh FILES -.Bl -tag -width "/etc/suid_profileXX" -compact -.It Pa ~/.profile -User's login profile. -.It Pa /etc/profile -System login profile. -.It Pa /etc/shells -Shell database. -.It Pa /etc/suid_profile -Privileged shell profile. -.El -. -.Sh EXIT STATUS -Errors that are detected by the shell, such as a syntax error, will -cause the shell to exit with a non-zero exit status. -If the shell is not an interactive shell, the execution of the shell -file will be aborted. -Otherwise the shell will return the exit status of the last command -executed, or if the -.Ic exit -builtin is used with a numeric argument, it -will return the argument. -. -.Sh SEE ALSO -.Xr 1sh-kill 1 , -.Xr 1sh-printf 1 , -.Xr 1sh-test 1 , -.Xr builtin 1 , -.Xr chsh 1 , -.Xr echo 1 , -.Xr ed 1 , -.Xr emacs 1 , -.Xr pwd 1 , -.Xr vi 1 , -.Xr execve 2 , -.Xr getrlimit 2 , -.Xr umask 2 , -.Xr wctype 3 , -.Xr editrc 5 , -.Xr shells 5 -. -.Sh HISTORY -A -.Xr sh 1 -command, the Thompson shell, appeared in -.At v1 . -It was superseded in -.At v7 -by the Bourne shell, which inherited the name -.Xr sh 1 . -. -.Pp -The -.Fx -version of -.Xr sh 1 -was rewritten in 1989 under the -.Bx -license after the Bourne shell from -.At V.4 . -. -.Pp -The -.Nm -sources were imported from -.Fx 12.0 -.Xr sh 1 . -Bundled -.Xr editline 3 -sources were imported from -.Nx 8.0 . -. -.Ss Differences from sh -.Bl -bullet -compact -.It -History is saved with -.Va HISTFILE . -.It -Further prompt customization with -.Va PS0 , -.Va RPS1 , -.Va RPS2 . -.It -.Va HOME -is shortened to -.Sq ~ -in prompt expansion. -.It -Exit status prompt expansion. -.It -.Ic fc Fl s Ar = Ns Ar new -prefixes commands. -.El -. -.Sh AUTHORS -.An -nosplit -The -.Fx -version of -.Xr sh 1 -was originally written by -.An Kenneth Almquist . -. -.Pp -The -.Nm -utility is developed by -.An C. McEnroe Aq Mt june@causal.agency . -. -.Sh BUGS -The -.Nm -utility does not recognize multibyte characters other than UTF-8. -Splitting using -.Va IFS -does not recognize multibyte characters. diff --git a/bin/1sh/Makefile b/bin/1sh/Makefile deleted file mode 100644 index afd0350b..00000000 --- a/bin/1sh/Makefile +++ /dev/null @@ -1,88 +0,0 @@ -PREFIX = /usr/local -MANDIR = ${PREFIX}/share/man - -CFLAGS += -std=c99 -Wall -Wextra -DSHELL -LDLIBS = -ledit - --include config.mk - -SRCS += alias.c -SRCS += arith_yacc.c -SRCS += arith_yylex.c -SRCS += cd.c -SRCS += echo.c -SRCS += error.c -SRCS += eval.c -SRCS += exec.c -SRCS += expand.c -SRCS += histedit.c -SRCS += input.c -SRCS += jobs.c -SRCS += kill.c -SRCS += mail.c -SRCS += main.c -SRCS += memalloc.c -SRCS += miscbltin.c -SRCS += mystring.c -SRCS += options.c -SRCS += output.c -SRCS += parser.c -SRCS += printf.c -SRCS += redir.c -SRCS += show.c -SRCS += test.c -SRCS += trap.c -SRCS += var.c - -GENSRCS = builtins.c nodes.c syntax.c -GENHDRS = builtins.h nodes.h syntax.h token.h - -SRCS += ${GENSRCS} -OBJS = ${SRCS:.c=.o} - -MANS = 1sh.1 1sh-kill.1 1sh-printf.1 1sh-test.1 - -all: tags 1sh - -1sh: ${OBJS} - ${CC} ${LDFLAGS} ${OBJS} ${LDLIBS} -o $@ - -${OBJS}: ${GENHDRS} - -builtins.c builtins.h: mkbuiltins builtins.def - sh mkbuiltins . - -nodes.c nodes.h: mknodes nodetypes nodes.c.pat - ./mknodes nodetypes nodes.c.pat - -syntax.c syntax.h: mksyntax - ./mksyntax - -token.h: mktokens - sh mktokens - -tags: *.h *.c - ctags -w *.h *.c - -depend: ${SRCS} ${GENHDRS} - ${CC} ${CFLAGS} -MM ${SRCS} > .depend - --include .depend - -clean: - rm -f 1sh ${OBJS} mknodes mksyntax ${GENSRCS} ${GENHDRS} tags .depend - -install: 1sh ${MANS} - install -d ${PREFIX}/bin ${MANDIR}/man1 - install 1sh ${PREFIX}/bin - install -m 644 ${MANS} ${MANDIR}/man1 - -uninstall: - rm -f ${PREFIX}/bin/1sh ${MANS:%=${MANDIR}/man1/%} - -shell: - grep -q '^${PREFIX}/bin/1sh$$' /etc/shells \ - || echo '${PREFIX}/bin/1sh' >> /etc/shells - -unshell: - sed -i sed '\;^${PREFIX}/bin/1sh$$;d' /etc/shells diff --git a/bin/1sh/TOUR b/bin/1sh/TOUR deleted file mode 100644 index 68330af0..00000000 --- a/bin/1sh/TOUR +++ /dev/null @@ -1,301 +0,0 @@ -# @(#)TOUR 8.1 (Berkeley) 5/31/93 -# $FreeBSD: releng/12.0/bin/sh/TOUR 317882 2017-05-06 13:28:42Z jilles $ - -NOTE -- This is the original TOUR paper distributed with ash and -does not represent the current state of the shell. It is provided anyway -since it provides helpful information for how the shell is structured, -but be warned that things have changed -- the current shell is -still under development. - -================================================================ - - A Tour through Ash - - Copyright 1989 by Kenneth Almquist. - - -DIRECTORIES: The subdirectory bltin contains commands which can -be compiled stand-alone. The rest of the source is in the main -ash directory. - -SOURCE CODE GENERATORS: Files whose names begin with "mk" are -programs that generate source code. A complete list of these -programs is: - - program input files generates - ------- ----------- --------- - mkbuiltins builtins.def builtins.h builtins.c - mknodes nodetypes nodes.h nodes.c - mksyntax - syntax.h syntax.c - mktokens - token.h - -There are undoubtedly too many of these. - -EXCEPTIONS: Code for dealing with exceptions appears in -exceptions.c. The C language doesn't include exception handling, -so I implement it using setjmp and longjmp. The global variable -exception contains the type of exception. EXERROR is raised by -calling error. EXINT is an interrupt. - -INTERRUPTS: In an interactive shell, an interrupt will cause an -EXINT exception to return to the main command loop. (Exception: -EXINT is not raised if the user traps interrupts using the trap -command.) The INTOFF and INTON macros (defined in exception.h) -provide uninterruptible critical sections. Between the execution -of INTOFF and the execution of INTON, interrupt signals will be -held for later delivery. INTOFF and INTON can be nested. - -MEMALLOC.C: Memalloc.c defines versions of malloc and realloc -which call error when there is no memory left. It also defines a -stack oriented memory allocation scheme. Allocating off a stack -is probably more efficient than allocation using malloc, but the -big advantage is that when an exception occurs all we have to do -to free up the memory in use at the time of the exception is to -restore the stack pointer. The stack is implemented using a -linked list of blocks. - -STPUTC: If the stack were contiguous, it would be easy to store -strings on the stack without knowing in advance how long the -string was going to be: - p = stackptr; - *p++ = c; /* repeated as many times as needed */ - stackptr = p; -The following three macros (defined in memalloc.h) perform these -operations, but grow the stack if you run off the end: - STARTSTACKSTR(p); - STPUTC(c, p); /* repeated as many times as needed */ - grabstackstr(p); - -We now start a top-down look at the code: - -MAIN.C: The main routine performs some initialization, executes -the user's profile if necessary, and calls cmdloop. Cmdloop -repeatedly parses and executes commands. - -OPTIONS.C: This file contains the option processing code. It is -called from main to parse the shell arguments when the shell is -invoked, and it also contains the set builtin. The -i and -m op- -tions (the latter turns on job control) require changes in signal -handling. The routines setjobctl (in jobs.c) and setinteractive -(in trap.c) are called to handle changes to these options. - -PARSING: The parser code is all in parser.c. A recursive des- -cent parser is used. Syntax tables (generated by mksyntax) are -used to classify characters during lexical analysis. There are -four tables: one for normal use, one for use when inside single -quotes and dollar single quotes, one for use when inside double -quotes and one for use in arithmetic. The tables are machine -dependent because they are indexed by character variables and -the range of a char varies from machine to machine. - -PARSE OUTPUT: The output of the parser consists of a tree of -nodes. The various types of nodes are defined in the file node- -types. - -Nodes of type NARG are used to represent both words and the con- -tents of here documents. An early version of ash kept the con- -tents of here documents in temporary files, but keeping here do- -cuments in memory typically results in significantly better per- -formance. It would have been nice to make it an option to use -temporary files for here documents, for the benefit of small -machines, but the code to keep track of when to delete the tem- -porary files was complex and I never fixed all the bugs in it. -(AT&T has been maintaining the Bourne shell for more than ten -years, and to the best of my knowledge they still haven't gotten -it to handle temporary files correctly in obscure cases.) - -The text field of a NARG structure points to the text of the -word. The text consists of ordinary characters and a number of -special codes defined in parser.h. The special codes are: - - CTLVAR Parameter expansion - CTLENDVAR End of parameter expansion - CTLBACKQ Command substitution - CTLBACKQ|CTLQUOTE Command substitution inside double quotes - CTLARI Arithmetic expansion - CTLENDARI End of arithmetic expansion - CTLESC Escape next character - -A variable substitution contains the following elements: - - CTLVAR type name '=' [ alternative-text CTLENDVAR ] - -The type field is a single character specifying the type of sub- -stitution. The possible types are: - - VSNORMAL $var - VSMINUS ${var-text} - VSMINUS|VSNUL ${var:-text} - VSPLUS ${var+text} - VSPLUS|VSNUL ${var:+text} - VSQUESTION ${var?text} - VSQUESTION|VSNUL ${var:?text} - VSASSIGN ${var=text} - VSASSIGN|VSNUL ${var:=text} - VSTRIMLEFT ${var#text} - VSTRIMLEFTMAX ${var##text} - VSTRIMRIGHT ${var%text} - VSTRIMRIGHTMAX ${var%%text} - VSLENGTH ${#var} - VSERROR delayed error - -In addition, the type field will have the VSQUOTE flag set if the -variable is enclosed in double quotes and the VSLINENO flag if -LINENO is being expanded (the parameter name is the decimal line -number). The parameter's name comes next, terminated by an equals -sign. If the type is not VSNORMAL (including when it is VSLENGTH), -then the text field in the substitution follows, terminated by a -CTLENDVAR byte. - -The type VSERROR is used to allow parsing bad substitutions like -${var[7]} and generate an error when they are expanded. - -Commands in back quotes are parsed and stored in a linked list. -The locations of these commands in the string are indicated by -CTLBACKQ and CTLBACKQ+CTLQUOTE characters, depending upon whether -the back quotes were enclosed in double quotes. - -Arithmetic expansion starts with CTLARI and ends with CTLENDARI. - -The character CTLESC escapes the next character, so that in case -any of the CTL characters mentioned above appear in the input, -they can be passed through transparently. CTLESC is also used to -escape '*', '?', '[', and '!' characters which were quoted by the -user and thus should not be used for file name generation. - -CTLESC characters have proved to be particularly tricky to get -right. In the case of here documents which are not subject to -variable and command substitution, the parser doesn't insert any -CTLESC characters to begin with (so the contents of the text -field can be written without any processing). Other here docu- -ments, and words which are not subject to file name generation, -have the CTLESC characters removed during the variable and command -substitution phase. Words which are subject to file name -generation have the CTLESC characters removed as part of the file -name phase. - -EXECUTION: Command execution is handled by the following files: - eval.c The top level routines. - redir.c Code to handle redirection of input and output. - jobs.c Code to handle forking, waiting, and job control. - exec.c Code to do path searches and the actual exec sys call. - expand.c Code to evaluate arguments. - var.c Maintains the variable symbol table. Called from expand.c. - -EVAL.C: Evaltree recursively executes a parse tree. The exit -status is returned in the global variable exitstatus. The alter- -native entry evalbackcmd is called to evaluate commands in back -quotes. It saves the result in memory if the command is a buil- -tin; otherwise it forks off a child to execute the command and -connects the standard output of the child to a pipe. - -JOBS.C: To create a process, you call makejob to return a job -structure, and then call forkshell (passing the job structure as -an argument) to create the process. Waitforjob waits for a job -to complete. These routines take care of process groups if job -control is defined. - -REDIR.C: Ash allows file descriptors to be redirected and then -restored without forking off a child process. This is accom- -plished by duplicating the original file descriptors. The redir- -tab structure records where the file descriptors have been dupli- -cated to. - -EXEC.C: The routine find_command locates a command, and enters -the command in the hash table if it is not already there. The -third argument specifies whether it is to print an error message -if the command is not found. (When a pipeline is set up, -find_command is called for all the commands in the pipeline be- -fore any forking is done, so to get the commands into the hash -table of the parent process. But to make command hashing as -transparent as possible, we silently ignore errors at that point -and only print error messages if the command cannot be found -later.) - -The routine shellexec is the interface to the exec system call. - -EXPAND.C: As the routine argstr generates words by parameter -expansion, command substitution and arithmetic expansion, it -performs word splitting on the result. As each word is output, -the routine expandmeta performs file name generation (if enabled). - -VAR.C: Variables are stored in a hash table. Probably we should -switch to extensible hashing. The variable name is stored in the -same string as the value (using the format "name=value") so that -no string copying is needed to create the environment of a com- -mand. Variables which the shell references internally are preal- -located so that the shell can reference the values of these vari- -ables without doing a lookup. - -When a program is run, the code in eval.c sticks any environment -variables which precede the command (as in "PATH=xxx command") in -the variable table as the simplest way to strip duplicates, and -then calls "environment" to get the value of the environment. - -BUILTIN COMMANDS: The procedures for handling these are scat- -tered throughout the code, depending on which location appears -most appropriate. They can be recognized because their names al- -ways end in "cmd". The mapping from names to procedures is -specified in the file builtins.def, which is processed by the -mkbuiltins command. - -A builtin command is invoked with argc and argv set up like a -normal program. A builtin command is allowed to overwrite its -arguments. Builtin routines can call nextopt to do option pars- -ing. This is kind of like getopt, but you don't pass argc and -argv to it. Builtin routines can also call error. This routine -normally terminates the shell (or returns to the main command -loop if the shell is interactive), but when called from a non- -special builtin command it causes the builtin command to -terminate with an exit status of 2. - -The directory bltins contains commands which can be compiled in- -dependently but can also be built into the shell for efficiency -reasons. The header file bltin.h takes care of most of the -differences between the ash and the stand-alone environment. -The user should call the main routine "main", and #define main to -be the name of the routine to use when the program is linked into -ash. This #define should appear before bltin.h is included; -bltin.h will #undef main if the program is to be compiled -stand-alone. A similar approach is used for a few utilities from -bin and usr.bin. - -CD.C: This file defines the cd and pwd builtins. - -SIGNALS: Trap.c implements the trap command. The routine set- -signal figures out what action should be taken when a signal is -received and invokes the signal system call to set the signal ac- -tion appropriately. When a signal that a user has set a trap for -is caught, the routine "onsig" sets a flag. The routine dotrap -is called at appropriate points to actually handle the signal. -When an interrupt is caught and no trap has been set for that -signal, the routine "onint" in error.c is called. - -OUTPUT: Ash uses its own output routines. There are three out- -put structures allocated. "Output" represents the standard out- -put, "errout" the standard error, and "memout" contains output -which is to be stored in memory. This last is used when a buil- -tin command appears in backquotes, to allow its output to be col- -lected without doing any I/O through the UNIX operating system. -The variables out1 and out2 normally point to output and errout, -respectively, but they are set to point to memout when appropri- -ate inside backquotes. - -INPUT: The basic input routine is pgetc, which reads from the -current input file. There is a stack of input files; the current -input file is the top file on this stack. The code allows the -input to come from a string rather than a file. (This is for the --c option and the "." and eval builtin commands.) The global -variable plinno is saved and restored when files are pushed and -popped from the stack. The parser routines store the number of -the current line in this variable. - -DEBUGGING: If DEBUG is defined in shell.h, then the shell will -write debugging information to the file $HOME/trace. Most of -this is done using the TRACE macro, which takes a set of printf -arguments inside two sets of parenthesis. Example: -"TRACE(("n=%d0, n))". The double parenthesis are necessary be- -cause the preprocessor can't handle functions with a variable -number of arguments. Defining DEBUG also causes the shell to -generate a core dump if it is sent a quit signal. The tracing -code is in show.c. diff --git a/bin/1sh/alias.c b/bin/1sh/alias.c deleted file mode 100644 index 593e7457..00000000 --- a/bin/1sh/alias.c +++ /dev/null @@ -1,256 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)alias.c 8.3 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/alias.c 317039 2017-04-16 22:10:02Z jilles $"); - -#include <stdlib.h> -#include "shell.h" -#include "output.h" -#include "error.h" -#include "memalloc.h" -#include "mystring.h" -#include "alias.h" -#include "options.h" -#include "builtins.h" - -#define ATABSIZE 39 - -static struct alias *atab[ATABSIZE]; -static int aliases; - -static void setalias(const char *, const char *); -static int unalias(const char *); -static struct alias **hashalias(const char *); - -static -void -setalias(const char *name, const char *val) -{ - struct alias *ap, **app; - - unalias(name); - app = hashalias(name); - INTOFF; - ap = ckmalloc(sizeof (struct alias)); - ap->name = savestr(name); - ap->val = savestr(val); - ap->flag = 0; - ap->next = *app; - *app = ap; - aliases++; - INTON; -} - -static void -freealias(struct alias *ap) -{ - ckfree(ap->name); - ckfree(ap->val); - ckfree(ap); -} - -static int -unalias(const char *name) -{ - struct alias *ap, **app; - - app = hashalias(name); - - for (ap = *app; ap; app = &(ap->next), ap = ap->next) { - if (equal(name, ap->name)) { - /* - * if the alias is currently in use (i.e. its - * buffer is being used by the input routine) we - * just null out the name instead of freeing it. - * We could clear it out later, but this situation - * is so rare that it hardly seems worth it. - */ - if (ap->flag & ALIASINUSE) - *ap->name = '\0'; - else { - INTOFF; - *app = ap->next; - freealias(ap); - INTON; - } - aliases--; - return (0); - } - } - - return (1); -} - -static void -rmaliases(void) -{ - struct alias *ap, **app; - int i; - - INTOFF; - for (i = 0; i < ATABSIZE; i++) { - app = &atab[i]; - while (*app) { - ap = *app; - if (ap->flag & ALIASINUSE) { - *ap->name = '\0'; - app = &(*app)->next; - } else { - *app = ap->next; - freealias(ap); - } - } - } - aliases = 0; - INTON; -} - -struct alias * -lookupalias(const char *name, int check) -{ - struct alias *ap; - - if (aliases == 0) - return (NULL); - for (ap = *hashalias(name); ap; ap = ap->next) { - if (equal(name, ap->name)) { - if (check && (ap->flag & ALIASINUSE)) - return (NULL); - return (ap); - } - } - - return (NULL); -} - -static int -comparealiases(const void *p1, const void *p2) -{ - const struct alias *const *a1 = p1; - const struct alias *const *a2 = p2; - - return strcmp((*a1)->name, (*a2)->name); -} - -static void -printalias(const struct alias *a) -{ - out1fmt("%s=", a->name); - out1qstr(a->val); - out1c('\n'); -} - -static void -printaliases(void) -{ - int i, j; - struct alias **sorted, *ap; - - INTOFF; - sorted = ckmalloc(aliases * sizeof(*sorted)); - j = 0; - for (i = 0; i < ATABSIZE; i++) - for (ap = atab[i]; ap; ap = ap->next) - if (*ap->name != '\0') - sorted[j++] = ap; - qsort(sorted, aliases, sizeof(*sorted), comparealiases); - for (i = 0; i < aliases; i++) { - printalias(sorted[i]); - if (int_pending()) - break; - } - ckfree(sorted); - INTON; -} - -int -aliascmd(int argc __unused, char **argv __unused) -{ - char *n, *v; - int ret = 0; - struct alias *ap; - - nextopt(""); - - if (*argptr == NULL) { - printaliases(); - return (0); - } - while ((n = *argptr++) != NULL) { - if ((v = strchr(n+1, '=')) == NULL) /* n+1: funny ksh stuff */ - if ((ap = lookupalias(n, 0)) == NULL) { - warning("%s: not found", n); - ret = 1; - } else - printalias(ap); - else { - *v++ = '\0'; - setalias(n, v); - } - } - - return (ret); -} - -int -unaliascmd(int argc __unused, char **argv __unused) -{ - int i; - - while ((i = nextopt("a")) != '\0') { - if (i == 'a') { - rmaliases(); - return (0); - } - } - for (i = 0; *argptr; argptr++) - i |= unalias(*argptr); - - return (i); -} - -static struct alias ** -hashalias(const char *p) -{ - unsigned int hashval; - - hashval = (unsigned char)*p << 4; - while (*p) - hashval+= *p++; - return &atab[hashval % ATABSIZE]; -} diff --git a/bin/1sh/alias.h b/bin/1sh/alias.h deleted file mode 100644 index 837f1305..00000000 --- a/bin/1sh/alias.h +++ /dev/null @@ -1,45 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)alias.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/alias.h 314436 2017-02-28 23:42:47Z imp $ - */ - -#define ALIASINUSE 1 - -struct alias { - struct alias *next; - char *name; - char *val; - int flag; -}; - -struct alias *lookupalias(const char *, int); diff --git a/bin/1sh/arith.h b/bin/1sh/arith.h deleted file mode 100644 index 364092fa..00000000 --- a/bin/1sh/arith.h +++ /dev/null @@ -1,37 +0,0 @@ -/*- - * Copyright (c) 1995 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)arith.h 1.1 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/arith.h 315511 2017-03-18 20:41:07Z jilles $ - */ - -#include "shell.h" - -#define DIGITS(var) (3 + (2 + CHAR_BIT * sizeof((var))) / 3) - -arith_t arith(const char *); diff --git a/bin/1sh/arith_yacc.c b/bin/1sh/arith_yacc.c deleted file mode 100644 index 604096aa..00000000 --- a/bin/1sh/arith_yacc.c +++ /dev/null @@ -1,381 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * Copyright (c) 2007 - * Herbert Xu <herbert@gondor.apana.org.au>. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/arith_yacc.c 270246 2014-08-20 20:15:43Z jilles $"); - -#include <limits.h> -#include <errno.h> -#include <inttypes.h> -#include <stdlib.h> -#include <stdio.h> -#include "arith.h" -#include "arith_yacc.h" -#include "expand.h" -#include "shell.h" -#include "error.h" -#include "memalloc.h" -#include "output.h" -#include "options.h" -#include "var.h" - -#if ARITH_BOR + 11 != ARITH_BORASS || ARITH_ASS + 11 != ARITH_EQ -#error Arithmetic tokens are out of order. -#endif - -static const char *arith_startbuf; - -const char *arith_buf; -union yystype yylval; - -static int last_token; - -#define ARITH_PRECEDENCE(op, prec) [op - ARITH_BINOP_MIN] = prec - -static const char prec[ARITH_BINOP_MAX - ARITH_BINOP_MIN] = { - ARITH_PRECEDENCE(ARITH_MUL, 0), - ARITH_PRECEDENCE(ARITH_DIV, 0), - ARITH_PRECEDENCE(ARITH_REM, 0), - ARITH_PRECEDENCE(ARITH_ADD, 1), - ARITH_PRECEDENCE(ARITH_SUB, 1), - ARITH_PRECEDENCE(ARITH_LSHIFT, 2), - ARITH_PRECEDENCE(ARITH_RSHIFT, 2), - ARITH_PRECEDENCE(ARITH_LT, 3), - ARITH_PRECEDENCE(ARITH_LE, 3), - ARITH_PRECEDENCE(ARITH_GT, 3), - ARITH_PRECEDENCE(ARITH_GE, 3), - ARITH_PRECEDENCE(ARITH_EQ, 4), - ARITH_PRECEDENCE(ARITH_NE, 4), - ARITH_PRECEDENCE(ARITH_BAND, 5), - ARITH_PRECEDENCE(ARITH_BXOR, 6), - ARITH_PRECEDENCE(ARITH_BOR, 7), -}; - -#define ARITH_MAX_PREC 8 - -int letcmd(int, char **); - -static __dead2 void yyerror(const char *s) -{ - error("arithmetic expression: %s: \"%s\"", s, arith_startbuf); - /* NOTREACHED */ -} - -static arith_t arith_lookupvarint(char *varname) -{ - const char *str; - char *p; - arith_t result; - - str = lookupvar(varname); - if (uflag && str == NULL) - yyerror("variable not set"); - if (str == NULL || *str == '\0') - str = "0"; - errno = 0; - result = strtoarith_t(str, &p, 0); - if (errno != 0 || *p != '\0') - yyerror("variable conversion error"); - return result; -} - -static inline int arith_prec(int op) -{ - return prec[op - ARITH_BINOP_MIN]; -} - -static inline int higher_prec(int op1, int op2) -{ - return arith_prec(op1) < arith_prec(op2); -} - -static arith_t do_binop(int op, arith_t a, arith_t b) -{ - - switch (op) { - default: - case ARITH_REM: - case ARITH_DIV: - if (!b) - yyerror("division by zero"); - if (a == ARITH_MIN && b == -1) - yyerror("divide error"); - return op == ARITH_REM ? a % b : a / b; - case ARITH_MUL: - return (uintmax_t)a * (uintmax_t)b; - case ARITH_ADD: - return (uintmax_t)a + (uintmax_t)b; - case ARITH_SUB: - return (uintmax_t)a - (uintmax_t)b; - case ARITH_LSHIFT: - return (uintmax_t)a << (b & (sizeof(uintmax_t) * CHAR_BIT - 1)); - case ARITH_RSHIFT: - return a >> (b & (sizeof(uintmax_t) * CHAR_BIT - 1)); - case ARITH_LT: - return a < b; - case ARITH_LE: - return a <= b; - case ARITH_GT: - return a > b; - case ARITH_GE: - return a >= b; - case ARITH_EQ: - return a == b; - case ARITH_NE: - return a != b; - case ARITH_BAND: - return a & b; - case ARITH_BXOR: - return a ^ b; - case ARITH_BOR: - return a | b; - } -} - -static arith_t assignment(int var, int noeval); - -static arith_t primary(int token, union yystype *val, int op, int noeval) -{ - arith_t result; - -again: - switch (token) { - case ARITH_LPAREN: - result = assignment(op, noeval); - if (last_token != ARITH_RPAREN) - yyerror("expecting ')'"); - last_token = yylex(); - return result; - case ARITH_NUM: - last_token = op; - return val->val; - case ARITH_VAR: - last_token = op; - return noeval ? val->val : arith_lookupvarint(val->name); - case ARITH_ADD: - token = op; - *val = yylval; - op = yylex(); - goto again; - case ARITH_SUB: - *val = yylval; - return -primary(op, val, yylex(), noeval); - case ARITH_NOT: - *val = yylval; - return !primary(op, val, yylex(), noeval); - case ARITH_BNOT: - *val = yylval; - return ~primary(op, val, yylex(), noeval); - default: - yyerror("expecting primary"); - } -} - -static arith_t binop2(arith_t a, int op, int precedence, int noeval) -{ - for (;;) { - union yystype val; - arith_t b; - int op2; - int token; - - token = yylex(); - val = yylval; - - b = primary(token, &val, yylex(), noeval); - - op2 = last_token; - if (op2 >= ARITH_BINOP_MIN && op2 < ARITH_BINOP_MAX && - higher_prec(op2, op)) { - b = binop2(b, op2, arith_prec(op), noeval); - op2 = last_token; - } - - a = noeval ? b : do_binop(op, a, b); - - if (op2 < ARITH_BINOP_MIN || op2 >= ARITH_BINOP_MAX || - arith_prec(op2) >= precedence) - return a; - - op = op2; - } -} - -static arith_t binop(int token, union yystype *val, int op, int noeval) -{ - arith_t a = primary(token, val, op, noeval); - - op = last_token; - if (op < ARITH_BINOP_MIN || op >= ARITH_BINOP_MAX) - return a; - - return binop2(a, op, ARITH_MAX_PREC, noeval); -} - -static arith_t and(int token, union yystype *val, int op, int noeval) -{ - arith_t a = binop(token, val, op, noeval); - arith_t b; - - op = last_token; - if (op != ARITH_AND) - return a; - - token = yylex(); - *val = yylval; - - b = and(token, val, yylex(), noeval | !a); - - return a && b; -} - -static arith_t or(int token, union yystype *val, int op, int noeval) -{ - arith_t a = and(token, val, op, noeval); - arith_t b; - - op = last_token; - if (op != ARITH_OR) - return a; - - token = yylex(); - *val = yylval; - - b = or(token, val, yylex(), noeval | !!a); - - return a || b; -} - -static arith_t cond(int token, union yystype *val, int op, int noeval) -{ - arith_t a = or(token, val, op, noeval); - arith_t b; - arith_t c; - - if (last_token != ARITH_QMARK) - return a; - - b = assignment(yylex(), noeval | !a); - - if (last_token != ARITH_COLON) - yyerror("expecting ':'"); - - token = yylex(); - *val = yylval; - - c = cond(token, val, yylex(), noeval | !!a); - - return a ? b : c; -} - -static arith_t assignment(int var, int noeval) -{ - union yystype val = yylval; - int op = yylex(); - arith_t result; - char sresult[DIGITS(result) + 1]; - - if (var != ARITH_VAR) - return cond(var, &val, op, noeval); - - if (op != ARITH_ASS && (op < ARITH_ASS_MIN || op >= ARITH_ASS_MAX)) - return cond(var, &val, op, noeval); - - result = assignment(yylex(), noeval); - if (noeval) - return result; - - if (op != ARITH_ASS) - result = do_binop(op - 11, arith_lookupvarint(val.name), result); - snprintf(sresult, sizeof(sresult), ARITH_FORMAT_STR, result); - setvar(val.name, sresult, 0); - return result; -} - -arith_t arith(const char *s) -{ - struct stackmark smark; - arith_t result; - - setstackmark(&smark); - - arith_buf = arith_startbuf = s; - - result = assignment(yylex(), 0); - - if (last_token) - yyerror("expecting EOF"); - - popstackmark(&smark); - - return result; -} - -/* - * The exp(1) builtin. - */ -int -letcmd(int argc, char **argv) -{ - const char *p; - char *concat; - char **ap; - arith_t i; - - if (argc > 1) { - p = argv[1]; - if (argc > 2) { - /* - * Concatenate arguments. - */ - STARTSTACKSTR(concat); - ap = argv + 2; - for (;;) { - while (*p) - STPUTC(*p++, concat); - if ((p = *ap++) == NULL) - break; - STPUTC(' ', concat); - } - STPUTC('\0', concat); - p = grabstackstr(concat); - } - } else - p = ""; - - i = arith(p); - - out1fmt(ARITH_FORMAT_STR "\n", i); - return !i; -} diff --git a/bin/1sh/arith_yacc.h b/bin/1sh/arith_yacc.h deleted file mode 100644 index 2dc43526..00000000 --- a/bin/1sh/arith_yacc.h +++ /dev/null @@ -1,93 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * Copyright (c) 2007 - * Herbert Xu <herbert@gondor.apana.org.au>. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD: releng/12.0/bin/sh/arith_yacc.h 279503 2015-03-01 21:46:55Z jilles $ - */ - -#define ARITH_ASS 1 - -#define ARITH_OR 2 -#define ARITH_AND 3 -#define ARITH_BAD 4 -#define ARITH_NUM 5 -#define ARITH_VAR 6 -#define ARITH_NOT 7 - -#define ARITH_BINOP_MIN 8 -#define ARITH_LE 8 -#define ARITH_GE 9 -#define ARITH_LT 10 -#define ARITH_GT 11 -#define ARITH_EQ 12 -#define ARITH_REM 13 -#define ARITH_BAND 14 -#define ARITH_LSHIFT 15 -#define ARITH_RSHIFT 16 -#define ARITH_MUL 17 -#define ARITH_ADD 18 -#define ARITH_BOR 19 -#define ARITH_SUB 20 -#define ARITH_BXOR 21 -#define ARITH_DIV 22 -#define ARITH_NE 23 -#define ARITH_BINOP_MAX 24 - -#define ARITH_ASS_MIN 24 -#define ARITH_REMASS 24 -#define ARITH_BANDASS 25 -#define ARITH_LSHIFTASS 26 -#define ARITH_RSHIFTASS 27 -#define ARITH_MULASS 28 -#define ARITH_ADDASS 29 -#define ARITH_BORASS 30 -#define ARITH_SUBASS 31 -#define ARITH_BXORASS 32 -#define ARITH_DIVASS 33 -#define ARITH_ASS_MAX 34 - -#define ARITH_LPAREN 34 -#define ARITH_RPAREN 35 -#define ARITH_BNOT 36 -#define ARITH_QMARK 37 -#define ARITH_COLON 38 - -extern const char *arith_buf; - -union yystype { - arith_t val; - char *name; -}; - -extern union yystype yylval; - -int yylex(void); diff --git a/bin/1sh/arith_yylex.c b/bin/1sh/arith_yylex.c deleted file mode 100644 index 0f38c878..00000000 --- a/bin/1sh/arith_yylex.c +++ /dev/null @@ -1,248 +0,0 @@ -/*- - * Copyright (c) 2002 - * Herbert Xu. - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/arith_yylex.c 279503 2015-03-01 21:46:55Z jilles $"); - -#include <inttypes.h> -#include <stdlib.h> -#include <string.h> -#include "shell.h" -#include "arith_yacc.h" -#include "expand.h" -#include "error.h" -#include "memalloc.h" -#include "parser.h" -#include "syntax.h" - -#if ARITH_BOR + 11 != ARITH_BORASS || ARITH_ASS + 11 != ARITH_EQ -#error Arithmetic tokens are out of order. -#endif - -int -yylex(void) -{ - int value; - const char *buf = arith_buf; - char *end; - const char *p; - - for (;;) { - value = *buf; - switch (value) { - case ' ': - case '\t': - case '\n': - buf++; - continue; - default: - return ARITH_BAD; - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - yylval.val = strtoarith_t(buf, &end, 0); - arith_buf = end; - return ARITH_NUM; - case 'A': - case 'B': - case 'C': - case 'D': - case 'E': - case 'F': - case 'G': - case 'H': - case 'I': - case 'J': - case 'K': - case 'L': - case 'M': - case 'N': - case 'O': - case 'P': - case 'Q': - case 'R': - case 'S': - case 'T': - case 'U': - case 'V': - case 'W': - case 'X': - case 'Y': - case 'Z': - case '_': - case 'a': - case 'b': - case 'c': - case 'd': - case 'e': - case 'f': - case 'g': - case 'h': - case 'i': - case 'j': - case 'k': - case 'l': - case 'm': - case 'n': - case 'o': - case 'p': - case 'q': - case 'r': - case 's': - case 't': - case 'u': - case 'v': - case 'w': - case 'x': - case 'y': - case 'z': - p = buf; - while (buf++, is_in_name(*buf)) - ; - yylval.name = stalloc(buf - p + 1); - memcpy(yylval.name, p, buf - p); - yylval.name[buf - p] = '\0'; - value = ARITH_VAR; - goto out; - case '=': - value += ARITH_ASS - '='; -checkeq: - buf++; -checkeqcur: - if (*buf != '=') - goto out; - value += 11; - break; - case '>': - switch (*++buf) { - case '=': - value += ARITH_GE - '>'; - break; - case '>': - value += ARITH_RSHIFT - '>'; - goto checkeq; - default: - value += ARITH_GT - '>'; - goto out; - } - break; - case '<': - switch (*++buf) { - case '=': - value += ARITH_LE - '<'; - break; - case '<': - value += ARITH_LSHIFT - '<'; - goto checkeq; - default: - value += ARITH_LT - '<'; - goto out; - } - break; - case '|': - if (*++buf != '|') { - value += ARITH_BOR - '|'; - goto checkeqcur; - } - value += ARITH_OR - '|'; - break; - case '&': - if (*++buf != '&') { - value += ARITH_BAND - '&'; - goto checkeqcur; - } - value += ARITH_AND - '&'; - break; - case '!': - if (*++buf != '=') { - value += ARITH_NOT - '!'; - goto out; - } - value += ARITH_NE - '!'; - break; - case 0: - goto out; - case '(': - value += ARITH_LPAREN - '('; - break; - case ')': - value += ARITH_RPAREN - ')'; - break; - case '*': - value += ARITH_MUL - '*'; - goto checkeq; - case '/': - value += ARITH_DIV - '/'; - goto checkeq; - case '%': - value += ARITH_REM - '%'; - goto checkeq; - case '+': - if (buf[1] == '+') - return ARITH_BAD; - value += ARITH_ADD - '+'; - goto checkeq; - case '-': - if (buf[1] == '-') - return ARITH_BAD; - value += ARITH_SUB - '-'; - goto checkeq; - case '~': - value += ARITH_BNOT - '~'; - break; - case '^': - value += ARITH_BXOR - '^'; - goto checkeq; - case '?': - value += ARITH_QMARK - '?'; - break; - case ':': - value += ARITH_COLON - ':'; - break; - } - break; - } - - buf++; -out: - arith_buf = buf; - return value; -} diff --git a/bin/1sh/bltin.h b/bin/1sh/bltin.h deleted file mode 100644 index e9adb878..00000000 --- a/bin/1sh/bltin.h +++ /dev/null @@ -1,81 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)bltin.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/bltin/bltin.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -/* - * This file is included by programs which are optionally built into the - * shell. If SHELL is defined, we try to map the standard UNIX library - * routines to ash routines using defines. - */ - -#include "shell.h" -#include "mystring.h" -#ifdef SHELL -#include "error.h" -#include "output.h" -#include "builtins.h" -#define FILE struct output -#undef stdout -#define stdout out1 -#undef stderr -#define stderr out2 -#define printf out1fmt -#undef putc -#define putc(c, file) outc(c, file) -#undef putchar -#define putchar(c) out1c(c) -#define fprintf outfmt -#define fputs outstr -#define fwrite(ptr, size, nmemb, file) outbin(ptr, (size) * (nmemb), file) -#define fflush flushout -#define INITARGS(argv) -#define warnx warning -#define warn(fmt, ...) warning(fmt ": %s", __VA_ARGS__, strerror(errno)) -#define errx(exitstatus, ...) error(__VA_ARGS__) - -#else -#undef NULL -#include <stdio.h> -#undef main -#define INITARGS(argv) if ((commandname = argv[0]) == NULL) {fputs("Argc is zero\n", stderr); exit(2);} else -#endif - -#include <unistd.h> - -pointer stalloc(int); -int killjob(const char *, int); - -extern char *commandname; diff --git a/bin/1sh/builtins.def b/bin/1sh/builtins.def deleted file mode 100644 index b3295a9b..00000000 --- a/bin/1sh/builtins.def +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/sh - - -#- -# Copyright (c) 1991, 1993 -# The Regents of the University of California. All rights reserved. -# -# This code is derived from software contributed to Berkeley by -# Kenneth Almquist. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)builtins.def 8.4 (Berkeley) 5/4/95 -# $FreeBSD: releng/12.0/bin/sh/builtins.def 319576 2017-06-04 21:02:48Z bdrewery $ - -# -# This file lists all the builtin commands. The first column is the name -# of a C routine. -# The -j flag specifies that this command is to be excluded from systems -# without job control. -# The -h flag specifies that this command is to be excluded from systems -# based on the NO_HISTORY compile-time symbol. -# The -n flag specifies that this command can safely be run in the same -# process when it is the only command in a command substitution. Some -# commands have special logic defined in safe_builtin(). -# The -s flag specifies that this is a POSIX 'special built-in' command. -# The rest of the line specifies the command name or names used to run the -# command. The entry for bltincmd, which is run when the user does not specify -# a command, must come first. -# -# NOTE: bltincmd must come first! - -bltincmd -n builtin -aliascmd alias -bgcmd -j bg -bindcmd bind -breakcmd -s break -s continue -cdcmd cd chdir -commandcmd -n command -dotcmd -s . -echocmd -n echo -evalcmd -s eval -execcmd -s exec -exitcmd -s exit -letcmd let -exportcmd -s export -s readonly -#exprcmd expr -falsecmd -n false -fgcmd -j fg -freebsd_wordexpcmd freebsd_wordexp -getoptscmd getopts -hashcmd hash -histcmd -h fc -jobidcmd -n jobid -jobscmd -n jobs -killcmd -n kill -localcmd local -printfcmd -n printf -pwdcmd -n pwd -readcmd read -returncmd -s return -setcmd -s set -setvarcmd setvar -shiftcmd -s shift -testcmd -n test [ -timescmd -n -s times -trapcmd -s trap -truecmd -n -s : true -typecmd -n type -ulimitcmd ulimit -umaskcmd umask -unaliascmd unalias -unsetcmd -s unset -waitcmd wait -wordexpcmd wordexp diff --git a/bin/1sh/cd.c b/bin/1sh/cd.c deleted file mode 100644 index d1780b64..00000000 --- a/bin/1sh/cd.c +++ /dev/null @@ -1,430 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)cd.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/cd.c 336320 2018-07-15 21:55:17Z jilles $"); - -#include <sys/types.h> -#include <sys/stat.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <errno.h> -#include <limits.h> - -/* - * The cd and pwd commands. - */ - -#include "shell.h" -#include "var.h" -#include "nodes.h" /* for jobs.h */ -#include "jobs.h" -#include "options.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "exec.h" -#include "redir.h" -#include "mystring.h" -#include "show.h" -#include "cd.h" -#include "builtins.h" - -static int cdlogical(char *); -static int cdphysical(char *); -static int docd(char *, int, int); -static char *getcomponent(char **); -static char *findcwd(char *); -static void updatepwd(char *); -static char *getpwd(void); -static char *getpwd2(void); - -static char *curdir = NULL; /* current working directory */ - -int -cdcmd(int argc __unused, char **argv __unused) -{ - const char *dest; - const char *path; - char *p; - struct stat statb; - int ch, phys, print = 0, getcwderr = 0; - int rc; - int errno1 = ENOENT; - - phys = Pflag; - while ((ch = nextopt("eLP")) != '\0') { - switch (ch) { - case 'e': - getcwderr = 1; - break; - case 'L': - phys = 0; - break; - case 'P': - phys = 1; - break; - } - } - - if (*argptr != NULL && argptr[1] != NULL) - error("too many arguments"); - - if ((dest = *argptr) == NULL && (dest = bltinlookup("HOME", 1)) == NULL) - error("HOME not set"); - if (*dest == '\0') - dest = "."; - if (dest[0] == '-' && dest[1] == '\0') { - dest = bltinlookup("OLDPWD", 1); - if (dest == NULL) - error("OLDPWD not set"); - print = 1; - } - if (dest[0] == '/' || - (dest[0] == '.' && (dest[1] == '/' || dest[1] == '\0')) || - (dest[0] == '.' && dest[1] == '.' && (dest[2] == '/' || dest[2] == '\0')) || - (path = bltinlookup("CDPATH", 1)) == NULL) - path = ""; - while ((p = padvance(&path, NULL, dest)) != NULL) { - if (stat(p, &statb) < 0) { - if (errno != ENOENT) - errno1 = errno; - } else if (!S_ISDIR(statb.st_mode)) - errno1 = ENOTDIR; - else { - if (!print) { - /* - * XXX - rethink - */ - if (p[0] == '.' && p[1] == '/' && p[2] != '\0') - print = strcmp(p + 2, dest); - else - print = strcmp(p, dest); - } - rc = docd(p, print, phys); - if (rc >= 0) - return getcwderr ? rc : 0; - if (errno != ENOENT) - errno1 = errno; - } - } - error("%s: %s", dest, strerror(errno1)); - /*NOTREACHED*/ - return 0; -} - - -/* - * Actually change the directory. In an interactive shell, print the - * directory name if "print" is nonzero. - */ -static int -docd(char *dest, int print, int phys) -{ - int rc; - - TRACE(("docd(\"%s\", %d, %d) called\n", dest, print, phys)); - - /* If logical cd fails, fall back to physical. */ - if ((phys || (rc = cdlogical(dest)) < 0) && (rc = cdphysical(dest)) < 0) - return (-1); - - if (print && iflag && curdir) { - out1fmt("%s\n", curdir); - /* - * Ignore write errors to preserve the invariant that the - * current directory is changed iff the exit status is 0 - * (or 1 if -e was given and the full pathname could not be - * determined). - */ - flushout(out1); - outclearerror(out1); - } - - return (rc); -} - -static int -cdlogical(char *dest) -{ - char *p; - char *q; - char *component; - char *path; - struct stat statb; - int first; - int badstat; - - /* - * Check each component of the path. If we find a symlink or - * something we can't stat, clear curdir to force a getcwd() - * next time we get the value of the current directory. - */ - badstat = 0; - path = stsavestr(dest); - STARTSTACKSTR(p); - if (*dest == '/') { - STPUTC('/', p); - path++; - } - first = 1; - while ((q = getcomponent(&path)) != NULL) { - if (q[0] == '\0' || (q[0] == '.' && q[1] == '\0')) - continue; - if (! first) - STPUTC('/', p); - first = 0; - component = q; - STPUTS(q, p); - if (equal(component, "..")) - continue; - STACKSTRNUL(p); - if (lstat(stackblock(), &statb) < 0) { - badstat = 1; - break; - } - } - - INTOFF; - if ((p = findcwd(badstat ? NULL : dest)) == NULL || chdir(p) < 0) { - INTON; - return (-1); - } - updatepwd(p); - INTON; - return (0); -} - -static int -cdphysical(char *dest) -{ - char *p; - int rc = 0; - - INTOFF; - if (chdir(dest) < 0) { - INTON; - return (-1); - } - p = findcwd(NULL); - if (p == NULL) { - warning("warning: failed to get name of current directory"); - rc = 1; - } - updatepwd(p); - INTON; - return (rc); -} - -/* - * Get the next component of the path name pointed to by *path. - * This routine overwrites *path and the string pointed to by it. - */ -static char * -getcomponent(char **path) -{ - char *p; - char *start; - - if ((p = *path) == NULL) - return NULL; - start = *path; - while (*p != '/' && *p != '\0') - p++; - if (*p == '\0') { - *path = NULL; - } else { - *p++ = '\0'; - *path = p; - } - return start; -} - - -static char * -findcwd(char *dir) -{ - char *new; - char *p; - char *path; - - /* - * If our argument is NULL, we don't know the current directory - * any more because we traversed a symbolic link or something - * we couldn't stat(). - */ - if (dir == NULL || curdir == NULL) - return getpwd2(); - path = stsavestr(dir); - STARTSTACKSTR(new); - if (*dir != '/') { - STPUTS(curdir, new); - if (STTOPC(new) == '/') - STUNPUTC(new); - } - while ((p = getcomponent(&path)) != NULL) { - if (equal(p, "..")) { - while (new > stackblock() && (STUNPUTC(new), *new) != '/'); - } else if (*p != '\0' && ! equal(p, ".")) { - STPUTC('/', new); - STPUTS(p, new); - } - } - if (new == stackblock()) - STPUTC('/', new); - STACKSTRNUL(new); - return stackblock(); -} - -/* - * Update curdir (the name of the current directory) in response to a - * cd command. We also call hashcd to let the routines in exec.c know - * that the current directory has changed. - */ -static void -updatepwd(char *dir) -{ - char *prevdir; - - hashcd(); /* update command hash table */ - - setvar("PWD", dir, VEXPORT); - setvar("OLDPWD", curdir, VEXPORT); - prevdir = curdir; - curdir = dir ? savestr(dir) : NULL; - ckfree(prevdir); -} - -int -pwdcmd(int argc __unused, char **argv __unused) -{ - char *p; - int ch, phys; - - phys = Pflag; - while ((ch = nextopt("LP")) != '\0') { - switch (ch) { - case 'L': - phys = 0; - break; - case 'P': - phys = 1; - break; - } - } - - if (*argptr != NULL) - error("too many arguments"); - - if (!phys && getpwd()) { - out1str(curdir); - out1c('\n'); - } else { - if ((p = getpwd2()) == NULL) - error(".: %s", strerror(errno)); - out1str(p); - out1c('\n'); - } - - return 0; -} - -/* - * Get the current directory and cache the result in curdir. - */ -static char * -getpwd(void) -{ - char *p; - - if (curdir) - return curdir; - - p = getpwd2(); - if (p != NULL) - curdir = savestr(p); - - return curdir; -} - -#define MAXPWD 256 - -/* - * Return the current directory. - */ -static char * -getpwd2(void) -{ - char *pwd; - int i; - - for (i = MAXPWD;; i *= 2) { - pwd = stalloc(i); - if (getcwd(pwd, i) != NULL) - return pwd; - stunalloc(pwd); - if (errno != ERANGE) - break; - } - - return NULL; -} - -/* - * Initialize PWD in a new shell. - * If the shell is interactive, we need to warn if this fails. - */ -void -pwd_init(int warn) -{ - char *pwd; - struct stat stdot, stpwd; - - pwd = lookupvar("PWD"); - if (pwd && *pwd == '/' && stat(".", &stdot) != -1 && - stat(pwd, &stpwd) != -1 && - stdot.st_dev == stpwd.st_dev && - stdot.st_ino == stpwd.st_ino) { - if (curdir) - ckfree(curdir); - curdir = savestr(pwd); - } - if (getpwd() == NULL && warn) - out2fmt_flush("sh: cannot determine working directory\n"); - setvar("PWD", curdir, VEXPORT); -} diff --git a/bin/1sh/cd.h b/bin/1sh/cd.h deleted file mode 100644 index 11de2228..00000000 --- a/bin/1sh/cd.h +++ /dev/null @@ -1,32 +0,0 @@ -/*- - * Copyright (c) 1995 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD: releng/12.0/bin/sh/cd.h 314436 2017-02-28 23:42:47Z imp $ - */ - -void pwd_init(int); diff --git a/bin/1sh/echo.c b/bin/1sh/echo.c deleted file mode 100644 index 78c146e9..00000000 --- a/bin/1sh/echo.c +++ /dev/null @@ -1,109 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)echo.c 8.2 (Berkeley) 5/4/95 - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/bltin/echo.c 326025 2017-11-20 19:49:47Z pfg $"); - -/* - * Echo command. - */ - -#define main echocmd - -#include "bltin.h" - -/* #define eflag 1 */ - -int -main(int argc, char *argv[]) -{ - char **ap; - char *p; - char c; - int count; - int nflag = 0; -#ifndef eflag - int eflag = 0; -#endif - - ap = argv; - if (argc) - ap++; - if ((p = *ap) != NULL) { - if (equal(p, "-n")) { - nflag++; - ap++; - } else if (equal(p, "-e")) { -#ifndef eflag - eflag++; -#endif - ap++; - } - } - while ((p = *ap++) != NULL) { - while ((c = *p++) != '\0') { - if (c == '\\' && eflag) { - switch (*p++) { - case 'a': c = '\a'; break; - case 'b': c = '\b'; break; - case 'c': return 0; /* exit */ - case 'e': c = '\033'; break; - case 'f': c = '\f'; break; - case 'n': c = '\n'; break; - case 'r': c = '\r'; break; - case 't': c = '\t'; break; - case 'v': c = '\v'; break; - case '\\': break; /* c = '\\' */ - case '0': - c = 0; - count = 3; - while (--count >= 0 && (unsigned)(*p - '0') < 8) - c = (c << 3) + (*p++ - '0'); - break; - default: - p--; - break; - } - } - putchar(c); - } - if (*ap) - putchar(' '); - } - if (! nflag) - putchar('\n'); - return 0; -} diff --git a/bin/1sh/error.c b/bin/1sh/error.c deleted file mode 100644 index 02680718..00000000 --- a/bin/1sh/error.c +++ /dev/null @@ -1,199 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)error.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/error.c 314436 2017-02-28 23:42:47Z imp $"); - -/* - * Errors and exceptions. - */ - -#include "shell.h" -#include "eval.h" -#include "main.h" -#include "options.h" -#include "output.h" -#include "error.h" -#include "nodes.h" /* show.h needs nodes.h */ -#include "show.h" -#include "trap.h" -#include <signal.h> -#include <stdlib.h> -#include <unistd.h> -#include <errno.h> - - -/* - * Code to handle exceptions in C. - */ - -struct jmploc *handler; -volatile sig_atomic_t exception; -volatile sig_atomic_t suppressint; -volatile sig_atomic_t intpending; - - -static void exverror(int, const char *, va_list) __printf0like(2, 0) __dead2; - -/* - * Called to raise an exception. Since C doesn't include exceptions, we - * just do a longjmp to the exception handler. The type of exception is - * stored in the global variable "exception". - * - * Interrupts are disabled; they should be reenabled when the exception is - * caught. - */ - -void -exraise(int e) -{ - INTOFF; - if (handler == NULL) - abort(); - exception = e; - longjmp(handler->loc, 1); -} - - -/* - * Called from trap.c when a SIGINT is received and not suppressed, or when - * an interrupt is pending and interrupts are re-enabled using INTON. - * (If the user specifies that SIGINT is to be trapped or ignored using the - * trap builtin, then this routine is not called.) Suppressint is nonzero - * when interrupts are held using the INTOFF macro. If SIGINTs are not - * suppressed and the shell is not a root shell, then we want to be - * terminated if we get here, as if we were terminated directly by a SIGINT. - * Arrange for this here. - */ - -void -onint(void) -{ - sigset_t sigs; - - intpending = 0; - sigemptyset(&sigs); - sigprocmask(SIG_SETMASK, &sigs, NULL); - - /* - * This doesn't seem to be needed, since main() emits a newline. - */ -#if 0 - if (tcgetpgrp(0) == getpid()) - write(STDERR_FILENO, "\n", 1); -#endif - if (rootshell && iflag) - exraise(EXINT); - else { - signal(SIGINT, SIG_DFL); - kill(getpid(), SIGINT); - _exit(128 + SIGINT); - } -} - - -static void -vwarning(const char *msg, va_list ap) -{ - if (commandname) - outfmt(out2, "%s: ", commandname); - else if (arg0) - outfmt(out2, "%s: ", arg0); - doformat(out2, msg, ap); - out2fmt_flush("\n"); -} - - -void -warning(const char *msg, ...) -{ - va_list ap; - va_start(ap, msg); - vwarning(msg, ap); - va_end(ap); -} - - -/* - * Exverror is called to raise the error exception. If the first argument - * is not NULL then error prints an error message using printf style - * formatting. It then raises the error exception. - */ -static void -exverror(int cond, const char *msg, va_list ap) -{ - /* - * An interrupt trumps an error. Certain places catch error - * exceptions or transform them to a plain nonzero exit code - * in child processes, and if an error exception can be handled, - * an interrupt can be handled as well. - * - * exraise() will disable interrupts for the exception handler. - */ - FORCEINTON; - -#ifdef DEBUG - if (msg) - TRACE(("exverror(%d, \"%s\") pid=%d\n", cond, msg, getpid())); - else - TRACE(("exverror(%d, NULL) pid=%d\n", cond, getpid())); -#endif - if (msg) - vwarning(msg, ap); - flushall(); - exraise(cond); -} - - -void -error(const char *msg, ...) -{ - va_list ap; - va_start(ap, msg); - exverror(EXERROR, msg, ap); - va_end(ap); -} - - -void -exerror(int cond, const char *msg, ...) -{ - va_list ap; - va_start(ap, msg); - exverror(cond, msg, ap); - va_end(ap); -} diff --git a/bin/1sh/error.h b/bin/1sh/error.h deleted file mode 100644 index 8efd5b38..00000000 --- a/bin/1sh/error.h +++ /dev/null @@ -1,95 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)error.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/error.h 319591 2017-06-04 21:58:02Z jilles $ - */ - -/* - * We enclose jmp_buf in a structure so that we can declare pointers to - * jump locations. The global variable handler contains the location to - * jump to when an exception occurs, and the global variable exception - * contains a code identifying the exception. To implement nested - * exception handlers, the user should save the value of handler on entry - * to an inner scope, set handler to point to a jmploc structure for the - * inner scope, and restore handler on exit from the scope. - */ - -#include <setjmp.h> -#include <signal.h> - -struct jmploc { - jmp_buf loc; -}; - -extern struct jmploc *handler; -extern volatile sig_atomic_t exception; - -/* exceptions */ -#define EXINT 0 /* SIGINT received */ -#define EXERROR 1 /* a generic error */ -#define EXEXEC 2 /* command execution failed */ -#define EXEXIT 3 /* call exitshell(exitstatus) */ - - -/* - * These macros allow the user to suspend the handling of interrupt signals - * over a period of time. This is similar to SIGHOLD to or sigblock, but - * much more efficient and portable. (But hacking the kernel is so much - * more fun than worrying about efficiency and portability. :-)) - */ - -extern volatile sig_atomic_t suppressint; -extern volatile sig_atomic_t intpending; - -#define INTOFF suppressint++ -#define INTON { if (--suppressint == 0 && intpending) onint(); } -#define is_int_on() suppressint -#define SETINTON(s) do { suppressint = (s); if (suppressint == 0 && intpending) onint(); } while (0) -#define FORCEINTON {suppressint = 0; if (intpending) onint();} -#define SET_PENDING_INT intpending = 1 -#define CLEAR_PENDING_INT intpending = 0 -#define int_pending() intpending - -void exraise(int) __dead2; -void onint(void) __dead2; -void warning(const char *, ...) __printflike(1, 2); -void error(const char *, ...) __printf0like(1, 2) __dead2; -void exerror(int, const char *, ...) __printf0like(2, 3) __dead2; - - -/* - * BSD setjmp saves the signal mask, which violates ANSI C and takes time, - * so we use _setjmp instead. - */ - -#define setjmp(jmploc) _setjmp(jmploc) -#define longjmp(jmploc, val) _longjmp(jmploc, val) diff --git a/bin/1sh/eval.c b/bin/1sh/eval.c deleted file mode 100644 index 5a5289e1..00000000 --- a/bin/1sh/eval.c +++ /dev/null @@ -1,1381 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)eval.c 8.9 (Berkeley) 6/8/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/eval.c 327212 2017-12-26 16:23:18Z jilles $"); - -#include <paths.h> -#include <signal.h> -#include <stdlib.h> -#include <unistd.h> -#include <sys/resource.h> -#include <errno.h> - -/* - * Evaluate a command. - */ - -#include "shell.h" -#include "nodes.h" -#include "syntax.h" -#include "expand.h" -#include "parser.h" -#include "jobs.h" -#include "eval.h" -#include "builtins.h" -#include "options.h" -#include "exec.h" -#include "redir.h" -#include "input.h" -#include "output.h" -#include "trap.h" -#include "var.h" -#include "memalloc.h" -#include "error.h" -#include "show.h" -#include "mystring.h" -#ifndef NO_HISTORY -#include "myhistedit.h" -#endif - - -int evalskip; /* set if we are skipping commands */ -int skipcount; /* number of levels to skip */ -static int loopnest; /* current loop nesting level */ -int funcnest; /* depth of function calls */ -static int builtin_flags; /* evalcommand flags for builtins */ - - -char *commandname; -struct arglist *cmdenviron; -int exitstatus; /* exit status of last command */ -int oexitstatus; /* saved exit status */ - - -static void evalloop(union node *, int); -static void evalfor(union node *, int); -static union node *evalcase(union node *); -static void evalsubshell(union node *, int); -static void evalredir(union node *, int); -static void exphere(union node *, struct arglist *); -static void expredir(union node *); -static void evalpipe(union node *); -static int is_valid_fast_cmdsubst(union node *n); -static void evalcommand(union node *, int, struct backcmd *); -static void prehash(union node *); - - -/* - * Called to reset things after an exception. - */ - -void -reseteval(void) -{ - evalskip = 0; - loopnest = 0; -} - - -/* - * The eval command. - */ - -int -evalcmd(int argc, char **argv) -{ - char *p; - char *concat; - char **ap; - - if (argc > 1) { - p = argv[1]; - if (argc > 2) { - STARTSTACKSTR(concat); - ap = argv + 2; - for (;;) { - STPUTS(p, concat); - if ((p = *ap++) == NULL) - break; - STPUTC(' ', concat); - } - STPUTC('\0', concat); - p = grabstackstr(concat); - } - evalstring(p, builtin_flags); - } else - exitstatus = 0; - return exitstatus; -} - - -/* - * Execute a command or commands contained in a string. - */ - -void -evalstring(const char *s, int flags) -{ - union node *n; - struct stackmark smark; - int flags_exit; - int any; - - flags_exit = flags & EV_EXIT; - flags &= ~EV_EXIT; - any = 0; - setstackmark(&smark); - setinputstring(s, 1); - while ((n = parsecmd(0)) != NEOF) { - if (n != NULL && !nflag) { - if (flags_exit && preadateof()) - evaltree(n, flags | EV_EXIT); - else - evaltree(n, flags); - any = 1; - if (evalskip) - break; - } - popstackmark(&smark); - setstackmark(&smark); - } - popfile(); - popstackmark(&smark); - if (!any) - exitstatus = 0; - if (flags_exit) - exraise(EXEXIT); -} - - -/* - * Evaluate a parse tree. The value is left in the global variable - * exitstatus. - */ - -void -evaltree(union node *n, int flags) -{ - int do_etest; - union node *next; - struct stackmark smark; - - setstackmark(&smark); - do_etest = 0; - if (n == NULL) { - TRACE(("evaltree(NULL) called\n")); - exitstatus = 0; - goto out; - } - do { - next = NULL; -#ifndef NO_HISTORY - displayhist = 1; /* show history substitutions done with fc */ -#endif - TRACE(("evaltree(%p: %d) called\n", (void *)n, n->type)); - switch (n->type) { - case NSEMI: - evaltree(n->nbinary.ch1, flags & ~EV_EXIT); - if (evalskip) - goto out; - next = n->nbinary.ch2; - break; - case NAND: - evaltree(n->nbinary.ch1, EV_TESTED); - if (evalskip || exitstatus != 0) { - goto out; - } - next = n->nbinary.ch2; - break; - case NOR: - evaltree(n->nbinary.ch1, EV_TESTED); - if (evalskip || exitstatus == 0) - goto out; - next = n->nbinary.ch2; - break; - case NREDIR: - evalredir(n, flags); - break; - case NSUBSHELL: - evalsubshell(n, flags); - do_etest = !(flags & EV_TESTED); - break; - case NBACKGND: - evalsubshell(n, flags); - break; - case NIF: { - evaltree(n->nif.test, EV_TESTED); - if (evalskip) - goto out; - if (exitstatus == 0) - next = n->nif.ifpart; - else if (n->nif.elsepart) - next = n->nif.elsepart; - else - exitstatus = 0; - break; - } - case NWHILE: - case NUNTIL: - evalloop(n, flags & ~EV_EXIT); - break; - case NFOR: - evalfor(n, flags & ~EV_EXIT); - break; - case NCASE: - next = evalcase(n); - break; - case NCLIST: - next = n->nclist.body; - break; - case NCLISTFALLTHRU: - if (n->nclist.body) { - evaltree(n->nclist.body, flags & ~EV_EXIT); - if (evalskip) - goto out; - } - next = n->nclist.next; - break; - case NDEFUN: - defun(n->narg.text, n->narg.next); - exitstatus = 0; - break; - case NNOT: - evaltree(n->nnot.com, EV_TESTED); - if (evalskip) - goto out; - exitstatus = !exitstatus; - break; - - case NPIPE: - evalpipe(n); - do_etest = !(flags & EV_TESTED); - break; - case NCMD: - evalcommand(n, flags, (struct backcmd *)NULL); - do_etest = !(flags & EV_TESTED); - break; - default: - out1fmt("Node type = %d\n", n->type); - flushout(&output); - break; - } - n = next; - popstackmark(&smark); - setstackmark(&smark); - } while (n != NULL); -out: - popstackmark(&smark); - if (pendingsig) - dotrap(); - if (eflag && exitstatus != 0 && do_etest) - exitshell(exitstatus); - if (flags & EV_EXIT) - exraise(EXEXIT); -} - - -static void -evalloop(union node *n, int flags) -{ - int status; - - loopnest++; - status = 0; - for (;;) { - if (!evalskip) - evaltree(n->nbinary.ch1, EV_TESTED); - if (evalskip) { - if (evalskip == SKIPCONT && --skipcount <= 0) { - evalskip = 0; - continue; - } - if (evalskip == SKIPBREAK && --skipcount <= 0) - evalskip = 0; - if (evalskip == SKIPRETURN) - status = exitstatus; - break; - } - if (n->type == NWHILE) { - if (exitstatus != 0) - break; - } else { - if (exitstatus == 0) - break; - } - evaltree(n->nbinary.ch2, flags); - status = exitstatus; - } - loopnest--; - exitstatus = status; -} - - - -static void -evalfor(union node *n, int flags) -{ - struct arglist arglist; - union node *argp; - int i; - int status; - - emptyarglist(&arglist); - for (argp = n->nfor.args ; argp ; argp = argp->narg.next) { - oexitstatus = exitstatus; - expandarg(argp, &arglist, EXP_FULL | EXP_TILDE); - } - - loopnest++; - status = 0; - for (i = 0; i < arglist.count; i++) { - setvar(n->nfor.var, arglist.args[i], 0); - evaltree(n->nfor.body, flags); - status = exitstatus; - if (evalskip) { - if (evalskip == SKIPCONT && --skipcount <= 0) { - evalskip = 0; - continue; - } - if (evalskip == SKIPBREAK && --skipcount <= 0) - evalskip = 0; - break; - } - } - loopnest--; - exitstatus = status; -} - - -/* - * Evaluate a case statement, returning the selected tree. - * - * The exit status needs care to get right. - */ - -static union node * -evalcase(union node *n) -{ - union node *cp; - union node *patp; - struct arglist arglist; - - emptyarglist(&arglist); - oexitstatus = exitstatus; - expandarg(n->ncase.expr, &arglist, EXP_TILDE); - for (cp = n->ncase.cases ; cp ; cp = cp->nclist.next) { - for (patp = cp->nclist.pattern ; patp ; patp = patp->narg.next) { - if (casematch(patp, arglist.args[0])) { - while (cp->nclist.next && - cp->type == NCLISTFALLTHRU && - cp->nclist.body == NULL) - cp = cp->nclist.next; - if (cp->nclist.next && - cp->type == NCLISTFALLTHRU) - return (cp); - if (cp->nclist.body == NULL) - exitstatus = 0; - return (cp->nclist.body); - } - } - } - exitstatus = 0; - return (NULL); -} - - - -/* - * Kick off a subshell to evaluate a tree. - */ - -static void -evalsubshell(union node *n, int flags) -{ - struct job *jp; - int backgnd = (n->type == NBACKGND); - - oexitstatus = exitstatus; - expredir(n->nredir.redirect); - if ((!backgnd && flags & EV_EXIT && !have_traps()) || - forkshell(jp = makejob(n, 1), n, backgnd) == 0) { - if (backgnd) - flags &=~ EV_TESTED; - redirect(n->nredir.redirect, 0); - evaltree(n->nredir.n, flags | EV_EXIT); /* never returns */ - } else if (! backgnd) { - INTOFF; - exitstatus = waitforjob(jp, (int *)NULL); - INTON; - } else - exitstatus = 0; -} - - -/* - * Evaluate a redirected compound command. - */ - -static void -evalredir(union node *n, int flags) -{ - struct jmploc jmploc; - struct jmploc *savehandler; - volatile int in_redirect = 1; - - oexitstatus = exitstatus; - expredir(n->nredir.redirect); - savehandler = handler; - if (setjmp(jmploc.loc)) { - int e; - - handler = savehandler; - e = exception; - popredir(); - if (e == EXERROR || e == EXEXEC) { - if (in_redirect) { - exitstatus = 2; - FORCEINTON; - return; - } - } - longjmp(handler->loc, 1); - } else { - INTOFF; - handler = &jmploc; - redirect(n->nredir.redirect, REDIR_PUSH); - in_redirect = 0; - INTON; - evaltree(n->nredir.n, flags); - } - INTOFF; - handler = savehandler; - popredir(); - INTON; -} - - -static void -exphere(union node *redir, struct arglist *fn) -{ - struct jmploc jmploc; - struct jmploc *savehandler; - struct localvar *savelocalvars; - int need_longjmp = 0; - unsigned char saveoptreset; - - redir->nhere.expdoc = ""; - savelocalvars = localvars; - localvars = NULL; - saveoptreset = shellparam.reset; - forcelocal++; - savehandler = handler; - if (setjmp(jmploc.loc)) - need_longjmp = exception != EXERROR && exception != EXEXEC; - else { - handler = &jmploc; - expandarg(redir->nhere.doc, fn, 0); - redir->nhere.expdoc = fn->args[0]; - INTOFF; - } - handler = savehandler; - forcelocal--; - poplocalvars(); - localvars = savelocalvars; - shellparam.reset = saveoptreset; - if (need_longjmp) - longjmp(handler->loc, 1); - INTON; -} - - -/* - * Compute the names of the files in a redirection list. - */ - -static void -expredir(union node *n) -{ - union node *redir; - - for (redir = n ; redir ; redir = redir->nfile.next) { - struct arglist fn; - emptyarglist(&fn); - switch (redir->type) { - case NFROM: - case NTO: - case NFROMTO: - case NAPPEND: - case NCLOBBER: - expandarg(redir->nfile.fname, &fn, EXP_TILDE); - redir->nfile.expfname = fn.args[0]; - break; - case NFROMFD: - case NTOFD: - if (redir->ndup.vname) { - expandarg(redir->ndup.vname, &fn, EXP_TILDE); - fixredir(redir, fn.args[0], 1); - } - break; - case NXHERE: - exphere(redir, &fn); - break; - } - } -} - - - -/* - * Evaluate a pipeline. All the processes in the pipeline are children - * of the process creating the pipeline. (This differs from some versions - * of the shell, which make the last process in a pipeline the parent - * of all the rest.) - */ - -static void -evalpipe(union node *n) -{ - struct job *jp; - struct nodelist *lp; - int pipelen; - int prevfd; - int pip[2]; - - TRACE(("evalpipe(%p) called\n", (void *)n)); - pipelen = 0; - for (lp = n->npipe.cmdlist ; lp ; lp = lp->next) - pipelen++; - INTOFF; - jp = makejob(n, pipelen); - prevfd = -1; - for (lp = n->npipe.cmdlist ; lp ; lp = lp->next) { - prehash(lp->n); - pip[1] = -1; - if (lp->next) { - if (pipe(pip) < 0) { - if (prevfd >= 0) - close(prevfd); - error("Pipe call failed: %s", strerror(errno)); - } - } - if (forkshell(jp, lp->n, n->npipe.backgnd) == 0) { - INTON; - if (prevfd > 0) { - dup2(prevfd, 0); - close(prevfd); - } - if (pip[1] >= 0) { - if (!(prevfd >= 0 && pip[0] == 0)) - close(pip[0]); - if (pip[1] != 1) { - dup2(pip[1], 1); - close(pip[1]); - } - } - evaltree(lp->n, EV_EXIT); - } - if (prevfd >= 0) - close(prevfd); - prevfd = pip[0]; - if (pip[1] != -1) - close(pip[1]); - } - INTON; - if (n->npipe.backgnd == 0) { - INTOFF; - exitstatus = waitforjob(jp, (int *)NULL); - TRACE(("evalpipe: job done exit status %d\n", exitstatus)); - INTON; - } else - exitstatus = 0; -} - - - -static int -is_valid_fast_cmdsubst(union node *n) -{ - - return (n->type == NCMD); -} - -/* - * Execute a command inside back quotes. If it's a builtin command, we - * want to save its output in a block obtained from malloc. Otherwise - * we fork off a subprocess and get the output of the command via a pipe. - * Should be called with interrupts off. - */ - -void -evalbackcmd(union node *n, struct backcmd *result) -{ - int pip[2]; - struct job *jp; - struct stackmark smark; - struct jmploc jmploc; - struct jmploc *savehandler; - struct localvar *savelocalvars; - unsigned char saveoptreset; - - result->fd = -1; - result->buf = NULL; - result->nleft = 0; - result->jp = NULL; - if (n == NULL) { - exitstatus = 0; - return; - } - setstackmark(&smark); - exitstatus = oexitstatus; - if (is_valid_fast_cmdsubst(n)) { - savelocalvars = localvars; - localvars = NULL; - saveoptreset = shellparam.reset; - forcelocal++; - savehandler = handler; - if (setjmp(jmploc.loc)) { - if (exception == EXERROR || exception == EXEXEC) - exitstatus = 2; - else if (exception != 0) { - handler = savehandler; - forcelocal--; - poplocalvars(); - localvars = savelocalvars; - shellparam.reset = saveoptreset; - longjmp(handler->loc, 1); - } - } else { - handler = &jmploc; - evalcommand(n, EV_BACKCMD, result); - } - handler = savehandler; - forcelocal--; - poplocalvars(); - localvars = savelocalvars; - shellparam.reset = saveoptreset; - } else { - if (pipe(pip) < 0) - error("Pipe call failed: %s", strerror(errno)); - jp = makejob(n, 1); - if (forkshell(jp, n, FORK_NOJOB) == 0) { - FORCEINTON; - close(pip[0]); - if (pip[1] != 1) { - dup2(pip[1], 1); - close(pip[1]); - } - evaltree(n, EV_EXIT); - } - close(pip[1]); - result->fd = pip[0]; - result->jp = jp; - } - popstackmark(&smark); - TRACE(("evalbackcmd done: fd=%d buf=%p nleft=%d jp=%p\n", - result->fd, result->buf, result->nleft, result->jp)); -} - -static int -mustexpandto(const char *argtext, const char *mask) -{ - for (;;) { - if (*argtext == CTLQUOTEMARK || *argtext == CTLQUOTEEND) { - argtext++; - continue; - } - if (*argtext == CTLESC) - argtext++; - else if (BASESYNTAX[(int)*argtext] == CCTL) - return (0); - if (*argtext != *mask) - return (0); - if (*argtext == '\0') - return (1); - argtext++; - mask++; - } -} - -static int -isdeclarationcmd(struct narg *arg) -{ - int have_command = 0; - - if (arg == NULL) - return (0); - while (mustexpandto(arg->text, "command")) { - have_command = 1; - arg = &arg->next->narg; - if (arg == NULL) - return (0); - /* - * To also allow "command -p" and "command --" as part of - * a declaration command, add code here. - * We do not do this, as ksh does not do it either and it - * is not required by POSIX. - */ - } - return (mustexpandto(arg->text, "export") || - mustexpandto(arg->text, "readonly") || - (mustexpandto(arg->text, "local") && - (have_command || !isfunc("local")))); -} - -static void -xtracecommand(struct arglist *varlist, int argc, char **argv) -{ - char sep = 0; - const char *text, *p, *ps4; - int i; - - ps4 = expandstr(ps4val()); - out2str(ps4 != NULL ? ps4 : ps4val()); - for (i = 0; i < varlist->count; i++) { - text = varlist->args[i]; - if (sep != 0) - out2c(' '); - p = strchr(text, '='); - if (p != NULL) { - p++; - outbin(text, p - text, out2); - out2qstr(p); - } else - out2qstr(text); - sep = ' '; - } - for (i = 0; i < argc; i++) { - text = argv[i]; - if (sep != 0) - out2c(' '); - out2qstr(text); - sep = ' '; - } - out2c('\n'); - flushout(&errout); -} - -/* - * Check if a builtin can safely be executed in the same process, - * even though it should be in a subshell (command substitution). - * Note that jobid, jobs, times and trap can show information not - * available in a child process; this is deliberate. - * The arguments should already have been expanded. - */ -static int -safe_builtin(int idx, int argc, char **argv) -{ - /* Generated from builtins.def. */ - if (safe_builtin_always(idx)) - return (1); - if (idx == EXPORTCMD || idx == TRAPCMD || idx == ULIMITCMD || - idx == UMASKCMD) - return (argc <= 1 || (argc == 2 && argv[1][0] == '-')); - if (idx == SETCMD) - return (argc <= 1 || (argc == 2 && (argv[1][0] == '-' || - argv[1][0] == '+') && argv[1][1] == 'o' && - argv[1][2] == '\0')); - return (0); -} - -/* - * Execute a simple command. - * Note: This may or may not return if (flags & EV_EXIT). - */ - -static void -evalcommand(union node *cmd, int flags, struct backcmd *backcmd) -{ - union node *argp; - struct arglist arglist; - struct arglist varlist; - char **argv; - int argc; - char **envp; - int varflag; - int mode; - int pip[2]; - struct cmdentry cmdentry; - struct job *jp; - struct jmploc jmploc; - struct jmploc *savehandler; - char *savecmdname; - struct shparam saveparam; - struct localvar *savelocalvars; - struct parsefile *savetopfile; - volatile int e; - char *lastarg; - int signaled; - int do_clearcmdentry; - const char *path = pathval(); - int i; - - /* First expand the arguments. */ - TRACE(("evalcommand(%p, %d) called\n", (void *)cmd, flags)); - emptyarglist(&arglist); - emptyarglist(&varlist); - varflag = 1; - jp = NULL; - do_clearcmdentry = 0; - oexitstatus = exitstatus; - exitstatus = 0; - /* Add one slot at the beginning for tryexec(). */ - appendarglist(&arglist, nullstr); - for (argp = cmd->ncmd.args ; argp ; argp = argp->narg.next) { - if (varflag && isassignment(argp->narg.text)) { - expandarg(argp, varflag == 1 ? &varlist : &arglist, - EXP_VARTILDE); - continue; - } else if (varflag == 1) - varflag = isdeclarationcmd(&argp->narg) ? 2 : 0; - expandarg(argp, &arglist, EXP_FULL | EXP_TILDE); - } - appendarglist(&arglist, nullstr); - expredir(cmd->ncmd.redirect); - argc = arglist.count - 2; - argv = &arglist.args[1]; - - argv[argc] = NULL; - lastarg = NULL; - if (iflag && funcnest == 0 && argc > 0) - lastarg = argv[argc - 1]; - - /* Print the command if xflag is set. */ - if (xflag) - xtracecommand(&varlist, argc, argv); - - /* Now locate the command. */ - if (argc == 0) { - /* Variable assignment(s) without command */ - cmdentry.cmdtype = CMDBUILTIN; - cmdentry.u.index = BLTINCMD; - cmdentry.special = 0; - } else { - static const char PATH[] = "PATH="; - int cmd_flags = 0, bltinonly = 0; - - /* - * Modify the command lookup path, if a PATH= assignment - * is present - */ - for (i = 0; i < varlist.count; i++) - if (strncmp(varlist.args[i], PATH, sizeof(PATH) - 1) == 0) { - path = varlist.args[i] + sizeof(PATH) - 1; - /* - * On `PATH=... command`, we need to make - * sure that the command isn't using the - * non-updated hash table of the outer PATH - * setting and we need to make sure that - * the hash table isn't filled with items - * from the temporary setting. - * - * It would be better to forbit using and - * updating the table while this command - * runs, by the command finding mechanism - * is heavily integrated with hash handling, - * so we just delete the hash before and after - * the command runs. Partly deleting like - * changepatch() does doesn't seem worth the - * bookinging effort, since most such runs add - * directories in front of the new PATH. - */ - clearcmdentry(); - do_clearcmdentry = 1; - } - - for (;;) { - if (bltinonly) { - cmdentry.u.index = find_builtin(*argv, &cmdentry.special); - if (cmdentry.u.index < 0) { - cmdentry.u.index = BLTINCMD; - argv--; - argc++; - break; - } - } else - find_command(argv[0], &cmdentry, cmd_flags, path); - /* implement the bltin and command builtins here */ - if (cmdentry.cmdtype != CMDBUILTIN) - break; - if (cmdentry.u.index == BLTINCMD) { - if (argc == 1) - break; - argv++; - argc--; - bltinonly = 1; - } else if (cmdentry.u.index == COMMANDCMD) { - if (argc == 1) - break; - if (!strcmp(argv[1], "-p")) { - if (argc == 2) - break; - if (argv[2][0] == '-') { - if (strcmp(argv[2], "--")) - break; - if (argc == 3) - break; - argv += 3; - argc -= 3; - } else { - argv += 2; - argc -= 2; - } - path = _PATH_STDPATH; - clearcmdentry(); - do_clearcmdentry = 1; - } else if (!strcmp(argv[1], "--")) { - if (argc == 2) - break; - argv += 2; - argc -= 2; - } else if (argv[1][0] == '-') - break; - else { - argv++; - argc--; - } - cmd_flags |= DO_NOFUNC; - bltinonly = 0; - } else - break; - } - /* - * Special builtins lose their special properties when - * called via 'command'. - */ - if (cmd_flags & DO_NOFUNC) - cmdentry.special = 0; - } - - /* Fork off a child process if necessary. */ - if (((cmdentry.cmdtype == CMDNORMAL || cmdentry.cmdtype == CMDUNKNOWN) - && ((flags & EV_EXIT) == 0 || have_traps())) - || ((flags & EV_BACKCMD) != 0 - && (cmdentry.cmdtype != CMDBUILTIN || - !safe_builtin(cmdentry.u.index, argc, argv)))) { - jp = makejob(cmd, 1); - mode = FORK_FG; - if (flags & EV_BACKCMD) { - mode = FORK_NOJOB; - if (pipe(pip) < 0) - error("Pipe call failed: %s", strerror(errno)); - } - if (cmdentry.cmdtype == CMDNORMAL && - cmd->ncmd.redirect == NULL && - varlist.count == 0 && - (mode == FORK_FG || mode == FORK_NOJOB) && - !disvforkset() && !iflag && !mflag) { - vforkexecshell(jp, argv, environment(), path, - cmdentry.u.index, flags & EV_BACKCMD ? pip : NULL); - goto parent; - } - if (forkshell(jp, cmd, mode) != 0) - goto parent; /* at end of routine */ - if (flags & EV_BACKCMD) { - FORCEINTON; - close(pip[0]); - if (pip[1] != 1) { - dup2(pip[1], 1); - close(pip[1]); - } - flags &= ~EV_BACKCMD; - } - flags |= EV_EXIT; - } - - /* This is the child process if a fork occurred. */ - /* Execute the command. */ - if (cmdentry.cmdtype == CMDFUNCTION) { -#ifdef DEBUG - trputs("Shell function: "); trargs(argv); -#endif - saveparam = shellparam; - shellparam.malloc = 0; - shellparam.reset = 1; - shellparam.nparam = argc - 1; - shellparam.p = argv + 1; - shellparam.optp = NULL; - shellparam.optnext = NULL; - INTOFF; - savelocalvars = localvars; - localvars = NULL; - reffunc(cmdentry.u.func); - savehandler = handler; - if (setjmp(jmploc.loc)) { - popredir(); - unreffunc(cmdentry.u.func); - poplocalvars(); - localvars = savelocalvars; - freeparam(&shellparam); - shellparam = saveparam; - funcnest--; - handler = savehandler; - longjmp(handler->loc, 1); - } - handler = &jmploc; - funcnest++; - redirect(cmd->ncmd.redirect, REDIR_PUSH); - INTON; - for (i = 0; i < varlist.count; i++) - mklocal(varlist.args[i]); - exitstatus = oexitstatus; - evaltree(getfuncnode(cmdentry.u.func), - flags & (EV_TESTED | EV_EXIT)); - INTOFF; - unreffunc(cmdentry.u.func); - poplocalvars(); - localvars = savelocalvars; - freeparam(&shellparam); - shellparam = saveparam; - handler = savehandler; - funcnest--; - popredir(); - INTON; - if (evalskip == SKIPRETURN) { - evalskip = 0; - skipcount = 0; - } - if (jp) - exitshell(exitstatus); - } else if (cmdentry.cmdtype == CMDBUILTIN) { -#ifdef DEBUG - trputs("builtin command: "); trargs(argv); -#endif - mode = (cmdentry.u.index == EXECCMD)? 0 : REDIR_PUSH; - if (flags == EV_BACKCMD) { - memout.nextc = memout.buf; - mode |= REDIR_BACKQ; - } - savecmdname = commandname; - savetopfile = getcurrentfile(); - cmdenviron = &varlist; - e = -1; - savehandler = handler; - if (setjmp(jmploc.loc)) { - e = exception; - if (e == EXINT) - exitstatus = SIGINT+128; - else if (e != EXEXIT) - exitstatus = 2; - goto cmddone; - } - handler = &jmploc; - redirect(cmd->ncmd.redirect, mode); - outclearerror(out1); - /* - * If there is no command word, redirection errors should - * not be fatal but assignment errors should. - */ - if (argc == 0) - cmdentry.special = 1; - listsetvar(cmdenviron, cmdentry.special ? 0 : VNOSET); - if (argc > 0) - bltinsetlocale(); - commandname = argv[0]; - argptr = argv + 1; - nextopt_optptr = NULL; /* initialize nextopt */ - builtin_flags = flags; - exitstatus = (*builtinfunc[cmdentry.u.index])(argc, argv); - flushall(); - if (outiserror(out1)) { - warning("write error on stdout"); - if (exitstatus == 0 || exitstatus == 1) - exitstatus = 2; - } -cmddone: - if (argc > 0) - bltinunsetlocale(); - cmdenviron = NULL; - out1 = &output; - out2 = &errout; - freestdout(); - handler = savehandler; - commandname = savecmdname; - if (jp) - exitshell(exitstatus); - if (flags == EV_BACKCMD) { - backcmd->buf = memout.buf; - backcmd->nleft = memout.buf != NULL ? - memout.nextc - memout.buf : 0; - memout.buf = NULL; - memout.nextc = NULL; - memout.bufend = NULL; - memout.bufsize = 64; - } - if (cmdentry.u.index != EXECCMD) - popredir(); - if (e != -1) { - if ((e != EXERROR && e != EXEXEC) - || cmdentry.special) - exraise(e); - popfilesupto(savetopfile); - if (flags != EV_BACKCMD) - FORCEINTON; - } - } else { -#ifdef DEBUG - trputs("normal command: "); trargs(argv); -#endif - redirect(cmd->ncmd.redirect, 0); - for (i = 0; i < varlist.count; i++) - setvareq(varlist.args[i], VEXPORT|VSTACK); - envp = environment(); - shellexec(argv, envp, path, cmdentry.u.index); - /*NOTREACHED*/ - } - goto out; - -parent: /* parent process gets here (if we forked) */ - if (mode == FORK_FG) { /* argument to fork */ - INTOFF; - exitstatus = waitforjob(jp, &signaled); - INTON; - if (iflag && loopnest > 0 && signaled) { - evalskip = SKIPBREAK; - skipcount = loopnest; - } - } else if (mode == FORK_NOJOB) { - backcmd->fd = pip[0]; - close(pip[1]); - backcmd->jp = jp; - } - -out: - if (lastarg) - setvar("_", lastarg, 0); - if (do_clearcmdentry) - clearcmdentry(); -} - - - -/* - * Search for a command. This is called before we fork so that the - * location of the command will be available in the parent as well as - * the child. The check for "goodname" is an overly conservative - * check that the name will not be subject to expansion. - */ - -static void -prehash(union node *n) -{ - struct cmdentry entry; - - if (n && n->type == NCMD && n->ncmd.args) - if (goodname(n->ncmd.args->narg.text)) - find_command(n->ncmd.args->narg.text, &entry, 0, - pathval()); -} - - - -/* - * Builtin commands. Builtin commands whose functions are closely - * tied to evaluation are implemented here. - */ - -/* - * No command given, a bltin command with no arguments, or a bltin command - * with an invalid name. - */ - -int -bltincmd(int argc, char **argv) -{ - if (argc > 1) { - out2fmt_flush("%s: not found\n", argv[1]); - return 127; - } - /* - * Preserve exitstatus of a previous possible command substitution - * as POSIX mandates - */ - return exitstatus; -} - - -/* - * Handle break and continue commands. Break, continue, and return are - * all handled by setting the evalskip flag. The evaluation routines - * above all check this flag, and if it is set they start skipping - * commands rather than executing them. The variable skipcount is - * the number of loops to break/continue, or the number of function - * levels to return. (The latter is always 1.) It should probably - * be an error to break out of more loops than exist, but it isn't - * in the standard shell so we don't make it one here. - */ - -int -breakcmd(int argc, char **argv) -{ - long n; - char *end; - - if (argc > 1) { - /* Allow arbitrarily large numbers. */ - n = strtol(argv[1], &end, 10); - if (!is_digit(argv[1][0]) || *end != '\0') - error("Illegal number: %s", argv[1]); - } else - n = 1; - if (n > loopnest) - n = loopnest; - if (n > 0) { - evalskip = (**argv == 'c')? SKIPCONT : SKIPBREAK; - skipcount = n; - } - return 0; -} - -/* - * The `command' command. - */ -int -commandcmd(int argc __unused, char **argv __unused) -{ - const char *path; - int ch; - int cmd = -1; - - path = bltinlookup("PATH", 1); - - while ((ch = nextopt("pvV")) != '\0') { - switch (ch) { - case 'p': - path = _PATH_STDPATH; - break; - case 'v': - cmd = TYPECMD_SMALLV; - break; - case 'V': - cmd = TYPECMD_BIGV; - break; - } - } - - if (cmd != -1) { - if (*argptr == NULL || argptr[1] != NULL) - error("wrong number of arguments"); - return typecmd_impl(2, argptr - 1, cmd, path); - } - if (*argptr != NULL) - error("commandcmd bad call"); - - /* - * Do nothing successfully if no command was specified; - * ksh also does this. - */ - return 0; -} - - -/* - * The return command. - */ - -int -returncmd(int argc, char **argv) -{ - int ret = argc > 1 ? number(argv[1]) : oexitstatus; - - evalskip = SKIPRETURN; - skipcount = 1; - return ret; -} - - -int -falsecmd(int argc __unused, char **argv __unused) -{ - return 1; -} - - -int -truecmd(int argc __unused, char **argv __unused) -{ - return 0; -} - - -int -execcmd(int argc, char **argv) -{ - int i; - - /* - * Because we have historically not supported any options, - * only treat "--" specially. - */ - if (argc > 1 && strcmp(argv[1], "--") == 0) - argc--, argv++; - if (argc > 1) { - iflag = 0; /* exit on error */ - mflag = 0; - optschanged(); - for (i = 0; i < cmdenviron->count; i++) - setvareq(cmdenviron->args[i], VEXPORT|VSTACK); - shellexec(argv + 1, environment(), pathval(), 0); - - } - return 0; -} - - -int -timescmd(int argc __unused, char **argv __unused) -{ - struct rusage ru; - long shumins, shsmins, chumins, chsmins; - double shusecs, shssecs, chusecs, chssecs; - - if (getrusage(RUSAGE_SELF, &ru) < 0) - return 1; - shumins = ru.ru_utime.tv_sec / 60; - shusecs = ru.ru_utime.tv_sec % 60 + ru.ru_utime.tv_usec / 1000000.; - shsmins = ru.ru_stime.tv_sec / 60; - shssecs = ru.ru_stime.tv_sec % 60 + ru.ru_stime.tv_usec / 1000000.; - if (getrusage(RUSAGE_CHILDREN, &ru) < 0) - return 1; - chumins = ru.ru_utime.tv_sec / 60; - chusecs = ru.ru_utime.tv_sec % 60 + ru.ru_utime.tv_usec / 1000000.; - chsmins = ru.ru_stime.tv_sec / 60; - chssecs = ru.ru_stime.tv_sec % 60 + ru.ru_stime.tv_usec / 1000000.; - out1fmt("%ldm%.3fs %ldm%.3fs\n%ldm%.3fs %ldm%.3fs\n", shumins, - shusecs, shsmins, shssecs, chumins, chusecs, chsmins, chssecs); - return 0; -} diff --git a/bin/1sh/eval.h b/bin/1sh/eval.h deleted file mode 100644 index 7bfa0216..00000000 --- a/bin/1sh/eval.h +++ /dev/null @@ -1,70 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)eval.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/eval.h 314436 2017-02-28 23:42:47Z imp $ - */ - -extern char *commandname; /* currently executing command */ -extern int exitstatus; /* exit status of last command */ -extern int oexitstatus; /* saved exit status */ -extern struct arglist *cmdenviron; /* environment for builtin command */ - - -struct backcmd { /* result of evalbackcmd */ - int fd; /* file descriptor to read from */ - char *buf; /* buffer */ - int nleft; /* number of chars in buffer */ - struct job *jp; /* job structure for command */ -}; - -void reseteval(void); - -/* flags in argument to evaltree/evalstring */ -#define EV_EXIT 01 /* exit after evaluating tree */ -#define EV_TESTED 02 /* exit status is checked; ignore -e flag */ -#define EV_BACKCMD 04 /* command executing within back quotes */ - -void evalstring(const char *, int); -union node; /* BLETCH for ansi C */ -void evaltree(union node *, int); -void evalbackcmd(union node *, struct backcmd *); - -/* in_function returns nonzero if we are currently evaluating a function */ -#define in_function() funcnest -extern int funcnest; -extern int evalskip; -extern int skipcount; - -/* reasons for skipping commands (see comment on breakcmd routine) */ -#define SKIPBREAK 1 -#define SKIPCONT 2 -#define SKIPRETURN 3 diff --git a/bin/1sh/exec.c b/bin/1sh/exec.c deleted file mode 100644 index 5026e644..00000000 --- a/bin/1sh/exec.c +++ /dev/null @@ -1,784 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)exec.c 8.4 (Berkeley) 6/8/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/exec.c 336320 2018-07-15 21:55:17Z jilles $"); - -#include <sys/types.h> -#include <sys/stat.h> -#include <unistd.h> -#include <fcntl.h> -#include <errno.h> -#include <paths.h> -#include <stdlib.h> - -/* - * When commands are first encountered, they are entered in a hash table. - * This ensures that a full path search will not have to be done for them - * on each invocation. - * - * We should investigate converting to a linear search, even though that - * would make the command name "hash" a misnomer. - */ - -#include "shell.h" -#include "main.h" -#include "nodes.h" -#include "parser.h" -#include "redir.h" -#include "eval.h" -#include "exec.h" -#include "builtins.h" -#include "var.h" -#include "options.h" -#include "input.h" -#include "output.h" -#include "syntax.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "show.h" -#include "jobs.h" -#include "alias.h" - - -#define CMDTABLESIZE 31 /* should be prime */ - - - -struct tblentry { - struct tblentry *next; /* next entry in hash chain */ - union param param; /* definition of builtin function */ - int special; /* flag for special builtin commands */ - signed char cmdtype; /* index identifying command */ - char cmdname[]; /* name of command */ -}; - - -static struct tblentry *cmdtable[CMDTABLESIZE]; -static int cmdtable_cd = 0; /* cmdtable contains cd-dependent entries */ -int exerrno = 0; /* Last exec error */ - - -static void tryexec(char *, char **, char **); -static void printentry(struct tblentry *, int); -static struct tblentry *cmdlookup(const char *, int); -static void delete_cmd_entry(void); -static void addcmdentry(const char *, struct cmdentry *); - - - -/* - * Exec a program. Never returns. If you change this routine, you may - * have to change the find_command routine as well. - * - * The argv array may be changed and element argv[-1] should be writable. - */ - -void -shellexec(char **argv, char **envp, const char *path, int idx) -{ - char *cmdname; - const char *opt; - int e; - - if (strchr(argv[0], '/') != NULL) { - tryexec(argv[0], argv, envp); - e = errno; - } else { - e = ENOENT; - while ((cmdname = padvance(&path, &opt, argv[0])) != NULL) { - if (--idx < 0 && opt == NULL) { - tryexec(cmdname, argv, envp); - if (errno != ENOENT && errno != ENOTDIR) - e = errno; - if (e == ENOEXEC) - break; - } - stunalloc(cmdname); - } - } - - /* Map to POSIX errors */ - if (e == ENOENT || e == ENOTDIR) { - exerrno = 127; - exerror(EXEXEC, "%s: not found", argv[0]); - } else { - exerrno = 126; - exerror(EXEXEC, "%s: %s", argv[0], strerror(e)); - } -} - - -static void -tryexec(char *cmd, char **argv, char **envp) -{ - int e, in; - ssize_t n; - char buf[256]; - - execve(cmd, argv, envp); - e = errno; - if (e == ENOEXEC) { - INTOFF; - in = open(cmd, O_RDONLY | O_NONBLOCK); - if (in != -1) { - n = pread(in, buf, sizeof buf, 0); - close(in); - if (n > 0 && memchr(buf, '\0', n) != NULL) { - errno = ENOEXEC; - return; - } - } - *argv = cmd; - *--argv = __DECONST(char *, _PATH_BSHELL); - execve(_PATH_BSHELL, argv, envp); - } - errno = e; -} - -/* - * Do a path search. The variable path (passed by reference) should be - * set to the start of the path before the first call; padvance will update - * this value as it proceeds. Successive calls to padvance will return - * the possible path expansions in sequence. If popt is not NULL, options - * are processed: if an option (indicated by a percent sign) appears in - * the path entry then *popt will be set to point to it; else *popt will be - * set to NULL. If popt is NULL, percent signs are not special. - */ - -char * -padvance(const char **path, const char **popt, const char *name) -{ - const char *p, *start; - char *q; - size_t len, namelen; - - if (*path == NULL) - return NULL; - start = *path; - if (popt != NULL) - for (p = start; *p && *p != ':' && *p != '%'; p++) - ; /* nothing */ - else - for (p = start; *p && *p != ':'; p++) - ; /* nothing */ - namelen = strlen(name); - len = p - start + namelen + 2; /* "2" is for '/' and '\0' */ - STARTSTACKSTR(q); - CHECKSTRSPACE(len, q); - if (p != start) { - memcpy(q, start, p - start); - q += p - start; - *q++ = '/'; - } - memcpy(q, name, namelen + 1); - if (popt != NULL) { - if (*p == '%') { - *popt = ++p; - while (*p && *p != ':') p++; - } else - *popt = NULL; - } - if (*p == ':') - *path = p + 1; - else - *path = NULL; - return stalloc(len); -} - - - -/*** Command hashing code ***/ - - -int -hashcmd(int argc __unused, char **argv __unused) -{ - struct tblentry **pp; - struct tblentry *cmdp; - int c; - int verbose; - struct cmdentry entry; - char *name; - int errors; - - errors = 0; - verbose = 0; - while ((c = nextopt("rv")) != '\0') { - if (c == 'r') { - clearcmdentry(); - } else if (c == 'v') { - verbose++; - } - } - if (*argptr == NULL) { - for (pp = cmdtable ; pp < &cmdtable[CMDTABLESIZE] ; pp++) { - for (cmdp = *pp ; cmdp ; cmdp = cmdp->next) { - if (cmdp->cmdtype == CMDNORMAL) - printentry(cmdp, verbose); - } - } - return 0; - } - while ((name = *argptr) != NULL) { - if ((cmdp = cmdlookup(name, 0)) != NULL - && cmdp->cmdtype == CMDNORMAL) - delete_cmd_entry(); - find_command(name, &entry, DO_ERR, pathval()); - if (entry.cmdtype == CMDUNKNOWN) - errors = 1; - else if (verbose) { - cmdp = cmdlookup(name, 0); - if (cmdp != NULL) - printentry(cmdp, verbose); - else { - outfmt(out2, "%s: not found\n", name); - errors = 1; - } - flushall(); - } - argptr++; - } - return errors; -} - - -static void -printentry(struct tblentry *cmdp, int verbose) -{ - int idx; - const char *path, *opt; - char *name; - - if (cmdp->cmdtype == CMDNORMAL) { - idx = cmdp->param.index; - path = pathval(); - do { - name = padvance(&path, &opt, cmdp->cmdname); - stunalloc(name); - } while (--idx >= 0); - out1str(name); - } else if (cmdp->cmdtype == CMDBUILTIN) { - out1fmt("builtin %s", cmdp->cmdname); - } else if (cmdp->cmdtype == CMDFUNCTION) { - out1fmt("function %s", cmdp->cmdname); - if (verbose) { - INTOFF; - name = commandtext(getfuncnode(cmdp->param.func)); - out1c(' '); - out1str(name); - ckfree(name); - INTON; - } -#ifdef DEBUG - } else { - error("internal error: cmdtype %d", cmdp->cmdtype); -#endif - } - out1c('\n'); -} - - - -/* - * Resolve a command name. If you change this routine, you may have to - * change the shellexec routine as well. - */ - -void -find_command(const char *name, struct cmdentry *entry, int act, - const char *path) -{ - struct tblentry *cmdp, loc_cmd; - int idx; - const char *opt; - char *fullname; - struct stat statb; - int e; - int i; - int spec; - int cd; - - /* If name contains a slash, don't use the hash table */ - if (strchr(name, '/') != NULL) { - entry->cmdtype = CMDNORMAL; - entry->u.index = 0; - entry->special = 0; - return; - } - - cd = 0; - - /* If name is in the table, we're done */ - if ((cmdp = cmdlookup(name, 0)) != NULL) { - if (cmdp->cmdtype == CMDFUNCTION && act & DO_NOFUNC) - cmdp = NULL; - else - goto success; - } - - /* Check for builtin next */ - if ((i = find_builtin(name, &spec)) >= 0) { - INTOFF; - cmdp = cmdlookup(name, 1); - if (cmdp->cmdtype == CMDFUNCTION) - cmdp = &loc_cmd; - cmdp->cmdtype = CMDBUILTIN; - cmdp->param.index = i; - cmdp->special = spec; - INTON; - goto success; - } - - /* We have to search path. */ - - e = ENOENT; - idx = -1; - for (;(fullname = padvance(&path, &opt, name)) != NULL; - stunalloc(fullname)) { - idx++; - if (opt) { - if (strncmp(opt, "func", 4) == 0) { - /* handled below */ - } else { - continue; /* ignore unimplemented options */ - } - } - if (fullname[0] != '/') - cd = 1; - if (stat(fullname, &statb) < 0) { - if (errno != ENOENT && errno != ENOTDIR) - e = errno; - continue; - } - e = EACCES; /* if we fail, this will be the error */ - if (!S_ISREG(statb.st_mode)) - continue; - if (opt) { /* this is a %func directory */ - readcmdfile(fullname); - if ((cmdp = cmdlookup(name, 0)) == NULL || cmdp->cmdtype != CMDFUNCTION) - error("%s not defined in %s", name, fullname); - stunalloc(fullname); - goto success; - } -#ifdef notdef - if (statb.st_uid == geteuid()) { - if ((statb.st_mode & 0100) == 0) - goto loop; - } else if (statb.st_gid == getegid()) { - if ((statb.st_mode & 010) == 0) - goto loop; - } else { - if ((statb.st_mode & 01) == 0) - goto loop; - } -#endif - TRACE(("searchexec \"%s\" returns \"%s\"\n", name, fullname)); - INTOFF; - stunalloc(fullname); - cmdp = cmdlookup(name, 1); - if (cmdp->cmdtype == CMDFUNCTION) - cmdp = &loc_cmd; - cmdp->cmdtype = CMDNORMAL; - cmdp->param.index = idx; - cmdp->special = 0; - INTON; - goto success; - } - - if (act & DO_ERR) { - if (e == ENOENT || e == ENOTDIR) - outfmt(out2, "%s: not found\n", name); - else - outfmt(out2, "%s: %s\n", name, strerror(e)); - } - entry->cmdtype = CMDUNKNOWN; - entry->u.index = 0; - entry->special = 0; - return; - -success: - if (cd) - cmdtable_cd = 1; - entry->cmdtype = cmdp->cmdtype; - entry->u = cmdp->param; - entry->special = cmdp->special; -} - - - -/* - * Search the table of builtin commands. - */ - -int -find_builtin(const char *name, int *special) -{ - const unsigned char *bp; - size_t len; - - len = strlen(name); - for (bp = builtincmd ; *bp ; bp += 2 + bp[0]) { - if (bp[0] == len && memcmp(bp + 2, name, len) == 0) { - *special = (bp[1] & BUILTIN_SPECIAL) != 0; - return bp[1] & ~BUILTIN_SPECIAL; - } - } - return -1; -} - - - -/* - * Called when a cd is done. If any entry in cmdtable depends on the current - * directory, simply clear cmdtable completely. - */ - -void -hashcd(void) -{ - if (cmdtable_cd) - clearcmdentry(); -} - - - -/* - * Called before PATH is changed. The argument is the new value of PATH; - * pathval() still returns the old value at this point. Called with - * interrupts off. - */ - -void -changepath(const char *newval __unused) -{ - clearcmdentry(); -} - - -/* - * Clear out cached utility locations. - */ - -void -clearcmdentry(void) -{ - struct tblentry **tblp; - struct tblentry **pp; - struct tblentry *cmdp; - - INTOFF; - for (tblp = cmdtable ; tblp < &cmdtable[CMDTABLESIZE] ; tblp++) { - pp = tblp; - while ((cmdp = *pp) != NULL) { - if (cmdp->cmdtype == CMDNORMAL) { - *pp = cmdp->next; - ckfree(cmdp); - } else { - pp = &cmdp->next; - } - } - } - cmdtable_cd = 0; - INTON; -} - - -/* - * Locate a command in the command hash table. If "add" is nonzero, - * add the command to the table if it is not already present. The - * variable "lastcmdentry" is set to point to the address of the link - * pointing to the entry, so that delete_cmd_entry can delete the - * entry. - */ - -static struct tblentry **lastcmdentry; - - -static struct tblentry * -cmdlookup(const char *name, int add) -{ - unsigned int hashval; - const char *p; - struct tblentry *cmdp; - struct tblentry **pp; - size_t len; - - p = name; - hashval = (unsigned char)*p << 4; - while (*p) - hashval += *p++; - pp = &cmdtable[hashval % CMDTABLESIZE]; - for (cmdp = *pp ; cmdp ; cmdp = cmdp->next) { - if (equal(cmdp->cmdname, name)) - break; - pp = &cmdp->next; - } - if (add && cmdp == NULL) { - INTOFF; - len = strlen(name); - cmdp = *pp = ckmalloc(sizeof (struct tblentry) + len + 1); - cmdp->next = NULL; - cmdp->cmdtype = CMDUNKNOWN; - memcpy(cmdp->cmdname, name, len + 1); - INTON; - } - lastcmdentry = pp; - return cmdp; -} - -/* - * Delete the command entry returned on the last lookup. - */ - -static void -delete_cmd_entry(void) -{ - struct tblentry *cmdp; - - INTOFF; - cmdp = *lastcmdentry; - *lastcmdentry = cmdp->next; - ckfree(cmdp); - INTON; -} - - - -/* - * Add a new command entry, replacing any existing command entry for - * the same name. - */ - -static void -addcmdentry(const char *name, struct cmdentry *entry) -{ - struct tblentry *cmdp; - - INTOFF; - cmdp = cmdlookup(name, 1); - if (cmdp->cmdtype == CMDFUNCTION) { - unreffunc(cmdp->param.func); - } - cmdp->cmdtype = entry->cmdtype; - cmdp->param = entry->u; - cmdp->special = entry->special; - INTON; -} - - -/* - * Define a shell function. - */ - -void -defun(const char *name, union node *func) -{ - struct cmdentry entry; - - INTOFF; - entry.cmdtype = CMDFUNCTION; - entry.u.func = copyfunc(func); - entry.special = 0; - addcmdentry(name, &entry); - INTON; -} - - -/* - * Delete a function if it exists. - * Called with interrupts off. - */ - -int -unsetfunc(const char *name) -{ - struct tblentry *cmdp; - - if ((cmdp = cmdlookup(name, 0)) != NULL && cmdp->cmdtype == CMDFUNCTION) { - unreffunc(cmdp->param.func); - delete_cmd_entry(); - return (0); - } - return (0); -} - - -/* - * Check if a function by a certain name exists. - */ -int -isfunc(const char *name) -{ - struct tblentry *cmdp; - cmdp = cmdlookup(name, 0); - return (cmdp != NULL && cmdp->cmdtype == CMDFUNCTION); -} - - -/* - * Shared code for the following builtin commands: - * type, command -v, command -V - */ - -int -typecmd_impl(int argc, char **argv, int cmd, const char *path) -{ - struct cmdentry entry; - struct tblentry *cmdp; - const char *const *pp; - struct alias *ap; - int i; - int error1 = 0; - - if (path != pathval()) - clearcmdentry(); - - for (i = 1; i < argc; i++) { - /* First look at the keywords */ - for (pp = parsekwd; *pp; pp++) - if (**pp == *argv[i] && equal(*pp, argv[i])) - break; - - if (*pp) { - if (cmd == TYPECMD_SMALLV) - out1fmt("%s\n", argv[i]); - else - out1fmt("%s is a shell keyword\n", argv[i]); - continue; - } - - /* Then look at the aliases */ - if ((ap = lookupalias(argv[i], 1)) != NULL) { - if (cmd == TYPECMD_SMALLV) { - out1fmt("alias %s=", argv[i]); - out1qstr(ap->val); - outcslow('\n', out1); - } else - out1fmt("%s is an alias for %s\n", argv[i], - ap->val); - continue; - } - - /* Then check if it is a tracked alias */ - if ((cmdp = cmdlookup(argv[i], 0)) != NULL) { - entry.cmdtype = cmdp->cmdtype; - entry.u = cmdp->param; - entry.special = cmdp->special; - } - else { - /* Finally use brute force */ - find_command(argv[i], &entry, 0, path); - } - - switch (entry.cmdtype) { - case CMDNORMAL: { - if (strchr(argv[i], '/') == NULL) { - const char *path2 = path; - const char *opt2; - char *name; - int j = entry.u.index; - do { - name = padvance(&path2, &opt2, argv[i]); - stunalloc(name); - } while (--j >= 0); - if (cmd == TYPECMD_SMALLV) - out1fmt("%s\n", name); - else - out1fmt("%s is%s %s\n", argv[i], - (cmdp && cmd == TYPECMD_TYPE) ? - " a tracked alias for" : "", - name); - } else { - if (faccessat(AT_FDCWD, argv[i], X_OK, AT_EACCESS) == 0) { - if (cmd == TYPECMD_SMALLV) - out1fmt("%s\n", argv[i]); - else - out1fmt("%s is %s\n", argv[i], - argv[i]); - } else { - if (cmd != TYPECMD_SMALLV) - outfmt(out2, "%s: %s\n", - argv[i], strerror(errno)); - error1 |= 127; - } - } - break; - } - case CMDFUNCTION: - if (cmd == TYPECMD_SMALLV) - out1fmt("%s\n", argv[i]); - else - out1fmt("%s is a shell function\n", argv[i]); - break; - - case CMDBUILTIN: - if (cmd == TYPECMD_SMALLV) - out1fmt("%s\n", argv[i]); - else if (entry.special) - out1fmt("%s is a special shell builtin\n", - argv[i]); - else - out1fmt("%s is a shell builtin\n", argv[i]); - break; - - default: - if (cmd != TYPECMD_SMALLV) - outfmt(out2, "%s: not found\n", argv[i]); - error1 |= 127; - break; - } - } - - if (path != pathval()) - clearcmdentry(); - - return error1; -} - -/* - * Locate and print what a word is... - */ - -int -typecmd(int argc, char **argv) -{ - if (argc > 2 && strcmp(argv[1], "--") == 0) - argc--, argv++; - return typecmd_impl(argc, argv, TYPECMD_TYPE, bltinlookup("PATH", 1)); -} diff --git a/bin/1sh/exec.h b/bin/1sh/exec.h deleted file mode 100644 index 3b3a5b77..00000000 --- a/bin/1sh/exec.h +++ /dev/null @@ -1,76 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)exec.h 8.3 (Berkeley) 6/8/95 - * $FreeBSD: releng/12.0/bin/sh/exec.h 336320 2018-07-15 21:55:17Z jilles $ - */ - -/* values of cmdtype */ -#define CMDUNKNOWN -1 /* no entry in table for command */ -#define CMDNORMAL 0 /* command is an executable program */ -#define CMDBUILTIN 1 /* command is a shell builtin */ -#define CMDFUNCTION 2 /* command is a shell function */ - -/* values for typecmd_impl's third parameter */ -enum { - TYPECMD_SMALLV, /* command -v */ - TYPECMD_BIGV, /* command -V */ - TYPECMD_TYPE /* type */ -}; - -union node; -struct cmdentry { - int cmdtype; - union param { - int index; - struct funcdef *func; - } u; - int special; -}; - - -/* action to find_command() */ -#define DO_ERR 0x01 /* prints errors */ -#define DO_NOFUNC 0x02 /* don't return shell functions, for command */ - -extern int exerrno; /* last exec error */ - -void shellexec(char **, char **, const char *, int) __dead2; -char *padvance(const char **, const char **, const char *); -void find_command(const char *, struct cmdentry *, int, const char *); -int find_builtin(const char *, int *); -void hashcd(void); -void changepath(const char *); -void defun(const char *, union node *); -int unsetfunc(const char *); -int isfunc(const char *); -int typecmd_impl(int, char **, int, const char *); -void clearcmdentry(void); diff --git a/bin/1sh/expand.c b/bin/1sh/expand.c deleted file mode 100644 index 7c419b80..00000000 --- a/bin/1sh/expand.c +++ /dev/null @@ -1,1552 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * Copyright (c) 1997-2005 - * Herbert Xu <herbert@gondor.apana.org.au>. All rights reserved. - * Copyright (c) 2010-2015 - * Jilles Tjoelker <jilles@stack.nl>. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)expand.c 8.5 (Berkeley) 5/15/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/expand.c 338473 2018-09-05 19:16:09Z jilles $"); - -#include <sys/types.h> -#include <sys/time.h> -#include <sys/stat.h> -#include <dirent.h> -#include <errno.h> -#include <inttypes.h> -#include <limits.h> -#include <pwd.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <wchar.h> -#include <wctype.h> - -/* - * Routines to expand arguments to commands. We have to deal with - * backquotes, shell variables, and file metacharacters. - */ - -#include "shell.h" -#include "main.h" -#include "nodes.h" -#include "eval.h" -#include "expand.h" -#include "syntax.h" -#include "parser.h" -#include "jobs.h" -#include "options.h" -#include "var.h" -#include "input.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "arith.h" -#include "show.h" -#include "builtins.h" - -enum wordstate { WORD_IDLE, WORD_WS_DELIMITED, WORD_QUOTEMARK }; - -struct worddest { - struct arglist *list; - enum wordstate state; -}; - -static char *expdest; /* output of current string */ - -static const char *argstr(const char *, struct nodelist **restrict, int, - struct worddest *); -static const char *exptilde(const char *, int); -static const char *expari(const char *, struct nodelist **restrict, int, - struct worddest *); -static void expbackq(union node *, int, int, struct worddest *); -static const char *subevalvar_trim(const char *, struct nodelist **restrict, - int, int, int); -static const char *subevalvar_misc(const char *, struct nodelist **restrict, - const char *, int, int, int); -static const char *evalvar(const char *, struct nodelist **restrict, int, - struct worddest *); -static int varisset(const char *, int); -static void strtodest(const char *, int, int, int, struct worddest *); -static void reprocess(int, int, int, int, struct worddest *); -static void varvalue(const char *, int, int, int, struct worddest *); -static void expandmeta(char *, struct arglist *); -static void expmeta(char *, char *, struct arglist *); -static int expsortcmp(const void *, const void *); -static int patmatch(const char *, const char *); -static void cvtnum(int, char *); -static int collate_range_cmp(wchar_t, wchar_t); - -void -emptyarglist(struct arglist *list) -{ - - list->args = list->smallarg; - list->count = 0; - list->capacity = sizeof(list->smallarg) / sizeof(list->smallarg[0]); -} - -void -appendarglist(struct arglist *list, char *str) -{ - char **newargs; - int newcapacity; - - if (list->count >= list->capacity) { - newcapacity = list->capacity * 2; - if (newcapacity < 16) - newcapacity = 16; - if (newcapacity > INT_MAX / (int)sizeof(newargs[0])) - error("Too many entries in arglist"); - newargs = stalloc(newcapacity * sizeof(newargs[0])); - memcpy(newargs, list->args, list->count * sizeof(newargs[0])); - list->args = newargs; - list->capacity = newcapacity; - } - list->args[list->count++] = str; -} - -static int -collate_range_cmp(wchar_t c1, wchar_t c2) -{ - wchar_t s1[2], s2[2]; - - s1[0] = c1; - s1[1] = L'\0'; - s2[0] = c2; - s2[1] = L'\0'; - return (wcscoll(s1, s2)); -} - -static char * -stputs_quotes(const char *data, const char *syntax, char *p) -{ - while (*data) { - CHECKSTRSPACE(2, p); - if (syntax[(int)*data] == CCTL) - USTPUTC(CTLESC, p); - USTPUTC(*data++, p); - } - return (p); -} -#define STPUTS_QUOTES(data, syntax, p) p = stputs_quotes((data), syntax, p) - -static char * -nextword(char c, int flag, char *p, struct worddest *dst) -{ - int is_ws; - - is_ws = c == '\t' || c == '\n' || c == ' '; - if (p != stackblock() || (is_ws ? dst->state == WORD_QUOTEMARK : - dst->state != WORD_WS_DELIMITED) || c == '\0') { - STPUTC('\0', p); - if (flag & EXP_GLOB) - expandmeta(grabstackstr(p), dst->list); - else - appendarglist(dst->list, grabstackstr(p)); - dst->state = is_ws ? WORD_WS_DELIMITED : WORD_IDLE; - } else if (!is_ws && dst->state == WORD_WS_DELIMITED) - dst->state = WORD_IDLE; - /* Reserve space while the stack string is empty. */ - appendarglist(dst->list, NULL); - dst->list->count--; - STARTSTACKSTR(p); - return p; -} -#define NEXTWORD(c, flag, p, dstlist) p = nextword(c, flag, p, dstlist) - -static char * -stputs_split(const char *data, const char *syntax, int flag, char *p, - struct worddest *dst) -{ - const char *ifs; - char c; - - ifs = ifsset() ? ifsval() : " \t\n"; - while (*data) { - CHECKSTRSPACE(2, p); - c = *data++; - if (strchr(ifs, c) != NULL) { - NEXTWORD(c, flag, p, dst); - continue; - } - if (flag & EXP_GLOB && syntax[(int)c] == CCTL) - USTPUTC(CTLESC, p); - USTPUTC(c, p); - } - return (p); -} -#define STPUTS_SPLIT(data, syntax, flag, p, dst) p = stputs_split((data), syntax, flag, p, dst) - -/* - * Perform expansions on an argument, placing the resulting list of arguments - * in arglist. Parameter expansion, command substitution and arithmetic - * expansion are always performed; additional expansions can be requested - * via flag (EXP_*). - * The result is left in the stack string. - * When arglist is NULL, perform here document expansion. - * - * When doing something that may cause this to be re-entered, make sure - * the stack string is empty via grabstackstr() and do not assume expdest - * remains valid. - */ -void -expandarg(union node *arg, struct arglist *arglist, int flag) -{ - struct worddest exparg; - struct nodelist *argbackq; - - if (fflag) - flag &= ~EXP_GLOB; - argbackq = arg->narg.backquote; - exparg.list = arglist; - exparg.state = WORD_IDLE; - STARTSTACKSTR(expdest); - argstr(arg->narg.text, &argbackq, flag, &exparg); - if (arglist == NULL) { - STACKSTRNUL(expdest); - return; /* here document expanded */ - } - if ((flag & EXP_SPLIT) == 0 || expdest != stackblock() || - exparg.state == WORD_QUOTEMARK) { - STPUTC('\0', expdest); - if (flag & EXP_SPLIT) { - if (flag & EXP_GLOB) - expandmeta(grabstackstr(expdest), exparg.list); - else - appendarglist(exparg.list, grabstackstr(expdest)); - } - } - if ((flag & EXP_SPLIT) == 0) - appendarglist(arglist, grabstackstr(expdest)); -} - - - -/* - * Perform parameter expansion, command substitution and arithmetic - * expansion, and tilde expansion if requested via EXP_TILDE/EXP_VARTILDE. - * Processing ends at a CTLENDVAR or CTLENDARI character as well as '\0'. - * This is used to expand word in ${var+word} etc. - * If EXP_GLOB or EXP_CASE are set, keep and/or generate CTLESC - * characters to allow for further processing. - * - * If EXP_SPLIT is set, dst receives any complete words produced. - */ -static const char * -argstr(const char *p, struct nodelist **restrict argbackq, int flag, - struct worddest *dst) -{ - char c; - int quotes = flag & (EXP_GLOB | EXP_CASE); /* do CTLESC */ - int firsteq = 1; - int split_lit; - int lit_quoted; - - split_lit = flag & EXP_SPLIT_LIT; - lit_quoted = flag & EXP_LIT_QUOTED; - flag &= ~(EXP_SPLIT_LIT | EXP_LIT_QUOTED); - if (*p == '~' && (flag & (EXP_TILDE | EXP_VARTILDE))) - p = exptilde(p, flag); - for (;;) { - CHECKSTRSPACE(2, expdest); - switch (c = *p++) { - case '\0': - return (p - 1); - case CTLENDVAR: - case CTLENDARI: - return (p); - case CTLQUOTEMARK: - lit_quoted = 1; - /* "$@" syntax adherence hack */ - if (p[0] == CTLVAR && (p[1] & VSQUOTE) != 0 && - p[2] == '@' && p[3] == '=') - break; - if ((flag & EXP_SPLIT) != 0 && expdest == stackblock()) - dst->state = WORD_QUOTEMARK; - break; - case CTLQUOTEEND: - lit_quoted = 0; - break; - case CTLESC: - c = *p++; - if (split_lit && !lit_quoted && - strchr(ifsset() ? ifsval() : " \t\n", c) != NULL) { - NEXTWORD(c, flag, expdest, dst); - break; - } - if (quotes) - USTPUTC(CTLESC, expdest); - USTPUTC(c, expdest); - break; - case CTLVAR: - p = evalvar(p, argbackq, flag, dst); - break; - case CTLBACKQ: - case CTLBACKQ|CTLQUOTE: - expbackq((*argbackq)->n, c & CTLQUOTE, flag, dst); - *argbackq = (*argbackq)->next; - break; - case CTLARI: - p = expari(p, argbackq, flag, dst); - break; - case ':': - case '=': - /* - * sort of a hack - expand tildes in variable - * assignments (after the first '=' and after ':'s). - */ - if (split_lit && !lit_quoted && - strchr(ifsset() ? ifsval() : " \t\n", c) != NULL) { - NEXTWORD(c, flag, expdest, dst); - break; - } - USTPUTC(c, expdest); - if (flag & EXP_VARTILDE && *p == '~' && - (c != '=' || firsteq)) { - if (c == '=') - firsteq = 0; - p = exptilde(p, flag); - } - break; - default: - if (split_lit && !lit_quoted && - strchr(ifsset() ? ifsval() : " \t\n", c) != NULL) { - NEXTWORD(c, flag, expdest, dst); - break; - } - USTPUTC(c, expdest); - } - } -} - -/* - * Perform tilde expansion, placing the result in the stack string and - * returning the next position in the input string to process. - */ -static const char * -exptilde(const char *p, int flag) -{ - char c; - const char *startp = p; - const char *user; - struct passwd *pw; - char *home; - int len; - - for (;;) { - c = *p; - switch(c) { - case CTLESC: /* This means CTL* are always considered quoted. */ - case CTLVAR: - case CTLBACKQ: - case CTLBACKQ | CTLQUOTE: - case CTLARI: - case CTLENDARI: - case CTLQUOTEMARK: - return (startp); - case ':': - if ((flag & EXP_VARTILDE) == 0) - break; - /* FALLTHROUGH */ - case '\0': - case '/': - case CTLENDVAR: - len = p - startp - 1; - STPUTBIN(startp + 1, len, expdest); - STACKSTRNUL(expdest); - user = expdest - len; - if (*user == '\0') { - home = lookupvar("HOME"); - } else { - pw = getpwnam(user); - home = pw != NULL ? pw->pw_dir : NULL; - } - STADJUST(-len, expdest); - if (home == NULL || *home == '\0') - return (startp); - strtodest(home, flag, VSNORMAL, 1, NULL); - return (p); - } - p++; - } -} - - -/* - * Expand arithmetic expression. - */ -static const char * -expari(const char *p, struct nodelist **restrict argbackq, int flag, - struct worddest *dst) -{ - char *q, *start; - arith_t result; - int begoff; - int quoted; - int adj; - - quoted = *p++ == '"'; - begoff = expdest - stackblock(); - p = argstr(p, argbackq, 0, NULL); - STPUTC('\0', expdest); - start = stackblock() + begoff; - - q = grabstackstr(expdest); - result = arith(start); - ungrabstackstr(q, expdest); - - start = stackblock() + begoff; - adj = start - expdest; - STADJUST(adj, expdest); - - CHECKSTRSPACE((int)(DIGITS(result) + 1), expdest); - fmtstr(expdest, DIGITS(result), ARITH_FORMAT_STR, result); - adj = strlen(expdest); - STADJUST(adj, expdest); - /* - * If this is quoted, a '-' must not indicate a range in [...]. - * If this is not quoted, splitting may occur. - */ - if (quoted ? - result < 0 && begoff > 1 && flag & (EXP_GLOB | EXP_CASE) : - flag & EXP_SPLIT) - reprocess(expdest - adj - stackblock(), flag, VSNORMAL, quoted, - dst); - return p; -} - - -/* - * Perform command substitution. - */ -static void -expbackq(union node *cmd, int quoted, int flag, struct worddest *dst) -{ - struct backcmd in; - int i; - char buf[128]; - char *p; - char *dest = expdest; - char lastc; - char const *syntax = quoted? DQSYNTAX : BASESYNTAX; - int quotes = flag & (EXP_GLOB | EXP_CASE); - size_t nnl; - const char *ifs; - int startloc; - - INTOFF; - p = grabstackstr(dest); - evalbackcmd(cmd, &in); - ungrabstackstr(p, dest); - - p = in.buf; - startloc = dest - stackblock(); - nnl = 0; - if (!quoted && flag & EXP_SPLIT) - ifs = ifsset() ? ifsval() : " \t\n"; - else - ifs = ""; - /* Remove trailing newlines */ - for (;;) { - if (--in.nleft < 0) { - if (in.fd < 0) - break; - while ((i = read(in.fd, buf, sizeof buf)) < 0 && errno == EINTR) - ; - TRACE(("expbackq: read returns %d\n", i)); - if (i <= 0) - break; - p = buf; - in.nleft = i - 1; - } - lastc = *p++; - if (lastc == '\0') - continue; - if (nnl > 0 && lastc != '\n') { - NEXTWORD('\n', flag, dest, dst); - nnl = 0; - } - if (strchr(ifs, lastc) != NULL) { - if (lastc == '\n') - nnl++; - else - NEXTWORD(lastc, flag, dest, dst); - } else { - CHECKSTRSPACE(2, dest); - if (quotes && syntax[(int)lastc] == CCTL) - USTPUTC(CTLESC, dest); - USTPUTC(lastc, dest); - } - } - while (dest > stackblock() + startloc && STTOPC(dest) == '\n') - STUNPUTC(dest); - - if (in.fd >= 0) - close(in.fd); - if (in.buf) - ckfree(in.buf); - if (in.jp) { - p = grabstackstr(dest); - exitstatus = waitforjob(in.jp, (int *)NULL); - ungrabstackstr(p, dest); - } - TRACE(("expbackq: done\n")); - expdest = dest; - INTON; -} - - - -static void -recordleft(const char *str, const char *loc, char *startp) -{ - int amount; - - amount = ((str - 1) - (loc - startp)) - expdest; - STADJUST(amount, expdest); - while (loc != str - 1) - *startp++ = *loc++; -} - -static const char * -subevalvar_trim(const char *p, struct nodelist **restrict argbackq, int strloc, - int subtype, int startloc) -{ - char *startp; - char *loc = NULL; - char *str; - int c = 0; - int amount; - - p = argstr(p, argbackq, EXP_CASE | EXP_TILDE, NULL); - STACKSTRNUL(expdest); - startp = stackblock() + startloc; - str = stackblock() + strloc; - - switch (subtype) { - case VSTRIMLEFT: - for (loc = startp; loc < str; loc++) { - c = *loc; - *loc = '\0'; - if (patmatch(str, startp)) { - *loc = c; - recordleft(str, loc, startp); - return p; - } - *loc = c; - } - break; - - case VSTRIMLEFTMAX: - for (loc = str - 1; loc >= startp;) { - c = *loc; - *loc = '\0'; - if (patmatch(str, startp)) { - *loc = c; - recordleft(str, loc, startp); - return p; - } - *loc = c; - loc--; - } - break; - - case VSTRIMRIGHT: - for (loc = str - 1; loc >= startp;) { - if (patmatch(str, loc)) { - amount = loc - expdest; - STADJUST(amount, expdest); - return p; - } - loc--; - } - break; - - case VSTRIMRIGHTMAX: - for (loc = startp; loc < str - 1; loc++) { - if (patmatch(str, loc)) { - amount = loc - expdest; - STADJUST(amount, expdest); - return p; - } - } - break; - - - default: - abort(); - } - amount = (expdest - stackblock() - strloc) + 1; - STADJUST(-amount, expdest); - return p; -} - - -static const char * -subevalvar_misc(const char *p, struct nodelist **restrict argbackq, - const char *var, int subtype, int startloc, int varflags) -{ - char *startp; - int amount; - - p = argstr(p, argbackq, EXP_TILDE, NULL); - STACKSTRNUL(expdest); - startp = stackblock() + startloc; - - switch (subtype) { - case VSASSIGN: - setvar(var, startp, 0); - amount = startp - expdest; - STADJUST(amount, expdest); - return p; - - case VSQUESTION: - if (*p != CTLENDVAR) { - outfmt(out2, "%s\n", startp); - error((char *)NULL); - } - error("%.*s: parameter %snot set", (int)(p - var - 1), - var, (varflags & VSNUL) ? "null or " : ""); - - default: - abort(); - } -} - - -/* - * Expand a variable, and return a pointer to the next character in the - * input string. - */ - -static const char * -evalvar(const char *p, struct nodelist **restrict argbackq, int flag, - struct worddest *dst) -{ - int subtype; - int varflags; - const char *var; - const char *val; - int patloc; - int c; - int set; - int special; - int startloc; - int varlen; - int varlenb; - char buf[21]; - - varflags = (unsigned char)*p++; - subtype = varflags & VSTYPE; - var = p; - special = 0; - if (! is_name(*p)) - special = 1; - p = strchr(p, '=') + 1; - if (varflags & VSLINENO) { - set = 1; - special = 1; - val = NULL; - } else if (special) { - set = varisset(var, varflags & VSNUL); - val = NULL; - } else { - val = bltinlookup(var, 1); - if (val == NULL || ((varflags & VSNUL) && val[0] == '\0')) { - val = NULL; - set = 0; - } else - set = 1; - } - varlen = 0; - startloc = expdest - stackblock(); - if (!set && uflag && *var != '@' && *var != '*') { - switch (subtype) { - case VSNORMAL: - case VSTRIMLEFT: - case VSTRIMLEFTMAX: - case VSTRIMRIGHT: - case VSTRIMRIGHTMAX: - case VSLENGTH: - error("%.*s: parameter not set", (int)(p - var - 1), - var); - } - } - if (set && subtype != VSPLUS) { - /* insert the value of the variable */ - if (special) { - if (varflags & VSLINENO) { - if (p - var > (ptrdiff_t)sizeof(buf)) - abort(); - memcpy(buf, var, p - var - 1); - buf[p - var - 1] = '\0'; - strtodest(buf, flag, subtype, - varflags & VSQUOTE, dst); - } else - varvalue(var, varflags & VSQUOTE, subtype, flag, - dst); - if (subtype == VSLENGTH) { - varlenb = expdest - stackblock() - startloc; - varlen = varlenb; - if (localeisutf8) { - val = stackblock() + startloc; - for (;val != expdest; val++) - if ((*val & 0xC0) == 0x80) - varlen--; - } - STADJUST(-varlenb, expdest); - } - } else { - if (subtype == VSLENGTH) { - for (;*val; val++) - if (!localeisutf8 || - (*val & 0xC0) != 0x80) - varlen++; - } - else - strtodest(val, flag, subtype, - varflags & VSQUOTE, dst); - } - } - - if (subtype == VSPLUS) - set = ! set; - - switch (subtype) { - case VSLENGTH: - cvtnum(varlen, buf); - strtodest(buf, flag, VSNORMAL, varflags & VSQUOTE, dst); - break; - - case VSNORMAL: - return p; - - case VSPLUS: - case VSMINUS: - if (!set) { - return argstr(p, argbackq, - flag | (flag & EXP_SPLIT ? EXP_SPLIT_LIT : 0) | - (varflags & VSQUOTE ? EXP_LIT_QUOTED : 0), dst); - } - break; - - case VSTRIMLEFT: - case VSTRIMLEFTMAX: - case VSTRIMRIGHT: - case VSTRIMRIGHTMAX: - if (!set) - break; - /* - * Terminate the string and start recording the pattern - * right after it - */ - STPUTC('\0', expdest); - patloc = expdest - stackblock(); - p = subevalvar_trim(p, argbackq, patloc, subtype, startloc); - reprocess(startloc, flag, VSNORMAL, varflags & VSQUOTE, dst); - if (flag & EXP_SPLIT && *var == '@' && varflags & VSQUOTE) - dst->state = WORD_QUOTEMARK; - return p; - - case VSASSIGN: - case VSQUESTION: - if (!set) { - p = subevalvar_misc(p, argbackq, var, subtype, - startloc, varflags); - /* assert(subtype == VSASSIGN); */ - val = lookupvar(var); - strtodest(val, flag, subtype, varflags & VSQUOTE, dst); - return p; - } - break; - - case VSERROR: - c = p - var - 1; - error("${%.*s%s}: Bad substitution", c, var, - (c > 0 && *p != CTLENDVAR) ? "..." : ""); - - default: - abort(); - } - - { /* skip to end of alternative */ - int nesting = 1; - for (;;) { - if ((c = *p++) == CTLESC) - p++; - else if (c == CTLBACKQ || c == (CTLBACKQ|CTLQUOTE)) - *argbackq = (*argbackq)->next; - else if (c == CTLVAR) { - if ((*p++ & VSTYPE) != VSNORMAL) - nesting++; - } else if (c == CTLENDVAR) { - if (--nesting == 0) - break; - } - } - } - return p; -} - - - -/* - * Test whether a special or positional parameter is set. - */ - -static int -varisset(const char *name, int nulok) -{ - - if (*name == '!') - return backgndpidset(); - else if (*name == '@' || *name == '*') { - if (*shellparam.p == NULL) - return 0; - - if (nulok) { - char **av; - - for (av = shellparam.p; *av; av++) - if (**av != '\0') - return 1; - return 0; - } - } else if (is_digit(*name)) { - char *ap; - long num; - - errno = 0; - num = strtol(name, NULL, 10); - if (errno != 0 || num > shellparam.nparam) - return 0; - - if (num == 0) - ap = arg0; - else - ap = shellparam.p[num - 1]; - - if (nulok && (ap == NULL || *ap == '\0')) - return 0; - } - return 1; -} - -static void -strtodest(const char *p, int flag, int subtype, int quoted, - struct worddest *dst) -{ - if (subtype == VSLENGTH || subtype == VSTRIMLEFT || - subtype == VSTRIMLEFTMAX || subtype == VSTRIMRIGHT || - subtype == VSTRIMRIGHTMAX) - STPUTS(p, expdest); - else if (flag & EXP_SPLIT && !quoted && dst != NULL) - STPUTS_SPLIT(p, BASESYNTAX, flag, expdest, dst); - else if (flag & (EXP_GLOB | EXP_CASE)) - STPUTS_QUOTES(p, quoted ? DQSYNTAX : BASESYNTAX, expdest); - else - STPUTS(p, expdest); -} - -static void -reprocess(int startloc, int flag, int subtype, int quoted, - struct worddest *dst) -{ - static char *buf = NULL; - static size_t buflen = 0; - char *startp; - size_t len, zpos, zlen; - - startp = stackblock() + startloc; - len = expdest - startp; - if (len >= SIZE_MAX / 2 || len > PTRDIFF_MAX) - abort(); - INTOFF; - if (len >= buflen) { - ckfree(buf); - buf = NULL; - } - if (buflen < 128) - buflen = 128; - while (len >= buflen) - buflen <<= 1; - if (buf == NULL) - buf = ckmalloc(buflen); - INTON; - memcpy(buf, startp, len); - buf[len] = '\0'; - STADJUST(-(ptrdiff_t)len, expdest); - for (zpos = 0;;) { - zlen = strlen(buf + zpos); - strtodest(buf + zpos, flag, subtype, quoted, dst); - zpos += zlen + 1; - if (zpos == len + 1) - break; - if (flag & EXP_SPLIT && (quoted || (zlen > 0 && zpos < len))) - NEXTWORD('\0', flag, expdest, dst); - } -} - -/* - * Add the value of a special or positional parameter to the stack string. - */ - -static void -varvalue(const char *name, int quoted, int subtype, int flag, - struct worddest *dst) -{ - int num; - char *p; - int i; - int splitlater; - char sep[2]; - char **ap; - char buf[(NSHORTOPTS > 10 ? NSHORTOPTS : 10) + 1]; - - if (subtype == VSLENGTH) - flag &= ~EXP_FULL; - splitlater = subtype == VSTRIMLEFT || subtype == VSTRIMLEFTMAX || - subtype == VSTRIMRIGHT || subtype == VSTRIMRIGHTMAX; - - switch (*name) { - case '$': - num = rootpid; - break; - case '?': - num = oexitstatus; - break; - case '#': - num = shellparam.nparam; - break; - case '!': - num = backgndpidval(); - break; - case '-': - p = buf; - for (i = 0 ; i < NSHORTOPTS ; i++) { - if (optval[i]) - *p++ = optletter[i]; - } - *p = '\0'; - strtodest(buf, flag, subtype, quoted, dst); - return; - case '@': - if (flag & EXP_SPLIT && quoted) { - for (ap = shellparam.p ; (p = *ap++) != NULL ; ) { - strtodest(p, flag, subtype, quoted, dst); - if (*ap) { - if (splitlater) - STPUTC('\0', expdest); - else - NEXTWORD('\0', flag, expdest, - dst); - } - } - if (shellparam.nparam > 0) - dst->state = WORD_QUOTEMARK; - return; - } - /* FALLTHROUGH */ - case '*': - if (ifsset()) - sep[0] = ifsval()[0]; - else - sep[0] = ' '; - sep[1] = '\0'; - for (ap = shellparam.p ; (p = *ap++) != NULL ; ) { - strtodest(p, flag, subtype, quoted, dst); - if (!*ap) - break; - if (sep[0]) - strtodest(sep, flag, subtype, quoted, dst); - else if (flag & EXP_SPLIT && !quoted && **ap != '\0') { - if (splitlater) - STPUTC('\0', expdest); - else - NEXTWORD('\0', flag, expdest, dst); - } - } - return; - default: - if (is_digit(*name)) { - num = atoi(name); - if (num == 0) - p = arg0; - else if (num > 0 && num <= shellparam.nparam) - p = shellparam.p[num - 1]; - else - return; - strtodest(p, flag, subtype, quoted, dst); - } - return; - } - cvtnum(num, buf); - strtodest(buf, flag, subtype, quoted, dst); -} - - - -static char expdir[PATH_MAX]; -#define expdir_end (expdir + sizeof(expdir)) - -/* - * Perform pathname generation and remove control characters. - * At this point, the only control characters should be CTLESC. - * The results are stored in the list dstlist. - */ -static void -expandmeta(char *pattern, struct arglist *dstlist) -{ - char *p; - int firstmatch; - char c; - - firstmatch = dstlist->count; - p = pattern; - for (; (c = *p) != '\0'; p++) { - /* fast check for meta chars */ - if (c == '*' || c == '?' || c == '[') { - INTOFF; - expmeta(expdir, pattern, dstlist); - INTON; - break; - } - } - if (dstlist->count == firstmatch) { - /* - * no matches - */ - rmescapes(pattern); - appendarglist(dstlist, pattern); - } else { - qsort(&dstlist->args[firstmatch], - dstlist->count - firstmatch, - sizeof(dstlist->args[0]), expsortcmp); - } -} - - -/* - * Do metacharacter (i.e. *, ?, [...]) expansion. - */ - -static void -expmeta(char *enddir, char *name, struct arglist *arglist) -{ - const char *p; - const char *q; - const char *start; - char *endname; - int metaflag; - struct stat statb; - DIR *dirp; - struct dirent *dp; - int atend; - int matchdot; - int esc; - int namlen; - - metaflag = 0; - start = name; - for (p = name; esc = 0, *p; p += esc + 1) { - if (*p == '*' || *p == '?') - metaflag = 1; - else if (*p == '[') { - q = p + 1; - if (*q == '!' || *q == '^') - q++; - for (;;) { - if (*q == CTLESC) - q++; - if (*q == '/' || *q == '\0') - break; - if (*++q == ']') { - metaflag = 1; - break; - } - } - } else if (*p == '\0') - break; - else { - if (*p == CTLESC) - esc++; - if (p[esc] == '/') { - if (metaflag) - break; - start = p + esc + 1; - } - } - } - if (metaflag == 0) { /* we've reached the end of the file name */ - if (enddir != expdir) - metaflag++; - for (p = name ; ; p++) { - if (*p == CTLESC) - p++; - *enddir++ = *p; - if (*p == '\0') - break; - if (enddir == expdir_end) - return; - } - if (metaflag == 0 || lstat(expdir, &statb) >= 0) - appendarglist(arglist, stsavestr(expdir)); - return; - } - endname = name + (p - name); - if (start != name) { - p = name; - while (p < start) { - if (*p == CTLESC) - p++; - *enddir++ = *p++; - if (enddir == expdir_end) - return; - } - } - if (enddir == expdir) { - p = "."; - } else if (enddir == expdir + 1 && *expdir == '/') { - p = "/"; - } else { - p = expdir; - enddir[-1] = '\0'; - } - if ((dirp = opendir(p)) == NULL) - return; - if (enddir != expdir) - enddir[-1] = '/'; - if (*endname == 0) { - atend = 1; - } else { - atend = 0; - *endname = '\0'; - endname += esc + 1; - } - matchdot = 0; - p = start; - if (*p == CTLESC) - p++; - if (*p == '.') - matchdot++; - while (! int_pending() && (dp = readdir(dirp)) != NULL) { - if (dp->d_name[0] == '.' && ! matchdot) - continue; - if (patmatch(start, dp->d_name)) { - namlen = dp->d_namlen; - if (enddir + namlen + 1 > expdir_end) - continue; - memcpy(enddir, dp->d_name, namlen + 1); - if (atend) - appendarglist(arglist, stsavestr(expdir)); - else { - if (dp->d_type != DT_UNKNOWN && - dp->d_type != DT_DIR && - dp->d_type != DT_LNK) - continue; - if (enddir + namlen + 2 > expdir_end) - continue; - enddir[namlen] = '/'; - enddir[namlen + 1] = '\0'; - expmeta(enddir + namlen + 1, endname, arglist); - } - } - } - closedir(dirp); - if (! atend) - endname[-esc - 1] = esc ? CTLESC : '/'; -} - - -static int -expsortcmp(const void *p1, const void *p2) -{ - const char *s1 = *(const char * const *)p1; - const char *s2 = *(const char * const *)p2; - - return (strcoll(s1, s2)); -} - - - -static wchar_t -get_wc(const char **p) -{ - wchar_t c; - int chrlen; - - chrlen = mbtowc(&c, *p, 4); - if (chrlen == 0) - return 0; - else if (chrlen == -1) - c = 0; - else - *p += chrlen; - return c; -} - - -/* - * See if a character matches a character class, starting at the first colon - * of "[:class:]". - * If a valid character class is recognized, a pointer to the next character - * after the final closing bracket is stored into *end, otherwise a null - * pointer is stored into *end. - */ -static int -match_charclass(const char *p, wchar_t chr, const char **end) -{ - char name[20]; - const char *nameend; - wctype_t cclass; - - *end = NULL; - p++; - nameend = strstr(p, ":]"); - if (nameend == NULL || (size_t)(nameend - p) >= sizeof(name) || - nameend == p) - return 0; - memcpy(name, p, nameend - p); - name[nameend - p] = '\0'; - *end = nameend + 2; - cclass = wctype(name); - /* An unknown class matches nothing but is valid nevertheless. */ - if (cclass == 0) - return 0; - return iswctype(chr, cclass); -} - - -/* - * Returns true if the pattern matches the string. - */ - -static int -patmatch(const char *pattern, const char *string) -{ - const char *p, *q, *end; - const char *bt_p, *bt_q; - char c; - wchar_t wc, wc2; - - p = pattern; - q = string; - bt_p = NULL; - bt_q = NULL; - for (;;) { - switch (c = *p++) { - case '\0': - if (*q != '\0') - goto backtrack; - return 1; - case CTLESC: - if (*q++ != *p++) - goto backtrack; - break; - case '?': - if (*q == '\0') - return 0; - if (localeisutf8) { - wc = get_wc(&q); - /* - * A '?' does not match invalid UTF-8 but a - * '*' does, so backtrack. - */ - if (wc == 0) - goto backtrack; - } else - q++; - break; - case '*': - c = *p; - while (c == '*') - c = *++p; - /* - * If the pattern ends here, we know the string - * matches without needing to look at the rest of it. - */ - if (c == '\0') - return 1; - /* - * First try the shortest match for the '*' that - * could work. We can forget any earlier '*' since - * there is no way having it match more characters - * can help us, given that we are already here. - */ - bt_p = p; - bt_q = q; - break; - case '[': { - const char *savep, *saveq; - int invert, found; - wchar_t chr; - - savep = p, saveq = q; - invert = 0; - if (*p == '!' || *p == '^') { - invert++; - p++; - } - found = 0; - if (*q == '\0') - return 0; - if (localeisutf8) { - chr = get_wc(&q); - if (chr == 0) - goto backtrack; - } else - chr = (unsigned char)*q++; - c = *p++; - do { - if (c == '\0') { - p = savep, q = saveq; - c = '['; - goto dft; - } - if (c == '[' && *p == ':') { - found |= match_charclass(p, chr, &end); - if (end != NULL) { - p = end; - continue; - } - } - if (c == CTLESC) - c = *p++; - if (localeisutf8 && c & 0x80) { - p--; - wc = get_wc(&p); - if (wc == 0) /* bad utf-8 */ - return 0; - } else - wc = (unsigned char)c; - if (*p == '-' && p[1] != ']') { - p++; - if (*p == CTLESC) - p++; - if (localeisutf8) { - wc2 = get_wc(&p); - if (wc2 == 0) /* bad utf-8 */ - return 0; - } else - wc2 = (unsigned char)*p++; - if ( collate_range_cmp(chr, wc) >= 0 - && collate_range_cmp(chr, wc2) <= 0 - ) - found = 1; - } else { - if (chr == wc) - found = 1; - } - } while ((c = *p++) != ']'); - if (found == invert) - goto backtrack; - break; - } -dft: default: - if (*q == '\0') - return 0; - if (*q++ == c) - break; -backtrack: - /* - * If we have a mismatch (other than hitting the end - * of the string), go back to the last '*' seen and - * have it match one additional character. - */ - if (bt_p == NULL) - return 0; - if (*bt_q == '\0') - return 0; - bt_q++; - p = bt_p; - q = bt_q; - break; - } - } -} - - - -/* - * Remove any CTLESC and CTLQUOTEMARK characters from a string. - */ - -void -rmescapes(char *str) -{ - char *p, *q; - - p = str; - while (*p != CTLESC && *p != CTLQUOTEMARK && *p != CTLQUOTEEND) { - if (*p++ == '\0') - return; - } - q = p; - while (*p) { - if (*p == CTLQUOTEMARK || *p == CTLQUOTEEND) { - p++; - continue; - } - if (*p == CTLESC) - p++; - *q++ = *p++; - } - *q = '\0'; -} - - - -/* - * See if a pattern matches in a case statement. - */ - -int -casematch(union node *pattern, const char *val) -{ - struct stackmark smark; - struct nodelist *argbackq; - int result; - char *p; - - setstackmark(&smark); - argbackq = pattern->narg.backquote; - STARTSTACKSTR(expdest); - argstr(pattern->narg.text, &argbackq, EXP_TILDE | EXP_CASE, NULL); - STPUTC('\0', expdest); - p = grabstackstr(expdest); - result = patmatch(p, val); - popstackmark(&smark); - return result; -} - -/* - * Our own itoa(). - */ - -static void -cvtnum(int num, char *buf) -{ - char temp[32]; - int neg = num < 0; - char *p = temp + 31; - - temp[31] = '\0'; - - do { - *--p = num % 10 + '0'; - } while ((num /= 10) != 0); - - if (neg) - *--p = '-'; - - memcpy(buf, p, temp + 32 - p); -} - -/* - * Do most of the work for wordexp(3). - */ - -int -wordexpcmd(int argc, char **argv) -{ - size_t len; - int i; - - out1fmt("%08x", argc - 1); - for (i = 1, len = 0; i < argc; i++) - len += strlen(argv[i]); - out1fmt("%08x", (int)len); - for (i = 1; i < argc; i++) - outbin(argv[i], strlen(argv[i]) + 1, out1); - return (0); -} - -/* - * Do most of the work for wordexp(3), new version. - */ - -int -freebsd_wordexpcmd(int argc __unused, char **argv __unused) -{ - struct arglist arglist; - union node *args, *n; - size_t len; - int ch; - int protected = 0; - int fd = -1; - int i; - - while ((ch = nextopt("f:p")) != '\0') { - switch (ch) { - case 'f': - fd = number(shoptarg); - break; - case 'p': - protected = 1; - break; - } - } - if (*argptr != NULL) - error("wrong number of arguments"); - if (fd < 0) - error("missing fd"); - INTOFF; - setinputfd(fd, 1); - INTON; - args = parsewordexp(); - popfile(); /* will also close fd */ - if (protected) - for (n = args; n != NULL; n = n->narg.next) { - if (n->narg.backquote != NULL) { - outcslow('C', out1); - error("command substitution disabled"); - } - } - outcslow(' ', out1); - emptyarglist(&arglist); - for (n = args; n != NULL; n = n->narg.next) - expandarg(n, &arglist, EXP_FULL | EXP_TILDE); - for (i = 0, len = 0; i < arglist.count; i++) - len += strlen(arglist.args[i]); - out1fmt("%016x %016zx", arglist.count, len); - for (i = 0; i < arglist.count; i++) - outbin(arglist.args[i], strlen(arglist.args[i]) + 1, out1); - return (0); -} diff --git a/bin/1sh/expand.h b/bin/1sh/expand.h deleted file mode 100644 index 92e344d9..00000000 --- a/bin/1sh/expand.h +++ /dev/null @@ -1,62 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)expand.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/expand.h 314436 2017-02-28 23:42:47Z imp $ - */ - -struct arglist { - char **args; - int count; - int capacity; - char *smallarg[1]; -}; - -/* - * expandarg() flags - */ -#define EXP_SPLIT 0x1 /* perform word splitting */ -#define EXP_TILDE 0x2 /* do normal tilde expansion */ -#define EXP_VARTILDE 0x4 /* expand tildes in an assignment */ -#define EXP_CASE 0x10 /* keeps quotes around for CASE pattern */ -#define EXP_SPLIT_LIT 0x20 /* IFS split literal text ${v+-a b c} */ -#define EXP_LIT_QUOTED 0x40 /* for EXP_SPLIT_LIT, start off quoted */ -#define EXP_GLOB 0x80 /* perform file globbing */ - -#define EXP_FULL (EXP_SPLIT | EXP_GLOB) - - -void emptyarglist(struct arglist *); -void appendarglist(struct arglist *, char *); -union node; -void expandarg(union node *, struct arglist *, int); -void rmescapes(char *); -int casematch(union node *, const char *); diff --git a/bin/1sh/histedit.c b/bin/1sh/histedit.c deleted file mode 100644 index 12ff54b5..00000000 --- a/bin/1sh/histedit.c +++ /dev/null @@ -1,536 +0,0 @@ -/*- - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)histedit.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/histedit.c 319635 2017-06-06 21:08:05Z jilles $"); - -#include <sys/param.h> -#include <limits.h> -#include <paths.h> -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -/* - * Editline and history functions (and glue). - */ -#include "shell.h" -#include "parser.h" -#include "var.h" -#include "options.h" -#include "main.h" -#include "output.h" -#include "mystring.h" -#ifndef NO_HISTORY -#include "myhistedit.h" -#include "error.h" -#include "eval.h" -#include "memalloc.h" -#include "builtins.h" - -#define MAXHISTLOOPS 4 /* max recursions through fc */ -#define DEFEDITOR "ed" /* default editor *should* be $EDITOR */ - -History *hist; /* history cookie */ -EditLine *el; /* editline cookie */ -int displayhist; -static FILE *el_in, *el_out, *el_err; - -static void history_load(const char *hf); -static void history_save(const char *hf); - -static char *fc_replace(const char *, char *, char *); -static int not_fcnumber(const char *); -static int str_to_event(const char *, int); - -/* - * Set history and editing status. Called whenever the status may - * have changed (figures out what to do). - */ -void -histedit(void) -{ - -#define editing (Eflag || Vflag) - - if (iflag) { - if (!hist) { - /* - * turn history on - */ - INTOFF; - hist = history_init(); - INTON; - - if (hist != NULL) { - sethistsize(histsizeval()); - sethistfile(histfileval()); - } else - out2fmt_flush("sh: can't initialize history\n"); - } - if (editing && !el && isatty(0)) { /* && isatty(2) ??? */ - /* - * turn editing on - */ - char *term; - - INTOFF; - if (el_in == NULL) - el_in = fdopen(0, "r"); - if (el_err == NULL) - el_err = fdopen(1, "w"); - if (el_out == NULL) - el_out = fdopen(2, "w"); - if (el_in == NULL || el_err == NULL || el_out == NULL) - goto bad; - term = lookupvar("TERM"); - if (term) - setenv("TERM", term, 1); - else - unsetenv("TERM"); - el = el_init(arg0, el_in, el_out, el_err); - if (el != NULL) { - if (hist) - el_set(el, EL_HIST, history, hist); - el_set(el, EL_PROMPT, getprompt); - el_set(el, EL_RPROMPT, getrprompt); - el_set(el, EL_ADDFN, "sh-complete", - "Filename completion", - _el_fn_sh_complete); - } else { -bad: - out2fmt_flush("sh: can't initialize editing\n"); - } - INTON; - } else if (!editing && el) { - INTOFF; - el_end(el); - el = NULL; - INTON; - } - if (el) { - el_source(el, NULL); - if (Vflag) - el_set(el, EL_EDITOR, "vi"); - else if (Eflag) - el_set(el, EL_EDITOR, "emacs"); - el_set(el, EL_BIND, "^I", "sh-complete", NULL); - } - } else { - INTOFF; - if (el) { /* no editing if not interactive */ - el_end(el); - el = NULL; - } - if (hist) { - if (*histfileval() != '\0') - history_save(histfileval()); - history_end(hist); - hist = NULL; - } - INTON; - } -} - - -void -sethistfile(const char *hf) -{ - if (hist != NULL && hf != NULL && *hf != '\0') - history_load(hf); -} - - -static void -history_load(const char *hf) { - HistEvent he; - - if (history(hist, &he, H_LOAD, hf) == -1) - warning("%s: %s", he.str, hf); -} - - -static void -history_save(const char *hf) { - HistEvent he; - - if (history(hist, &he, H_SAVE, hf) == -1) - warning("%s: %s", he.str, hf); -} - - -void -sethistsize(const char *hs) -{ - int histsize; - HistEvent he; - - if (hist != NULL) { - if (hs == NULL || !is_number(hs)) - histsize = 100; - else - histsize = atoi(hs); - history(hist, &he, H_SETSIZE, histsize); - history(hist, &he, H_SETUNIQUE, 1); - } -} - -void -setterm(const char *term) -{ - if (rootshell && el != NULL && term != NULL) - el_set(el, EL_TERMINAL, term); -} - -int -histcmd(int argc, char **argv __unused) -{ - int ch; - const char *editor = NULL; - HistEvent he; - int lflg = 0, nflg = 0, rflg = 0, sflg = 0; - int i, retval; - const char *firststr, *laststr; - int first, last, direction; - char *pat = NULL, *repl = NULL; - static int active = 0; - struct jmploc jmploc; - struct jmploc *savehandler; - char editfilestr[PATH_MAX]; - char *volatile editfile; - FILE *efp = NULL; - int oldhistnum; - - if (hist == NULL) - error("history not active"); - - if (argc == 1) - error("missing history argument"); - - while (not_fcnumber(*argptr) && (ch = nextopt("e:lnrs")) != '\0') - switch ((char)ch) { - case 'e': - editor = shoptarg; - break; - case 'l': - lflg = 1; - break; - case 'n': - nflg = 1; - break; - case 'r': - rflg = 1; - break; - case 's': - sflg = 1; - break; - } - - savehandler = handler; - /* - * If executing... - */ - if (lflg == 0 || editor || sflg) { - lflg = 0; /* ignore */ - editfile = NULL; - /* - * Catch interrupts to reset active counter and - * cleanup temp files. - */ - if (setjmp(jmploc.loc)) { - active = 0; - if (editfile) - unlink(editfile); - handler = savehandler; - longjmp(handler->loc, 1); - } - handler = &jmploc; - if (++active > MAXHISTLOOPS) { - active = 0; - displayhist = 0; - error("called recursively too many times"); - } - /* - * Set editor. - */ - if (sflg == 0) { - if (editor == NULL && - (editor = bltinlookup("FCEDIT", 1)) == NULL && - (editor = bltinlookup("EDITOR", 1)) == NULL) - editor = DEFEDITOR; - if (editor[0] == '-' && editor[1] == '\0') { - sflg = 1; /* no edit */ - editor = NULL; - } - } - } - - /* - * If executing, parse [old=new] now - */ - if (lflg == 0 && *argptr != NULL && - ((repl = strchr(*argptr, '=')) != NULL)) { - pat = *argptr; - *repl++ = '\0'; - argptr++; - } - /* - * determine [first] and [last] - */ - if (*argptr == NULL) { - firststr = lflg ? "-16" : "-1"; - laststr = "-1"; - } else if (argptr[1] == NULL) { - firststr = argptr[0]; - laststr = lflg ? "-1" : argptr[0]; - } else if (argptr[2] == NULL) { - firststr = argptr[0]; - laststr = argptr[1]; - } else - error("too many arguments"); - /* - * Turn into event numbers. - */ - first = str_to_event(firststr, 0); - last = str_to_event(laststr, 1); - - if (rflg) { - i = last; - last = first; - first = i; - } - /* - * XXX - this should not depend on the event numbers - * always increasing. Add sequence numbers or offset - * to the history element in next (diskbased) release. - */ - direction = first < last ? H_PREV : H_NEXT; - - /* - * If editing, grab a temp file. - */ - if (editor) { - int fd; - INTOFF; /* easier */ - sprintf(editfilestr, "%s/_shXXXXXX", _PATH_TMP); - if ((fd = mkstemp(editfilestr)) < 0) - error("can't create temporary file %s", editfile); - editfile = editfilestr; - if ((efp = fdopen(fd, "w")) == NULL) { - close(fd); - error("Out of space"); - } - } - - /* - * Loop through selected history events. If listing or executing, - * do it now. Otherwise, put into temp file and call the editor - * after. - * - * The history interface needs rethinking, as the following - * convolutions will demonstrate. - */ - history(hist, &he, H_FIRST); - retval = history(hist, &he, H_NEXT_EVENT, first); - for (;retval != -1; retval = history(hist, &he, direction)) { - if (lflg) { - if (!nflg) - out1fmt("%5d ", he.num); - out1str(he.str); - } else { - const char *s = pat ? - fc_replace(he.str, pat, repl) : he.str; - - if (sflg) { - if (displayhist) { - out2str(s); - flushout(out2); - } - evalstring(s, 0); - if (displayhist && hist) { - /* - * XXX what about recursive and - * relative histnums. - */ - oldhistnum = he.num; - history(hist, &he, H_ENTER, s); - /* - * XXX H_ENTER moves the internal - * cursor, set it back to the current - * entry. - */ - history(hist, &he, - H_NEXT_EVENT, oldhistnum); - } - } else - fputs(s, efp); - } - /* - * At end? (if we were to lose last, we'd sure be - * messed up). - */ - if (he.num == last) - break; - } - if (editor) { - char *editcmd; - - fclose(efp); - INTON; - editcmd = stalloc(strlen(editor) + strlen(editfile) + 2); - sprintf(editcmd, "%s %s", editor, editfile); - evalstring(editcmd, 0); /* XXX - should use no JC command */ - readcmdfile(editfile); /* XXX - should read back - quick tst */ - unlink(editfile); - } - - if (lflg == 0 && active > 0) - --active; - if (displayhist) - displayhist = 0; - handler = savehandler; - return 0; -} - -static char * -fc_replace(const char *s, char *p, char *r) -{ - char *dest; - int plen = strlen(p); - - STARTSTACKSTR(dest); - while (*s) { - if (strncmp(s, p, plen) == 0) { - STPUTS(r, dest); - s += plen; - break; - } - STPUTC(*s++, dest); - } - STPUTS(s, dest); - STPUTC('\0', dest); - dest = grabstackstr(dest); - - return (dest); -} - -static int -not_fcnumber(const char *s) -{ - if (s == NULL) - return (0); - if (*s == '-') - s++; - return (!is_number(s)); -} - -static int -str_to_event(const char *str, int last) -{ - HistEvent he; - const char *s = str; - int relative = 0; - int i, retval; - - retval = history(hist, &he, H_FIRST); - switch (*s) { - case '-': - relative = 1; - /*FALLTHROUGH*/ - case '+': - s++; - } - if (is_number(s)) { - i = atoi(s); - if (relative) { - while (retval != -1 && i--) { - retval = history(hist, &he, H_NEXT); - } - if (retval == -1) - retval = history(hist, &he, H_LAST); - } else { - retval = history(hist, &he, H_NEXT_EVENT, i); - if (retval == -1) { - /* - * the notion of first and last is - * backwards to that of the history package - */ - retval = history(hist, &he, last ? H_FIRST : H_LAST); - } - } - if (retval == -1) - error("history number %s not found (internal error)", - str); - } else { - /* - * pattern - */ - retval = history(hist, &he, H_PREV_STR, str); - if (retval == -1) - error("history pattern not found: %s", str); - } - return (he.num); -} - -int -bindcmd(int argc, char **argv) -{ - - if (el == NULL) - error("line editing is disabled"); - return (el_parse(el, argc, __DECONST(const char **, argv))); -} - -#else -#include "error.h" - -int -histcmd(int argc, char **argv) -{ - - error("not compiled with history support"); - /*NOTREACHED*/ - return (0); -} - -int -bindcmd(int argc, char **argv) -{ - - error("not compiled with line editing support"); - return (0); -} -#endif diff --git a/bin/1sh/input.c b/bin/1sh/input.c deleted file mode 100644 index 24ba73b5..00000000 --- a/bin/1sh/input.c +++ /dev/null @@ -1,520 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)input.c 8.3 (Berkeley) 6/9/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/input.c 314436 2017-02-28 23:42:47Z imp $"); - -#include <stdio.h> /* defines BUFSIZ */ -#include <fcntl.h> -#include <errno.h> -#include <unistd.h> -#include <stdlib.h> -#include <string.h> - -/* - * This file implements the input routines used by the parser. - */ - -#include "shell.h" -#include "redir.h" -#include "syntax.h" -#include "input.h" -#include "output.h" -#include "options.h" -#include "memalloc.h" -#include "error.h" -#include "alias.h" -#include "parser.h" -#include "myhistedit.h" -#include "trap.h" - -#define EOF_NLEFT -99 /* value of parsenleft when EOF pushed back */ - -struct strpush { - struct strpush *prev; /* preceding string on stack */ - const char *prevstring; - int prevnleft; - int prevlleft; - struct alias *ap; /* if push was associated with an alias */ -}; - -/* - * The parsefile structure pointed to by the global variable parsefile - * contains information about the current file being read. - */ - -struct parsefile { - struct parsefile *prev; /* preceding file on stack */ - int linno; /* current line */ - int fd; /* file descriptor (or -1 if string) */ - int nleft; /* number of chars left in this line */ - int lleft; /* number of lines left in this buffer */ - const char *nextc; /* next char in buffer */ - char *buf; /* input buffer */ - struct strpush *strpush; /* for pushing strings at this level */ - struct strpush basestrpush; /* so pushing one is fast */ -}; - - -int plinno = 1; /* input line number */ -int parsenleft; /* copy of parsefile->nleft */ -static int parselleft; /* copy of parsefile->lleft */ -const char *parsenextc; /* copy of parsefile->nextc */ -static char basebuf[BUFSIZ + 1];/* buffer for top level input file */ -static struct parsefile basepf = { /* top level input file */ - .nextc = basebuf, - .buf = basebuf -}; -static struct parsefile *parsefile = &basepf; /* current input file */ -int whichprompt; /* 1 == PS1, 2 == PS2 */ - -EditLine *el; /* cookie for editline package */ - -static void pushfile(void); -static int preadfd(void); -static void popstring(void); - -void -resetinput(void) -{ - popallfiles(); - parselleft = parsenleft = 0; /* clear input buffer */ -} - - - -/* - * Read a character from the script, returning PEOF on end of file. - * Nul characters in the input are silently discarded. - */ - -int -pgetc(void) -{ - return pgetc_macro(); -} - - -static int -preadfd(void) -{ - int nr; - parsenextc = parsefile->buf; - -retry: -#ifndef NO_HISTORY - if (parsefile->fd == 0 && el) { - static const char *rl_cp; - static int el_len; - - if (rl_cp == NULL) { - el_resize(el); - rl_cp = el_gets(el, &el_len); - } - if (rl_cp == NULL) - nr = el_len == 0 ? 0 : -1; - else { - nr = el_len; - if (nr > BUFSIZ) - nr = BUFSIZ; - memcpy(parsefile->buf, rl_cp, nr); - if (nr != el_len) { - el_len -= nr; - rl_cp += nr; - } else - rl_cp = NULL; - } - } else -#endif - nr = read(parsefile->fd, parsefile->buf, BUFSIZ); - - if (nr <= 0) { - if (nr < 0) { - if (errno == EINTR) - goto retry; - if (parsefile->fd == 0 && errno == EWOULDBLOCK) { - int flags = fcntl(0, F_GETFL, 0); - if (flags >= 0 && flags & O_NONBLOCK) { - flags &=~ O_NONBLOCK; - if (fcntl(0, F_SETFL, flags) >= 0) { - out2fmt_flush("sh: turning off NDELAY mode\n"); - goto retry; - } - } - } - } - nr = -1; - } - return nr; -} - -/* - * Refill the input buffer and return the next input character: - * - * 1) If a string was pushed back on the input, pop it; - * 2) If an EOF was pushed back (parsenleft == EOF_NLEFT) or we are reading - * from a string so we can't refill the buffer, return EOF. - * 3) If there is more in this buffer, use it else call read to fill it. - * 4) Process input up to the next newline, deleting nul characters. - */ - -int -preadbuffer(void) -{ - char *p, *q, *r, *end; - char savec; - - while (parsefile->strpush) { - /* - * Add a space to the end of an alias to ensure that the - * alias remains in use while parsing its last word. - * This avoids alias recursions. - */ - if (parsenleft == -1 && parsefile->strpush->ap != NULL) - return ' '; - popstring(); - if (--parsenleft >= 0) - return (*parsenextc++); - } - if (parsenleft == EOF_NLEFT || parsefile->buf == NULL) - return PEOF; - -again: - if (parselleft <= 0) { - if ((parselleft = preadfd()) == -1) { - parselleft = parsenleft = EOF_NLEFT; - return PEOF; - } - } - - p = parsefile->buf + (parsenextc - parsefile->buf); - end = p + parselleft; - *end = '\0'; - q = strchr(p, '\n'); - if (!q) q = strchr(p, '\0'); - if (q != end && *q == '\0') { - /* delete nul characters */ - for (r = q; q != end; q++) { - if (*q != '\0') - *r++ = *q; - } - parselleft -= end - r; - if (parselleft == 0) - goto again; - end = p + parselleft; - *end = '\0'; - q = strchr(p, '\n'); - if (!q) q = strchr(p, '\0'); - } - if (q == end) { - parsenleft = parselleft; - parselleft = 0; - } else /* *q == '\n' */ { - q++; - parsenleft = q - parsenextc; - parselleft -= parsenleft; - } - parsenleft--; - - savec = *q; - *q = '\0'; - -#ifndef NO_HISTORY - if (parsefile->fd == 0 && hist && - parsenextc[strspn(parsenextc, " \t\n")] != '\0') { - HistEvent he; - INTOFF; - history(hist, &he, whichprompt == 1 ? H_ENTER : H_ADD, - parsenextc); - INTON; - } -#endif - - if (vflag) { - out2str(parsenextc); - flushout(out2); - } - - *q = savec; - - return *parsenextc++; -} - -/* - * Returns if we are certain we are at EOF. Does not cause any more input - * to be read from the outside world. - */ - -int -preadateof(void) -{ - if (parsenleft > 0) - return 0; - if (parsefile->strpush) - return 0; - if (parsenleft == EOF_NLEFT || parsefile->buf == NULL) - return 1; - return 0; -} - -/* - * Undo the last call to pgetc. Only one character may be pushed back. - * PEOF may be pushed back. - */ - -void -pungetc(void) -{ - parsenleft++; - parsenextc--; -} - -/* - * Push a string back onto the input at this current parsefile level. - * We handle aliases this way. - */ -void -pushstring(const char *s, int len, struct alias *ap) -{ - struct strpush *sp; - - INTOFF; -/*out2fmt_flush("*** calling pushstring: %s, %d\n", s, len);*/ - if (parsefile->strpush) { - sp = ckmalloc(sizeof (struct strpush)); - sp->prev = parsefile->strpush; - parsefile->strpush = sp; - } else - sp = parsefile->strpush = &(parsefile->basestrpush); - sp->prevstring = parsenextc; - sp->prevnleft = parsenleft; - sp->prevlleft = parselleft; - sp->ap = ap; - if (ap) - ap->flag |= ALIASINUSE; - parsenextc = s; - parsenleft = len; - INTON; -} - -static void -popstring(void) -{ - struct strpush *sp = parsefile->strpush; - - INTOFF; - if (sp->ap) { - if (parsenextc != sp->ap->val && - (parsenextc[-1] == ' ' || parsenextc[-1] == '\t')) - forcealias(); - sp->ap->flag &= ~ALIASINUSE; - } - parsenextc = sp->prevstring; - parsenleft = sp->prevnleft; - parselleft = sp->prevlleft; -/*out2fmt_flush("*** calling popstring: restoring to '%s'\n", parsenextc);*/ - parsefile->strpush = sp->prev; - if (sp != &(parsefile->basestrpush)) - ckfree(sp); - INTON; -} - -/* - * Set the input to take input from a file. If push is set, push the - * old input onto the stack first. - */ - -void -setinputfile(const char *fname, int push) -{ - int fd; - int fd2; - - INTOFF; - if ((fd = open(fname, O_RDONLY | O_CLOEXEC)) < 0) - error("cannot open %s: %s", fname, strerror(errno)); - if (fd < 10) { - fd2 = fcntl(fd, F_DUPFD_CLOEXEC, 10); - close(fd); - if (fd2 < 0) - error("Out of file descriptors"); - fd = fd2; - } - setinputfd(fd, push); - INTON; -} - - -/* - * Like setinputfile, but takes an open file descriptor (which should have - * its FD_CLOEXEC flag already set). Call this with interrupts off. - */ - -void -setinputfd(int fd, int push) -{ - if (push) { - pushfile(); - parsefile->buf = ckmalloc(BUFSIZ + 1); - } - if (parsefile->fd > 0) - close(parsefile->fd); - parsefile->fd = fd; - if (parsefile->buf == NULL) - parsefile->buf = ckmalloc(BUFSIZ + 1); - parselleft = parsenleft = 0; - plinno = 1; -} - - -/* - * Like setinputfile, but takes input from a string. - */ - -void -setinputstring(const char *string, int push) -{ - INTOFF; - if (push) - pushfile(); - parsenextc = string; - parselleft = parsenleft = strlen(string); - parsefile->buf = NULL; - plinno = 1; - INTON; -} - - - -/* - * To handle the "." command, a stack of input files is used. Pushfile - * adds a new entry to the stack and popfile restores the previous level. - */ - -static void -pushfile(void) -{ - struct parsefile *pf; - - parsefile->nleft = parsenleft; - parsefile->lleft = parselleft; - parsefile->nextc = parsenextc; - parsefile->linno = plinno; - pf = (struct parsefile *)ckmalloc(sizeof (struct parsefile)); - pf->prev = parsefile; - pf->fd = -1; - pf->strpush = NULL; - pf->basestrpush.prev = NULL; - parsefile = pf; -} - - -void -popfile(void) -{ - struct parsefile *pf = parsefile; - - INTOFF; - if (pf->fd >= 0) - close(pf->fd); - if (pf->buf) - ckfree(pf->buf); - while (pf->strpush) - popstring(); - parsefile = pf->prev; - ckfree(pf); - parsenleft = parsefile->nleft; - parselleft = parsefile->lleft; - parsenextc = parsefile->nextc; - plinno = parsefile->linno; - INTON; -} - - -/* - * Return current file (to go back to it later using popfilesupto()). - */ - -struct parsefile * -getcurrentfile(void) -{ - return parsefile; -} - - -/* - * Pop files until the given file is on top again. Useful for regular - * builtins that read shell commands from files or strings. - * If the given file is not an active file, an error is raised. - */ - -void -popfilesupto(struct parsefile *file) -{ - while (parsefile != file && parsefile != &basepf) - popfile(); - if (parsefile != file) - error("popfilesupto() misused"); -} - -/* - * Return to top level. - */ - -void -popallfiles(void) -{ - while (parsefile != &basepf) - popfile(); -} - - - -/* - * Close the file(s) that the shell is reading commands from. Called - * after a fork is done. - */ - -void -closescript(void) -{ - popallfiles(); - if (parsefile->fd > 0) { - close(parsefile->fd); - parsefile->fd = 0; - } -} diff --git a/bin/1sh/input.h b/bin/1sh/input.h deleted file mode 100644 index 2a04921d..00000000 --- a/bin/1sh/input.h +++ /dev/null @@ -1,65 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)input.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/input.h 314436 2017-02-28 23:42:47Z imp $ - */ - -/* PEOF (the end of file marker) is defined in syntax.h */ - -/* - * The input line number. Input.c just defines this variable, and saves - * and restores it when files are pushed and popped. The user of this - * package must set its value. - */ -extern int plinno; -extern int parsenleft; /* number of characters left in input buffer */ -extern const char *parsenextc; /* next character in input buffer */ - -struct alias; -struct parsefile; - -void resetinput(void); -int pgetc(void); -int preadbuffer(void); -int preadateof(void); -void pungetc(void); -void pushstring(const char *, int, struct alias *); -void setinputfile(const char *, int); -void setinputfd(int, int); -void setinputstring(const char *, int); -void popfile(void); -struct parsefile *getcurrentfile(void); -void popfilesupto(struct parsefile *); -void popallfiles(void); -void closescript(void); - -#define pgetc_macro() (--parsenleft >= 0? *parsenextc++ : preadbuffer()) diff --git a/bin/1sh/jobs.c b/bin/1sh/jobs.c deleted file mode 100644 index 88703edd..00000000 --- a/bin/1sh/jobs.c +++ /dev/null @@ -1,1552 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)jobs.c 8.5 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/jobs.c 328818 2018-02-02 22:53:58Z jilles $"); - -#include <sys/ioctl.h> -#include <sys/param.h> -#include <sys/resource.h> -#include <sys/time.h> -#include <sys/wait.h> -#include <errno.h> -#include <fcntl.h> -#include <paths.h> -#include <signal.h> -#include <stddef.h> -#include <stdlib.h> -#include <unistd.h> - -#include "shell.h" -#if JOBS -#include <termios.h> -#undef CEOF /* syntax.h redefines this */ -#endif -#include "redir.h" -#include "exec.h" -#include "show.h" -#include "main.h" -#include "parser.h" -#include "nodes.h" -#include "jobs.h" -#include "options.h" -#include "trap.h" -#include "syntax.h" -#include "input.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "var.h" -#include "builtins.h" - - -/* - * A job structure contains information about a job. A job is either a - * single process or a set of processes contained in a pipeline. In the - * latter case, pidlist will be non-NULL, and will point to a -1 terminated - * array of pids. - */ - -struct procstat { - pid_t pid; /* process id */ - int status; /* status flags (defined above) */ - char *cmd; /* text of command being run */ -}; - - -/* states */ -#define JOBSTOPPED 1 /* all procs are stopped */ -#define JOBDONE 2 /* all procs are completed */ - - -struct job { - struct procstat ps0; /* status of process */ - struct procstat *ps; /* status or processes when more than one */ - short nprocs; /* number of processes */ - pid_t pgrp; /* process group of this job */ - char state; /* true if job is finished */ - char used; /* true if this entry is in used */ - char changed; /* true if status has changed */ - char foreground; /* true if running in the foreground */ - char remembered; /* true if $! referenced */ -#if JOBS - char jobctl; /* job running under job control */ - struct job *next; /* job used after this one */ -#endif -}; - - -static struct job *jobtab; /* array of jobs */ -static int njobs; /* size of array */ -static pid_t backgndpid = -1; /* pid of last background process */ -static struct job *bgjob = NULL; /* last background process */ -#if JOBS -static struct job *jobmru; /* most recently used job list */ -static pid_t initialpgrp; /* pgrp of shell on invocation */ -#endif -static int ttyfd = -1; - -/* mode flags for dowait */ -#define DOWAIT_BLOCK 0x1 /* wait until a child exits */ -#define DOWAIT_SIG 0x2 /* if DOWAIT_BLOCK, abort on signal */ -#define DOWAIT_SIG_TRAP 0x4 /* if DOWAIT_SIG, abort on trapped signal only */ - -#if JOBS -static void restartjob(struct job *); -#endif -static void freejob(struct job *); -static int waitcmdloop(struct job *); -static struct job *getjob_nonotfound(const char *); -static struct job *getjob(const char *); -pid_t killjob(const char *, int); -static pid_t dowait(int, struct job *); -static void checkzombies(void); -static void cmdtxt(union node *); -static void cmdputs(const char *); -#if JOBS -static void setcurjob(struct job *); -static void deljob(struct job *); -static struct job *getcurjob(struct job *); -#endif -static void printjobcmd(struct job *); -static void showjob(struct job *, int); - - -/* - * Turn job control on and off. - */ - -static int jobctl; - -#if JOBS -static void -jobctl_notty(void) -{ - if (ttyfd >= 0) { - close(ttyfd); - ttyfd = -1; - } - if (!iflag) { - setsignal(SIGTSTP); - setsignal(SIGTTOU); - setsignal(SIGTTIN); - jobctl = 1; - return; - } - out2fmt_flush("sh: can't access tty; job control turned off\n"); - mflag = 0; -} - -void -setjobctl(int on) -{ - int i; - - if (on == jobctl || rootshell == 0) - return; - if (on) { - if (ttyfd != -1) - close(ttyfd); - if ((ttyfd = open(_PATH_TTY, O_RDWR | O_CLOEXEC)) < 0) { - i = 0; - while (i <= 2 && !isatty(i)) - i++; - if (i > 2 || - (ttyfd = fcntl(i, F_DUPFD_CLOEXEC, 10)) < 0) { - jobctl_notty(); - return; - } - } - if (ttyfd < 10) { - /* - * Keep our TTY file descriptor out of the way of - * the user's redirections. - */ - if ((i = fcntl(ttyfd, F_DUPFD_CLOEXEC, 10)) < 0) { - jobctl_notty(); - return; - } - close(ttyfd); - ttyfd = i; - } - do { /* while we are in the background */ - initialpgrp = tcgetpgrp(ttyfd); - if (initialpgrp < 0) { - jobctl_notty(); - return; - } - if (initialpgrp != getpgrp()) { - if (!iflag) { - initialpgrp = -1; - jobctl_notty(); - return; - } - kill(0, SIGTTIN); - continue; - } - } while (0); - setsignal(SIGTSTP); - setsignal(SIGTTOU); - setsignal(SIGTTIN); - setpgid(0, rootpid); - tcsetpgrp(ttyfd, rootpid); - } else { /* turning job control off */ - setpgid(0, initialpgrp); - if (ttyfd >= 0) { - tcsetpgrp(ttyfd, initialpgrp); - close(ttyfd); - ttyfd = -1; - } - setsignal(SIGTSTP); - setsignal(SIGTTOU); - setsignal(SIGTTIN); - } - jobctl = on; -} -#endif - - -#if JOBS -int -fgcmd(int argc __unused, char **argv __unused) -{ - struct job *jp; - pid_t pgrp; - int status; - - nextopt(""); - jp = getjob(*argptr); - if (jp->jobctl == 0) - error("job not created under job control"); - printjobcmd(jp); - flushout(&output); - pgrp = jp->ps[0].pid; - if (ttyfd >= 0) - tcsetpgrp(ttyfd, pgrp); - restartjob(jp); - jp->foreground = 1; - INTOFF; - status = waitforjob(jp, (int *)NULL); - INTON; - return status; -} - - -int -bgcmd(int argc __unused, char **argv __unused) -{ - struct job *jp; - - nextopt(""); - do { - jp = getjob(*argptr); - if (jp->jobctl == 0) - error("job not created under job control"); - if (jp->state == JOBDONE) - continue; - restartjob(jp); - jp->foreground = 0; - out1fmt("[%td] ", jp - jobtab + 1); - printjobcmd(jp); - } while (*argptr != NULL && *++argptr != NULL); - return 0; -} - - -static void -restartjob(struct job *jp) -{ - struct procstat *ps; - int i; - - if (jp->state == JOBDONE) - return; - setcurjob(jp); - INTOFF; - kill(-jp->ps[0].pid, SIGCONT); - for (ps = jp->ps, i = jp->nprocs ; --i >= 0 ; ps++) { - if (WIFSTOPPED(ps->status)) { - ps->status = -1; - jp->state = 0; - } - } - INTON; -} -#endif - - -int -jobscmd(int argc __unused, char *argv[] __unused) -{ - char *id; - int ch, mode; - - mode = SHOWJOBS_DEFAULT; - while ((ch = nextopt("lps")) != '\0') { - switch (ch) { - case 'l': - mode = SHOWJOBS_VERBOSE; - break; - case 'p': - mode = SHOWJOBS_PGIDS; - break; - case 's': - mode = SHOWJOBS_PIDS; - break; - } - } - - if (*argptr == NULL) - showjobs(0, mode); - else - while ((id = *argptr++) != NULL) - showjob(getjob(id), mode); - - return (0); -} - -static void -printjobcmd(struct job *jp) -{ - struct procstat *ps; - int i; - - for (ps = jp->ps, i = jp->nprocs ; --i >= 0 ; ps++) { - out1str(ps->cmd); - if (i > 0) - out1str(" | "); - } - out1c('\n'); -} - -static void -showjob(struct job *jp, int mode) -{ - char s[64]; - char statebuf[16]; - const char *statestr, *coredump; - struct procstat *ps; - struct job *j; - int col, curr, i, jobno, prev, procno, status; - char c; - - procno = (mode == SHOWJOBS_PGIDS) ? 1 : jp->nprocs; - jobno = jp - jobtab + 1; - curr = prev = 0; -#if JOBS - if ((j = getcurjob(NULL)) != NULL) { - curr = j - jobtab + 1; - if ((j = getcurjob(j)) != NULL) - prev = j - jobtab + 1; - } -#endif - coredump = ""; - status = jp->ps[jp->nprocs - 1].status; - if (jp->state == 0) { - statestr = "Running"; -#if JOBS - } else if (jp->state == JOBSTOPPED) { - ps = jp->ps + jp->nprocs - 1; - while (!WIFSTOPPED(ps->status) && ps > jp->ps) - ps--; - if (WIFSTOPPED(ps->status)) - i = WSTOPSIG(ps->status); - else - i = -1; - statestr = strsignal(i); - if (statestr == NULL) - statestr = "Suspended"; -#endif - } else if (WIFEXITED(status)) { - if (WEXITSTATUS(status) == 0) - statestr = "Done"; - else { - fmtstr(statebuf, sizeof(statebuf), "Done(%d)", - WEXITSTATUS(status)); - statestr = statebuf; - } - } else { - i = WTERMSIG(status); - statestr = strsignal(i); - if (statestr == NULL) - statestr = "Unknown signal"; - if (WCOREDUMP(status)) - coredump = " (core dumped)"; - } - - for (ps = jp->ps ; procno > 0 ; ps++, procno--) { /* for each process */ - if (mode == SHOWJOBS_PIDS || mode == SHOWJOBS_PGIDS) { - out1fmt("%d\n", (int)ps->pid); - continue; - } - if (mode != SHOWJOBS_VERBOSE && ps != jp->ps) - continue; - if (jobno == curr && ps == jp->ps) - c = '+'; - else if (jobno == prev && ps == jp->ps) - c = '-'; - else - c = ' '; - if (ps == jp->ps) - fmtstr(s, 64, "[%d] %c ", jobno, c); - else - fmtstr(s, 64, " %c ", c); - out1str(s); - col = strlen(s); - if (mode == SHOWJOBS_VERBOSE) { - fmtstr(s, 64, "%d ", (int)ps->pid); - out1str(s); - col += strlen(s); - } - if (ps == jp->ps) { - out1str(statestr); - out1str(coredump); - col += strlen(statestr) + strlen(coredump); - } - do { - out1c(' '); - col++; - } while (col < 30); - if (mode == SHOWJOBS_VERBOSE) { - out1str(ps->cmd); - out1c('\n'); - } else - printjobcmd(jp); - } -} - -/* - * Print a list of jobs. If "change" is nonzero, only print jobs whose - * statuses have changed since the last call to showjobs. - * - * If the shell is interrupted in the process of creating a job, the - * result may be a job structure containing zero processes. Such structures - * will be freed here. - */ - -void -showjobs(int change, int mode) -{ - int jobno; - struct job *jp; - - TRACE(("showjobs(%d) called\n", change)); - checkzombies(); - for (jobno = 1, jp = jobtab ; jobno <= njobs ; jobno++, jp++) { - if (! jp->used) - continue; - if (jp->nprocs == 0) { - freejob(jp); - continue; - } - if (change && ! jp->changed) - continue; - showjob(jp, mode); - if (mode == SHOWJOBS_DEFAULT || mode == SHOWJOBS_VERBOSE) { - jp->changed = 0; - /* Hack: discard jobs for which $! has not been - * referenced in interactive mode when they terminate. - */ - if (jp->state == JOBDONE && !jp->remembered && - (iflag || jp != bgjob)) { - freejob(jp); - } - } - } -} - - -/* - * Mark a job structure as unused. - */ - -static void -freejob(struct job *jp) -{ - struct procstat *ps; - int i; - - INTOFF; - if (bgjob == jp) - bgjob = NULL; - for (i = jp->nprocs, ps = jp->ps ; --i >= 0 ; ps++) { - if (ps->cmd != nullstr) - ckfree(ps->cmd); - } - if (jp->ps != &jp->ps0) - ckfree(jp->ps); - jp->used = 0; -#if JOBS - deljob(jp); -#endif - INTON; -} - - - -int -waitcmd(int argc __unused, char **argv __unused) -{ - struct job *job; - int retval; - - nextopt(""); - if (*argptr == NULL) - return (waitcmdloop(NULL)); - - do { - job = getjob_nonotfound(*argptr); - if (job == NULL) - retval = 127; - else - retval = waitcmdloop(job); - argptr++; - } while (*argptr != NULL); - - return (retval); -} - -static int -waitcmdloop(struct job *job) -{ - int status, retval, sig; - struct job *jp; - - /* - * Loop until a process is terminated or stopped, or a SIGINT is - * received. - */ - - do { - if (job != NULL) { - if (job->state == JOBDONE) { - status = job->ps[job->nprocs - 1].status; - if (WIFEXITED(status)) - retval = WEXITSTATUS(status); - else - retval = WTERMSIG(status) + 128; - if (! iflag || ! job->changed) - freejob(job); - else { - job->remembered = 0; - if (job == bgjob) - bgjob = NULL; - } - return retval; - } - } else { - for (jp = jobtab ; jp < jobtab + njobs; jp++) - if (jp->used && jp->state == JOBDONE) { - if (! iflag || ! jp->changed) - freejob(jp); - else { - jp->remembered = 0; - if (jp == bgjob) - bgjob = NULL; - } - } - for (jp = jobtab ; ; jp++) { - if (jp >= jobtab + njobs) { /* no running procs */ - return 0; - } - if (jp->used && jp->state == 0) - break; - } - } - } while (dowait(DOWAIT_BLOCK | DOWAIT_SIG, (struct job *)NULL) != -1); - - sig = pendingsig_waitcmd; - pendingsig_waitcmd = 0; - return sig + 128; -} - - - -int -jobidcmd(int argc __unused, char **argv __unused) -{ - struct job *jp; - int i; - - nextopt(""); - jp = getjob(*argptr); - for (i = 0 ; i < jp->nprocs ; ) { - out1fmt("%d", (int)jp->ps[i].pid); - out1c(++i < jp->nprocs? ' ' : '\n'); - } - return 0; -} - - - -/* - * Convert a job name to a job structure. - */ - -static struct job * -getjob_nonotfound(const char *name) -{ - int jobno; - struct job *found, *jp; - size_t namelen; - pid_t pid; - int i; - - if (name == NULL) { -#if JOBS - name = "%+"; -#else - error("No current job"); -#endif - } - if (name[0] == '%') { - if (is_digit(name[1])) { - jobno = number(name + 1); - if (jobno > 0 && jobno <= njobs - && jobtab[jobno - 1].used != 0) - return &jobtab[jobno - 1]; -#if JOBS - } else if ((name[1] == '%' || name[1] == '+') && - name[2] == '\0') { - if ((jp = getcurjob(NULL)) == NULL) - error("No current job"); - return (jp); - } else if (name[1] == '-' && name[2] == '\0') { - if ((jp = getcurjob(NULL)) == NULL || - (jp = getcurjob(jp)) == NULL) - error("No previous job"); - return (jp); -#endif - } else if (name[1] == '?') { - found = NULL; - for (jp = jobtab, i = njobs ; --i >= 0 ; jp++) { - if (jp->used && jp->nprocs > 0 - && strstr(jp->ps[0].cmd, name + 2) != NULL) { - if (found) - error("%s: ambiguous", name); - found = jp; - } - } - if (found != NULL) - return (found); - } else { - namelen = strlen(name); - found = NULL; - for (jp = jobtab, i = njobs ; --i >= 0 ; jp++) { - if (jp->used && jp->nprocs > 0 - && strncmp(jp->ps[0].cmd, name + 1, - namelen - 1) == 0) { - if (found) - error("%s: ambiguous", name); - found = jp; - } - } - if (found) - return found; - } - } else if (is_number(name)) { - pid = (pid_t)number(name); - for (jp = jobtab, i = njobs ; --i >= 0 ; jp++) { - if (jp->used && jp->nprocs > 0 - && jp->ps[jp->nprocs - 1].pid == pid) - return jp; - } - } - return NULL; -} - - -static struct job * -getjob(const char *name) -{ - struct job *jp; - - jp = getjob_nonotfound(name); - if (jp == NULL) - error("No such job: %s", name); - return (jp); -} - - -int -killjob(const char *name, int sig) -{ - struct job *jp; - int i, ret; - - jp = getjob(name); - if (jp->state == JOBDONE) - return 0; - if (jp->jobctl) - return kill(-jp->ps[0].pid, sig); - ret = -1; - errno = ESRCH; - for (i = 0; i < jp->nprocs; i++) - if (jp->ps[i].status == -1 || WIFSTOPPED(jp->ps[i].status)) { - if (kill(jp->ps[i].pid, sig) == 0) - ret = 0; - } else - ret = 0; - return ret; -} - -/* - * Return a new job structure, - */ - -struct job * -makejob(union node *node __unused, int nprocs) -{ - int i; - struct job *jp; - - for (i = njobs, jp = jobtab ; ; jp++) { - if (--i < 0) { - INTOFF; - if (njobs == 0) { - jobtab = ckmalloc(4 * sizeof jobtab[0]); -#if JOBS - jobmru = NULL; -#endif - } else { - jp = ckmalloc((njobs + 4) * sizeof jobtab[0]); - memcpy(jp, jobtab, njobs * sizeof jp[0]); -#if JOBS - /* Relocate `next' pointers and list head */ - if (jobmru != NULL) - jobmru = &jp[jobmru - jobtab]; - for (i = 0; i < njobs; i++) - if (jp[i].next != NULL) - jp[i].next = &jp[jp[i].next - - jobtab]; -#endif - if (bgjob != NULL) - bgjob = &jp[bgjob - jobtab]; - /* Relocate `ps' pointers */ - for (i = 0; i < njobs; i++) - if (jp[i].ps == &jobtab[i].ps0) - jp[i].ps = &jp[i].ps0; - ckfree(jobtab); - jobtab = jp; - } - jp = jobtab + njobs; - for (i = 4 ; --i >= 0 ; jobtab[njobs++].used = 0) - ; - INTON; - break; - } - if (jp->used == 0) - break; - } - INTOFF; - jp->state = 0; - jp->used = 1; - jp->changed = 0; - jp->nprocs = 0; - jp->foreground = 0; - jp->remembered = 0; -#if JOBS - jp->jobctl = jobctl; - jp->next = NULL; -#endif - if (nprocs > 1) { - jp->ps = ckmalloc(nprocs * sizeof (struct procstat)); - } else { - jp->ps = &jp->ps0; - } - INTON; - TRACE(("makejob(%p, %d) returns %%%td\n", (void *)node, nprocs, - jp - jobtab + 1)); - return jp; -} - -#if JOBS -static void -setcurjob(struct job *cj) -{ - struct job *jp, *prev; - - for (prev = NULL, jp = jobmru; jp != NULL; prev = jp, jp = jp->next) { - if (jp == cj) { - if (prev != NULL) - prev->next = jp->next; - else - jobmru = jp->next; - jp->next = jobmru; - jobmru = cj; - return; - } - } - cj->next = jobmru; - jobmru = cj; -} - -static void -deljob(struct job *j) -{ - struct job *jp, *prev; - - for (prev = NULL, jp = jobmru; jp != NULL; prev = jp, jp = jp->next) { - if (jp == j) { - if (prev != NULL) - prev->next = jp->next; - else - jobmru = jp->next; - return; - } - } -} - -/* - * Return the most recently used job that isn't `nj', and preferably one - * that is stopped. - */ -static struct job * -getcurjob(struct job *nj) -{ - struct job *jp; - - /* Try to find a stopped one.. */ - for (jp = jobmru; jp != NULL; jp = jp->next) - if (jp->used && jp != nj && jp->state == JOBSTOPPED) - return (jp); - /* Otherwise the most recently used job that isn't `nj' */ - for (jp = jobmru; jp != NULL; jp = jp->next) - if (jp->used && jp != nj) - return (jp); - - return (NULL); -} - -#endif - -/* - * Fork of a subshell. If we are doing job control, give the subshell its - * own process group. Jp is a job structure that the job is to be added to. - * N is the command that will be evaluated by the child. Both jp and n may - * be NULL. The mode parameter can be one of the following: - * FORK_FG - Fork off a foreground process. - * FORK_BG - Fork off a background process. - * FORK_NOJOB - Like FORK_FG, but don't give the process its own - * process group even if job control is on. - * - * When job control is turned off, background processes have their standard - * input redirected to /dev/null (except for the second and later processes - * in a pipeline). - */ - -pid_t -forkshell(struct job *jp, union node *n, int mode) -{ - pid_t pid; - pid_t pgrp; - - TRACE(("forkshell(%%%td, %p, %d) called\n", jp - jobtab, (void *)n, - mode)); - INTOFF; - if (mode == FORK_BG && (jp == NULL || jp->nprocs == 0)) - checkzombies(); - flushall(); - pid = fork(); - if (pid == -1) { - TRACE(("Fork failed, errno=%d\n", errno)); - INTON; - error("Cannot fork: %s", strerror(errno)); - } - if (pid == 0) { - struct job *p; - int wasroot; - int i; - - TRACE(("Child shell %d\n", (int)getpid())); - wasroot = rootshell; - rootshell = 0; - handler = &main_handler; - closescript(); - INTON; - forcelocal = 0; - clear_traps(); -#if JOBS - jobctl = 0; /* do job control only in root shell */ - if (wasroot && mode != FORK_NOJOB && mflag) { - if (jp == NULL || jp->nprocs == 0) - pgrp = getpid(); - else - pgrp = jp->ps[0].pid; - if (setpgid(0, pgrp) == 0 && mode == FORK_FG && - ttyfd >= 0) { - /*** this causes superfluous TIOCSPGRPS ***/ - if (tcsetpgrp(ttyfd, pgrp) < 0) - error("tcsetpgrp failed, errno=%d", errno); - } - setsignal(SIGTSTP); - setsignal(SIGTTOU); - } else if (mode == FORK_BG) { - ignoresig(SIGINT); - ignoresig(SIGQUIT); - if ((jp == NULL || jp->nprocs == 0) && - ! fd0_redirected_p ()) { - close(0); - if (open(_PATH_DEVNULL, O_RDONLY) != 0) - error("cannot open %s: %s", - _PATH_DEVNULL, strerror(errno)); - } - } -#else - if (mode == FORK_BG) { - ignoresig(SIGINT); - ignoresig(SIGQUIT); - if ((jp == NULL || jp->nprocs == 0) && - ! fd0_redirected_p ()) { - close(0); - if (open(_PATH_DEVNULL, O_RDONLY) != 0) - error("cannot open %s: %s", - _PATH_DEVNULL, strerror(errno)); - } - } -#endif - INTOFF; - for (i = njobs, p = jobtab ; --i >= 0 ; p++) - if (p->used) - freejob(p); - INTON; - if (wasroot && iflag) { - setsignal(SIGINT); - setsignal(SIGQUIT); - setsignal(SIGTERM); - } - return pid; - } - if (rootshell && mode != FORK_NOJOB && mflag) { - if (jp == NULL || jp->nprocs == 0) - pgrp = pid; - else - pgrp = jp->ps[0].pid; - setpgid(pid, pgrp); - } - if (mode == FORK_BG) { - if (bgjob != NULL && bgjob->state == JOBDONE && - !bgjob->remembered && !iflag) - freejob(bgjob); - backgndpid = pid; /* set $! */ - bgjob = jp; - } - if (jp) { - struct procstat *ps = &jp->ps[jp->nprocs++]; - ps->pid = pid; - ps->status = -1; - ps->cmd = nullstr; - if (iflag && rootshell && n) - ps->cmd = commandtext(n); - jp->foreground = mode == FORK_FG; -#if JOBS - setcurjob(jp); -#endif - } - INTON; - TRACE(("In parent shell: child = %d\n", (int)pid)); - return pid; -} - - -pid_t -vforkexecshell(struct job *jp, char **argv, char **envp, const char *path, int idx, int pip[2]) -{ - pid_t pid; - struct jmploc jmploc; - struct jmploc *savehandler; - - TRACE(("vforkexecshell(%%%td, %s, %p) called\n", jp - jobtab, argv[0], - (void *)pip)); - INTOFF; - flushall(); - savehandler = handler; - pid = vfork(); - if (pid == -1) { - TRACE(("Vfork failed, errno=%d\n", errno)); - INTON; - error("Cannot fork: %s", strerror(errno)); - } - if (pid == 0) { - TRACE(("Child shell %d\n", (int)getpid())); - if (setjmp(jmploc.loc)) - _exit(exception == EXEXEC ? exerrno : 2); - if (pip != NULL) { - close(pip[0]); - if (pip[1] != 1) { - dup2(pip[1], 1); - close(pip[1]); - } - } - handler = &jmploc; - shellexec(argv, envp, path, idx); - } - handler = savehandler; - if (jp) { - struct procstat *ps = &jp->ps[jp->nprocs++]; - ps->pid = pid; - ps->status = -1; - ps->cmd = nullstr; - jp->foreground = 1; -#if JOBS - setcurjob(jp); -#endif - } - INTON; - TRACE(("In parent shell: child = %d\n", (int)pid)); - return pid; -} - - -/* - * Wait for job to finish. - * - * Under job control we have the problem that while a child process is - * running interrupts generated by the user are sent to the child but not - * to the shell. This means that an infinite loop started by an inter- - * active user may be hard to kill. With job control turned off, an - * interactive user may place an interactive program inside a loop. If - * the interactive program catches interrupts, the user doesn't want - * these interrupts to also abort the loop. The approach we take here - * is to have the shell ignore interrupt signals while waiting for a - * foreground process to terminate, and then send itself an interrupt - * signal if the child process was terminated by an interrupt signal. - * Unfortunately, some programs want to do a bit of cleanup and then - * exit on interrupt; unless these processes terminate themselves by - * sending a signal to themselves (instead of calling exit) they will - * confuse this approach. - */ - -int -waitforjob(struct job *jp, int *signaled) -{ -#if JOBS - int propagate_int = jp->jobctl && jp->foreground; -#endif - int status; - int st; - - INTOFF; - TRACE(("waitforjob(%%%td) called\n", jp - jobtab + 1)); - while (jp->state == 0) - if (dowait(DOWAIT_BLOCK | (Tflag ? DOWAIT_SIG | - DOWAIT_SIG_TRAP : 0), jp) == -1) - dotrap(); -#if JOBS - if (jp->jobctl) { - if (ttyfd >= 0 && tcsetpgrp(ttyfd, rootpid) < 0) - error("tcsetpgrp failed, errno=%d\n", errno); - } - if (jp->state == JOBSTOPPED) - setcurjob(jp); -#endif - status = jp->ps[jp->nprocs - 1].status; - if (signaled != NULL) - *signaled = WIFSIGNALED(status); - /* convert to 8 bits */ - if (WIFEXITED(status)) - st = WEXITSTATUS(status); -#if JOBS - else if (WIFSTOPPED(status)) - st = WSTOPSIG(status) + 128; -#endif - else - st = WTERMSIG(status) + 128; - if (! JOBS || jp->state == JOBDONE) - freejob(jp); - if (int_pending()) { - if (!WIFSIGNALED(status) || WTERMSIG(status) != SIGINT) - CLEAR_PENDING_INT; - } -#if JOBS - else if (rootshell && propagate_int && - WIFSIGNALED(status) && WTERMSIG(status) == SIGINT) - kill(getpid(), SIGINT); -#endif - INTON; - return st; -} - - -static void -dummy_handler(int sig __unused) -{ -} - -/* - * Wait for a process to terminate. - */ - -static pid_t -dowait(int mode, struct job *job) -{ - struct sigaction sa, osa; - sigset_t mask, omask; - pid_t pid; - int status; - struct procstat *sp; - struct job *jp; - struct job *thisjob; - const char *sigstr; - int done; - int stopped; - int sig; - int coredump; - int wflags; - int restore_sigchld; - - TRACE(("dowait(%d, %p) called\n", mode, job)); - restore_sigchld = 0; - if ((mode & DOWAIT_SIG) != 0) { - sigfillset(&mask); - sigprocmask(SIG_BLOCK, &mask, &omask); - INTOFF; - if (!issigchldtrapped()) { - restore_sigchld = 1; - sa.sa_handler = dummy_handler; - sa.sa_flags = 0; - sigemptyset(&sa.sa_mask); - sigaction(SIGCHLD, &sa, &osa); - } - } - do { -#if JOBS - if (iflag) - wflags = WUNTRACED | WCONTINUED; - else -#endif - wflags = 0; - if ((mode & (DOWAIT_BLOCK | DOWAIT_SIG)) != DOWAIT_BLOCK) - wflags |= WNOHANG; - pid = wait3(&status, wflags, (struct rusage *)NULL); - TRACE(("wait returns %d, status=%d\n", (int)pid, status)); - if (pid == 0 && (mode & DOWAIT_SIG) != 0) { - pid = -1; - if (((mode & DOWAIT_SIG_TRAP) != 0 ? - pendingsig : pendingsig_waitcmd) != 0) { - errno = EINTR; - break; - } - sigsuspend(&omask); - if (int_pending()) - break; - } - } while (pid == -1 && errno == EINTR); - if (pid == -1 && errno == ECHILD && job != NULL) - job->state = JOBDONE; - if ((mode & DOWAIT_SIG) != 0) { - if (restore_sigchld) - sigaction(SIGCHLD, &osa, NULL); - sigprocmask(SIG_SETMASK, &omask, NULL); - INTON; - } - if (pid <= 0) - return pid; - INTOFF; - thisjob = NULL; - for (jp = jobtab ; jp < jobtab + njobs ; jp++) { - if (jp->used && jp->nprocs > 0) { - done = 1; - stopped = 1; - for (sp = jp->ps ; sp < jp->ps + jp->nprocs ; sp++) { - if (sp->pid == -1) - continue; - if (sp->pid == pid && (sp->status == -1 || - WIFSTOPPED(sp->status))) { - TRACE(("Changing status of proc %d from 0x%x to 0x%x\n", - (int)pid, sp->status, - status)); - if (WIFCONTINUED(status)) { - sp->status = -1; - jp->state = 0; - } else - sp->status = status; - thisjob = jp; - } - if (sp->status == -1) - stopped = 0; - else if (WIFSTOPPED(sp->status)) - done = 0; - } - if (stopped) { /* stopped or done */ - int state = done? JOBDONE : JOBSTOPPED; - if (jp->state != state) { - TRACE(("Job %td: changing state from %d to %d\n", jp - jobtab + 1, jp->state, state)); - jp->state = state; - if (jp != job) { - if (done && !jp->remembered && - !iflag && jp != bgjob) - freejob(jp); -#if JOBS - else if (done) - deljob(jp); -#endif - } - } - } - } - } - INTON; - if (!thisjob || thisjob->state == 0) - ; - else if ((!rootshell || !iflag || thisjob == job) && - thisjob->foreground && thisjob->state != JOBSTOPPED) { - sig = 0; - coredump = 0; - for (sp = thisjob->ps; sp < thisjob->ps + thisjob->nprocs; sp++) - if (WIFSIGNALED(sp->status)) { - sig = WTERMSIG(sp->status); - coredump = WCOREDUMP(sp->status); - } - if (sig > 0 && sig != SIGINT && sig != SIGPIPE) { - sigstr = strsignal(sig); - if (sigstr != NULL) - out2str(sigstr); - else - out2str("Unknown signal"); - if (coredump) - out2str(" (core dumped)"); - out2c('\n'); - flushout(out2); - } - } else { - TRACE(("Not printing status, rootshell=%d, job=%p\n", rootshell, job)); - thisjob->changed = 1; - } - return pid; -} - - - -/* - * return 1 if there are stopped jobs, otherwise 0 - */ -int job_warning = 0; -int -stoppedjobs(void) -{ - int jobno; - struct job *jp; - - if (job_warning) - return (0); - for (jobno = 1, jp = jobtab; jobno <= njobs; jobno++, jp++) { - if (jp->used == 0) - continue; - if (jp->state == JOBSTOPPED) { - out2fmt_flush("You have stopped jobs.\n"); - job_warning = 2; - return (1); - } - } - - return (0); -} - - -static void -checkzombies(void) -{ - while (njobs > 0 && dowait(0, NULL) > 0) - ; -} - - -int -backgndpidset(void) -{ - return backgndpid != -1; -} - - -pid_t -backgndpidval(void) -{ - if (bgjob != NULL && !forcelocal) - bgjob->remembered = 1; - return backgndpid; -} - -/* - * Return a string identifying a command (to be printed by the - * jobs command. - */ - -static char *cmdnextc; -static int cmdnleft; -#define MAXCMDTEXT 200 - -char * -commandtext(union node *n) -{ - char *name; - - cmdnextc = name = ckmalloc(MAXCMDTEXT); - cmdnleft = MAXCMDTEXT - 4; - cmdtxt(n); - *cmdnextc = '\0'; - return name; -} - - -static void -cmdtxtdogroup(union node *n) -{ - cmdputs("; do "); - cmdtxt(n); - cmdputs("; done"); -} - - -static void -cmdtxtredir(union node *n, const char *op, int deffd) -{ - char s[2]; - - if (n->nfile.fd != deffd) { - s[0] = n->nfile.fd + '0'; - s[1] = '\0'; - cmdputs(s); - } - cmdputs(op); - if (n->type == NTOFD || n->type == NFROMFD) { - if (n->ndup.dupfd >= 0) - s[0] = n->ndup.dupfd + '0'; - else - s[0] = '-'; - s[1] = '\0'; - cmdputs(s); - } else { - cmdtxt(n->nfile.fname); - } -} - - -static void -cmdtxt(union node *n) -{ - union node *np; - struct nodelist *lp; - - if (n == NULL) - return; - switch (n->type) { - case NSEMI: - cmdtxt(n->nbinary.ch1); - cmdputs("; "); - cmdtxt(n->nbinary.ch2); - break; - case NAND: - cmdtxt(n->nbinary.ch1); - cmdputs(" && "); - cmdtxt(n->nbinary.ch2); - break; - case NOR: - cmdtxt(n->nbinary.ch1); - cmdputs(" || "); - cmdtxt(n->nbinary.ch2); - break; - case NPIPE: - for (lp = n->npipe.cmdlist ; lp ; lp = lp->next) { - cmdtxt(lp->n); - if (lp->next) - cmdputs(" | "); - } - break; - case NSUBSHELL: - cmdputs("("); - cmdtxt(n->nredir.n); - cmdputs(")"); - break; - case NREDIR: - case NBACKGND: - cmdtxt(n->nredir.n); - break; - case NIF: - cmdputs("if "); - cmdtxt(n->nif.test); - cmdputs("; then "); - cmdtxt(n->nif.ifpart); - cmdputs("..."); - break; - case NWHILE: - cmdputs("while "); - cmdtxt(n->nbinary.ch1); - cmdtxtdogroup(n->nbinary.ch2); - break; - case NUNTIL: - cmdputs("until "); - cmdtxt(n->nbinary.ch1); - cmdtxtdogroup(n->nbinary.ch2); - break; - case NFOR: - cmdputs("for "); - cmdputs(n->nfor.var); - cmdputs(" in ..."); - break; - case NCASE: - cmdputs("case "); - cmdputs(n->ncase.expr->narg.text); - cmdputs(" in ..."); - break; - case NDEFUN: - cmdputs(n->narg.text); - cmdputs("() ..."); - break; - case NNOT: - cmdputs("! "); - cmdtxt(n->nnot.com); - break; - case NCMD: - for (np = n->ncmd.args ; np ; np = np->narg.next) { - cmdtxt(np); - if (np->narg.next) - cmdputs(" "); - } - for (np = n->ncmd.redirect ; np ; np = np->nfile.next) { - cmdputs(" "); - cmdtxt(np); - } - break; - case NARG: - cmdputs(n->narg.text); - break; - case NTO: - cmdtxtredir(n, ">", 1); - break; - case NAPPEND: - cmdtxtredir(n, ">>", 1); - break; - case NTOFD: - cmdtxtredir(n, ">&", 1); - break; - case NCLOBBER: - cmdtxtredir(n, ">|", 1); - break; - case NFROM: - cmdtxtredir(n, "<", 0); - break; - case NFROMTO: - cmdtxtredir(n, "<>", 0); - break; - case NFROMFD: - cmdtxtredir(n, "<&", 0); - break; - case NHERE: - case NXHERE: - cmdputs("<<..."); - break; - default: - cmdputs("???"); - break; - } -} - - - -static void -cmdputs(const char *s) -{ - const char *p; - char *q; - char c; - int subtype = 0; - - if (cmdnleft <= 0) - return; - p = s; - q = cmdnextc; - while ((c = *p++) != '\0') { - if (c == CTLESC) - *q++ = *p++; - else if (c == CTLVAR) { - *q++ = '$'; - if (--cmdnleft > 0) - *q++ = '{'; - subtype = *p++; - if ((subtype & VSTYPE) == VSLENGTH && --cmdnleft > 0) - *q++ = '#'; - } else if (c == '=' && subtype != 0) { - *q = "}-+?=##%%\0X"[(subtype & VSTYPE) - VSNORMAL]; - if (*q) - q++; - else - cmdnleft++; - if (((subtype & VSTYPE) == VSTRIMLEFTMAX || - (subtype & VSTYPE) == VSTRIMRIGHTMAX) && - --cmdnleft > 0) - *q = q[-1], q++; - subtype = 0; - } else if (c == CTLENDVAR) { - *q++ = '}'; - } else if (c == CTLBACKQ || c == CTLBACKQ+CTLQUOTE) { - cmdnleft -= 5; - if (cmdnleft > 0) { - *q++ = '$'; - *q++ = '('; - *q++ = '.'; - *q++ = '.'; - *q++ = '.'; - *q++ = ')'; - } - } else if (c == CTLARI) { - cmdnleft -= 2; - if (cmdnleft > 0) { - *q++ = '$'; - *q++ = '('; - *q++ = '('; - } - p++; - } else if (c == CTLENDARI) { - if (--cmdnleft > 0) { - *q++ = ')'; - *q++ = ')'; - } - } else if (c == CTLQUOTEMARK || c == CTLQUOTEEND) - cmdnleft++; /* ignore */ - else - *q++ = c; - if (--cmdnleft <= 0) { - *q++ = '.'; - *q++ = '.'; - *q++ = '.'; - break; - } - } - cmdnextc = q; -} diff --git a/bin/1sh/jobs.h b/bin/1sh/jobs.h deleted file mode 100644 index 52c3abe1..00000000 --- a/bin/1sh/jobs.h +++ /dev/null @@ -1,67 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)jobs.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/jobs.h 327475 2018-01-01 22:31:52Z jilles $ - */ - -/* Mode argument to forkshell. Don't change FORK_FG or FORK_BG. */ -#define FORK_FG 0 -#define FORK_BG 1 -#define FORK_NOJOB 2 - -#include <signal.h> /* for sig_atomic_t */ - -struct job; - -enum { - SHOWJOBS_DEFAULT, /* job number, status, command */ - SHOWJOBS_VERBOSE, /* job number, PID, status, command */ - SHOWJOBS_PIDS, /* PID only */ - SHOWJOBS_PGIDS /* PID of the group leader only */ -}; - -extern int job_warning; /* user was warned about stopped jobs */ - -void setjobctl(int); -void showjobs(int, int); -struct job *makejob(union node *, int); -pid_t forkshell(struct job *, union node *, int); -pid_t vforkexecshell(struct job *, char **, char **, const char *, int, int []); -int waitforjob(struct job *, int *); -int stoppedjobs(void); -int backgndpidset(void); -pid_t backgndpidval(void); -char *commandtext(union node *); - -#if ! JOBS -#define setjobctl(on) /* do nothing */ -#endif diff --git a/bin/1sh/kill.c b/bin/1sh/kill.c deleted file mode 100644 index f58987cc..00000000 --- a/bin/1sh/kill.c +++ /dev/null @@ -1,215 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1988, 1993, 1994 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Important: This file is used both as a standalone program /bin/kill and - * as a builtin for /bin/sh (#define SHELL). - */ - -#if 0 -#ifndef lint -static char const copyright[] = -"@(#) Copyright (c) 1988, 1993, 1994\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif /* not lint */ - -#ifndef lint -static char sccsid[] = "@(#)kill.c 8.4 (Berkeley) 4/28/95"; -#endif /* not lint */ -#endif -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/kill/kill.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <ctype.h> -#include <err.h> -#include <errno.h> -#include <signal.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#ifdef SHELL -#define main killcmd -#include "bltin.h" -#endif - -static void nosig(const char *); -static void printsignals(FILE *); -static int signame_to_signum(const char *); -static void usage(void); - -int -main(int argc, char *argv[]) -{ - long pidl; - pid_t pid; - int errors, numsig, ret; - char *ep; - - if (argc < 2) - usage(); - - numsig = SIGTERM; - - argc--, argv++; - if (!strcmp(*argv, "-l")) { - argc--, argv++; - if (argc > 1) - usage(); - if (argc == 1) { - if (!isdigit(**argv)) - usage(); - numsig = strtol(*argv, &ep, 10); - if (!**argv || *ep) - errx(2, "illegal signal number: %s", *argv); - if (numsig >= 128) - numsig -= 128; - if (numsig <= 0 || numsig >= NSIG) - nosig(*argv); - printf("%s\n", sys_signame[numsig]); - return (0); - } - printsignals(stdout); - return (0); - } - - if (!strcmp(*argv, "-s")) { - argc--, argv++; - if (argc < 1) { - warnx("option requires an argument -- s"); - usage(); - } - if (strcmp(*argv, "0")) { - if ((numsig = signame_to_signum(*argv)) < 0) - nosig(*argv); - } else - numsig = 0; - argc--, argv++; - } else if (**argv == '-' && *(*argv + 1) != '-') { - ++*argv; - if (isalpha(**argv)) { - if ((numsig = signame_to_signum(*argv)) < 0) - nosig(*argv); - } else if (isdigit(**argv)) { - numsig = strtol(*argv, &ep, 10); - if (!**argv || *ep) - errx(2, "illegal signal number: %s", *argv); - if (numsig < 0) - nosig(*argv); - } else - nosig(*argv); - argc--, argv++; - } - - if (argc > 0 && strncmp(*argv, "--", 2) == 0) - argc--, argv++; - - if (argc == 0) - usage(); - - for (errors = 0; argc; argc--, argv++) { -#ifdef SHELL - if (**argv == '%') - ret = killjob(*argv, numsig); - else -#endif - { - pidl = strtol(*argv, &ep, 10); - /* Check for overflow of pid_t. */ - pid = (pid_t)pidl; - if (!**argv || *ep || pid != pidl) - errx(2, "illegal process id: %s", *argv); - ret = kill(pid, numsig); - } - if (ret == -1) { - warn("%s", *argv); - errors = 1; - } - } - - return (errors); -} - -static int -signame_to_signum(const char *sig) -{ - int n; - - if (strncasecmp(sig, "SIG", 3) == 0) - sig += 3; - for (n = 1; n < NSIG; n++) { - if (!strcasecmp(sys_signame[n], sig)) - return (n); - } - return (-1); -} - -static void -nosig(const char *name) -{ - - warnx("unknown signal %s; valid signals:", name); - printsignals(stderr); -#ifdef SHELL - error(NULL); -#else - exit(2); -#endif -} - -static void -printsignals(FILE *fp) -{ - int n; - - for (n = 1; n < NSIG; n++) { - (void)fprintf(fp, "%s", sys_signame[n]); - if (n == (NSIG / 2) || n == (NSIG - 1)) - (void)fprintf(fp, "\n"); - else - (void)fprintf(fp, " "); - } -} - -static void -usage(void) -{ - - (void)fprintf(stderr, "%s\n%s\n%s\n%s\n", - "usage: kill [-s signal_name] pid ...", - " kill -l [exit_status]", - " kill -signal_name pid ...", - " kill -signal_number pid ..."); -#ifdef SHELL - error(NULL); -#else - exit(2); -#endif -} diff --git a/bin/1sh/mail.c b/bin/1sh/mail.c deleted file mode 100644 index 6f8a3d39..00000000 --- a/bin/1sh/mail.c +++ /dev/null @@ -1,120 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)mail.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/mail.c 336303 2018-07-15 09:14:30Z jilles $"); - -/* - * Routines to check for mail. (Perhaps make part of main.c?) - */ - -#include "shell.h" -#include "mail.h" -#include "var.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include <sys/types.h> -#include <sys/stat.h> -#include <stdlib.h> - - -#define MAXMBOXES 10 - - -static int nmboxes; /* number of mailboxes */ -static time_t mailtime[MAXMBOXES]; /* times of mailboxes */ - - - -/* - * Print appropriate message(s) if mail has arrived. If the argument is - * nozero, then the value of MAIL has changed, so we just update the - * values. - */ - -void -chkmail(int silent) -{ - int i; - char *mpath; - char *p; - char *msg; - struct stackmark smark; - struct stat statb; - - if (silent) - nmboxes = 10; - if (nmboxes == 0) - return; - setstackmark(&smark); - mpath = stsavestr(mpathset()? mpathval() : mailval()); - for (i = 0 ; i < nmboxes ; i++) { - p = mpath; - if (*p == '\0') - break; - mpath = strchr(p, ':'); - if (!mpath) mpath = strchr(p, '\0'); - if (*mpath != '\0') { - *mpath++ = '\0'; - if (p == mpath - 1) - continue; - } - msg = strchr(p, '%'); - if (msg != NULL) - *msg++ = '\0'; -#ifdef notdef /* this is what the System V shell claims to do (it lies) */ - if (stat(p, &statb) < 0) - statb.st_mtime = 0; - if (statb.st_mtime > mailtime[i] && ! silent) { - out2str(msg? msg : "you have mail"); - out2c('\n'); - } - mailtime[i] = statb.st_mtime; -#else /* this is what it should do */ - if (stat(p, &statb) < 0) - statb.st_size = 0; - if (statb.st_size > mailtime[i] && ! silent) { - out2str(msg? msg : "you have mail"); - out2c('\n'); - } - mailtime[i] = statb.st_size; -#endif - } - nmboxes = i; - popstackmark(&smark); -} diff --git a/bin/1sh/mail.h b/bin/1sh/mail.h deleted file mode 100644 index adeced2d..00000000 --- a/bin/1sh/mail.h +++ /dev/null @@ -1,38 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)mail.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/mail.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -void chkmail(int); diff --git a/bin/1sh/main.c b/bin/1sh/main.c deleted file mode 100644 index 7a0bf25b..00000000 --- a/bin/1sh/main.c +++ /dev/null @@ -1,350 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)main.c 8.6 (Berkeley) 5/28/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/main.c 336320 2018-07-15 21:55:17Z jilles $"); - -#include <stdio.h> -#include <signal.h> -#include <sys/stat.h> -#include <unistd.h> -#include <fcntl.h> -#include <locale.h> -#include <errno.h> - -#include "shell.h" -#include "main.h" -#include "mail.h" -#include "options.h" -#include "output.h" -#include "parser.h" -#include "nodes.h" -#include "expand.h" -#include "eval.h" -#include "jobs.h" -#include "input.h" -#include "trap.h" -#include "var.h" -#include "show.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "exec.h" -#include "cd.h" -#include "redir.h" -#include "builtins.h" - -int rootpid; -int rootshell; -struct jmploc main_handler; -int localeisutf8, initial_localeisutf8; - -static void reset(void); -static void cmdloop(int); -static void read_profile(const char *); -static char *find_dot_file(char *); - -/* - * Main routine. We initialize things, parse the arguments, execute - * profiles if we're a login shell, and then call cmdloop to execute - * commands. The setjmp call sets up the location to jump to when an - * exception occurs. When an exception occurs the variable "state" - * is used to figure out how far we had gotten. - */ - -int -main(int argc, char *argv[]) -{ - struct stackmark smark, smark2; - volatile int state; - char *shinit; - - (void) setlocale(LC_ALL, ""); - initcharset(); - state = 0; - if (setjmp(main_handler.loc)) { - switch (exception) { - case EXEXEC: - exitstatus = exerrno; - break; - - case EXERROR: - exitstatus = 2; - break; - - default: - break; - } - - if (state == 0 || iflag == 0 || ! rootshell || - exception == EXEXIT) - exitshell(exitstatus); - reset(); - if (exception == EXINT) - out2fmt_flush("\n"); - popstackmark(&smark); - FORCEINTON; /* enable interrupts */ - if (state == 1) - goto state1; - else if (state == 2) - goto state2; - else if (state == 3) - goto state3; - else - goto state4; - } - handler = &main_handler; -#ifdef DEBUG - opentrace(); - trputs("Shell args: "); trargs(argv); -#endif - rootpid = getpid(); - rootshell = 1; - INTOFF; - initvar(); - setstackmark(&smark); - setstackmark(&smark2); - procargs(argc, argv); - pwd_init(iflag); - INTON; - if (iflag) - chkmail(1); - if (argv[0] && argv[0][0] == '-') { - state = 1; - read_profile("/etc/profile"); -state1: - state = 2; - if (privileged == 0) - read_profile("${HOME-}/.profile"); - else - read_profile("/etc/suid_profile"); - } -state2: - state = 3; - if (!privileged && iflag) { - if ((shinit = lookupvar("ENV")) != NULL && *shinit != '\0') { - state = 3; - read_profile(shinit); - } - } -state3: - state = 4; - popstackmark(&smark2); - if (minusc) { - evalstring(minusc, sflag ? 0 : EV_EXIT); - } -state4: - if (sflag || minusc == NULL) { - cmdloop(1); - } - iflag = 0; - optschanged(); - exitshell(exitstatus); - /*NOTREACHED*/ - return 0; -} - -static void -reset(void) -{ - reseteval(); - resetinput(); -} - -/* - * Read and execute commands. "Top" is nonzero for the top level command - * loop; it turns on prompting if the shell is interactive. - */ - -static void -cmdloop(int top) -{ - union node *n; - struct stackmark smark; - int inter; - int numeof = 0; - - TRACE(("cmdloop(%d) called\n", top)); - setstackmark(&smark); - for (;;) { - if (pendingsig) - dotrap(); - inter = 0; - if (iflag && top) { - inter++; - showjobs(1, SHOWJOBS_DEFAULT); - chkmail(0); - flushout(&output); - } - n = parsecmd(inter); - /* showtree(n); DEBUG */ - if (n == NEOF) { - if (!top || numeof >= 50) - break; - if (!stoppedjobs()) { - if (!Iflag) - break; - out2fmt_flush("\nUse \"exit\" to leave shell.\n"); - } - numeof++; - } else if (n != NULL && nflag == 0) { - job_warning = (job_warning == 2) ? 1 : 0; - numeof = 0; - evaltree(n, 0); - } - popstackmark(&smark); - setstackmark(&smark); - if (evalskip != 0) { - if (evalskip == SKIPRETURN) - evalskip = 0; - break; - } - } - popstackmark(&smark); -} - - - -/* - * Read /etc/profile or .profile. Return on error. - */ - -static void -read_profile(const char *name) -{ - int fd; - const char *expandedname; - - expandedname = expandstr(name); - if (expandedname == NULL) - return; - INTOFF; - if ((fd = open(expandedname, O_RDONLY | O_CLOEXEC)) >= 0) - setinputfd(fd, 1); - INTON; - if (fd < 0) - return; - cmdloop(0); - popfile(); -} - - - -/* - * Read a file containing shell functions. - */ - -void -readcmdfile(const char *name) -{ - setinputfile(name, 1); - cmdloop(0); - popfile(); -} - - - -/* - * Take commands from a file. To be compatible we should do a path - * search for the file, which is necessary to find sub-commands. - */ - - -static char * -find_dot_file(char *basename) -{ - char *fullname; - const char *opt; - const char *path = pathval(); - struct stat statb; - - /* don't try this for absolute or relative paths */ - if( strchr(basename, '/')) - return basename; - - while ((fullname = padvance(&path, &opt, basename)) != NULL) { - if ((stat(fullname, &statb) == 0) && S_ISREG(statb.st_mode)) { - /* - * Don't bother freeing here, since it will - * be freed by the caller. - */ - return fullname; - } - stunalloc(fullname); - } - return basename; -} - -int -dotcmd(int argc, char **argv) -{ - char *filename, *fullname; - - if (argc < 2) - error("missing filename"); - - exitstatus = 0; - - /* - * Because we have historically not supported any options, - * only treat "--" specially. - */ - filename = argc > 2 && strcmp(argv[1], "--") == 0 ? argv[2] : argv[1]; - - fullname = find_dot_file(filename); - setinputfile(fullname, 1); - commandname = fullname; - cmdloop(0); - popfile(); - return exitstatus; -} - - -int -exitcmd(int argc, char **argv) -{ - if (stoppedjobs()) - return 0; - iflag = 0; - optschanged(); - if (argc > 1) - exitshell(number(argv[1])); - else - exitshell_savedstatus(); -} diff --git a/bin/1sh/main.h b/bin/1sh/main.h deleted file mode 100644 index f37fd99e..00000000 --- a/bin/1sh/main.h +++ /dev/null @@ -1,42 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)main.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/main.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -extern int rootpid; /* pid of main shell */ -extern int rootshell; /* true if we aren't a child of the main shell */ -extern struct jmploc main_handler; /* top level exception handler */ - -void readcmdfile(const char *); diff --git a/bin/1sh/memalloc.c b/bin/1sh/memalloc.c deleted file mode 100644 index e43ce4cd..00000000 --- a/bin/1sh/memalloc.c +++ /dev/null @@ -1,344 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)memalloc.c 8.3 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/memalloc.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <sys/param.h> -#include "shell.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "expand.h" -#include <stdlib.h> -#include <unistd.h> - -/* - * Like malloc, but returns an error when out of space. - */ - -pointer -ckmalloc(size_t nbytes) -{ - pointer p; - - INTOFF; - p = malloc(nbytes); - INTON; - if (p == NULL) - error("Out of space"); - return p; -} - - -/* - * Same for realloc. - */ - -pointer -ckrealloc(pointer p, int nbytes) -{ - INTOFF; - p = realloc(p, nbytes); - INTON; - if (p == NULL) - error("Out of space"); - return p; -} - -void -ckfree(pointer p) -{ - INTOFF; - free(p); - INTON; -} - - -/* - * Make a copy of a string in safe storage. - */ - -char * -savestr(const char *s) -{ - char *p; - size_t len; - - len = strlen(s); - p = ckmalloc(len + 1); - memcpy(p, s, len + 1); - return p; -} - - -/* - * Parse trees for commands are allocated in lifo order, so we use a stack - * to make this more efficient, and also to avoid all sorts of exception - * handling code to handle interrupts in the middle of a parse. - * - * The size 496 was chosen because with 16-byte alignment the total size - * for the allocated block is 512. - */ - -#define MINSIZE 496 /* minimum size of a block. */ - - -struct stack_block { - struct stack_block *prev; - /* Data follows */ -}; -#define SPACE(sp) ((char*)(sp) + ALIGN(sizeof(struct stack_block))) - -static struct stack_block *stackp; -char *stacknxt; -int stacknleft; -char *sstrend; - - -static void -stnewblock(int nbytes) -{ - struct stack_block *sp; - int allocsize; - - if (nbytes < MINSIZE) - nbytes = MINSIZE; - - allocsize = ALIGN(sizeof(struct stack_block)) + ALIGN(nbytes); - - INTOFF; - sp = ckmalloc(allocsize); - sp->prev = stackp; - stacknxt = SPACE(sp); - stacknleft = allocsize - (stacknxt - (char*)sp); - sstrend = stacknxt + stacknleft; - stackp = sp; - INTON; -} - - -pointer -stalloc(int nbytes) -{ - char *p; - - nbytes = ALIGN(nbytes); - if (nbytes > stacknleft) - stnewblock(nbytes); - p = stacknxt; - stacknxt += nbytes; - stacknleft -= nbytes; - return p; -} - - -void -stunalloc(pointer p) -{ - if (p == NULL) { /*DEBUG */ - write(STDERR_FILENO, "stunalloc\n", 10); - abort(); - } - stacknleft += stacknxt - (char *)p; - stacknxt = p; -} - - -char * -stsavestr(const char *s) -{ - char *p; - size_t len; - - len = strlen(s); - p = stalloc(len + 1); - memcpy(p, s, len + 1); - return p; -} - - -void -setstackmark(struct stackmark *mark) -{ - mark->stackp = stackp; - mark->stacknxt = stacknxt; - mark->stacknleft = stacknleft; - /* Ensure this block stays in place. */ - if (stackp != NULL && stacknxt == SPACE(stackp)) - stalloc(1); -} - - -void -popstackmark(struct stackmark *mark) -{ - struct stack_block *sp; - - INTOFF; - while (stackp != mark->stackp) { - sp = stackp; - stackp = sp->prev; - ckfree(sp); - } - stacknxt = mark->stacknxt; - stacknleft = mark->stacknleft; - sstrend = stacknxt + stacknleft; - INTON; -} - - -/* - * When the parser reads in a string, it wants to stick the string on the - * stack and only adjust the stack pointer when it knows how big the - * string is. Stackblock (defined in stack.h) returns a pointer to a block - * of space on top of the stack and stackblocklen returns the length of - * this block. Growstackblock will grow this space by at least one byte, - * possibly moving it (like realloc). Grabstackblock actually allocates the - * part of the block that has been used. - */ - -static void -growstackblock(int min) -{ - char *p; - int newlen; - char *oldspace; - int oldlen; - struct stack_block *sp; - struct stack_block *oldstackp; - - if (min < stacknleft) - min = stacknleft; - if ((unsigned int)min >= - INT_MAX / 2 - ALIGN(sizeof(struct stack_block))) - error("Out of space"); - min += stacknleft; - min += ALIGN(sizeof(struct stack_block)); - newlen = 512; - while (newlen < min) - newlen <<= 1; - oldspace = stacknxt; - oldlen = stacknleft; - - if (stackp != NULL && stacknxt == SPACE(stackp)) { - INTOFF; - oldstackp = stackp; - stackp = oldstackp->prev; - sp = ckrealloc((pointer)oldstackp, newlen); - sp->prev = stackp; - stackp = sp; - stacknxt = SPACE(sp); - stacknleft = newlen - (stacknxt - (char*)sp); - sstrend = stacknxt + stacknleft; - INTON; - } else { - newlen -= ALIGN(sizeof(struct stack_block)); - p = stalloc(newlen); - if (oldlen != 0) - memcpy(p, oldspace, oldlen); - stunalloc(p); - } -} - - - -/* - * The following routines are somewhat easier to use that the above. - * The user declares a variable of type STACKSTR, which may be declared - * to be a register. The macro STARTSTACKSTR initializes things. Then - * the user uses the macro STPUTC to add characters to the string. In - * effect, STPUTC(c, p) is the same as *p++ = c except that the stack is - * grown as necessary. When the user is done, she can just leave the - * string there and refer to it using stackblock(). Or she can allocate - * the space for it using grabstackstr(). If it is necessary to allow - * someone else to use the stack temporarily and then continue to grow - * the string, the user should use grabstack to allocate the space, and - * then call ungrabstr(p) to return to the previous mode of operation. - * - * USTPUTC is like STPUTC except that it doesn't check for overflow. - * CHECKSTACKSPACE can be called before USTPUTC to ensure that there - * is space for at least one character. - */ - -static char * -growstrstackblock(int n, int min) -{ - growstackblock(min); - return stackblock() + n; -} - -char * -growstackstr(void) -{ - int len; - - len = stackblocksize(); - return (growstrstackblock(len, 0)); -} - - -/* - * Called from CHECKSTRSPACE. - */ - -char * -makestrspace(int min, char *p) -{ - int len; - - len = p - stackblock(); - return (growstrstackblock(len, min)); -} - - -char * -stputbin(const char *data, size_t len, char *p) -{ - CHECKSTRSPACE(len, p); - memcpy(p, data, len); - return (p + len); -} - -char * -stputs(const char *data, char *p) -{ - return (stputbin(data, strlen(data), p)); -} diff --git a/bin/1sh/memalloc.h b/bin/1sh/memalloc.h deleted file mode 100644 index 216275d8..00000000 --- a/bin/1sh/memalloc.h +++ /dev/null @@ -1,88 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)memalloc.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/memalloc.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -#include <string.h> - -struct stackmark { - struct stack_block *stackp; - char *stacknxt; - int stacknleft; -}; - - -extern char *stacknxt; -extern int stacknleft; -extern char *sstrend; - -pointer ckmalloc(size_t); -pointer ckrealloc(pointer, int); -void ckfree(pointer); -char *savestr(const char *); -pointer stalloc(int); -void stunalloc(pointer); -char *stsavestr(const char *); -void setstackmark(struct stackmark *); -void popstackmark(struct stackmark *); -char *growstackstr(void); -char *makestrspace(int, char *); -char *stputbin(const char *data, size_t len, char *p); -char *stputs(const char *data, char *p); - - - -#define stackblock() stacknxt -#define stackblocksize() stacknleft -#define grabstackblock(n) stalloc(n) -#define STARTSTACKSTR(p) p = stackblock() -#define STPUTC(c, p) do { if (p == sstrend) p = growstackstr(); *p++ = (c); } while(0) -#define CHECKSTRSPACE(n, p) { if ((size_t)(sstrend - p) < n) p = makestrspace(n, p); } -#define USTPUTC(c, p) (*p++ = (c)) -/* - * STACKSTRNUL's use is where we want to be able to turn a stack - * (non-sentinel, character counting string) into a C string, - * and later pretend the NUL is not there. - * Note: Because of STACKSTRNUL's semantics, STACKSTRNUL cannot be used - * on a stack that will grabstackstr()ed. - */ -#define STACKSTRNUL(p) (p == sstrend ? (p = growstackstr(), *p = '\0') : (*p = '\0')) -#define STUNPUTC(p) (--p) -#define STTOPC(p) p[-1] -#define STADJUST(amount, p) (p += (amount)) -#define grabstackstr(p) stalloc((char *)p - stackblock()) -#define ungrabstackstr(s, p) stunalloc((s)) -#define STPUTBIN(s, len, p) p = stputbin((s), (len), p) -#define STPUTS(s, p) p = stputs((s), p) diff --git a/bin/1sh/miscbltin.c b/bin/1sh/miscbltin.c deleted file mode 100644 index 7f0c42e7..00000000 --- a/bin/1sh/miscbltin.c +++ /dev/null @@ -1,534 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)miscbltin.c 8.4 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/miscbltin.c 326025 2017-11-20 19:49:47Z pfg $"); - -/* - * Miscellaneous builtins. - */ - -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/time.h> -#include <sys/resource.h> -#include <unistd.h> -#include <errno.h> -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> - -#include "shell.h" -#include "options.h" -#include "var.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "syntax.h" -#include "trap.h" - -#undef eflag - -int readcmd(int, char **); -int umaskcmd(int, char **); -int ulimitcmd(int, char **); - -/* - * The read builtin. The -r option causes backslashes to be treated like - * ordinary characters. - * - * This uses unbuffered input, which may be avoidable in some cases. - * - * Note that if IFS=' :' then read x y should work so that: - * 'a b' x='a', y='b' - * ' a b ' x='a', y='b' - * ':b' x='', y='b' - * ':' x='', y='' - * '::' x='', y='' - * ': :' x='', y='' - * ':::' x='', y='::' - * ':b c:' x='', y='b c:' - */ - -int -readcmd(int argc __unused, char **argv __unused) -{ - char **ap; - int backslash; - char c; - int rflag; - char *prompt; - const char *ifs; - char *p; - int startword; - int status; - int i; - int is_ifs; - int saveall = 0; - ptrdiff_t lastnonifs, lastnonifsws; - struct timeval tv; - char *tvptr; - fd_set ifds; - ssize_t nread; - int sig; - - rflag = 0; - prompt = NULL; - tv.tv_sec = -1; - tv.tv_usec = 0; - while ((i = nextopt("erp:t:")) != '\0') { - switch(i) { - case 'p': - prompt = shoptarg; - break; - case 'e': - break; - case 'r': - rflag = 1; - break; - case 't': - tv.tv_sec = strtol(shoptarg, &tvptr, 0); - if (tvptr == shoptarg) - error("timeout value"); - switch(*tvptr) { - case 0: - case 's': - break; - case 'h': - tv.tv_sec *= 60; - /* FALLTHROUGH */ - case 'm': - tv.tv_sec *= 60; - break; - default: - error("timeout unit"); - } - break; - } - } - if (prompt && isatty(0)) { - out2str(prompt); - flushall(); - } - if (*(ap = argptr) == NULL) - error("arg count"); - if ((ifs = bltinlookup("IFS", 1)) == NULL) - ifs = " \t\n"; - - if (tv.tv_sec >= 0) { - /* - * Wait for something to become available. - */ - FD_ZERO(&ifds); - FD_SET(0, &ifds); - status = select(1, &ifds, NULL, NULL, &tv); - /* - * If there's nothing ready, return an error. - */ - if (status <= 0) { - sig = pendingsig; - return (128 + (sig != 0 ? sig : SIGALRM)); - } - } - - status = 0; - startword = 2; - backslash = 0; - STARTSTACKSTR(p); - lastnonifs = lastnonifsws = -1; - for (;;) { - nread = read(STDIN_FILENO, &c, 1); - if (nread == -1) { - if (errno == EINTR) { - sig = pendingsig; - if (sig == 0) - continue; - status = 128 + sig; - break; - } - warning("read error: %s", strerror(errno)); - status = 2; - break; - } else if (nread != 1) { - status = 1; - break; - } - if (c == '\0') - continue; - CHECKSTRSPACE(1, p); - if (backslash) { - backslash = 0; - if (c != '\n') { - startword = 0; - lastnonifs = lastnonifsws = p - stackblock(); - USTPUTC(c, p); - } - continue; - } - if (!rflag && c == '\\') { - backslash++; - continue; - } - if (c == '\n') - break; - if (strchr(ifs, c)) - is_ifs = strchr(" \t\n", c) ? 1 : 2; - else - is_ifs = 0; - - if (startword != 0) { - if (is_ifs == 1) { - /* Ignore leading IFS whitespace */ - if (saveall) - USTPUTC(c, p); - continue; - } - if (is_ifs == 2 && startword == 1) { - /* Only one non-whitespace IFS per word */ - startword = 2; - if (saveall) { - lastnonifsws = p - stackblock(); - USTPUTC(c, p); - } - continue; - } - } - - if (is_ifs == 0) { - /* append this character to the current variable */ - startword = 0; - if (saveall) - /* Not just a spare terminator */ - saveall++; - lastnonifs = lastnonifsws = p - stackblock(); - USTPUTC(c, p); - continue; - } - - /* end of variable... */ - startword = is_ifs; - - if (ap[1] == NULL) { - /* Last variable needs all IFS chars */ - saveall++; - if (is_ifs == 2) - lastnonifsws = p - stackblock(); - USTPUTC(c, p); - continue; - } - - STACKSTRNUL(p); - setvar(*ap, stackblock(), 0); - ap++; - STARTSTACKSTR(p); - lastnonifs = lastnonifsws = -1; - } - STACKSTRNUL(p); - - /* - * Remove trailing IFS chars: always remove whitespace, don't remove - * non-whitespace unless it was naked - */ - if (saveall <= 1) - lastnonifsws = lastnonifs; - stackblock()[lastnonifsws + 1] = '\0'; - setvar(*ap, stackblock(), 0); - - /* Set any remaining args to "" */ - while (*++ap != NULL) - setvar(*ap, "", 0); - return status; -} - - - -int -umaskcmd(int argc __unused, char **argv __unused) -{ - char *ap; - int mask; - int i; - int symbolic_mode = 0; - - while ((i = nextopt("S")) != '\0') { - symbolic_mode = 1; - } - - INTOFF; - mask = umask(0); - umask(mask); - INTON; - - if ((ap = *argptr) == NULL) { - if (symbolic_mode) { - char u[4], g[4], o[4]; - - i = 0; - if ((mask & S_IRUSR) == 0) - u[i++] = 'r'; - if ((mask & S_IWUSR) == 0) - u[i++] = 'w'; - if ((mask & S_IXUSR) == 0) - u[i++] = 'x'; - u[i] = '\0'; - - i = 0; - if ((mask & S_IRGRP) == 0) - g[i++] = 'r'; - if ((mask & S_IWGRP) == 0) - g[i++] = 'w'; - if ((mask & S_IXGRP) == 0) - g[i++] = 'x'; - g[i] = '\0'; - - i = 0; - if ((mask & S_IROTH) == 0) - o[i++] = 'r'; - if ((mask & S_IWOTH) == 0) - o[i++] = 'w'; - if ((mask & S_IXOTH) == 0) - o[i++] = 'x'; - o[i] = '\0'; - - out1fmt("u=%s,g=%s,o=%s\n", u, g, o); - } else { - out1fmt("%.4o\n", mask); - } - } else { - if (is_digit(*ap)) { - mask = 0; - do { - if (*ap >= '8' || *ap < '0') - error("Illegal number: %s", *argptr); - mask = (mask << 3) + (*ap - '0'); - } while (*++ap != '\0'); - umask(mask); - } else { - void *set; - INTOFF; - if ((set = setmode (ap)) == NULL) - error("Illegal number: %s", ap); - - mask = getmode (set, ~mask & 0777); - umask(~mask & 0777); - free(set); - INTON; - } - } - return 0; -} - -/* - * ulimit builtin - * - * This code, originally by Doug Gwyn, Doug Kingston, Eric Gisin, and - * Michael Rendell was ripped from pdksh 5.0.8 and hacked for use with - * ash by J.T. Conklin. - * - * Public domain. - */ - -struct limits { - const char *name; - const char *units; - int cmd; - short factor; /* multiply by to get rlim_{cur,max} values */ - char option; -}; - -static const struct limits limits[] = { -#ifdef RLIMIT_CPU - { "cpu time", "seconds", RLIMIT_CPU, 1, 't' }, -#endif -#ifdef RLIMIT_FSIZE - { "file size", "512-blocks", RLIMIT_FSIZE, 512, 'f' }, -#endif -#ifdef RLIMIT_DATA - { "data seg size", "kbytes", RLIMIT_DATA, 1024, 'd' }, -#endif -#ifdef RLIMIT_STACK - { "stack size", "kbytes", RLIMIT_STACK, 1024, 's' }, -#endif -#ifdef RLIMIT_CORE - { "core file size", "512-blocks", RLIMIT_CORE, 512, 'c' }, -#endif -#ifdef RLIMIT_RSS - { "max memory size", "kbytes", RLIMIT_RSS, 1024, 'm' }, -#endif -#ifdef RLIMIT_MEMLOCK - { "locked memory", "kbytes", RLIMIT_MEMLOCK, 1024, 'l' }, -#endif -#ifdef RLIMIT_NPROC - { "max user processes", (char *)0, RLIMIT_NPROC, 1, 'u' }, -#endif -#ifdef RLIMIT_NOFILE - { "open files", (char *)0, RLIMIT_NOFILE, 1, 'n' }, -#endif -#ifdef RLIMIT_VMEM - { "virtual mem size", "kbytes", RLIMIT_VMEM, 1024, 'v' }, -#endif -#ifdef RLIMIT_SWAP - { "swap limit", "kbytes", RLIMIT_SWAP, 1024, 'w' }, -#endif -#ifdef RLIMIT_SBSIZE - { "socket buffer size", "bytes", RLIMIT_SBSIZE, 1, 'b' }, -#endif -#ifdef RLIMIT_NPTS - { "pseudo-terminals", (char *)0, RLIMIT_NPTS, 1, 'p' }, -#endif -#ifdef RLIMIT_KQUEUES - { "kqueues", (char *)0, RLIMIT_KQUEUES, 1, 'k' }, -#endif -#ifdef RLIMIT_UMTXP - { "umtx shared locks", (char *)0, RLIMIT_UMTXP, 1, 'o' }, -#endif - { (char *) 0, (char *)0, 0, 0, '\0' } -}; - -enum limithow { SOFT = 0x1, HARD = 0x2 }; - -static void -printlimit(enum limithow how, const struct rlimit *limit, - const struct limits *l) -{ - rlim_t val = 0; - - if (how & SOFT) - val = limit->rlim_cur; - else if (how & HARD) - val = limit->rlim_max; - if (val == RLIM_INFINITY) - out1str("unlimited\n"); - else - { - val /= l->factor; - out1fmt("%jd\n", (intmax_t)val); - } -} - -int -ulimitcmd(int argc __unused, char **argv __unused) -{ - rlim_t val = 0; - enum limithow how = SOFT | HARD; - const struct limits *l; - int set, all = 0; - int optc, what; - struct rlimit limit; - - what = 'f'; - while ((optc = nextopt("HSatfdsmcnuvlbpwko")) != '\0') - switch (optc) { - case 'H': - how = HARD; - break; - case 'S': - how = SOFT; - break; - case 'a': - all = 1; - break; - default: - what = optc; - } - - for (l = limits; l->name && l->option != what; l++) - ; - if (!l->name) - error("internal error (%c)", what); - - set = *argptr ? 1 : 0; - if (set) { - char *p = *argptr; - - if (all || argptr[1]) - error("too many arguments"); - if (strcmp(p, "unlimited") == 0) - val = RLIM_INFINITY; - else { - char *end; - uintmax_t uval; - - if (*p < '0' || *p > '9') - error("bad number"); - errno = 0; - uval = strtoumax(p, &end, 10); - if (errno != 0 || *end != '\0') - error("bad number"); - if (uval > UINTMAX_MAX / l->factor) - error("bad number"); - uval *= l->factor; - val = (rlim_t)uval; - if (val < 0 || (uintmax_t)val != uval || - val == RLIM_INFINITY) - error("bad number"); - } - } - if (all) { - for (l = limits; l->name; l++) { - char optbuf[40]; - if (getrlimit(l->cmd, &limit) < 0) - error("can't get limit: %s", strerror(errno)); - - if (l->units) - snprintf(optbuf, sizeof(optbuf), - "(%s, -%c) ", l->units, l->option); - else - snprintf(optbuf, sizeof(optbuf), - "(-%c) ", l->option); - out1fmt("%-18s %18s ", l->name, optbuf); - printlimit(how, &limit, l); - } - return 0; - } - - if (getrlimit(l->cmd, &limit) < 0) - error("can't get limit: %s", strerror(errno)); - if (set) { - if (how & SOFT) - limit.rlim_cur = val; - if (how & HARD) - limit.rlim_max = val; - if (setrlimit(l->cmd, &limit) < 0) - error("bad limit: %s", strerror(errno)); - } else - printlimit(how, &limit, l); - return 0; -} diff --git a/bin/1sh/mkbuiltins b/bin/1sh/mkbuiltins deleted file mode 100755 index 32c09ec0..00000000 --- a/bin/1sh/mkbuiltins +++ /dev/null @@ -1,137 +0,0 @@ -#!/bin/sh - - -#- -# Copyright (c) 1991, 1993 -# The Regents of the University of California. All rights reserved. -# -# This code is derived from software contributed to Berkeley by -# Kenneth Almquist. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)mkbuiltins 8.2 (Berkeley) 5/4/95 -# $FreeBSD: releng/12.0/bin/sh/mkbuiltins 328934 2018-02-06 15:41:35Z arichardson $ - -temp=`mktemp -t ka` -havehist=1 -if [ "X$1" = "X-h" ]; then - havehist=0 - shift -fi -srcdir=$1 -havejobs=0 -if grep '^#define[ ]*JOBS[ ]*1' $srcdir/shell.h > /dev/null -then havejobs=1 -fi -exec > builtins.c -cat <<\! -/* - * This file was generated by the mkbuiltins program. - */ - -#include <stdlib.h> -#include "shell.h" -#include "builtins.h" - -! -awk '/^[^#]/ {if(('$havejobs' || $2 != "-j") && ('$havehist' || $2 != "-h")) \ - print $0}' $srcdir/builtins.def | sed 's/-[hj]//' > $temp -echo 'int (*const builtinfunc[])(int, char **) = {' -awk '/^[^#]/ { printf "\t%s,\n", $1}' $temp -echo '}; - -const unsigned char builtincmd[] = {' -awk '{ for (i = 2 ; i <= NF ; i++) { - if ($i == "-s") { - spc = 1; - } else if ($i == "-n") { - # Handled later for builtins.h - continue - } else { - printf "\t\"\\%03o\\%03o%s\"\n", length($i), (spc ? 128 : 0) + NR-1, $i - spc = 0; - } - }}' $temp -echo '};' - -exec > builtins.h -cat <<\! -/* - * This file was generated by the mkbuiltins program. - */ - -#include <sys/cdefs.h> -! -tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ < $temp | - awk '{ printf "#define %s %d\n", $1, NR-1}' -echo ' -#define BUILTIN_SPECIAL 0x80 - -extern int (*const builtinfunc[])(int, char **); -extern const unsigned char builtincmd[]; -' -awk '{ printf "int %s(int, char **);\n", $1}' $temp - -# Build safe_builtin_always() -cat <<EOF - -static inline int -safe_builtin_always(int idx) -{ -EOF -awk ' -BEGIN { printed = 0 } -{ - for (i = 2 ; i <= NF ; i++) { - if ($i == "-s") { - continue - } else if ($i == "-n") { - nofork = 1; - } else { - if (nofork == 0) { - continue - } - if (printed == 1) { - printf " || \n\t " - } else { - printf "\tif (" - } - printf "idx == " toupper($1) - printed = 1 - nofork = 0; - # Only need to check each once - break - } - } -}' $temp - -cat << EOF -) - return (1); - return(0); -} -EOF - -rm -f $temp diff --git a/bin/1sh/mknodes.c b/bin/1sh/mknodes.c deleted file mode 100644 index cdc615fc..00000000 --- a/bin/1sh/mknodes.c +++ /dev/null @@ -1,461 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#if 0 -#ifndef lint -static char const copyright[] = -"@(#) Copyright (c) 1991, 1993\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif /* not lint */ - -#ifndef lint -static char sccsid[] = "@(#)mknodes.c 8.2 (Berkeley) 5/4/95"; -#endif /* not lint */ -#endif -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/mknodes.c 326025 2017-11-20 19:49:47Z pfg $"); - -/* - * This program reads the nodetypes file and nodes.c.pat file. It generates - * the files nodes.h and nodes.c. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <errno.h> -#include <stdarg.h> - -#define MAXTYPES 50 /* max number of node types */ -#define MAXFIELDS 20 /* max fields in a structure */ -#define BUFLEN 100 /* size of character buffers */ - -/* field types */ -#define T_NODE 1 /* union node *field */ -#define T_NODELIST 2 /* struct nodelist *field */ -#define T_STRING 3 -#define T_INT 4 /* int field */ -#define T_OTHER 5 /* other */ -#define T_TEMP 6 /* don't copy this field */ - - -struct field { /* a structure field */ - char *name; /* name of field */ - int type; /* type of field */ - char *decl; /* declaration of field */ -}; - - -struct str { /* struct representing a node structure */ - char *tag; /* structure tag */ - int nfields; /* number of fields in the structure */ - struct field field[MAXFIELDS]; /* the fields of the structure */ - int done; /* set if fully parsed */ -}; - - -static int ntypes; /* number of node types */ -static char *nodename[MAXTYPES]; /* names of the nodes */ -static struct str *nodestr[MAXTYPES]; /* type of structure used by the node */ -static int nstr; /* number of structures */ -static struct str str[MAXTYPES]; /* the structures */ -static struct str *curstr; /* current structure */ -static char line[1024]; -static int linno; -static char *linep; - -static void parsenode(void); -static void parsefield(void); -static void output(char *); -static void outsizes(FILE *); -static void outfunc(FILE *, int); -static void indent(int, FILE *); -static int nextfield(char *); -static void skipbl(void); -static int readline(FILE *); -static void error(const char *, ...) __printf0like(1, 2) __dead2; -static char *savestr(const char *); - - -int -main(int argc, char *argv[]) -{ - FILE *infp; - - if (argc != 3) - error("usage: mknodes file"); - if ((infp = fopen(argv[1], "r")) == NULL) - error("Can't open %s: %s", argv[1], strerror(errno)); - while (readline(infp)) { - if (line[0] == ' ' || line[0] == '\t') - parsefield(); - else if (line[0] != '\0') - parsenode(); - } - fclose(infp); - output(argv[2]); - exit(0); -} - - - -static void -parsenode(void) -{ - char name[BUFLEN]; - char tag[BUFLEN]; - struct str *sp; - - if (curstr && curstr->nfields > 0) - curstr->done = 1; - nextfield(name); - if (! nextfield(tag)) - error("Tag expected"); - if (*linep != '\0') - error("Garbage at end of line"); - nodename[ntypes] = savestr(name); - for (sp = str ; sp < str + nstr ; sp++) { - if (strcmp(sp->tag, tag) == 0) - break; - } - if (sp >= str + nstr) { - sp->tag = savestr(tag); - sp->nfields = 0; - curstr = sp; - nstr++; - } - nodestr[ntypes] = sp; - ntypes++; -} - - -static void -parsefield(void) -{ - char name[BUFLEN]; - char type[BUFLEN]; - char decl[2 * BUFLEN]; - struct field *fp; - - if (curstr == NULL || curstr->done) - error("No current structure to add field to"); - if (! nextfield(name)) - error("No field name"); - if (! nextfield(type)) - error("No field type"); - fp = &curstr->field[curstr->nfields]; - fp->name = savestr(name); - if (strcmp(type, "nodeptr") == 0) { - fp->type = T_NODE; - sprintf(decl, "union node *%s", name); - } else if (strcmp(type, "nodelist") == 0) { - fp->type = T_NODELIST; - sprintf(decl, "struct nodelist *%s", name); - } else if (strcmp(type, "string") == 0) { - fp->type = T_STRING; - sprintf(decl, "char *%s", name); - } else if (strcmp(type, "int") == 0) { - fp->type = T_INT; - sprintf(decl, "int %s", name); - } else if (strcmp(type, "other") == 0) { - fp->type = T_OTHER; - } else if (strcmp(type, "temp") == 0) { - fp->type = T_TEMP; - } else { - error("Unknown type %s", type); - } - if (fp->type == T_OTHER || fp->type == T_TEMP) { - skipbl(); - fp->decl = savestr(linep); - } else { - if (*linep) - error("Garbage at end of line"); - fp->decl = savestr(decl); - } - curstr->nfields++; -} - - -static const char writer[] = "\ -/*\n\ - * This file was generated by the mknodes program.\n\ - */\n\ -\n"; - -static void -output(char *file) -{ - FILE *hfile; - FILE *cfile; - FILE *patfile; - int i; - struct str *sp; - struct field *fp; - char *p; - - if ((patfile = fopen(file, "r")) == NULL) - error("Can't open %s: %s", file, strerror(errno)); - if ((hfile = fopen("nodes.h", "w")) == NULL) - error("Can't create nodes.h: %s", strerror(errno)); - if ((cfile = fopen("nodes.c", "w")) == NULL) - error("Can't create nodes.c"); - fputs(writer, hfile); - for (i = 0 ; i < ntypes ; i++) - fprintf(hfile, "#define %s %d\n", nodename[i], i); - fputs("\n\n\n", hfile); - for (sp = str ; sp < &str[nstr] ; sp++) { - fprintf(hfile, "struct %s {\n", sp->tag); - for (i = sp->nfields, fp = sp->field ; --i >= 0 ; fp++) { - fprintf(hfile, " %s;\n", fp->decl); - } - fputs("};\n\n\n", hfile); - } - fputs("union node {\n", hfile); - fprintf(hfile, " int type;\n"); - for (sp = str ; sp < &str[nstr] ; sp++) { - fprintf(hfile, " struct %s %s;\n", sp->tag, sp->tag); - } - fputs("};\n\n\n", hfile); - fputs("struct nodelist {\n", hfile); - fputs("\tstruct nodelist *next;\n", hfile); - fputs("\tunion node *n;\n", hfile); - fputs("};\n\n\n", hfile); - fputs("struct funcdef;\n", hfile); - fputs("struct funcdef *copyfunc(union node *);\n", hfile); - fputs("union node *getfuncnode(struct funcdef *);\n", hfile); - fputs("void reffunc(struct funcdef *);\n", hfile); - fputs("void unreffunc(struct funcdef *);\n", hfile); - if (ferror(hfile)) - error("Can't write to nodes.h"); - if (fclose(hfile)) - error("Can't close nodes.h"); - - fputs(writer, cfile); - while (fgets(line, sizeof line, patfile) != NULL) { - for (p = line ; *p == ' ' || *p == '\t' ; p++); - if (strcmp(p, "%SIZES\n") == 0) - outsizes(cfile); - else if (strcmp(p, "%CALCSIZE\n") == 0) - outfunc(cfile, 1); - else if (strcmp(p, "%COPY\n") == 0) - outfunc(cfile, 0); - else - fputs(line, cfile); - } - fclose(patfile); - if (ferror(cfile)) - error("Can't write to nodes.c"); - if (fclose(cfile)) - error("Can't close nodes.c"); -} - - - -static void -outsizes(FILE *cfile) -{ - int i; - - fprintf(cfile, "static const short nodesize[%d] = {\n", ntypes); - for (i = 0 ; i < ntypes ; i++) { - fprintf(cfile, " ALIGN(sizeof (struct %s)),\n", nodestr[i]->tag); - } - fprintf(cfile, "};\n"); -} - - -static void -outfunc(FILE *cfile, int calcsize) -{ - struct str *sp; - struct field *fp; - int i; - - fputs(" if (n == NULL)\n", cfile); - if (calcsize) - fputs(" return;\n", cfile); - else - fputs(" return NULL;\n", cfile); - if (calcsize) - fputs(" result->blocksize += nodesize[n->type];\n", cfile); - else { - fputs(" new = state->block;\n", cfile); - fputs(" state->block = (char *)state->block + nodesize[n->type];\n", cfile); - } - fputs(" switch (n->type) {\n", cfile); - for (sp = str ; sp < &str[nstr] ; sp++) { - for (i = 0 ; i < ntypes ; i++) { - if (nodestr[i] == sp) - fprintf(cfile, " case %s:\n", nodename[i]); - } - for (i = sp->nfields ; --i >= 1 ; ) { - fp = &sp->field[i]; - switch (fp->type) { - case T_NODE: - if (calcsize) { - indent(12, cfile); - fprintf(cfile, "calcsize(n->%s.%s, result);\n", - sp->tag, fp->name); - } else { - indent(12, cfile); - fprintf(cfile, "new->%s.%s = copynode(n->%s.%s, state);\n", - sp->tag, fp->name, sp->tag, fp->name); - } - break; - case T_NODELIST: - if (calcsize) { - indent(12, cfile); - fprintf(cfile, "sizenodelist(n->%s.%s, result);\n", - sp->tag, fp->name); - } else { - indent(12, cfile); - fprintf(cfile, "new->%s.%s = copynodelist(n->%s.%s, state);\n", - sp->tag, fp->name, sp->tag, fp->name); - } - break; - case T_STRING: - if (calcsize) { - indent(12, cfile); - fprintf(cfile, "result->stringsize += strlen(n->%s.%s) + 1;\n", - sp->tag, fp->name); - } else { - indent(12, cfile); - fprintf(cfile, "new->%s.%s = nodesavestr(n->%s.%s, state);\n", - sp->tag, fp->name, sp->tag, fp->name); - } - break; - case T_INT: - case T_OTHER: - if (! calcsize) { - indent(12, cfile); - fprintf(cfile, "new->%s.%s = n->%s.%s;\n", - sp->tag, fp->name, sp->tag, fp->name); - } - break; - } - } - indent(12, cfile); - fputs("break;\n", cfile); - } - fputs(" };\n", cfile); - if (! calcsize) - fputs(" new->type = n->type;\n", cfile); -} - - -static void -indent(int amount, FILE *fp) -{ - while (amount >= 8) { - putc('\t', fp); - amount -= 8; - } - while (--amount >= 0) { - putc(' ', fp); - } -} - - -static int -nextfield(char *buf) -{ - char *p, *q; - - p = linep; - while (*p == ' ' || *p == '\t') - p++; - q = buf; - while (*p != ' ' && *p != '\t' && *p != '\0') - *q++ = *p++; - *q = '\0'; - linep = p; - return (q > buf); -} - - -static void -skipbl(void) -{ - while (*linep == ' ' || *linep == '\t') - linep++; -} - - -static int -readline(FILE *infp) -{ - char *p; - - if (fgets(line, 1024, infp) == NULL) - return 0; - for (p = line ; *p != '#' && *p != '\n' && *p != '\0' ; p++); - while (p > line && (p[-1] == ' ' || p[-1] == '\t')) - p--; - *p = '\0'; - linep = line; - linno++; - if (p - line > BUFLEN) - error("Line too long"); - return 1; -} - - - -static void -error(const char *msg, ...) -{ - va_list va; - va_start(va, msg); - - (void) fprintf(stderr, "line %d: ", linno); - (void) vfprintf(stderr, msg, va); - (void) fputc('\n', stderr); - - va_end(va); - - exit(2); -} - - - -static char * -savestr(const char *s) -{ - char *p; - - if ((p = malloc(strlen(s) + 1)) == NULL) - error("Out of space"); - (void) strcpy(p, s); - return p; -} diff --git a/bin/1sh/mksyntax.c b/bin/1sh/mksyntax.c deleted file mode 100644 index a023da60..00000000 --- a/bin/1sh/mksyntax.c +++ /dev/null @@ -1,332 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#if 0 -#ifndef lint -static char const copyright[] = -"@(#) Copyright (c) 1991, 1993\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif /* not lint */ - -#ifndef lint -static char sccsid[] = "@(#)mksyntax.c 8.2 (Berkeley) 5/4/95"; -#endif /* not lint */ -#endif -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/mksyntax.c 334008 2018-05-21 21:52:48Z jilles $"); - -/* - * This program creates syntax.h and syntax.c. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include "parser.h" - - -struct synclass { - const char *name; - const char *comment; -}; - -/* Syntax classes */ -static const struct synclass synclass[] = { - { "CWORD", "character is nothing special" }, - { "CNL", "newline character" }, - { "CQNL", "newline character in quotes" }, - { "CBACK", "a backslash character" }, - { "CSBACK", "a backslash character in single quotes" }, - { "CSQUOTE", "single quote" }, - { "CDQUOTE", "double quote" }, - { "CENDQUOTE", "a terminating quote" }, - { "CBQUOTE", "backwards single quote" }, - { "CVAR", "a dollar sign" }, - { "CENDVAR", "a '}' character" }, - { "CLP", "a left paren in arithmetic" }, - { "CRP", "a right paren in arithmetic" }, - { "CEOF", "end of file" }, - { "CCTL", "like CWORD, except it must be escaped" }, - { "CSPCL", "these terminate a word" }, - { "CIGN", "character should be ignored" }, - { NULL, NULL } -}; - - -/* - * Syntax classes for is_ functions. Warning: if you add new classes - * you may have to change the definition of the is_in_name macro. - */ -static const struct synclass is_entry[] = { - { "ISDIGIT", "a digit" }, - { "ISUPPER", "an upper case letter" }, - { "ISLOWER", "a lower case letter" }, - { "ISUNDER", "an underscore" }, - { "ISSPECL", "the name of a special parameter" }, - { NULL, NULL } -}; - -static const char writer[] = "\ -/*\n\ - * This file was generated by the mksyntax program.\n\ - */\n\ -\n"; - - -static FILE *cfile; -static FILE *hfile; - -static void add_default(void); -static void finish(void); -static void init(const char *); -static void add(const char *, const char *); -static void output_type_macros(void); - -int -main(int argc __unused, char **argv __unused) -{ - int i; - char buf[80]; - int pos; - - /* Create output files */ - if ((cfile = fopen("syntax.c", "w")) == NULL) { - perror("syntax.c"); - exit(2); - } - if ((hfile = fopen("syntax.h", "w")) == NULL) { - perror("syntax.h"); - exit(2); - } - fputs(writer, hfile); - fputs(writer, cfile); - - fputs("#include <sys/cdefs.h>\n", hfile); - fputs("#include <limits.h>\n\n", hfile); - - /* Generate the #define statements in the header file */ - fputs("/* Syntax classes */\n", hfile); - for (i = 0 ; synclass[i].name ; i++) { - sprintf(buf, "#define %s %d", synclass[i].name, i); - fputs(buf, hfile); - for (pos = strlen(buf) ; pos < 32 ; pos = (pos + 8) & ~07) - putc('\t', hfile); - fprintf(hfile, "/* %s */\n", synclass[i].comment); - } - putc('\n', hfile); - fputs("/* Syntax classes for is_ functions */\n", hfile); - for (i = 0 ; is_entry[i].name ; i++) { - sprintf(buf, "#define %s %#o", is_entry[i].name, 1 << i); - fputs(buf, hfile); - for (pos = strlen(buf) ; pos < 32 ; pos = (pos + 8) & ~07) - putc('\t', hfile); - fprintf(hfile, "/* %s */\n", is_entry[i].comment); - } - putc('\n', hfile); - fputs("#define SYNBASE (1 - CHAR_MIN)\n", hfile); - fputs("#define PEOF -SYNBASE\n\n", hfile); - putc('\n', hfile); - fputs("#define BASESYNTAX (basesyntax + SYNBASE)\n", hfile); - fputs("#define DQSYNTAX (dqsyntax + SYNBASE)\n", hfile); - fputs("#define SQSYNTAX (sqsyntax + SYNBASE)\n", hfile); - fputs("#define ARISYNTAX (arisyntax + SYNBASE)\n", hfile); - putc('\n', hfile); - output_type_macros(); /* is_digit, etc. */ - putc('\n', hfile); - - /* Generate the syntax tables. */ - fputs("#include \"parser.h\"\n", cfile); - fputs("#include \"shell.h\"\n", cfile); - fputs("#include \"syntax.h\"\n\n", cfile); - - fputs("/* syntax table used when not in quotes */\n", cfile); - init("basesyntax"); - add_default(); - add("\n", "CNL"); - add("\\", "CBACK"); - add("'", "CSQUOTE"); - add("\"", "CDQUOTE"); - add("`", "CBQUOTE"); - add("$", "CVAR"); - add("}", "CENDVAR"); - add("<>();&| \t", "CSPCL"); - finish(); - - fputs("\n/* syntax table used when in double quotes */\n", cfile); - init("dqsyntax"); - add_default(); - add("\n", "CQNL"); - add("\\", "CBACK"); - add("\"", "CENDQUOTE"); - add("`", "CBQUOTE"); - add("$", "CVAR"); - add("}", "CENDVAR"); - /* ':/' for tilde expansion, '-^]' for [a\-x] pattern ranges */ - add("!*?[]=~:/-^", "CCTL"); - finish(); - - fputs("\n/* syntax table used when in single quotes */\n", cfile); - init("sqsyntax"); - add_default(); - add("\n", "CQNL"); - add("\\", "CSBACK"); - add("'", "CENDQUOTE"); - /* ':/' for tilde expansion, '-^]' for [a\-x] pattern ranges */ - add("!*?[]=~:/-^", "CCTL"); - finish(); - - fputs("\n/* syntax table used when in arithmetic */\n", cfile); - init("arisyntax"); - add_default(); - add("\n", "CQNL"); - add("\\", "CBACK"); - add("`", "CBQUOTE"); - add("\"", "CIGN"); - add("$", "CVAR"); - add("}", "CENDVAR"); - add("(", "CLP"); - add(")", "CRP"); - finish(); - - fputs("\n/* character classification table */\n", cfile); - init("is_type"); - add("0123456789", "ISDIGIT"); - add("abcdefghijklmnopqrstuvwxyz", "ISLOWER"); - add("ABCDEFGHIJKLMNOPQRSTUVWXYZ", "ISUPPER"); - add("_", "ISUNDER"); - add("#?$!-*@", "ISSPECL"); - finish(); - - exit(0); -} - - -/* - * Output the header and declaration of a syntax table. - */ - -static void -init(const char *name) -{ - fprintf(hfile, "extern const char %s[];\n", name); - fprintf(cfile, "const char %s[SYNBASE + CHAR_MAX + 1] = {\n", name); -} - - -static void -add_one(const char *key, const char *type) -{ - fprintf(cfile, "\t[SYNBASE + %s] = %s,\n", key, type); -} - - -/* - * Add default values to the syntax table. - */ - -static void -add_default(void) -{ - add_one("PEOF", "CEOF"); - add_one("CTLESC", "CCTL"); - add_one("CTLVAR", "CCTL"); - add_one("CTLENDVAR", "CCTL"); - add_one("CTLBACKQ", "CCTL"); - add_one("CTLBACKQ + CTLQUOTE", "CCTL"); - add_one("CTLARI", "CCTL"); - add_one("CTLENDARI", "CCTL"); - add_one("CTLQUOTEMARK", "CCTL"); - add_one("CTLQUOTEEND", "CCTL"); -} - - -/* - * Output the footer of a syntax table. - */ - -static void -finish(void) -{ - fputs("};\n", cfile); -} - - -/* - * Add entries to the syntax table. - */ - -static void -add(const char *p, const char *type) -{ - for (; *p; ++p) { - char c = *p; - switch (c) { - case '\t': c = 't'; break; - case '\n': c = 'n'; break; - case '\'': c = '\''; break; - case '\\': c = '\\'; break; - - default: - fprintf(cfile, "\t[SYNBASE + '%c'] = %s,\n", c, type); - continue; - } - fprintf(cfile, "\t[SYNBASE + '\\%c'] = %s,\n", c, type); - } -} - - -/* - * Output character classification macros (e.g. is_digit). If digits are - * contiguous, we can test for them quickly. - */ - -static const char *macro[] = { - "#define is_digit(c)\t((unsigned int)((c) - '0') <= 9)", - "#define is_eof(c)\t((c) == PEOF)", - "#define is_alpha(c)\t((is_type+SYNBASE)[(int)c] & (ISUPPER|ISLOWER))", - "#define is_name(c)\t((is_type+SYNBASE)[(int)c] & (ISUPPER|ISLOWER|ISUNDER))", - "#define is_in_name(c)\t((is_type+SYNBASE)[(int)c] & (ISUPPER|ISLOWER|ISUNDER|ISDIGIT))", - "#define is_special(c)\t((is_type+SYNBASE)[(int)c] & (ISSPECL|ISDIGIT))", - "#define digit_val(c)\t((c) - '0')", - NULL -}; - -static void -output_type_macros(void) -{ - const char **pp; - - for (pp = macro ; *pp ; pp++) - fprintf(hfile, "%s\n", *pp); -} diff --git a/bin/1sh/mktokens b/bin/1sh/mktokens deleted file mode 100644 index da6ae962..00000000 --- a/bin/1sh/mktokens +++ /dev/null @@ -1,93 +0,0 @@ -#!/bin/sh - - -#- -# Copyright (c) 1991, 1993 -# The Regents of the University of California. All rights reserved. -# -# This code is derived from software contributed to Berkeley by -# Kenneth Almquist. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)mktokens 8.1 (Berkeley) 5/31/93 -# $FreeBSD: releng/12.0/bin/sh/mktokens 328934 2018-02-06 15:41:35Z arichardson $ - -# The following is a list of tokens. The second column is nonzero if the -# token marks the end of a list. The third column is the name to print in -# error messages. - -temp=`mktemp -t ka` -cat > $temp <<\! -TEOF 1 end of file -TNL 0 newline -TSEMI 0 ";" -TBACKGND 0 "&" -TAND 0 "&&" -TOR 0 "||" -TPIPE 0 "|" -TLP 0 "(" -TRP 1 ")" -TENDCASE 1 ";;" -TFALLTHRU 1 ";&" -TREDIR 0 redirection -TWORD 0 word -TIF 0 "if" -TTHEN 1 "then" -TELSE 1 "else" -TELIF 1 "elif" -TFI 1 "fi" -TWHILE 0 "while" -TUNTIL 0 "until" -TFOR 0 "for" -TDO 1 "do" -TDONE 1 "done" -TBEGIN 0 "{" -TEND 1 "}" -TCASE 0 "case" -TESAC 1 "esac" -TNOT 0 "!" -! -nl=`wc -l $temp` -exec > token.h -awk '{print "#define " $1 " " NR-1}' $temp -echo ' -/* Array indicating which tokens mark the end of a list */ -static const char tokendlist[] = {' -awk '{print "\t" $2 ","}' $temp -echo '}; - -static const char *const tokname[] = {' -sed -e 's/"/\\"/g' \ - -e 's/[^ ]*[ ][ ]*[^ ]*[ ][ ]*\(.*\)/ "\1",/' \ - $temp -echo '}; -' -sed 's/"//g' $temp | awk ' -/TIF/{print "#define KWDOFFSET " NR-1; print ""; print "const char *const parsekwd[] = {"} -/TIF/,/neverfound/{print " \"" $3 "\","}' -echo ' 0 -};' - -rm $temp diff --git a/bin/1sh/myhistedit.h b/bin/1sh/myhistedit.h deleted file mode 100644 index feb4803e..00000000 --- a/bin/1sh/myhistedit.h +++ /dev/null @@ -1,45 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)myhistedit.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/myhistedit.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -#include <histedit.h> - -extern History *hist; -extern EditLine *el; -extern int displayhist; - -void histedit(void); -void sethistfile(const char *); -void sethistsize(const char *); -void setterm(const char *); - diff --git a/bin/1sh/mystring.c b/bin/1sh/mystring.c deleted file mode 100644 index a96d4fa5..00000000 --- a/bin/1sh/mystring.c +++ /dev/null @@ -1,100 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)mystring.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/mystring.c 326025 2017-11-20 19:49:47Z pfg $"); - -/* - * String functions. - * - * equal(s1, s2) Return true if strings are equal. - * number(s) Convert a string of digits to an integer. - * is_number(s) Return true if s is a string of digits. - */ - -#include <stdlib.h> -#include "shell.h" -#include "syntax.h" -#include "error.h" -#include "mystring.h" - - -char nullstr[1]; /* zero length string */ - -/* - * equal - #defined in mystring.h - */ - - -/* - * Convert a string of digits to an integer, printing an error message on - * failure. - */ - -int -number(const char *s) -{ - if (! is_number(s)) - error("Illegal number: %s", s); - return atoi(s); -} - - - -/* - * Check for a valid number. This should be elsewhere. - */ - -int -is_number(const char *p) -{ - const char *q; - - if (*p == '\0') - return 0; - while (*p == '0') - p++; - for (q = p; *q != '\0'; q++) - if (! is_digit(*q)) - return 0; - if (q - p > 10 || - (q - p == 10 && memcmp(p, "2147483647", 10) > 0)) - return 0; - return 1; -} diff --git a/bin/1sh/mystring.h b/bin/1sh/mystring.h deleted file mode 100644 index f4fc9af4..00000000 --- a/bin/1sh/mystring.h +++ /dev/null @@ -1,43 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)mystring.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/mystring.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -#include <string.h> - -int number(const char *); -int is_number(const char *); - -#define equal(s1, s2) (strcmp(s1, s2) == 0) diff --git a/bin/1sh/nodes.c.pat b/bin/1sh/nodes.c.pat deleted file mode 100644 index eeb82737..00000000 --- a/bin/1sh/nodes.c.pat +++ /dev/null @@ -1,193 +0,0 @@ -/*- - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)nodes.c.pat 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/nodes.c.pat 314436 2017-02-28 23:42:47Z imp $ - */ - -#include <sys/param.h> -#include <stdlib.h> -#include <stddef.h> -/* - * Routine for dealing with parsed shell commands. - */ - -#include "shell.h" -#include "nodes.h" -#include "memalloc.h" -#include "mystring.h" - - -struct nodesize { - int blocksize; /* size of structures in function */ - int stringsize; /* size of strings in node */ -}; - -struct nodecopystate { - pointer block; /* block to allocate function from */ - char *string; /* block to allocate strings from */ -}; - -%SIZES - - -static void calcsize(union node *, struct nodesize *); -static void sizenodelist(struct nodelist *, struct nodesize *); -static union node *copynode(union node *, struct nodecopystate *); -static struct nodelist *copynodelist(struct nodelist *, struct nodecopystate *); -static char *nodesavestr(const char *, struct nodecopystate *); - - -struct funcdef { - unsigned int refcount; - union node n; -}; - -/* - * Make a copy of a parse tree. - */ - -struct funcdef * -copyfunc(union node *n) -{ - struct nodesize sz; - struct nodecopystate st; - struct funcdef *fn; - - if (n == NULL) - return NULL; - sz.blocksize = offsetof(struct funcdef, n); - sz.stringsize = 0; - calcsize(n, &sz); - fn = ckmalloc(sz.blocksize + sz.stringsize); - fn->refcount = 1; - st.block = (char *)fn + offsetof(struct funcdef, n); - st.string = (char *)fn + sz.blocksize; - copynode(n, &st); - return fn; -} - - -union node * -getfuncnode(struct funcdef *fn) -{ - return fn == NULL ? NULL : &fn->n; -} - - -static void -calcsize(union node *n, struct nodesize *result) -{ - %CALCSIZE -} - - - -static void -sizenodelist(struct nodelist *lp, struct nodesize *result) -{ - while (lp) { - result->blocksize += ALIGN(sizeof(struct nodelist)); - calcsize(lp->n, result); - lp = lp->next; - } -} - - - -static union node * -copynode(union node *n, struct nodecopystate *state) -{ - union node *new; - - %COPY - return new; -} - - -static struct nodelist * -copynodelist(struct nodelist *lp, struct nodecopystate *state) -{ - struct nodelist *start; - struct nodelist **lpp; - - lpp = &start; - while (lp) { - *lpp = state->block; - state->block = (char *)state->block + - ALIGN(sizeof(struct nodelist)); - (*lpp)->n = copynode(lp->n, state); - lp = lp->next; - lpp = &(*lpp)->next; - } - *lpp = NULL; - return start; -} - - - -static char * -nodesavestr(const char *s, struct nodecopystate *state) -{ - const char *p = s; - char *q = state->string; - char *rtn = state->string; - - while ((*q++ = *p++) != '\0') - continue; - state->string = q; - return rtn; -} - - -void -reffunc(struct funcdef *fn) -{ - if (fn) - fn->refcount++; -} - - -/* - * Decrement the reference count of a function definition, freeing it - * if it falls to 0. - */ - -void -unreffunc(struct funcdef *fn) -{ - if (fn) { - fn->refcount--; - if (fn->refcount > 0) - return; - ckfree(fn); - } -} diff --git a/bin/1sh/nodetypes b/bin/1sh/nodetypes deleted file mode 100644 index 0bb29c8e..00000000 --- a/bin/1sh/nodetypes +++ /dev/null @@ -1,145 +0,0 @@ -#- -# Copyright (c) 1991, 1993 -# The Regents of the University of California. All rights reserved. -# -# This code is derived from software contributed to Berkeley by -# Kenneth Almquist. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)nodetypes 8.2 (Berkeley) 5/4/95 -# $FreeBSD: releng/12.0/bin/sh/nodetypes 314436 2017-02-28 23:42:47Z imp $ - -# This file describes the nodes used in parse trees. Unindented lines -# contain a node type followed by a structure tag. Subsequent indented -# lines specify the fields of the structure. Several node types can share -# the same structure, in which case the fields of the structure should be -# specified only once. -# -# A field of a structure is described by the name of the field followed -# by a type. The currently implemented types are: -# nodeptr - a pointer to a node -# nodelist - a pointer to a list of nodes -# string - a pointer to a nul terminated string -# int - an integer -# other - any type that can be copied by assignment -# temp - a field that doesn't have to be copied when the node is copied -# The last two types should be followed by the text of a C declaration for -# the field. - -NSEMI nbinary # two commands separated by a semicolon - type int - ch1 nodeptr # the first child - ch2 nodeptr # the second child - -NCMD ncmd # a simple command - type int - args nodeptr # the arguments - redirect nodeptr # list of file redirections - -NPIPE npipe # a pipeline - type int - backgnd int # set to run pipeline in background - cmdlist nodelist # the commands in the pipeline - -NREDIR nredir # redirection (of a compex command) - type int - n nodeptr # the command - redirect nodeptr # list of file redirections - -NBACKGND nredir # run command in background -NSUBSHELL nredir # run command in a subshell - -NAND nbinary # the && operator -NOR nbinary # the || operator - -NIF nif # the if statement. Elif clauses are handled - type int # using multiple if nodes. - test nodeptr # if test - ifpart nodeptr # then ifpart - elsepart nodeptr # else elsepart - -NWHILE nbinary # the while statement. First child is the test -NUNTIL nbinary # the until statement - -NFOR nfor # the for statement - type int - args nodeptr # for var in args - body nodeptr # do body; done - var string # the for variable - -NCASE ncase # a case statement - type int - expr nodeptr # the word to switch on - cases nodeptr # the list of cases (NCLIST nodes) - -NCLIST nclist # a case ending with ;; - type int - next nodeptr # the next case in list - pattern nodeptr # list of patterns for this case - body nodeptr # code to execute for this case - -NCLISTFALLTHRU nclist # a case ending with ;& - -NDEFUN narg # define a function. The "next" field contains - # the body of the function. - -NARG narg # represents a word - type int - next nodeptr # next word in list - text string # the text of the word - backquote nodelist # list of commands in back quotes - -NTO nfile # fd> fname -NFROM nfile # fd< fname -NFROMTO nfile # fd<> fname -NAPPEND nfile # fd>> fname -NCLOBBER nfile # fd>| fname - type int - fd int # file descriptor being redirected - next nodeptr # next redirection in list - fname nodeptr # file name, in a NARG node - expfname temp char *expfname # actual file name - -NTOFD ndup # fd<&dupfd -NFROMFD ndup # fd>&dupfd - type int - fd int # file descriptor being redirected - next nodeptr # next redirection in list - dupfd int # file descriptor to duplicate - vname nodeptr # file name if fd>&$var - - -NHERE nhere # fd<<\! -NXHERE nhere # fd<<! - type int - fd int # file descriptor being redirected - next nodeptr # next redirection in list - doc nodeptr # input to command (NARG node) - expdoc temp const char *expdoc # actual document (for NXHERE) - -NNOT nnot # ! command (actually pipeline) - type int - com nodeptr diff --git a/bin/1sh/options.c b/bin/1sh/options.c deleted file mode 100644 index 422c0f19..00000000 --- a/bin/1sh/options.c +++ /dev/null @@ -1,594 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)options.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/options.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <signal.h> -#include <unistd.h> -#include <stdlib.h> - -#include "shell.h" -#define DEFINE_OPTIONS -#include "options.h" -#undef DEFINE_OPTIONS -#include "nodes.h" /* for other header files */ -#include "eval.h" -#include "jobs.h" -#include "input.h" -#include "output.h" -#include "trap.h" -#include "var.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "builtins.h" -#ifndef NO_HISTORY -#include "myhistedit.h" -#endif - -char *arg0; /* value of $0 */ -struct shparam shellparam; /* current positional parameters */ -char **argptr; /* argument list for builtin commands */ -char *shoptarg; /* set by nextopt (like getopt) */ -char *nextopt_optptr; /* used by nextopt */ - -char *minusc; /* argument to -c option */ - - -static void options(int); -static void minus_o(char *, int); -static void setoption(int, int); -static void setoptionbyindex(int, int); -static void setparam(int, char **); -static int getopts(char *, char *, char **, char ***, char **); - - -/* - * Process the shell command line arguments. - */ - -void -procargs(int argc, char **argv) -{ - int i; - char *scriptname; - - argptr = argv; - if (argc > 0) - argptr++; - for (i = 0; i < NOPTS; i++) - optval[i] = 2; - privileged = (getuid() != geteuid() || getgid() != getegid()); - options(1); - if (*argptr == NULL && minusc == NULL) - sflag = 1; - if (iflag != 0 && sflag == 1 && isatty(0) && isatty(1)) { - iflag = 1; - if (Eflag == 2) - Eflag = 1; - } - if (mflag == 2) - mflag = iflag; - for (i = 0; i < NOPTS; i++) - if (optval[i] == 2) - optval[i] = 0; - arg0 = argv[0]; - if (sflag == 0 && minusc == NULL) { - scriptname = *argptr++; - setinputfile(scriptname, 0); - commandname = arg0 = scriptname; - } - /* POSIX 1003.2: first arg after -c cmd is $0, remainder $1... */ - if (argptr && minusc && *argptr) - arg0 = *argptr++; - - shellparam.p = argptr; - shellparam.reset = 1; - /* assert(shellparam.malloc == 0 && shellparam.nparam == 0); */ - while (*argptr) { - shellparam.nparam++; - argptr++; - } - optschanged(); -} - - -void -optschanged(void) -{ - setinteractive(); -#ifndef NO_HISTORY - histedit(); -#endif - setjobctl(mflag); -} - -/* - * Process shell options. The global variable argptr contains a pointer - * to the argument list; we advance it past the options. - * If cmdline is true, process the shell's argv; otherwise, process arguments - * to the set special builtin. - */ - -static void -options(int cmdline) -{ - char *kp, *p; - int val; - int c; - - if (cmdline) - minusc = NULL; - while ((p = *argptr) != NULL) { - argptr++; - if ((c = *p++) == '-') { - val = 1; - /* A "-" or "--" terminates options */ - if (p[0] == '\0') - goto end_options1; - if (p[0] == '-' && p[1] == '\0') - goto end_options2; - /** - * For the benefit of `#!' lines in shell scripts, - * treat a string of '-- *#.*' the same as '--'. - * This is needed so that a script starting with: - * #!/bin/sh -- # -*- perl -*- - * will continue to work after a change is made to - * kern/imgact_shell.c to NOT token-ize the options - * specified on a '#!' line. A bit of a kludge, - * but that trick is recommended in documentation - * for some scripting languages, and we might as - * well continue to support it. - */ - if (p[0] == '-') { - kp = p + 1; - while (*kp == ' ' || *kp == '\t') - kp++; - if (*kp == '#' || *kp == '\0') - goto end_options2; - } - } else if (c == '+') { - val = 0; - } else { - argptr--; - break; - } - while ((c = *p++) != '\0') { - if (c == 'c' && cmdline) { - char *q; - - q = *argptr++; - if (q == NULL || minusc != NULL) - error("Bad -c option"); - minusc = q; - } else if (c == 'o') { - minus_o(*argptr, val); - if (*argptr) - argptr++; - } else - setoption(c, val); - } - } - return; - - /* When processing `set', a single "-" means turn off -x and -v */ -end_options1: - if (!cmdline) { - xflag = vflag = 0; - return; - } - - /* - * When processing `set', a "--" means the remaining arguments - * replace the positional parameters in the active shell. If - * there are no remaining options, then all the positional - * parameters are cleared (equivalent to doing ``shift $#''). - */ -end_options2: - if (!cmdline) { - if (*argptr == NULL) - setparam(0, argptr); - return; - } - - /* - * At this point we are processing options given to 'sh' on a command - * line. If an end-of-options marker ("-" or "--") is followed by an - * arg of "#", then skip over all remaining arguments. Some scripting - * languages (e.g.: perl) document that /bin/sh will implement this - * behavior, and they recommend that users take advantage of it to - * solve certain issues that can come up when writing a perl script. - * Yes, this feature is in /bin/sh to help users write perl scripts. - */ - p = *argptr; - if (p != NULL && p[0] == '#' && p[1] == '\0') { - while (*argptr != NULL) - argptr++; - /* We need to keep the final argument */ - argptr--; - } -} - -static void -minus_o(char *name, int val) -{ - int i; - const unsigned char *on; - size_t len; - - if (name == NULL) { - if (val) { - /* "Pretty" output. */ - out1str("Current option settings\n"); - for (i = 0, on = optname; i < NOPTS; i++, on += *on + 1) - out1fmt("%-16.*s%s\n", *on, on + 1, - optval[i] ? "on" : "off"); - } else { - /* Output suitable for re-input to shell. */ - for (i = 0, on = optname; i < NOPTS; i++, on += *on + 1) - out1fmt("%s %co %.*s%s", - i % 6 == 0 ? "set" : "", - optval[i] ? '-' : '+', - *on, on + 1, - i % 6 == 5 || i == NOPTS - 1 ? "\n" : ""); - } - } else { - len = strlen(name); - for (i = 0, on = optname; i < NOPTS; i++, on += *on + 1) - if (*on == len && memcmp(on + 1, name, len) == 0) { - setoptionbyindex(i, val); - return; - } - error("Illegal option -o %s", name); - } -} - - -static void -setoptionbyindex(int idx, int val) -{ - if (&optval[idx] == &privileged && !val && privileged) { - if (setgid(getgid()) == -1) - error("setgid"); - if (setuid(getuid()) == -1) - error("setuid"); - } - optval[idx] = val; - if (val) { - /* #%$ hack for ksh semantics */ - if (&optval[idx] == &Vflag) - Eflag = 0; - else if (&optval[idx] == &Eflag) - Vflag = 0; - } -} - -static void -setoption(int flag, int val) -{ - int i; - - for (i = 0; i < NSHORTOPTS; i++) - if (optletter[i] == flag) { - setoptionbyindex(i, val); - return; - } - error("Illegal option -%c", flag); -} - - -/* - * Set the shell parameters. - */ - -static void -setparam(int argc, char **argv) -{ - char **newparam; - char **ap; - - ap = newparam = ckmalloc((argc + 1) * sizeof *ap); - while (*argv) { - *ap++ = savestr(*argv++); - } - *ap = NULL; - freeparam(&shellparam); - shellparam.malloc = 1; - shellparam.nparam = argc; - shellparam.p = newparam; - shellparam.optp = NULL; - shellparam.reset = 1; - shellparam.optnext = NULL; -} - - -/* - * Free the list of positional parameters. - */ - -void -freeparam(struct shparam *param) -{ - char **ap; - - if (param->malloc) { - for (ap = param->p ; *ap ; ap++) - ckfree(*ap); - ckfree(param->p); - } - if (param->optp) { - for (ap = param->optp ; *ap ; ap++) - ckfree(*ap); - ckfree(param->optp); - } -} - - - -/* - * The shift builtin command. - */ - -int -shiftcmd(int argc, char **argv) -{ - int i, n; - - n = 1; - if (argc > 1) - n = number(argv[1]); - if (n > shellparam.nparam) - return 1; - INTOFF; - shellparam.nparam -= n; - if (shellparam.malloc) - for (i = 0; i < n; i++) - ckfree(shellparam.p[i]); - memmove(shellparam.p, shellparam.p + n, - (shellparam.nparam + 1) * sizeof(shellparam.p[0])); - shellparam.reset = 1; - INTON; - return 0; -} - - - -/* - * The set builtin command. - */ - -int -setcmd(int argc, char **argv) -{ - if (argc == 1) - return showvarscmd(argc, argv); - INTOFF; - options(0); - optschanged(); - if (*argptr != NULL) { - setparam(argc - (argptr - argv), argptr); - } - INTON; - return 0; -} - - -void -getoptsreset(const char *value) -{ - while (*value == '0') - value++; - if (strcmp(value, "1") == 0) - shellparam.reset = 1; -} - -/* - * The getopts builtin. Shellparam.optnext points to the next argument - * to be processed. Shellparam.optptr points to the next character to - * be processed in the current argument. If shellparam.optnext is NULL, - * then it's the first time getopts has been called. - */ - -int -getoptscmd(int argc, char **argv) -{ - char **optbase = NULL, **ap; - int i; - - if (argc < 3) - error("usage: getopts optstring var [arg]"); - - if (shellparam.reset == 1) { - INTOFF; - if (shellparam.optp) { - for (ap = shellparam.optp ; *ap ; ap++) - ckfree(*ap); - ckfree(shellparam.optp); - shellparam.optp = NULL; - } - if (argc > 3) { - shellparam.optp = ckmalloc((argc - 2) * sizeof *ap); - memset(shellparam.optp, '\0', (argc - 2) * sizeof *ap); - for (i = 0; i < argc - 3; i++) - shellparam.optp[i] = savestr(argv[i + 3]); - } - INTON; - optbase = argc == 3 ? shellparam.p : shellparam.optp; - shellparam.optnext = optbase; - shellparam.optptr = NULL; - shellparam.reset = 0; - } else - optbase = shellparam.optp ? shellparam.optp : shellparam.p; - - return getopts(argv[1], argv[2], optbase, &shellparam.optnext, - &shellparam.optptr); -} - -static int -getopts(char *optstr, char *optvar, char **optfirst, char ***optnext, - char **optptr) -{ - char *p, *q; - char c = '?'; - int done = 0; - int ind = 0; - int err = 0; - char s[10]; - const char *newoptarg = NULL; - - if ((p = *optptr) == NULL || *p == '\0') { - /* Current word is done, advance */ - if (*optnext == NULL) - return 1; - p = **optnext; - if (p == NULL || *p != '-' || *++p == '\0') { -atend: - ind = *optnext - optfirst + 1; - *optnext = NULL; - p = NULL; - done = 1; - goto out; - } - (*optnext)++; - if (p[0] == '-' && p[1] == '\0') /* check for "--" */ - goto atend; - } - - c = *p++; - for (q = optstr; *q != c; ) { - if (*q == '\0') { - if (optstr[0] == ':') { - s[0] = c; - s[1] = '\0'; - newoptarg = s; - } - else - out2fmt_flush("Illegal option -%c\n", c); - c = '?'; - goto out; - } - if (*++q == ':') - q++; - } - - if (*++q == ':') { - if (*p == '\0' && (p = **optnext) == NULL) { - if (optstr[0] == ':') { - s[0] = c; - s[1] = '\0'; - newoptarg = s; - c = ':'; - } - else { - out2fmt_flush("No arg for -%c option\n", c); - c = '?'; - } - goto out; - } - - if (p == **optnext) - (*optnext)++; - newoptarg = p; - p = NULL; - } - -out: - if (*optnext != NULL) - ind = *optnext - optfirst + 1; - *optptr = p; - if (newoptarg != NULL) - err |= setvarsafe("OPTARG", newoptarg, 0); - else { - INTOFF; - err |= unsetvar("OPTARG"); - INTON; - } - fmtstr(s, sizeof(s), "%d", ind); - err |= setvarsafe("OPTIND", s, VNOFUNC); - s[0] = c; - s[1] = '\0'; - err |= setvarsafe(optvar, s, 0); - if (err) { - *optnext = NULL; - *optptr = NULL; - flushall(); - exraise(EXERROR); - } - return done; -} - -/* - * Standard option processing (a la getopt) for builtin routines. The - * only argument that is passed to nextopt is the option string; the - * other arguments are unnecessary. It returns the option, or '\0' on - * end of input. - */ - -int -nextopt(const char *optstring) -{ - char *p; - const char *q; - char c; - - if ((p = nextopt_optptr) == NULL || *p == '\0') { - p = *argptr; - if (p == NULL || *p != '-' || *++p == '\0') - return '\0'; - argptr++; - if (p[0] == '-' && p[1] == '\0') /* check for "--" */ - return '\0'; - } - c = *p++; - for (q = optstring ; *q != c ; ) { - if (*q == '\0') - error("Illegal option -%c", c); - if (*++q == ':') - q++; - } - if (*++q == ':') { - if (*p == '\0' && (p = *argptr++) == NULL) - error("No arg for -%c option", c); - shoptarg = p; - p = NULL; - } - nextopt_optptr = p; - return c; -} diff --git a/bin/1sh/options.h b/bin/1sh/options.h deleted file mode 100644 index 1242b095..00000000 --- a/bin/1sh/options.h +++ /dev/null @@ -1,115 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)options.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/options.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -struct shparam { - int nparam; /* # of positional parameters (without $0) */ - unsigned char malloc; /* if parameter list dynamically allocated */ - unsigned char reset; /* if getopts has been reset */ - char **p; /* parameter list */ - char **optp; /* parameter list for getopts */ - char **optnext; /* next parameter to be processed by getopts */ - char *optptr; /* used by getopts */ -}; - - - -#define eflag optval[0] -#define fflag optval[1] -#define Iflag optval[2] -#define iflag optval[3] -#define mflag optval[4] -#define nflag optval[5] -#define sflag optval[6] -#define xflag optval[7] -#define vflag optval[8] -#define Vflag optval[9] -#define Eflag optval[10] -#define Cflag optval[11] -#define aflag optval[12] -#define bflag optval[13] -#define uflag optval[14] -#define privileged optval[15] -#define Tflag optval[16] -#define Pflag optval[17] -#define hflag optval[18] -#define nologflag optval[19] - -#define NSHORTOPTS 19 -#define NOPTS 20 - -extern char optval[NOPTS]; -extern const char optletter[NSHORTOPTS]; -#ifdef DEFINE_OPTIONS -char optval[NOPTS]; -const char optletter[NSHORTOPTS] = "efIimnsxvVECabupTPh"; -static const unsigned char optname[] = - "\007errexit" - "\006noglob" - "\011ignoreeof" - "\013interactive" - "\007monitor" - "\006noexec" - "\005stdin" - "\006xtrace" - "\007verbose" - "\002vi" - "\005emacs" - "\011noclobber" - "\011allexport" - "\006notify" - "\007nounset" - "\012privileged" - "\012trapsasync" - "\010physical" - "\010trackall" - "\005nolog" -; -#endif - - -extern char *minusc; /* argument to -c option */ -extern char *arg0; /* $0 */ -extern struct shparam shellparam; /* $@ */ -extern char **argptr; /* argument list for builtin commands */ -extern char *shoptarg; /* set by nextopt */ -extern char *nextopt_optptr; /* used by nextopt */ - -void procargs(int, char **); -void optschanged(void); -void freeparam(struct shparam *); -int nextopt(const char *); -void getoptsreset(const char *); diff --git a/bin/1sh/output.c b/bin/1sh/output.c deleted file mode 100644 index 1eb8b692..00000000 --- a/bin/1sh/output.c +++ /dev/null @@ -1,370 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)output.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/output.c 326025 2017-11-20 19:49:47Z pfg $"); - -/* - * Shell output routines. We use our own output routines because: - * When a builtin command is interrupted we have to discard - * any pending output. - * When a builtin command appears in back quotes, we want to - * save the output of the command in a region obtained - * via malloc, rather than doing a fork and reading the - * output of the command via a pipe. - */ - -#include <stdio.h> /* defines BUFSIZ */ -#include <string.h> -#include <stdarg.h> -#include <errno.h> -#include <unistd.h> -#include <stdlib.h> -#include <wchar.h> -#include <wctype.h> - -#include "shell.h" -#include "syntax.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "var.h" - - -#define OUTBUFSIZ BUFSIZ -#define MEM_OUT -2 /* output to dynamically allocated memory */ -#define OUTPUT_ERR 01 /* error occurred on output */ - -static int doformat_wr(void *, const char *, int); - -struct output output = {NULL, NULL, NULL, OUTBUFSIZ, 1, 0}; -struct output errout = {NULL, NULL, NULL, 256, 2, 0}; -struct output memout = {NULL, NULL, NULL, 64, MEM_OUT, 0}; -struct output *out1 = &output; -struct output *out2 = &errout; - -void -outcslow(int c, struct output *file) -{ - outc(c, file); -} - -void -out1str(const char *p) -{ - outstr(p, out1); -} - -void -out1qstr(const char *p) -{ - outqstr(p, out1); -} - -void -out2str(const char *p) -{ - outstr(p, out2); -} - -void -out2qstr(const char *p) -{ - outqstr(p, out2); -} - -void -outstr(const char *p, struct output *file) -{ - outbin(p, strlen(p), file); -} - -static void -byteseq(int ch, struct output *file) -{ - char seq[4]; - - seq[0] = '\\'; - seq[1] = (ch >> 6 & 0x3) + '0'; - seq[2] = (ch >> 3 & 0x7) + '0'; - seq[3] = (ch & 0x7) + '0'; - outbin(seq, 4, file); -} - -static void -outdqstr(const char *p, struct output *file) -{ - const char *end; - mbstate_t mbs; - size_t clen; - wchar_t wc; - - memset(&mbs, '\0', sizeof(mbs)); - end = p + strlen(p); - outstr("$'", file); - while ((clen = mbrtowc(&wc, p, end - p + 1, &mbs)) != 0) { - if (clen == (size_t)-2) { - while (p < end) - byteseq(*p++, file); - break; - } - if (clen == (size_t)-1) { - memset(&mbs, '\0', sizeof(mbs)); - byteseq(*p++, file); - continue; - } - if (wc == L'\n') - outcslow('\n', file), p++; - else if (wc == L'\r') - outstr("\\r", file), p++; - else if (wc == L'\t') - outstr("\\t", file), p++; - else if (!iswprint(wc)) { - for (; clen > 0; clen--) - byteseq(*p++, file); - } else { - if (wc == L'\'' || wc == L'\\') - outcslow('\\', file); - outbin(p, clen, file); - p += clen; - } - } - outcslow('\'', file); -} - -/* Like outstr(), but quote for re-input into the shell. */ -void -outqstr(const char *p, struct output *file) -{ - int i; - - if (p[0] == '\0') { - outstr("''", file); - return; - } - for (i = 0; p[i] != '\0'; i++) { - if ((p[i] > '\0' && p[i] < ' ' && p[i] != '\n') || - (p[i] & 0x80) != 0 || p[i] == '\'') { - outdqstr(p, file); - return; - } - } - - if (p[strcspn(p, "|&;<>()$`\\\" \n*?[~#=")] == '\0' || - strcmp(p, "[") == 0) { - outstr(p, file); - return; - } - - outcslow('\'', file); - outstr(p, file); - outcslow('\'', file); -} - -void -outbin(const void *data, size_t len, struct output *file) -{ - const char *p; - - p = data; - while (len-- > 0) - outc(*p++, file); -} - -void -emptyoutbuf(struct output *dest) -{ - int offset, newsize; - - if (dest->buf == NULL) { - INTOFF; - dest->buf = ckmalloc(dest->bufsize); - dest->nextc = dest->buf; - dest->bufend = dest->buf + dest->bufsize; - INTON; - } else if (dest->fd == MEM_OUT) { - offset = dest->nextc - dest->buf; - newsize = dest->bufsize << 1; - INTOFF; - dest->buf = ckrealloc(dest->buf, newsize); - dest->bufsize = newsize; - dest->bufend = dest->buf + newsize; - dest->nextc = dest->buf + offset; - INTON; - } else { - flushout(dest); - } -} - - -void -flushall(void) -{ - flushout(&output); - flushout(&errout); -} - - -void -flushout(struct output *dest) -{ - - if (dest->buf == NULL || dest->nextc == dest->buf || dest->fd < 0) - return; - if (xwrite(dest->fd, dest->buf, dest->nextc - dest->buf) < 0) - dest->flags |= OUTPUT_ERR; - dest->nextc = dest->buf; -} - - -void -freestdout(void) -{ - output.nextc = output.buf; -} - - -int -outiserror(struct output *file) -{ - return (file->flags & OUTPUT_ERR); -} - - -void -outclearerror(struct output *file) -{ - file->flags &= ~OUTPUT_ERR; -} - - -void -outfmt(struct output *file, const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - doformat(file, fmt, ap); - va_end(ap); -} - - -void -out1fmt(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - doformat(out1, fmt, ap); - va_end(ap); -} - -void -out2fmt_flush(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - doformat(out2, fmt, ap); - va_end(ap); - flushout(out2); -} - -void -fmtstr(char *outbuf, int length, const char *fmt, ...) -{ - va_list ap; - - INTOFF; - va_start(ap, fmt); - vsnprintf(outbuf, length, fmt, ap); - va_end(ap); - INTON; -} - -static int -doformat_wr(void *cookie, const char *buf, int len) -{ - struct output *o; - - o = (struct output *)cookie; - outbin(buf, len, o); - - return (len); -} - -void -doformat(struct output *dest, const char *f, va_list ap) -{ - FILE *fp; - - if ((fp = fwopen(dest, doformat_wr)) != NULL) { - vfprintf(fp, f, ap); - fclose(fp); - } -} - -/* - * Version of write which resumes after a signal is caught. - */ - -int -xwrite(int fd, const char *buf, int nbytes) -{ - int ntry; - int i; - int n; - - n = nbytes; - ntry = 0; - for (;;) { - i = write(fd, buf, n); - if (i > 0) { - if ((n -= i) <= 0) - return nbytes; - buf += i; - ntry = 0; - } else if (i == 0) { - if (++ntry > 10) - return nbytes - n; - } else if (errno != EINTR) { - return -1; - } - } -} diff --git a/bin/1sh/output.h b/bin/1sh/output.h deleted file mode 100644 index 511c7078..00000000 --- a/bin/1sh/output.h +++ /dev/null @@ -1,85 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)output.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/output.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -#ifndef OUTPUT_INCL - -#include <stdarg.h> -#include <stddef.h> - -struct output { - char *nextc; - char *bufend; - char *buf; - int bufsize; - short fd; - short flags; -}; - -extern struct output output; /* to fd 1 */ -extern struct output errout; /* to fd 2 */ -extern struct output memout; -extern struct output *out1; /* &memout if backquote, otherwise &output */ -extern struct output *out2; /* &memout if backquote with 2>&1, otherwise - &errout */ - -void outcslow(int, struct output *); -void out1str(const char *); -void out1qstr(const char *); -void out2str(const char *); -void out2qstr(const char *); -void outstr(const char *, struct output *); -void outqstr(const char *, struct output *); -void outbin(const void *, size_t, struct output *); -void emptyoutbuf(struct output *); -void flushall(void); -void flushout(struct output *); -void freestdout(void); -int outiserror(struct output *); -void outclearerror(struct output *); -void outfmt(struct output *, const char *, ...) __printflike(2, 3); -void out1fmt(const char *, ...) __printflike(1, 2); -void out2fmt_flush(const char *, ...) __printflike(1, 2); -void fmtstr(char *, int, const char *, ...) __printflike(3, 4); -void doformat(struct output *, const char *, va_list) __printflike(2, 0); -int xwrite(int, const char *, int); - -#define outc(c, file) ((file)->nextc == (file)->bufend ? (emptyoutbuf(file), *(file)->nextc++ = (c)) : (*(file)->nextc++ = (c))) -#define out1c(c) outc(c, out1); -#define out2c(c) outcslow(c, out2); - -#define OUTPUT_INCL -#endif diff --git a/bin/1sh/parser.c b/bin/1sh/parser.c deleted file mode 100644 index a7b86aab..00000000 --- a/bin/1sh/parser.c +++ /dev/null @@ -1,2182 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)parser.c 8.7 (Berkeley) 5/16/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/parser.c 334008 2018-05-21 21:52:48Z jilles $"); - -#include <stdlib.h> -#include <unistd.h> -#include <stdio.h> - -#include "shell.h" -#include "parser.h" -#include "nodes.h" -#include "expand.h" /* defines rmescapes() */ -#include "syntax.h" -#include "options.h" -#include "input.h" -#include "output.h" -#include "var.h" -#include "error.h" -#include "memalloc.h" -#include "mystring.h" -#include "alias.h" -#include "show.h" -#include "eval.h" -#include "exec.h" /* to check for special builtins */ -#ifndef NO_HISTORY -#include "myhistedit.h" -#endif - -/* - * Shell command parser. - */ - -#define PROMPTLEN 128 - -/* values of checkkwd variable */ -#define CHKALIAS 0x1 -#define CHKKWD 0x2 -#define CHKNL 0x4 - -/* values returned by readtoken */ -#include "token.h" - - - -struct heredoc { - struct heredoc *next; /* next here document in list */ - union node *here; /* redirection node */ - char *eofmark; /* string indicating end of input */ - int striptabs; /* if set, strip leading tabs */ -}; - -struct parser_temp { - struct parser_temp *next; - void *data; -}; - - -static struct heredoc *heredoclist; /* list of here documents to read */ -static int doprompt; /* if set, prompt the user */ -static int needprompt; /* true if interactive and at start of line */ -static int lasttoken; /* last token read */ -static int tokpushback; /* last token pushed back */ -static char *wordtext; /* text of last word returned by readtoken */ -static int checkkwd; -static struct nodelist *backquotelist; -static union node *redirnode; -static struct heredoc *heredoc; -static int quoteflag; /* set if (part of) last token was quoted */ -static int startlinno; /* line # where last token started */ -static int funclinno; /* line # where the current function started */ -static struct parser_temp *parser_temp; - -#define NOEOFMARK ((const char *)&heredoclist) - - -static union node *list(int); -static union node *andor(void); -static union node *pipeline(void); -static union node *command(void); -static union node *simplecmd(union node **, union node *); -static union node *makename(void); -static union node *makebinary(int type, union node *n1, union node *n2); -static void parsefname(void); -static void parseheredoc(void); -static int peektoken(void); -static int readtoken(void); -static int xxreadtoken(void); -static int readtoken1(int, const char *, const char *, int); -static int noexpand(char *); -static void consumetoken(int); -static void synexpect(int) __dead2; -static void synerror(const char *) __dead2; -static void setprompt(int); -static char *expandprompt(const char *); -static int pgetc_linecont(void); - - -static void * -parser_temp_alloc(size_t len) -{ - struct parser_temp *t; - - INTOFF; - t = ckmalloc(sizeof(*t)); - t->data = NULL; - t->next = parser_temp; - parser_temp = t; - t->data = ckmalloc(len); - INTON; - return t->data; -} - - -static void * -parser_temp_realloc(void *ptr, size_t len) -{ - struct parser_temp *t; - - INTOFF; - t = parser_temp; - if (ptr != t->data) - error("bug: parser_temp_realloc misused"); - t->data = ckrealloc(t->data, len); - INTON; - return t->data; -} - - -static void -parser_temp_free_upto(void *ptr) -{ - struct parser_temp *t; - int done = 0; - - INTOFF; - while (parser_temp != NULL && !done) { - t = parser_temp; - parser_temp = t->next; - done = t->data == ptr; - ckfree(t->data); - ckfree(t); - } - INTON; - if (!done) - error("bug: parser_temp_free_upto misused"); -} - - -static void -parser_temp_free_all(void) -{ - struct parser_temp *t; - - INTOFF; - while (parser_temp != NULL) { - t = parser_temp; - parser_temp = t->next; - ckfree(t->data); - ckfree(t); - } - INTON; -} - - -/* - * Read and parse a command. Returns NEOF on end of file. (NULL is a - * valid parse tree indicating a blank line.) - */ - -union node * -parsecmd(int interact) -{ - int t; - - /* This assumes the parser is not re-entered, - * which could happen if we add command substitution on PS1/PS2. - */ - parser_temp_free_all(); - heredoclist = NULL; - - tokpushback = 0; - checkkwd = 0; - doprompt = interact; - if (doprompt) - setprompt(1); - else - setprompt(0); - needprompt = 0; - t = readtoken(); - if (t == TEOF) - return NEOF; - if (t == TNL) - return NULL; - tokpushback++; - return list(1); -} - - -/* - * Read and parse words for wordexp. - * Returns a list of NARG nodes; NULL if there are no words. - */ -union node * -parsewordexp(void) -{ - union node *n, *first = NULL, **pnext; - int t; - - /* This assumes the parser is not re-entered, - * which could happen if we add command substitution on PS1/PS2. - */ - parser_temp_free_all(); - heredoclist = NULL; - - tokpushback = 0; - checkkwd = 0; - doprompt = 0; - setprompt(0); - needprompt = 0; - pnext = &first; - while ((t = readtoken()) != TEOF) { - if (t != TWORD) - synexpect(TWORD); - n = makename(); - *pnext = n; - pnext = &n->narg.next; - } - return first; -} - - -static union node * -list(int nlflag) -{ - union node *ntop, *n1, *n2, *n3; - int tok; - - checkkwd = CHKNL | CHKKWD | CHKALIAS; - if (!nlflag && tokendlist[peektoken()]) - return NULL; - ntop = n1 = NULL; - for (;;) { - n2 = andor(); - tok = readtoken(); - if (tok == TBACKGND) { - if (n2 != NULL && n2->type == NPIPE) { - n2->npipe.backgnd = 1; - } else if (n2 != NULL && n2->type == NREDIR) { - n2->type = NBACKGND; - } else { - n3 = (union node *)stalloc(sizeof (struct nredir)); - n3->type = NBACKGND; - n3->nredir.n = n2; - n3->nredir.redirect = NULL; - n2 = n3; - } - } - if (ntop == NULL) - ntop = n2; - else if (n1 == NULL) { - n1 = makebinary(NSEMI, ntop, n2); - ntop = n1; - } - else { - n3 = makebinary(NSEMI, n1->nbinary.ch2, n2); - n1->nbinary.ch2 = n3; - n1 = n3; - } - switch (tok) { - case TBACKGND: - case TSEMI: - tok = readtoken(); - /* FALLTHROUGH */ - case TNL: - if (tok == TNL) { - parseheredoc(); - if (nlflag) - return ntop; - } else if (tok == TEOF && nlflag) { - parseheredoc(); - return ntop; - } else { - tokpushback++; - } - checkkwd = CHKNL | CHKKWD | CHKALIAS; - if (!nlflag && tokendlist[peektoken()]) - return ntop; - break; - case TEOF: - if (heredoclist) - parseheredoc(); - else - pungetc(); /* push back EOF on input */ - return ntop; - default: - if (nlflag) - synexpect(-1); - tokpushback++; - return ntop; - } - } -} - - - -static union node * -andor(void) -{ - union node *n; - int t; - - n = pipeline(); - for (;;) { - if ((t = readtoken()) == TAND) { - t = NAND; - } else if (t == TOR) { - t = NOR; - } else { - tokpushback++; - return n; - } - n = makebinary(t, n, pipeline()); - } -} - - - -static union node * -pipeline(void) -{ - union node *n1, *n2, *pipenode; - struct nodelist *lp, *prev; - int negate, t; - - negate = 0; - checkkwd = CHKNL | CHKKWD | CHKALIAS; - TRACE(("pipeline: entered\n")); - while (readtoken() == TNOT) - negate = !negate; - tokpushback++; - n1 = command(); - if (readtoken() == TPIPE) { - pipenode = (union node *)stalloc(sizeof (struct npipe)); - pipenode->type = NPIPE; - pipenode->npipe.backgnd = 0; - lp = (struct nodelist *)stalloc(sizeof (struct nodelist)); - pipenode->npipe.cmdlist = lp; - lp->n = n1; - do { - prev = lp; - lp = (struct nodelist *)stalloc(sizeof (struct nodelist)); - checkkwd = CHKNL | CHKKWD | CHKALIAS; - t = readtoken(); - tokpushback++; - if (t == TNOT) - lp->n = pipeline(); - else - lp->n = command(); - prev->next = lp; - } while (readtoken() == TPIPE); - lp->next = NULL; - n1 = pipenode; - } - tokpushback++; - if (negate) { - n2 = (union node *)stalloc(sizeof (struct nnot)); - n2->type = NNOT; - n2->nnot.com = n1; - return n2; - } else - return n1; -} - - - -static union node * -command(void) -{ - union node *n1, *n2; - union node *ap, **app; - union node *cp, **cpp; - union node *redir, **rpp; - int t; - int is_subshell; - - checkkwd = CHKNL | CHKKWD | CHKALIAS; - is_subshell = 0; - redir = NULL; - n1 = NULL; - rpp = &redir; - - /* Check for redirection which may precede command */ - while (readtoken() == TREDIR) { - *rpp = n2 = redirnode; - rpp = &n2->nfile.next; - parsefname(); - } - tokpushback++; - - switch (readtoken()) { - case TIF: - n1 = (union node *)stalloc(sizeof (struct nif)); - n1->type = NIF; - if ((n1->nif.test = list(0)) == NULL) - synexpect(-1); - consumetoken(TTHEN); - n1->nif.ifpart = list(0); - n2 = n1; - while (readtoken() == TELIF) { - n2->nif.elsepart = (union node *)stalloc(sizeof (struct nif)); - n2 = n2->nif.elsepart; - n2->type = NIF; - if ((n2->nif.test = list(0)) == NULL) - synexpect(-1); - consumetoken(TTHEN); - n2->nif.ifpart = list(0); - } - if (lasttoken == TELSE) - n2->nif.elsepart = list(0); - else { - n2->nif.elsepart = NULL; - tokpushback++; - } - consumetoken(TFI); - checkkwd = CHKKWD | CHKALIAS; - break; - case TWHILE: - case TUNTIL: - t = lasttoken; - if ((n1 = list(0)) == NULL) - synexpect(-1); - consumetoken(TDO); - n1 = makebinary((t == TWHILE)? NWHILE : NUNTIL, n1, list(0)); - consumetoken(TDONE); - checkkwd = CHKKWD | CHKALIAS; - break; - case TFOR: - if (readtoken() != TWORD || quoteflag || ! goodname(wordtext)) - synerror("Bad for loop variable"); - n1 = (union node *)stalloc(sizeof (struct nfor)); - n1->type = NFOR; - n1->nfor.var = wordtext; - while (readtoken() == TNL) - ; - if (lasttoken == TWORD && ! quoteflag && equal(wordtext, "in")) { - app = ≈ - while (readtoken() == TWORD) { - n2 = makename(); - *app = n2; - app = &n2->narg.next; - } - *app = NULL; - n1->nfor.args = ap; - if (lasttoken != TNL && lasttoken != TSEMI) - synexpect(-1); - } else { - static char argvars[5] = { - CTLVAR, VSNORMAL|VSQUOTE, '@', '=', '\0' - }; - n2 = (union node *)stalloc(sizeof (struct narg)); - n2->type = NARG; - n2->narg.text = argvars; - n2->narg.backquote = NULL; - n2->narg.next = NULL; - n1->nfor.args = n2; - /* - * Newline or semicolon here is optional (but note - * that the original Bourne shell only allowed NL). - */ - if (lasttoken != TNL && lasttoken != TSEMI) - tokpushback++; - } - checkkwd = CHKNL | CHKKWD | CHKALIAS; - if ((t = readtoken()) == TDO) - t = TDONE; - else if (t == TBEGIN) - t = TEND; - else - synexpect(-1); - n1->nfor.body = list(0); - consumetoken(t); - checkkwd = CHKKWD | CHKALIAS; - break; - case TCASE: - n1 = (union node *)stalloc(sizeof (struct ncase)); - n1->type = NCASE; - consumetoken(TWORD); - n1->ncase.expr = makename(); - while (readtoken() == TNL); - if (lasttoken != TWORD || ! equal(wordtext, "in")) - synerror("expecting \"in\""); - cpp = &n1->ncase.cases; - checkkwd = CHKNL | CHKKWD, readtoken(); - while (lasttoken != TESAC) { - *cpp = cp = (union node *)stalloc(sizeof (struct nclist)); - cp->type = NCLIST; - app = &cp->nclist.pattern; - if (lasttoken == TLP) - readtoken(); - for (;;) { - *app = ap = makename(); - checkkwd = CHKNL | CHKKWD; - if (readtoken() != TPIPE) - break; - app = &ap->narg.next; - readtoken(); - } - ap->narg.next = NULL; - if (lasttoken != TRP) - synexpect(TRP); - cp->nclist.body = list(0); - - checkkwd = CHKNL | CHKKWD | CHKALIAS; - if ((t = readtoken()) != TESAC) { - if (t == TENDCASE) - ; - else if (t == TFALLTHRU) - cp->type = NCLISTFALLTHRU; - else - synexpect(TENDCASE); - checkkwd = CHKNL | CHKKWD, readtoken(); - } - cpp = &cp->nclist.next; - } - *cpp = NULL; - checkkwd = CHKKWD | CHKALIAS; - break; - case TLP: - n1 = (union node *)stalloc(sizeof (struct nredir)); - n1->type = NSUBSHELL; - n1->nredir.n = list(0); - n1->nredir.redirect = NULL; - consumetoken(TRP); - checkkwd = CHKKWD | CHKALIAS; - is_subshell = 1; - break; - case TBEGIN: - n1 = list(0); - consumetoken(TEND); - checkkwd = CHKKWD | CHKALIAS; - break; - /* A simple command must have at least one redirection or word. */ - case TBACKGND: - case TSEMI: - case TAND: - case TOR: - case TPIPE: - case TENDCASE: - case TFALLTHRU: - case TEOF: - case TNL: - case TRP: - if (!redir) - synexpect(-1); - case TWORD: - tokpushback++; - n1 = simplecmd(rpp, redir); - return n1; - default: - synexpect(-1); - } - - /* Now check for redirection which may follow command */ - while (readtoken() == TREDIR) { - *rpp = n2 = redirnode; - rpp = &n2->nfile.next; - parsefname(); - } - tokpushback++; - *rpp = NULL; - if (redir) { - if (!is_subshell) { - n2 = (union node *)stalloc(sizeof (struct nredir)); - n2->type = NREDIR; - n2->nredir.n = n1; - n1 = n2; - } - n1->nredir.redirect = redir; - } - - return n1; -} - - -static union node * -simplecmd(union node **rpp, union node *redir) -{ - union node *args, **app; - union node **orig_rpp = rpp; - union node *n = NULL; - int special; - int savecheckkwd; - - /* If we don't have any redirections already, then we must reset */ - /* rpp to be the address of the local redir variable. */ - if (redir == NULL) - rpp = &redir; - - args = NULL; - app = &args; - /* - * We save the incoming value, because we need this for shell - * functions. There can not be a redirect or an argument between - * the function name and the open parenthesis. - */ - orig_rpp = rpp; - - savecheckkwd = CHKALIAS; - - for (;;) { - checkkwd = savecheckkwd; - if (readtoken() == TWORD) { - n = makename(); - *app = n; - app = &n->narg.next; - if (savecheckkwd != 0 && !isassignment(wordtext)) - savecheckkwd = 0; - } else if (lasttoken == TREDIR) { - *rpp = n = redirnode; - rpp = &n->nfile.next; - parsefname(); /* read name of redirection file */ - } else if (lasttoken == TLP && app == &args->narg.next - && rpp == orig_rpp) { - /* We have a function */ - consumetoken(TRP); - funclinno = plinno; - /* - * - Require plain text. - * - Functions with '/' cannot be called. - * - Reject name=(). - * - Reject ksh extended glob patterns. - */ - if (!noexpand(n->narg.text) || quoteflag || - strchr(n->narg.text, '/') || - strchr("!%*+-=?@}~", - n->narg.text[strlen(n->narg.text) - 1])) - synerror("Bad function name"); - rmescapes(n->narg.text); - if (find_builtin(n->narg.text, &special) >= 0 && - special) - synerror("Cannot override a special builtin with a function"); - n->type = NDEFUN; - n->narg.next = command(); - funclinno = 0; - return n; - } else { - tokpushback++; - break; - } - } - *app = NULL; - *rpp = NULL; - n = (union node *)stalloc(sizeof (struct ncmd)); - n->type = NCMD; - n->ncmd.args = args; - n->ncmd.redirect = redir; - return n; -} - -static union node * -makename(void) -{ - union node *n; - - n = (union node *)stalloc(sizeof (struct narg)); - n->type = NARG; - n->narg.next = NULL; - n->narg.text = wordtext; - n->narg.backquote = backquotelist; - return n; -} - -static union node * -makebinary(int type, union node *n1, union node *n2) -{ - union node *n; - - n = (union node *)stalloc(sizeof (struct nbinary)); - n->type = type; - n->nbinary.ch1 = n1; - n->nbinary.ch2 = n2; - return (n); -} - -void -forcealias(void) -{ - checkkwd |= CHKALIAS; -} - -void -fixredir(union node *n, const char *text, int err) -{ - TRACE(("Fix redir %s %d\n", text, err)); - if (!err) - n->ndup.vname = NULL; - - if (is_digit(text[0]) && text[1] == '\0') - n->ndup.dupfd = digit_val(text[0]); - else if (text[0] == '-' && text[1] == '\0') - n->ndup.dupfd = -1; - else { - - if (err) - synerror("Bad fd number"); - else - n->ndup.vname = makename(); - } -} - - -static void -parsefname(void) -{ - union node *n = redirnode; - - consumetoken(TWORD); - if (n->type == NHERE) { - struct heredoc *here = heredoc; - struct heredoc *p; - - if (quoteflag == 0) - n->type = NXHERE; - TRACE(("Here document %d\n", n->type)); - if (here->striptabs) { - while (*wordtext == '\t') - wordtext++; - } - if (! noexpand(wordtext)) - synerror("Illegal eof marker for << redirection"); - rmescapes(wordtext); - here->eofmark = wordtext; - here->next = NULL; - if (heredoclist == NULL) - heredoclist = here; - else { - for (p = heredoclist ; p->next ; p = p->next); - p->next = here; - } - } else if (n->type == NTOFD || n->type == NFROMFD) { - fixredir(n, wordtext, 0); - } else { - n->nfile.fname = makename(); - } -} - - -/* - * Input any here documents. - */ - -static void -parseheredoc(void) -{ - struct heredoc *here; - union node *n; - - while (heredoclist) { - here = heredoclist; - heredoclist = here->next; - if (needprompt) { - setprompt(2); - needprompt = 0; - } - readtoken1(pgetc(), here->here->type == NHERE? SQSYNTAX : DQSYNTAX, - here->eofmark, here->striptabs); - n = makename(); - here->here->nhere.doc = n; - } -} - -static int -peektoken(void) -{ - int t; - - t = readtoken(); - tokpushback++; - return (t); -} - -static int -readtoken(void) -{ - int t; - struct alias *ap; -#ifdef DEBUG - int alreadyseen = tokpushback; -#endif - - top: - t = xxreadtoken(); - - /* - * eat newlines - */ - if (checkkwd & CHKNL) { - while (t == TNL) { - parseheredoc(); - t = xxreadtoken(); - } - } - - /* - * check for keywords and aliases - */ - if (t == TWORD && !quoteflag) - { - const char * const *pp; - - if (checkkwd & CHKKWD) - for (pp = parsekwd; *pp; pp++) { - if (**pp == *wordtext && equal(*pp, wordtext)) - { - lasttoken = t = pp - parsekwd + KWDOFFSET; - TRACE(("keyword %s recognized\n", tokname[t])); - goto out; - } - } - if (checkkwd & CHKALIAS && - (ap = lookupalias(wordtext, 1)) != NULL) { - pushstring(ap->val, strlen(ap->val), ap); - goto top; - } - } -out: - if (t != TNOT) - checkkwd = 0; - -#ifdef DEBUG - if (!alreadyseen) - TRACE(("token %s %s\n", tokname[t], t == TWORD ? wordtext : "")); - else - TRACE(("reread token %s %s\n", tokname[t], t == TWORD ? wordtext : "")); -#endif - return (t); -} - - -/* - * Read the next input token. - * If the token is a word, we set backquotelist to the list of cmds in - * backquotes. We set quoteflag to true if any part of the word was - * quoted. - * If the token is TREDIR, then we set redirnode to a structure containing - * the redirection. - * In all cases, the variable startlinno is set to the number of the line - * on which the token starts. - * - * [Change comment: here documents and internal procedures] - * [Readtoken shouldn't have any arguments. Perhaps we should make the - * word parsing code into a separate routine. In this case, readtoken - * doesn't need to have any internal procedures, but parseword does. - * We could also make parseoperator in essence the main routine, and - * have parseword (readtoken1?) handle both words and redirection.] - */ - -#define RETURN(token) return lasttoken = token - -static int -xxreadtoken(void) -{ - int c; - - if (tokpushback) { - tokpushback = 0; - return lasttoken; - } - if (needprompt) { - setprompt(2); - needprompt = 0; - } - startlinno = plinno; - for (;;) { /* until token or start of word found */ - c = pgetc_macro(); - switch (c) { - case ' ': case '\t': - continue; - case '#': - while ((c = pgetc()) != '\n' && c != PEOF); - pungetc(); - continue; - case '\\': - if (pgetc() == '\n') { - startlinno = ++plinno; - if (doprompt) - setprompt(2); - else - setprompt(0); - continue; - } - pungetc(); - /* FALLTHROUGH */ - default: - return readtoken1(c, BASESYNTAX, (char *)NULL, 0); - case '\n': - plinno++; - needprompt = doprompt; - RETURN(TNL); - case PEOF: - RETURN(TEOF); - case '&': - if (pgetc_linecont() == '&') - RETURN(TAND); - pungetc(); - RETURN(TBACKGND); - case '|': - if (pgetc_linecont() == '|') - RETURN(TOR); - pungetc(); - RETURN(TPIPE); - case ';': - c = pgetc_linecont(); - if (c == ';') - RETURN(TENDCASE); - else if (c == '&') - RETURN(TFALLTHRU); - pungetc(); - RETURN(TSEMI); - case '(': - RETURN(TLP); - case ')': - RETURN(TRP); - } - } -#undef RETURN -} - - -#define MAXNEST_static 8 -struct tokenstate -{ - const char *syntax; /* *SYNTAX */ - int parenlevel; /* levels of parentheses in arithmetic */ - enum tokenstate_category - { - TSTATE_TOP, - TSTATE_VAR_OLD, /* ${var+-=?}, inherits dquotes */ - TSTATE_VAR_NEW, /* other ${var...}, own dquote state */ - TSTATE_ARITH - } category; -}; - - -/* - * Check to see whether we are at the end of the here document. When this - * is called, c is set to the first character of the next input line. If - * we are at the end of the here document, this routine sets the c to PEOF. - * The new value of c is returned. - */ - -static int -checkend(int c, const char *eofmark, int striptabs) -{ - if (striptabs) { - while (c == '\t') - c = pgetc(); - } - if (c == *eofmark) { - int c2; - const char *q; - - for (q = eofmark + 1; c2 = pgetc(), *q != '\0' && c2 == *q; q++) - ; - if ((c2 == PEOF || c2 == '\n') && *q == '\0') { - c = PEOF; - if (c2 == '\n') { - plinno++; - needprompt = doprompt; - } - } else { - pungetc(); - pushstring(eofmark + 1, q - (eofmark + 1), NULL); - } - } else if (c == '\n' && *eofmark == '\0') { - c = PEOF; - plinno++; - needprompt = doprompt; - } - return (c); -} - - -/* - * Parse a redirection operator. The variable "out" points to a string - * specifying the fd to be redirected. The variable "c" contains the - * first character of the redirection operator. - */ - -static void -parseredir(char *out, int c) -{ - char fd = *out; - union node *np; - - np = (union node *)stalloc(sizeof (struct nfile)); - if (c == '>') { - np->nfile.fd = 1; - c = pgetc_linecont(); - if (c == '>') - np->type = NAPPEND; - else if (c == '&') - np->type = NTOFD; - else if (c == '|') - np->type = NCLOBBER; - else { - np->type = NTO; - pungetc(); - } - } else { /* c == '<' */ - np->nfile.fd = 0; - c = pgetc_linecont(); - if (c == '<') { - if (sizeof (struct nfile) != sizeof (struct nhere)) { - np = (union node *)stalloc(sizeof (struct nhere)); - np->nfile.fd = 0; - } - np->type = NHERE; - heredoc = (struct heredoc *)stalloc(sizeof (struct heredoc)); - heredoc->here = np; - if ((c = pgetc_linecont()) == '-') { - heredoc->striptabs = 1; - } else { - heredoc->striptabs = 0; - pungetc(); - } - } else if (c == '&') - np->type = NFROMFD; - else if (c == '>') - np->type = NFROMTO; - else { - np->type = NFROM; - pungetc(); - } - } - if (fd != '\0') - np->nfile.fd = digit_val(fd); - redirnode = np; -} - -/* - * Called to parse command substitutions. - */ - -static char * -parsebackq(char *out, struct nodelist **pbqlist, - int oldstyle, int dblquote, int quoted) -{ - struct nodelist **nlpp; - union node *n; - char *volatile str; - struct jmploc jmploc; - struct jmploc *const savehandler = handler; - size_t savelen; - int saveprompt; - const int bq_startlinno = plinno; - char *volatile ostr = NULL; - struct parsefile *const savetopfile = getcurrentfile(); - struct heredoc *const saveheredoclist = heredoclist; - struct heredoc *here; - - str = NULL; - if (setjmp(jmploc.loc)) { - popfilesupto(savetopfile); - if (str) - ckfree(str); - if (ostr) - ckfree(ostr); - heredoclist = saveheredoclist; - handler = savehandler; - if (exception == EXERROR) { - startlinno = bq_startlinno; - synerror("Error in command substitution"); - } - longjmp(handler->loc, 1); - } - INTOFF; - savelen = out - stackblock(); - if (savelen > 0) { - str = ckmalloc(savelen); - memcpy(str, stackblock(), savelen); - } - handler = &jmploc; - heredoclist = NULL; - INTON; - if (oldstyle) { - /* We must read until the closing backquote, giving special - treatment to some slashes, and then push the string and - reread it as input, interpreting it normally. */ - char *oout; - int c; - int olen; - - - STARTSTACKSTR(oout); - for (;;) { - if (needprompt) { - setprompt(2); - needprompt = 0; - } - CHECKSTRSPACE(2, oout); - c = pgetc_linecont(); - if (c == '`') - break; - switch (c) { - case '\\': - c = pgetc(); - if (c != '\\' && c != '`' && c != '$' - && (!dblquote || c != '"')) - USTPUTC('\\', oout); - break; - - case '\n': - plinno++; - needprompt = doprompt; - break; - - case PEOF: - startlinno = plinno; - synerror("EOF in backquote substitution"); - break; - - default: - break; - } - USTPUTC(c, oout); - } - USTPUTC('\0', oout); - olen = oout - stackblock(); - INTOFF; - ostr = ckmalloc(olen); - memcpy(ostr, stackblock(), olen); - setinputstring(ostr, 1); - INTON; - } - nlpp = pbqlist; - while (*nlpp) - nlpp = &(*nlpp)->next; - *nlpp = (struct nodelist *)stalloc(sizeof (struct nodelist)); - (*nlpp)->next = NULL; - - if (oldstyle) { - saveprompt = doprompt; - doprompt = 0; - } - - n = list(0); - - if (oldstyle) { - if (peektoken() != TEOF) - synexpect(-1); - doprompt = saveprompt; - } else - consumetoken(TRP); - - (*nlpp)->n = n; - if (oldstyle) { - /* - * Start reading from old file again, ignoring any pushed back - * tokens left from the backquote parsing - */ - popfile(); - tokpushback = 0; - } - STARTSTACKSTR(out); - CHECKSTRSPACE(savelen + 1, out); - INTOFF; - if (str) { - memcpy(out, str, savelen); - STADJUST(savelen, out); - ckfree(str); - str = NULL; - } - if (ostr) { - ckfree(ostr); - ostr = NULL; - } - here = saveheredoclist; - if (here != NULL) { - while (here->next != NULL) - here = here->next; - here->next = heredoclist; - heredoclist = saveheredoclist; - } - handler = savehandler; - INTON; - if (quoted) - USTPUTC(CTLBACKQ | CTLQUOTE, out); - else - USTPUTC(CTLBACKQ, out); - return out; -} - - -/* - * Called to parse a backslash escape sequence inside $'...'. - * The backslash has already been read. - */ -static char * -readcstyleesc(char *out) -{ - int c, vc, i, n; - unsigned int v; - - c = pgetc(); - switch (c) { - case '\0': - synerror("Unterminated quoted string"); - case '\n': - plinno++; - if (doprompt) - setprompt(2); - else - setprompt(0); - return out; - case '\\': - case '\'': - case '"': - v = c; - break; - case 'a': v = '\a'; break; - case 'b': v = '\b'; break; - case 'e': v = '\033'; break; - case 'f': v = '\f'; break; - case 'n': v = '\n'; break; - case 'r': v = '\r'; break; - case 't': v = '\t'; break; - case 'v': v = '\v'; break; - case 'x': - v = 0; - for (;;) { - c = pgetc(); - if (c >= '0' && c <= '9') - v = (v << 4) + c - '0'; - else if (c >= 'A' && c <= 'F') - v = (v << 4) + c - 'A' + 10; - else if (c >= 'a' && c <= 'f') - v = (v << 4) + c - 'a' + 10; - else - break; - } - pungetc(); - break; - case '0': case '1': case '2': case '3': - case '4': case '5': case '6': case '7': - v = c - '0'; - c = pgetc(); - if (c >= '0' && c <= '7') { - v <<= 3; - v += c - '0'; - c = pgetc(); - if (c >= '0' && c <= '7') { - v <<= 3; - v += c - '0'; - } else - pungetc(); - } else - pungetc(); - break; - case 'c': - c = pgetc(); - if (c < 0x3f || c > 0x7a || c == 0x60) - synerror("Bad escape sequence"); - if (c == '\\' && pgetc() != '\\') - synerror("Bad escape sequence"); - if (c == '?') - v = 127; - else - v = c & 0x1f; - break; - case 'u': - case 'U': - n = c == 'U' ? 8 : 4; - v = 0; - for (i = 0; i < n; i++) { - c = pgetc(); - if (c >= '0' && c <= '9') - v = (v << 4) + c - '0'; - else if (c >= 'A' && c <= 'F') - v = (v << 4) + c - 'A' + 10; - else if (c >= 'a' && c <= 'f') - v = (v << 4) + c - 'a' + 10; - else - synerror("Bad escape sequence"); - } - if (v == 0 || (v >= 0xd800 && v <= 0xdfff)) - synerror("Bad escape sequence"); - /* We really need iconv here. */ - if (initial_localeisutf8 && v > 127) { - CHECKSTRSPACE(4, out); - /* - * We cannot use wctomb() as the locale may have - * changed. - */ - if (v <= 0x7ff) { - USTPUTC(0xc0 | v >> 6, out); - USTPUTC(0x80 | (v & 0x3f), out); - return out; - } else if (v <= 0xffff) { - USTPUTC(0xe0 | v >> 12, out); - USTPUTC(0x80 | ((v >> 6) & 0x3f), out); - USTPUTC(0x80 | (v & 0x3f), out); - return out; - } else if (v <= 0x10ffff) { - USTPUTC(0xf0 | v >> 18, out); - USTPUTC(0x80 | ((v >> 12) & 0x3f), out); - USTPUTC(0x80 | ((v >> 6) & 0x3f), out); - USTPUTC(0x80 | (v & 0x3f), out); - return out; - } - } - if (v > 127) - v = '?'; - break; - default: - synerror("Bad escape sequence"); - } - vc = (char)v; - /* - * We can't handle NUL bytes. - * POSIX says we should skip till the closing quote. - */ - if (vc == '\0') { - while ((c = pgetc()) != '\'') { - if (c == '\\') - c = pgetc(); - if (c == PEOF) - synerror("Unterminated quoted string"); - if (c == '\n') { - plinno++; - if (doprompt) - setprompt(2); - else - setprompt(0); - } - } - pungetc(); - return out; - } - if (SQSYNTAX[vc] == CCTL) - USTPUTC(CTLESC, out); - USTPUTC(vc, out); - return out; -} - - -/* - * If eofmark is NULL, read a word or a redirection symbol. If eofmark - * is not NULL, read a here document. In the latter case, eofmark is the - * word which marks the end of the document and striptabs is true if - * leading tabs should be stripped from the document. The argument firstc - * is the first character of the input token or document. - * - * Because C does not have internal subroutines, I have simulated them - * using goto's to implement the subroutine linkage. The following macros - * will run code that appears at the end of readtoken1. - */ - -#define PARSESUB() {goto parsesub; parsesub_return:;} -#define PARSEARITH() {goto parsearith; parsearith_return:;} - -static int -readtoken1(int firstc, char const *initialsyntax, const char *eofmark, - int striptabs) -{ - int c = firstc; - char *out; - int len; - struct nodelist *bqlist; - int quotef; - int newvarnest; - int level; - int synentry; - struct tokenstate state_static[MAXNEST_static]; - int maxnest = MAXNEST_static; - struct tokenstate *state = state_static; - int sqiscstyle = 0; - - startlinno = plinno; - quotef = 0; - bqlist = NULL; - newvarnest = 0; - level = 0; - state[level].syntax = initialsyntax; - state[level].parenlevel = 0; - state[level].category = TSTATE_TOP; - - STARTSTACKSTR(out); - loop: { /* for each line, until end of word */ - if (eofmark && eofmark != NOEOFMARK) - /* set c to PEOF if at end of here document */ - c = checkend(c, eofmark, striptabs); - for (;;) { /* until end of line or end of word */ - CHECKSTRSPACE(4, out); /* permit 4 calls to USTPUTC */ - - synentry = state[level].syntax[c]; - - switch(synentry) { - case CNL: /* '\n' */ - if (level == 0) - goto endword; /* exit outer loop */ - /* FALLTHROUGH */ - case CQNL: - USTPUTC(c, out); - plinno++; - if (doprompt) - setprompt(2); - else - setprompt(0); - c = pgetc(); - goto loop; /* continue outer loop */ - case CSBACK: - if (sqiscstyle) { - out = readcstyleesc(out); - break; - } - /* FALLTHROUGH */ - case CWORD: - USTPUTC(c, out); - break; - case CCTL: - if (eofmark == NULL || initialsyntax != SQSYNTAX) - USTPUTC(CTLESC, out); - USTPUTC(c, out); - break; - case CBACK: /* backslash */ - c = pgetc(); - if (c == PEOF) { - USTPUTC('\\', out); - pungetc(); - } else if (c == '\n') { - plinno++; - if (doprompt) - setprompt(2); - else - setprompt(0); - } else { - if (state[level].syntax == DQSYNTAX && - c != '\\' && c != '`' && c != '$' && - (c != '"' || (eofmark != NULL && - newvarnest == 0)) && - (c != '}' || state[level].category != TSTATE_VAR_OLD)) - USTPUTC('\\', out); - if ((eofmark == NULL || - newvarnest > 0) && - state[level].syntax == BASESYNTAX) - USTPUTC(CTLQUOTEMARK, out); - if (SQSYNTAX[c] == CCTL) - USTPUTC(CTLESC, out); - USTPUTC(c, out); - if ((eofmark == NULL || - newvarnest > 0) && - state[level].syntax == BASESYNTAX && - state[level].category == TSTATE_VAR_OLD) - USTPUTC(CTLQUOTEEND, out); - quotef++; - } - break; - case CSQUOTE: - USTPUTC(CTLQUOTEMARK, out); - state[level].syntax = SQSYNTAX; - sqiscstyle = 0; - break; - case CDQUOTE: - USTPUTC(CTLQUOTEMARK, out); - state[level].syntax = DQSYNTAX; - break; - case CENDQUOTE: - if (eofmark != NULL && newvarnest == 0) - USTPUTC(c, out); - else { - if (state[level].category == TSTATE_VAR_OLD) - USTPUTC(CTLQUOTEEND, out); - state[level].syntax = BASESYNTAX; - quotef++; - } - break; - case CVAR: /* '$' */ - PARSESUB(); /* parse substitution */ - break; - case CENDVAR: /* '}' */ - if (level > 0 && - ((state[level].category == TSTATE_VAR_OLD && - state[level].syntax == - state[level - 1].syntax) || - (state[level].category == TSTATE_VAR_NEW && - state[level].syntax == BASESYNTAX))) { - if (state[level].category == TSTATE_VAR_NEW) - newvarnest--; - level--; - USTPUTC(CTLENDVAR, out); - } else { - USTPUTC(c, out); - } - break; - case CLP: /* '(' in arithmetic */ - state[level].parenlevel++; - USTPUTC(c, out); - break; - case CRP: /* ')' in arithmetic */ - if (state[level].parenlevel > 0) { - USTPUTC(c, out); - --state[level].parenlevel; - } else { - if (pgetc_linecont() == ')') { - if (level > 0 && - state[level].category == TSTATE_ARITH) { - level--; - USTPUTC(CTLENDARI, out); - } else - USTPUTC(')', out); - } else { - /* - * unbalanced parens - * (don't 2nd guess - no error) - */ - pungetc(); - USTPUTC(')', out); - } - } - break; - case CBQUOTE: /* '`' */ - out = parsebackq(out, &bqlist, 1, - state[level].syntax == DQSYNTAX && - (eofmark == NULL || newvarnest > 0), - state[level].syntax == DQSYNTAX || state[level].syntax == ARISYNTAX); - break; - case CEOF: - goto endword; /* exit outer loop */ - case CIGN: - break; - default: - if (level == 0) - goto endword; /* exit outer loop */ - USTPUTC(c, out); - } - c = pgetc_macro(); - } - } -endword: - if (state[level].syntax == ARISYNTAX) - synerror("Missing '))'"); - if (state[level].syntax != BASESYNTAX && eofmark == NULL) - synerror("Unterminated quoted string"); - if (state[level].category == TSTATE_VAR_OLD || - state[level].category == TSTATE_VAR_NEW) { - startlinno = plinno; - synerror("Missing '}'"); - } - if (state != state_static) - parser_temp_free_upto(state); - USTPUTC('\0', out); - len = out - stackblock(); - out = stackblock(); - if (eofmark == NULL) { - if ((c == '>' || c == '<') - && quotef == 0 - && len <= 2 - && (*out == '\0' || is_digit(*out))) { - parseredir(out, c); - return lasttoken = TREDIR; - } else { - pungetc(); - } - } - quoteflag = quotef; - backquotelist = bqlist; - grabstackblock(len); - wordtext = out; - return lasttoken = TWORD; -/* end of readtoken routine */ - - -/* - * Parse a substitution. At this point, we have read the dollar sign - * and nothing else. - */ - -parsesub: { - int subtype; - int typeloc; - int flags; - char *p; - static const char types[] = "}-+?="; - int linno; - int length; - int c1; - - c = pgetc_linecont(); - if (c == '(') { /* $(command) or $((arith)) */ - if (pgetc_linecont() == '(') { - PARSEARITH(); - } else { - pungetc(); - out = parsebackq(out, &bqlist, 0, - state[level].syntax == DQSYNTAX && - (eofmark == NULL || newvarnest > 0), - state[level].syntax == DQSYNTAX || - state[level].syntax == ARISYNTAX); - } - } else if (c == '{' || is_name(c) || is_special(c)) { - USTPUTC(CTLVAR, out); - typeloc = out - stackblock(); - USTPUTC(VSNORMAL, out); - subtype = VSNORMAL; - flags = 0; - if (c == '{') { - c = pgetc_linecont(); - subtype = 0; - } -varname: - if (!is_eof(c) && is_name(c)) { - length = 0; - do { - STPUTC(c, out); - c = pgetc_linecont(); - length++; - } while (!is_eof(c) && is_in_name(c)); - if (length == 6 && - strncmp(out - length, "LINENO", length) == 0) { - /* Replace the variable name with the - * current line number. */ - STADJUST(-6, out); - CHECKSTRSPACE(11, out); - linno = plinno; - if (funclinno != 0) - linno -= funclinno - 1; - length = snprintf(out, 11, "%d", linno); - if (length > 10) - length = 10; - out += length; - flags |= VSLINENO; - } - } else if (is_digit(c)) { - if (subtype != VSNORMAL) { - do { - STPUTC(c, out); - c = pgetc_linecont(); - } while (is_digit(c)); - } else { - USTPUTC(c, out); - c = pgetc_linecont(); - } - } else if (is_special(c)) { - c1 = c; - c = pgetc_linecont(); - if (subtype == 0 && c1 == '#') { - subtype = VSLENGTH; - if (strchr(types, c) == NULL && c != ':' && - c != '#' && c != '%') - goto varname; - c1 = c; - c = pgetc_linecont(); - if (c1 != '}' && c == '}') { - pungetc(); - c = c1; - goto varname; - } - pungetc(); - c = c1; - c1 = '#'; - subtype = 0; - } - USTPUTC(c1, out); - } else { - subtype = VSERROR; - if (c == '}') - pungetc(); - else if (c == '\n' || c == PEOF) - synerror("Unexpected end of line in substitution"); - else if (BASESYNTAX[c] != CCTL) - USTPUTC(c, out); - } - if (subtype == 0) { - switch (c) { - case ':': - flags |= VSNUL; - c = pgetc_linecont(); - /*FALLTHROUGH*/ - default: - p = strchr(types, c); - if (p == NULL) { - if (c == '\n' || c == PEOF) - synerror("Unexpected end of line in substitution"); - if (flags == VSNUL) - STPUTC(':', out); - if (BASESYNTAX[c] != CCTL) - STPUTC(c, out); - subtype = VSERROR; - } else - subtype = p - types + VSNORMAL; - break; - case '%': - case '#': - { - int cc = c; - subtype = c == '#' ? VSTRIMLEFT : - VSTRIMRIGHT; - c = pgetc_linecont(); - if (c == cc) - subtype++; - else - pungetc(); - break; - } - } - } else if (subtype != VSERROR) { - if (subtype == VSLENGTH && c != '}') - subtype = VSERROR; - pungetc(); - } - STPUTC('=', out); - if (state[level].syntax == DQSYNTAX || - state[level].syntax == ARISYNTAX) - flags |= VSQUOTE; - *(stackblock() + typeloc) = subtype | flags; - if (subtype != VSNORMAL) { - if (level + 1 >= maxnest) { - maxnest *= 2; - if (state == state_static) { - state = parser_temp_alloc( - maxnest * sizeof(*state)); - memcpy(state, state_static, - MAXNEST_static * sizeof(*state)); - } else - state = parser_temp_realloc(state, - maxnest * sizeof(*state)); - } - level++; - state[level].parenlevel = 0; - if (subtype == VSMINUS || subtype == VSPLUS || - subtype == VSQUESTION || subtype == VSASSIGN) { - /* - * For operators that were in the Bourne shell, - * inherit the double-quote state. - */ - state[level].syntax = state[level - 1].syntax; - state[level].category = TSTATE_VAR_OLD; - } else { - /* - * The other operators take a pattern, - * so go to BASESYNTAX. - * Also, ' and " are now special, even - * in here documents. - */ - state[level].syntax = BASESYNTAX; - state[level].category = TSTATE_VAR_NEW; - newvarnest++; - } - } - } else if (c == '\'' && state[level].syntax == BASESYNTAX) { - /* $'cstylequotes' */ - USTPUTC(CTLQUOTEMARK, out); - state[level].syntax = SQSYNTAX; - sqiscstyle = 1; - } else { - USTPUTC('$', out); - pungetc(); - } - goto parsesub_return; -} - - -/* - * Parse an arithmetic expansion (indicate start of one and set state) - */ -parsearith: { - - if (level + 1 >= maxnest) { - maxnest *= 2; - if (state == state_static) { - state = parser_temp_alloc( - maxnest * sizeof(*state)); - memcpy(state, state_static, - MAXNEST_static * sizeof(*state)); - } else - state = parser_temp_realloc(state, - maxnest * sizeof(*state)); - } - level++; - state[level].syntax = ARISYNTAX; - state[level].parenlevel = 0; - state[level].category = TSTATE_ARITH; - USTPUTC(CTLARI, out); - if (state[level - 1].syntax == DQSYNTAX) - USTPUTC('"',out); - else - USTPUTC(' ',out); - goto parsearith_return; -} - -} /* end of readtoken */ - - -/* - * Returns true if the text contains nothing to expand (no dollar signs - * or backquotes). - */ - -static int -noexpand(char *text) -{ - char *p; - char c; - - p = text; - while ((c = *p++) != '\0') { - if ( c == CTLQUOTEMARK) - continue; - if (c == CTLESC) - p++; - else if (BASESYNTAX[(int)c] == CCTL) - return 0; - } - return 1; -} - - -/* - * Return true if the argument is a legal variable name (a letter or - * underscore followed by zero or more letters, underscores, and digits). - */ - -int -goodname(const char *name) -{ - const char *p; - - p = name; - if (! is_name(*p)) - return 0; - while (*++p) { - if (! is_in_name(*p)) - return 0; - } - return 1; -} - - -int -isassignment(const char *p) -{ - if (!is_name(*p)) - return 0; - p++; - for (;;) { - if (*p == '=') - return 1; - else if (!is_in_name(*p)) - return 0; - p++; - } -} - - -static void -consumetoken(int token) -{ - if (readtoken() != token) - synexpect(token); -} - - -/* - * Called when an unexpected token is read during the parse. The argument - * is the token that is expected, or -1 if more than one type of token can - * occur at this point. - */ - -static void -synexpect(int token) -{ - char msg[64]; - - if (token >= 0) { - fmtstr(msg, 64, "%s unexpected (expecting %s)", - tokname[lasttoken], tokname[token]); - } else { - fmtstr(msg, 64, "%s unexpected", tokname[lasttoken]); - } - synerror(msg); -} - - -static void -synerror(const char *msg) -{ - if (commandname) - outfmt(out2, "%s: %d: ", commandname, startlinno); - else if (arg0) - outfmt(out2, "%s: ", arg0); - outfmt(out2, "Syntax error: %s\n", msg); - error((char *)NULL); -} - -static void -setprompt(int which) -{ - whichprompt = which; - if (which == 0) - return; - - if (which == 1 && *ps0val()) { - out2str(expandprompt(ps0val())); - flushout(out2); - } - -#ifndef NO_HISTORY - if (!el) -#endif - { - out2str(getprompt(NULL)); - flushout(out2); - } -} - -static int -pgetc_linecont(void) -{ - int c; - - while ((c = pgetc_macro()) == '\\') { - c = pgetc(); - if (c == '\n') { - plinno++; - if (doprompt) - setprompt(2); - else - setprompt(0); - } else { - pungetc(); - /* Allow the backslash to be pushed back. */ - pushstring("\\", 1, NULL); - return (pgetc()); - } - } - return (c); -} - -static char * -expandprompt(const char *fmt) { - static char ps[PROMPTLEN]; - const char *pwd, *home; - int i, trim; - - /* - * Format prompt string. - */ - for (i = 0; (i < PROMPTLEN - 1) && (*fmt != '\0'); i++, fmt++) - if (*fmt == '\\') - switch (*++fmt) { - - /* - * Hostname. - * - * \h specifies just the local hostname, - * \H specifies fully-qualified hostname. - */ - case 'h': - case 'H': - ps[i] = '\0'; - gethostname(&ps[i], PROMPTLEN - i - 1); - ps[PROMPTLEN - 1] = '\0'; - /* Skip to end of hostname. */ - trim = (*fmt == 'h') ? '.' : '\0'; - while ((ps[i] != '\0') && (ps[i] != trim)) - i++; - --i; - break; - - /* - * Working directory. - * - * \W specifies just the final component, - * \w specifies the entire path. - */ - case 'W': - case 'w': - pwd = lookupvar("PWD"); - home = lookupvar("HOME"); - if (pwd == NULL || *pwd == '\0') - pwd = "?"; - if (home == NULL || *home == '\0') - home = "?"; - if (*fmt == 'W' && - *pwd == '/' && pwd[1] != '\0' && - strcmp(pwd, home) != 0) { - strlcpy(&ps[i], strrchr(pwd, '/') + 1, - PROMPTLEN - i); - } else { - if (strncmp(pwd, home, strlen(home)) == 0) { - ps[i++] = '~'; - pwd += strlen(home); - } - strlcpy(&ps[i], pwd, PROMPTLEN - i); - } - /* Skip to end of path. */ - while (ps[i] != '\0') - i++; - --i; - break; - - /* - * Exit status if non-zero. - */ - case '?': - if (exitstatus != 0) { - snprintf(&ps[i], PROMPTLEN - i, "%d", exitstatus); - while (ps[i] != '\0') - i++; - } - i--; - break; - - /* - * Superuser status. - * - * '$' for normal users, '#' for root. - */ - case '$': - ps[i] = (geteuid() != 0) ? '$' : '#'; - break; - - /* - * A literal \. - */ - case '\\': - ps[i] = '\\'; - break; - - /* - * Emit unrecognized formats verbatim. - */ - default: - ps[i] = '\\'; - if (i < PROMPTLEN - 2) - ps[++i] = *fmt; - break; - } - else - ps[i] = *fmt; - ps[i] = '\0'; - return (ps); -} - -/* - * called by editline -- any expansions to the prompt - * should be added here. - */ -char * -getprompt(void *unused __unused) -{ - const char *fmt; - static char internal_error[] = "??"; - - /* - * Select prompt format. - */ - switch (whichprompt) { - case 0: - fmt = ""; - break; - case 1: - fmt = ps1val(); - break; - case 2: - fmt = ps2val(); - break; - default: - return internal_error; - } - - return expandprompt(fmt); -} - -char * -getrprompt(void *unused __unused) -{ - const char *fmt; - static char internal_error[] = "??"; - - /* - * Select prompt format. - */ - switch (whichprompt) { - case 0: - fmt = ""; - break; - case 1: - fmt = rps1val(); - break; - case 2: - fmt = rps2val(); - break; - default: - return internal_error; - } - - return expandprompt(fmt); -} - - -const char * -expandstr(const char *ps) -{ - union node n; - struct jmploc jmploc; - struct jmploc *const savehandler = handler; - const int saveprompt = doprompt; - struct parsefile *const savetopfile = getcurrentfile(); - struct parser_temp *const saveparser_temp = parser_temp; - const char *result = NULL; - - if (!setjmp(jmploc.loc)) { - handler = &jmploc; - parser_temp = NULL; - setinputstring(ps, 1); - doprompt = 0; - readtoken1(pgetc(), DQSYNTAX, NOEOFMARK, 0); - if (backquotelist != NULL) - error("Command substitution not allowed here"); - - n.narg.type = NARG; - n.narg.next = NULL; - n.narg.text = wordtext; - n.narg.backquote = backquotelist; - - expandarg(&n, NULL, 0); - result = stackblock(); - INTOFF; - } - handler = savehandler; - doprompt = saveprompt; - popfilesupto(savetopfile); - if (parser_temp != saveparser_temp) { - parser_temp_free_all(); - parser_temp = saveparser_temp; - } - if (result != NULL) { - INTON; - } else if (exception == EXINT) - raise(SIGINT); - return result; -} diff --git a/bin/1sh/parser.h b/bin/1sh/parser.h deleted file mode 100644 index bc86f7e4..00000000 --- a/bin/1sh/parser.h +++ /dev/null @@ -1,88 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)parser.h 8.3 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/parser.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -/* control characters in argument strings */ -#define CTLESC '\300' -#define CTLVAR '\301' -#define CTLENDVAR '\371' -#define CTLBACKQ '\372' -#define CTLQUOTE 01 /* ored with CTLBACKQ code if in quotes */ -/* CTLBACKQ | CTLQUOTE == '\373' */ -#define CTLARI '\374' -#define CTLENDARI '\375' -#define CTLQUOTEMARK '\376' -#define CTLQUOTEEND '\377' /* only for ${v+-...} */ - -/* variable substitution byte (follows CTLVAR) */ -#define VSTYPE 0x0f /* type of variable substitution */ -#define VSNUL 0x10 /* colon--treat the empty string as unset */ -#define VSLINENO 0x20 /* expansion of $LINENO, the line number \ - follows immediately */ -#define VSQUOTE 0x80 /* inside double quotes--suppress splitting */ - -/* values of VSTYPE field */ -#define VSNORMAL 0x1 /* normal variable: $var or ${var} */ -#define VSMINUS 0x2 /* ${var-text} */ -#define VSPLUS 0x3 /* ${var+text} */ -#define VSQUESTION 0x4 /* ${var?message} */ -#define VSASSIGN 0x5 /* ${var=text} */ -#define VSTRIMLEFT 0x6 /* ${var#pattern} */ -#define VSTRIMLEFTMAX 0x7 /* ${var##pattern} */ -#define VSTRIMRIGHT 0x8 /* ${var%pattern} */ -#define VSTRIMRIGHTMAX 0x9 /* ${var%%pattern} */ -#define VSLENGTH 0xa /* ${#var} */ -#define VSERROR 0xb /* Syntax error, issue when expanded */ - - -/* - * NEOF is returned by parsecmd when it encounters an end of file. It - * must be distinct from NULL. - */ -#define NEOF ((union node *)-1) -extern int whichprompt; /* 1 == PS1, 2 == PS2 */ -extern const char *const parsekwd[]; - - -union node *parsecmd(int); -union node *parsewordexp(void); -void forcealias(void); -void fixredir(union node *, const char *, int); -int goodname(const char *); -int isassignment(const char *); -char *getprompt(void *); -char *getrprompt(void *); -const char *expandstr(const char *); diff --git a/bin/1sh/printf.c b/bin/1sh/printf.c deleted file mode 100644 index e698c417..00000000 --- a/bin/1sh/printf.c +++ /dev/null @@ -1,688 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright 2018 Staysail Systems, Inc. <info@staysail.tech> - * Copyright 2014 Garrett D'Amore <garrett@damore.org> - * Copyright 2010 Nexenta Systems, Inc. All rights reserved. - * Copyright (c) 1989, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Important: This file is used both as a standalone program /usr/bin/printf - * and as a builtin for /bin/sh (#define SHELL). - */ - -#ifndef SHELL -#ifndef lint -static char const copyright[] = -"@(#) Copyright (c) 1989, 1993\n\ - The Regents of the University of California. All rights reserved.\n"; -#endif /* not lint */ -#endif - -#ifndef lint -#if 0 -static char const sccsid[] = "@(#)printf.c 8.1 (Berkeley) 7/20/93"; -#endif -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/usr.bin/printf/printf.c 337618 2018-08-11 11:13:34Z jilles $"); -#endif /* not lint */ - -#include <sys/types.h> - -#include <ctype.h> -#include <err.h> -#include <errno.h> -#include <inttypes.h> -#include <limits.h> -#include <locale.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <wchar.h> - -#ifdef SHELL -#define main printfcmd -#include "bltin.h" -#include "options.h" -#endif - -#define PF(f, func) do { \ - if (havewidth) \ - if (haveprec) \ - (void)printf(f, fieldwidth, precision, func); \ - else \ - (void)printf(f, fieldwidth, func); \ - else if (haveprec) \ - (void)printf(f, precision, func); \ - else \ - (void)printf(f, func); \ -} while (0) - -static int asciicode(void); -static char *printf_doformat(char *, int *); -static int escape(char *, int, size_t *); -static int getchr(void); -static int getfloating(long double *, int); -static int getint(int *); -static int getnum(intmax_t *, uintmax_t *, int); -static const char - *getstr(void); -static char *mknum(char *, char); -static void usage(void); - -static const char digits[] = "0123456789"; - -static char end_fmt[1]; - -static int myargc; -static char **myargv; -static char **gargv; -static char **maxargv; - -int -main(int argc, char *argv[]) -{ - size_t len; - int end, rval; - char *format, *fmt, *start; -#ifndef SHELL - int ch; - - (void) setlocale(LC_ALL, ""); -#endif - -#ifdef SHELL - nextopt(""); - argc -= argptr - argv; - argv = argptr; -#else - while ((ch = getopt(argc, argv, "")) != -1) - switch (ch) { - case '?': - default: - usage(); - return (1); - } - argc -= optind; - argv += optind; -#endif - - if (argc < 1) { - usage(); - return (1); - } - -#ifdef SHELL - INTOFF; -#endif - /* - * Basic algorithm is to scan the format string for conversion - * specifications -- once one is found, find out if the field - * width or precision is a '*'; if it is, gather up value. Note, - * format strings are reused as necessary to use up the provided - * arguments, arguments of zero/null string are provided to use - * up the format string. - */ - fmt = format = *argv; - escape(fmt, 1, &len); /* backslash interpretation */ - rval = end = 0; - gargv = ++argv; - - for (;;) { - maxargv = gargv; - - myargv = gargv; - for (myargc = 0; gargv[myargc]; myargc++) - /* nop */; - start = fmt; - while (fmt < format + len) { - if (fmt[0] == '%') { - fwrite(start, 1, fmt - start, stdout); - if (fmt[1] == '%') { - /* %% prints a % */ - putchar('%'); - fmt += 2; - } else { - fmt = printf_doformat(fmt, &rval); - if (fmt == NULL || fmt == end_fmt) { -#ifdef SHELL - INTON; -#endif - return (fmt == NULL ? 1 : rval); - } - end = 0; - } - start = fmt; - } else - fmt++; - if (gargv > maxargv) - maxargv = gargv; - } - gargv = maxargv; - - if (end == 1) { - warnx("missing format character"); -#ifdef SHELL - INTON; -#endif - return (1); - } - fwrite(start, 1, fmt - start, stdout); - if (!*gargv) { -#ifdef SHELL - INTON; -#endif - return (rval); - } - /* Restart at the beginning of the format string. */ - fmt = format; - end = 1; - } - /* NOTREACHED */ -} - - -static char * -printf_doformat(char *fmt, int *rval) -{ - static const char skip1[] = "#'-+ 0"; - int fieldwidth, haveprec, havewidth, mod_ldbl, precision; - char convch, nextch; - char start[strlen(fmt) + 1]; - char **fargv; - char *dptr; - int l; - - dptr = start; - *dptr++ = '%'; - *dptr = 0; - - fmt++; - - /* look for "n$" field index specifier */ - l = strspn(fmt, digits); - if ((l > 0) && (fmt[l] == '$')) { - int idx = atoi(fmt); - if (idx <= myargc) { - gargv = &myargv[idx - 1]; - } else { - gargv = &myargv[myargc]; - } - if (gargv > maxargv) - maxargv = gargv; - fmt += l + 1; - - /* save format argument */ - fargv = gargv; - } else { - fargv = NULL; - } - - /* skip to field width */ - while (*fmt && strchr(skip1, *fmt) != NULL) { - *dptr++ = *fmt++; - *dptr = 0; - } - - if (*fmt == '*') { - - fmt++; - l = strspn(fmt, digits); - if ((l > 0) && (fmt[l] == '$')) { - int idx = atoi(fmt); - if (fargv == NULL) { - warnx("incomplete use of n$"); - return (NULL); - } - if (idx <= myargc) { - gargv = &myargv[idx - 1]; - } else { - gargv = &myargv[myargc]; - } - fmt += l + 1; - } else if (fargv != NULL) { - warnx("incomplete use of n$"); - return (NULL); - } - - if (getint(&fieldwidth)) - return (NULL); - if (gargv > maxargv) - maxargv = gargv; - havewidth = 1; - - *dptr++ = '*'; - *dptr = 0; - } else { - havewidth = 0; - - /* skip to possible '.', get following precision */ - while (isdigit(*fmt)) { - *dptr++ = *fmt++; - *dptr = 0; - } - } - - if (*fmt == '.') { - /* precision present? */ - fmt++; - *dptr++ = '.'; - - if (*fmt == '*') { - - fmt++; - l = strspn(fmt, digits); - if ((l > 0) && (fmt[l] == '$')) { - int idx = atoi(fmt); - if (fargv == NULL) { - warnx("incomplete use of n$"); - return (NULL); - } - if (idx <= myargc) { - gargv = &myargv[idx - 1]; - } else { - gargv = &myargv[myargc]; - } - fmt += l + 1; - } else if (fargv != NULL) { - warnx("incomplete use of n$"); - return (NULL); - } - - if (getint(&precision)) - return (NULL); - if (gargv > maxargv) - maxargv = gargv; - haveprec = 1; - *dptr++ = '*'; - *dptr = 0; - } else { - haveprec = 0; - - /* skip to conversion char */ - while (isdigit(*fmt)) { - *dptr++ = *fmt++; - *dptr = 0; - } - } - } else - haveprec = 0; - if (!*fmt) { - warnx("missing format character"); - return (NULL); - } - *dptr++ = *fmt; - *dptr = 0; - - /* - * Look for a length modifier. POSIX doesn't have these, so - * we only support them for floating-point conversions, which - * are extensions. This is useful because the L modifier can - * be used to gain extra range and precision, while omitting - * it is more likely to produce consistent results on different - * architectures. This is not so important for integers - * because overflow is the only bad thing that can happen to - * them, but consider the command printf %a 1.1 - */ - if (*fmt == 'L') { - mod_ldbl = 1; - fmt++; - if (!strchr("aAeEfFgG", *fmt)) { - warnx("bad modifier L for %%%c", *fmt); - return (NULL); - } - } else { - mod_ldbl = 0; - } - - /* save the current arg offset, and set to the format arg */ - if (fargv != NULL) { - gargv = fargv; - } - - convch = *fmt; - nextch = *++fmt; - - *fmt = '\0'; - switch (convch) { - case 'b': { - size_t len; - char *p; - int getout; - - /* Convert "b" to "s" for output. */ - start[strlen(start) - 1] = 's'; - if ((p = strdup(getstr())) == NULL) { - warnx("%s", strerror(ENOMEM)); - return (NULL); - } - getout = escape(p, 0, &len); - PF(start, p); - /* Restore format for next loop. */ - - free(p); - if (getout) - return (end_fmt); - break; - } - case 'c': { - char p; - - p = getchr(); - if (p != '\0') - PF(start, p); - break; - } - case 's': { - const char *p; - - p = getstr(); - PF(start, p); - break; - } - case 'd': case 'i': case 'o': case 'u': case 'x': case 'X': { - char *f; - intmax_t val; - uintmax_t uval; - int signedconv; - - signedconv = (convch == 'd' || convch == 'i'); - if ((f = mknum(start, convch)) == NULL) - return (NULL); - if (getnum(&val, &uval, signedconv)) - *rval = 1; - if (signedconv) - PF(f, val); - else - PF(f, uval); - break; - } - case 'e': case 'E': - case 'f': case 'F': - case 'g': case 'G': - case 'a': case 'A': { - long double p; - - if (getfloating(&p, mod_ldbl)) - *rval = 1; - if (mod_ldbl) - PF(start, p); - else - PF(start, (double)p); - break; - } - default: - warnx("illegal format character %c", convch); - return (NULL); - } - *fmt = nextch; - /* return the gargv to the next element */ - return (fmt); -} - -static char * -mknum(char *str, char ch) -{ - static char *copy; - static size_t copy_size; - char *newcopy; - size_t len, newlen; - - len = strlen(str) + 2; - if (len > copy_size) { - newlen = ((len + 1023) >> 10) << 10; - if ((newcopy = realloc(copy, newlen)) == NULL) { - warnx("%s", strerror(ENOMEM)); - return (NULL); - } - copy = newcopy; - copy_size = newlen; - } - - memmove(copy, str, len - 3); - copy[len - 3] = 'j'; - copy[len - 2] = ch; - copy[len - 1] = '\0'; - return (copy); -} - -static int -escape(char *fmt, int percent, size_t *len) -{ - char *save, *store, c; - int value; - - for (save = store = fmt; ((c = *fmt) != 0); ++fmt, ++store) { - if (c != '\\') { - *store = c; - continue; - } - switch (*++fmt) { - case '\0': /* EOS, user error */ - *store = '\\'; - *++store = '\0'; - *len = store - save; - return (0); - case '\\': /* backslash */ - case '\'': /* single quote */ - *store = *fmt; - break; - case 'a': /* bell/alert */ - *store = '\a'; - break; - case 'b': /* backspace */ - *store = '\b'; - break; - case 'c': - if (!percent) { - *store = '\0'; - *len = store - save; - return (1); - } - *store = 'c'; - break; - case 'f': /* form-feed */ - *store = '\f'; - break; - case 'n': /* newline */ - *store = '\n'; - break; - case 'r': /* carriage-return */ - *store = '\r'; - break; - case 't': /* horizontal tab */ - *store = '\t'; - break; - case 'v': /* vertical tab */ - *store = '\v'; - break; - /* octal constant */ - case '0': case '1': case '2': case '3': - case '4': case '5': case '6': case '7': - c = (!percent && *fmt == '0') ? 4 : 3; - for (value = 0; - c-- && *fmt >= '0' && *fmt <= '7'; ++fmt) { - value <<= 3; - value += *fmt - '0'; - } - --fmt; - if (percent && value == '%') { - *store++ = '%'; - *store = '%'; - } else - *store = (char)value; - break; - default: - *store = *fmt; - break; - } - } - *store = '\0'; - *len = store - save; - return (0); -} - -static int -getchr(void) -{ - if (!*gargv) - return ('\0'); - return ((int)**gargv++); -} - -static const char * -getstr(void) -{ - if (!*gargv) - return (""); - return (*gargv++); -} - -static int -getint(int *ip) -{ - intmax_t val; - uintmax_t uval; - int rval; - - if (getnum(&val, &uval, 1)) - return (1); - rval = 0; - if (val < INT_MIN || val > INT_MAX) { - warnx("%s: %s", *gargv, strerror(ERANGE)); - rval = 1; - } - *ip = (int)val; - return (rval); -} - -static int -getnum(intmax_t *ip, uintmax_t *uip, int signedconv) -{ - char *ep; - int rval; - - if (!*gargv) { - *ip = *uip = 0; - return (0); - } - if (**gargv == '"' || **gargv == '\'') { - if (signedconv) - *ip = asciicode(); - else - *uip = asciicode(); - return (0); - } - rval = 0; - errno = 0; - if (signedconv) - *ip = strtoimax(*gargv, &ep, 0); - else - *uip = strtoumax(*gargv, &ep, 0); - if (ep == *gargv) { - warnx("%s: expected numeric value", *gargv); - rval = 1; - } - else if (*ep != '\0') { - warnx("%s: not completely converted", *gargv); - rval = 1; - } - if (errno == ERANGE) { - warnx("%s: %s", *gargv, strerror(ERANGE)); - rval = 1; - } - ++gargv; - return (rval); -} - -static int -getfloating(long double *dp, int mod_ldbl) -{ - char *ep; - int rval; - - if (!*gargv) { - *dp = 0.0; - return (0); - } - if (**gargv == '"' || **gargv == '\'') { - *dp = asciicode(); - return (0); - } - rval = 0; - errno = 0; - if (mod_ldbl) - *dp = strtold(*gargv, &ep); - else - *dp = strtod(*gargv, &ep); - if (ep == *gargv) { - warnx("%s: expected numeric value", *gargv); - rval = 1; - } else if (*ep != '\0') { - warnx("%s: not completely converted", *gargv); - rval = 1; - } - if (errno == ERANGE) { - warnx("%s: %s", *gargv, strerror(ERANGE)); - rval = 1; - } - ++gargv; - return (rval); -} - -static int -asciicode(void) -{ - int ch; - wchar_t wch; - mbstate_t mbs; - - ch = (unsigned char)**gargv; - if (ch == '\'' || ch == '"') { - memset(&mbs, 0, sizeof(mbs)); - switch (mbrtowc(&wch, *gargv + 1, MB_LEN_MAX, &mbs)) { - case (size_t)-2: - case (size_t)-1: - wch = (unsigned char)gargv[0][1]; - break; - case 0: - wch = 0; - break; - } - ch = wch; - } - ++gargv; - return (ch); -} - -static void -usage(void) -{ - (void)fprintf(stderr, "usage: printf format [arguments ...]\n"); -} diff --git a/bin/1sh/redir.c b/bin/1sh/redir.c deleted file mode 100644 index 616053cf..00000000 --- a/bin/1sh/redir.c +++ /dev/null @@ -1,365 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)redir.c 8.2 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/redir.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <sys/types.h> -#include <sys/stat.h> -#include <signal.h> -#include <string.h> -#include <fcntl.h> -#include <errno.h> -#include <unistd.h> -#include <stdlib.h> - -/* - * Code for dealing with input/output redirection. - */ - -#include "shell.h" -#include "nodes.h" -#include "jobs.h" -#include "expand.h" -#include "redir.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "options.h" - - -#define EMPTY -2 /* marks an unused slot in redirtab */ -#define CLOSED -1 /* fd was not open before redir */ - - -struct redirtab { - struct redirtab *next; - int renamed[10]; - int fd0_redirected; - unsigned int empty_redirs; -}; - - -static struct redirtab *redirlist; - -/* - * We keep track of whether or not fd0 has been redirected. This is for - * background commands, where we want to redirect fd0 to /dev/null only - * if it hasn't already been redirected. -*/ -static int fd0_redirected = 0; - -/* Number of redirtabs that have not been allocated. */ -static unsigned int empty_redirs = 0; - -static void openredirect(union node *, char[10 ]); -static int openhere(union node *); - - -/* - * Process a list of redirection commands. If the REDIR_PUSH flag is set, - * old file descriptors are stashed away so that the redirection can be - * undone by calling popredir. If the REDIR_BACKQ flag is set, then the - * standard output, and the standard error if it becomes a duplicate of - * stdout, is saved in memory. -* - * We suppress interrupts so that we won't leave open file - * descriptors around. Because the signal handler remains - * installed and we do not use system call restart, interrupts - * will still abort blocking opens such as fifos (they will fail - * with EINTR). There is, however, a race condition if an interrupt - * arrives after INTOFF and before open blocks. - */ - -void -redirect(union node *redir, int flags) -{ - union node *n; - struct redirtab *sv = NULL; - int i; - int fd; - char memory[10]; /* file descriptors to write to memory */ - - INTOFF; - for (i = 10 ; --i >= 0 ; ) - memory[i] = 0; - memory[1] = flags & REDIR_BACKQ; - if (flags & REDIR_PUSH) { - empty_redirs++; - if (redir != NULL) { - sv = ckmalloc(sizeof (struct redirtab)); - for (i = 0 ; i < 10 ; i++) - sv->renamed[i] = EMPTY; - sv->fd0_redirected = fd0_redirected; - sv->empty_redirs = empty_redirs - 1; - sv->next = redirlist; - redirlist = sv; - empty_redirs = 0; - } - } - for (n = redir ; n ; n = n->nfile.next) { - fd = n->nfile.fd; - if (fd == 0) - fd0_redirected = 1; - if ((n->nfile.type == NTOFD || n->nfile.type == NFROMFD) && - n->ndup.dupfd == fd) - continue; /* redirect from/to same file descriptor */ - - if ((flags & REDIR_PUSH) && sv->renamed[fd] == EMPTY) { - INTOFF; - if ((i = fcntl(fd, F_DUPFD_CLOEXEC, 10)) == -1) { - switch (errno) { - case EBADF: - i = CLOSED; - break; - default: - INTON; - error("%d: %s", fd, strerror(errno)); - break; - } - } - sv->renamed[fd] = i; - INTON; - } - openredirect(n, memory); - INTON; - INTOFF; - } - if (memory[1]) - out1 = &memout; - if (memory[2]) - out2 = &memout; - INTON; -} - - -static void -openredirect(union node *redir, char memory[10]) -{ - struct stat sb; - int fd = redir->nfile.fd; - const char *fname; - int f; - int e; - - memory[fd] = 0; - switch (redir->nfile.type) { - case NFROM: - fname = redir->nfile.expfname; - if ((f = open(fname, O_RDONLY)) < 0) - error("cannot open %s: %s", fname, strerror(errno)); - break; - case NFROMTO: - fname = redir->nfile.expfname; - if ((f = open(fname, O_RDWR|O_CREAT, 0666)) < 0) - error("cannot create %s: %s", fname, strerror(errno)); - break; - case NTO: - if (Cflag) { - fname = redir->nfile.expfname; - if (stat(fname, &sb) == -1) { - if ((f = open(fname, O_WRONLY|O_CREAT|O_EXCL, 0666)) < 0) - error("cannot create %s: %s", fname, strerror(errno)); - } else if (!S_ISREG(sb.st_mode)) { - if ((f = open(fname, O_WRONLY, 0666)) < 0) - error("cannot create %s: %s", fname, strerror(errno)); - if (fstat(f, &sb) != -1 && S_ISREG(sb.st_mode)) { - close(f); - error("cannot create %s: %s", fname, - strerror(EEXIST)); - } - } else - error("cannot create %s: %s", fname, - strerror(EEXIST)); - break; - } - /* FALLTHROUGH */ - case NCLOBBER: - fname = redir->nfile.expfname; - if ((f = open(fname, O_WRONLY|O_CREAT|O_TRUNC, 0666)) < 0) - error("cannot create %s: %s", fname, strerror(errno)); - break; - case NAPPEND: - fname = redir->nfile.expfname; - if ((f = open(fname, O_WRONLY|O_CREAT|O_APPEND, 0666)) < 0) - error("cannot create %s: %s", fname, strerror(errno)); - break; - case NTOFD: - case NFROMFD: - if (redir->ndup.dupfd >= 0) { /* if not ">&-" */ - if (memory[redir->ndup.dupfd]) - memory[fd] = 1; - else { - if (dup2(redir->ndup.dupfd, fd) < 0) - error("%d: %s", redir->ndup.dupfd, - strerror(errno)); - } - } else { - close(fd); - } - return; - case NHERE: - case NXHERE: - f = openhere(redir); - break; - default: - abort(); - } - if (f != fd) { - if (dup2(f, fd) == -1) { - e = errno; - close(f); - error("%d: %s", fd, strerror(e)); - } - close(f); - } -} - - -/* - * Handle here documents. Normally we fork off a process to write the - * data to a pipe. If the document is short, we can stuff the data in - * the pipe without forking. - */ - -static int -openhere(union node *redir) -{ - const char *p; - int pip[2]; - size_t len = 0; - int flags; - ssize_t written = 0; - - if (pipe(pip) < 0) - error("Pipe call failed: %s", strerror(errno)); - - if (redir->type == NXHERE) - p = redir->nhere.expdoc; - else - p = redir->nhere.doc->narg.text; - len = strlen(p); - if (len == 0) - goto out; - flags = fcntl(pip[1], F_GETFL, 0); - if (flags != -1 && fcntl(pip[1], F_SETFL, flags | O_NONBLOCK) != -1) { - written = write(pip[1], p, len); - if (written < 0) - written = 0; - if ((size_t)written == len) - goto out; - fcntl(pip[1], F_SETFL, flags); - } - - if (forkshell((struct job *)NULL, (union node *)NULL, FORK_NOJOB) == 0) { - close(pip[0]); - signal(SIGINT, SIG_IGN); - signal(SIGQUIT, SIG_IGN); - signal(SIGHUP, SIG_IGN); - signal(SIGTSTP, SIG_IGN); - signal(SIGPIPE, SIG_DFL); - xwrite(pip[1], p + written, len - written); - _exit(0); - } -out: - close(pip[1]); - return pip[0]; -} - - - -/* - * Undo the effects of the last redirection. - */ - -void -popredir(void) -{ - struct redirtab *rp = redirlist; - int i; - - INTOFF; - if (empty_redirs > 0) { - empty_redirs--; - INTON; - return; - } - for (i = 0 ; i < 10 ; i++) { - if (rp->renamed[i] != EMPTY) { - if (rp->renamed[i] >= 0) { - dup2(rp->renamed[i], i); - close(rp->renamed[i]); - } else { - close(i); - } - } - } - fd0_redirected = rp->fd0_redirected; - empty_redirs = rp->empty_redirs; - redirlist = rp->next; - ckfree(rp); - INTON; -} - -/* Return true if fd 0 has already been redirected at least once. */ -int -fd0_redirected_p(void) -{ - return fd0_redirected != 0; -} - -/* - * Discard all saved file descriptors. - */ - -void -clearredir(void) -{ - struct redirtab *rp; - int i; - - for (rp = redirlist ; rp ; rp = rp->next) { - for (i = 0 ; i < 10 ; i++) { - if (rp->renamed[i] >= 0) { - close(rp->renamed[i]); - } - rp->renamed[i] = EMPTY; - } - } -} diff --git a/bin/1sh/redir.h b/bin/1sh/redir.h deleted file mode 100644 index 8c171423..00000000 --- a/bin/1sh/redir.h +++ /dev/null @@ -1,47 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)redir.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/redir.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -/* flags passed to redirect */ -#define REDIR_PUSH 01 /* save previous values of file descriptors */ -#define REDIR_BACKQ 02 /* save the command output in memory */ - -union node; -void redirect(union node *, int); -void popredir(void); -int fd0_redirected_p(void); -void clearredir(void); - diff --git a/bin/1sh/shell.h b/bin/1sh/shell.h deleted file mode 100644 index 5e3d60dc..00000000 --- a/bin/1sh/shell.h +++ /dev/null @@ -1,79 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)shell.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/shell.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -#ifndef SHELL_H_ -#define SHELL_H_ - -#include <inttypes.h> - -/* - * The follow should be set to reflect the type of system you have: - * JOBS -> 1 if you have Berkeley job control, 0 otherwise. - * define DEBUG=1 to compile in debugging (set global "debug" to turn on) - * define DEBUG=2 to compile in and turn on debugging. - * - * When debugging is on, debugging info will be written to ./trace and - * a quit signal will generate a core dump. - */ - - -#define JOBS 1 -/* #define DEBUG 1 */ - -/* - * Type of used arithmetics. SUSv3 requires us to have at least signed long. - */ -typedef intmax_t arith_t; -#define ARITH_FORMAT_STR "%" PRIdMAX -#define atoarith_t(arg) strtoimax(arg, NULL, 0) -#define strtoarith_t(nptr, endptr, base) strtoimax(nptr, endptr, base) -#define ARITH_MIN INTMAX_MIN -#define ARITH_MAX INTMAX_MAX - -typedef void *pointer; - -#include <sys/cdefs.h> - -extern char nullstr[1]; /* null string */ - -#ifdef DEBUG -#define TRACE(param) sh_trace param -#else -#define TRACE(param) -#endif - -#endif /* !SHELL_H_ */ diff --git a/bin/1sh/show.c b/bin/1sh/show.c deleted file mode 100644 index e8a55886..00000000 --- a/bin/1sh/show.c +++ /dev/null @@ -1,410 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)show.c 8.3 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/show.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <fcntl.h> -#include <stdio.h> -#include <stdlib.h> -#include <stdarg.h> -#include <errno.h> - -#include "shell.h" -#include "parser.h" -#include "nodes.h" -#include "mystring.h" -#include "show.h" - - -#ifdef DEBUG -static void shtree(union node *, int, char *, FILE*); -static void shcmd(union node *, FILE *); -static void sharg(union node *, FILE *); -static void indent(int, char *, FILE *); -static void trstring(char *); - - -void -showtree(union node *n) -{ - trputs("showtree called\n"); - shtree(n, 1, NULL, stdout); -} - - -static void -shtree(union node *n, int ind, char *pfx, FILE *fp) -{ - struct nodelist *lp; - char *s; - - if (n == NULL) - return; - - indent(ind, pfx, fp); - switch(n->type) { - case NSEMI: - s = "; "; - goto binop; - case NAND: - s = " && "; - goto binop; - case NOR: - s = " || "; -binop: - shtree(n->nbinary.ch1, ind, NULL, fp); - /* if (ind < 0) */ - fputs(s, fp); - shtree(n->nbinary.ch2, ind, NULL, fp); - break; - case NCMD: - shcmd(n, fp); - if (ind >= 0) - putc('\n', fp); - break; - case NPIPE: - for (lp = n->npipe.cmdlist ; lp ; lp = lp->next) { - shcmd(lp->n, fp); - if (lp->next) - fputs(" | ", fp); - } - if (n->npipe.backgnd) - fputs(" &", fp); - if (ind >= 0) - putc('\n', fp); - break; - default: - fprintf(fp, "<node type %d>", n->type); - if (ind >= 0) - putc('\n', fp); - break; - } -} - - - -static void -shcmd(union node *cmd, FILE *fp) -{ - union node *np; - int first; - char *s; - int dftfd; - - first = 1; - for (np = cmd->ncmd.args ; np ; np = np->narg.next) { - if (! first) - putchar(' '); - sharg(np, fp); - first = 0; - } - for (np = cmd->ncmd.redirect ; np ; np = np->nfile.next) { - if (! first) - putchar(' '); - switch (np->nfile.type) { - case NTO: s = ">"; dftfd = 1; break; - case NAPPEND: s = ">>"; dftfd = 1; break; - case NTOFD: s = ">&"; dftfd = 1; break; - case NCLOBBER: s = ">|"; dftfd = 1; break; - case NFROM: s = "<"; dftfd = 0; break; - case NFROMTO: s = "<>"; dftfd = 0; break; - case NFROMFD: s = "<&"; dftfd = 0; break; - case NHERE: s = "<<"; dftfd = 0; break; - case NXHERE: s = "<<"; dftfd = 0; break; - default: s = "*error*"; dftfd = 0; break; - } - if (np->nfile.fd != dftfd) - fprintf(fp, "%d", np->nfile.fd); - fputs(s, fp); - if (np->nfile.type == NTOFD || np->nfile.type == NFROMFD) { - if (np->ndup.dupfd >= 0) - fprintf(fp, "%d", np->ndup.dupfd); - else - fprintf(fp, "-"); - } else if (np->nfile.type == NHERE) { - fprintf(fp, "HERE"); - } else if (np->nfile.type == NXHERE) { - fprintf(fp, "XHERE"); - } else { - sharg(np->nfile.fname, fp); - } - first = 0; - } -} - - - -static void -sharg(union node *arg, FILE *fp) -{ - char *p; - struct nodelist *bqlist; - int subtype; - - if (arg->type != NARG) { - printf("<node type %d>\n", arg->type); - fflush(stdout); - abort(); - } - bqlist = arg->narg.backquote; - for (p = arg->narg.text ; *p ; p++) { - switch (*p) { - case CTLESC: - putc(*++p, fp); - break; - case CTLVAR: - putc('$', fp); - putc('{', fp); - subtype = *++p; - if (subtype == VSLENGTH) - putc('#', fp); - - while (*p != '=') - putc(*p++, fp); - - if (subtype & VSNUL) - putc(':', fp); - - switch (subtype & VSTYPE) { - case VSNORMAL: - putc('}', fp); - break; - case VSMINUS: - putc('-', fp); - break; - case VSPLUS: - putc('+', fp); - break; - case VSQUESTION: - putc('?', fp); - break; - case VSASSIGN: - putc('=', fp); - break; - case VSTRIMLEFT: - putc('#', fp); - break; - case VSTRIMLEFTMAX: - putc('#', fp); - putc('#', fp); - break; - case VSTRIMRIGHT: - putc('%', fp); - break; - case VSTRIMRIGHTMAX: - putc('%', fp); - putc('%', fp); - break; - case VSLENGTH: - break; - default: - printf("<subtype %d>", subtype); - } - break; - case CTLENDVAR: - putc('}', fp); - break; - case CTLBACKQ: - case CTLBACKQ|CTLQUOTE: - putc('$', fp); - putc('(', fp); - shtree(bqlist->n, -1, NULL, fp); - putc(')', fp); - break; - default: - putc(*p, fp); - break; - } - } -} - - -static void -indent(int amount, char *pfx, FILE *fp) -{ - int i; - - for (i = 0 ; i < amount ; i++) { - if (pfx && i == amount - 1) - fputs(pfx, fp); - putc('\t', fp); - } -} - - -/* - * Debugging stuff. - */ - - -FILE *tracefile; - -#if DEBUG >= 2 -int debug = 1; -#else -int debug = 0; -#endif - - -void -trputc(int c) -{ - if (tracefile == NULL) - return; - putc(c, tracefile); - if (c == '\n') - fflush(tracefile); -} - - -void -sh_trace(const char *fmt, ...) -{ - va_list va; - va_start(va, fmt); - if (tracefile != NULL) { - (void) vfprintf(tracefile, fmt, va); - if (strchr(fmt, '\n')) - (void) fflush(tracefile); - } - va_end(va); -} - - -void -trputs(const char *s) -{ - if (tracefile == NULL) - return; - fputs(s, tracefile); - if (strchr(s, '\n')) - fflush(tracefile); -} - - -static void -trstring(char *s) -{ - char *p; - char c; - - if (tracefile == NULL) - return; - putc('"', tracefile); - for (p = s ; *p ; p++) { - switch (*p) { - case '\n': c = 'n'; goto backslash; - case '\t': c = 't'; goto backslash; - case '\r': c = 'r'; goto backslash; - case '"': c = '"'; goto backslash; - case '\\': c = '\\'; goto backslash; - case CTLESC: c = 'e'; goto backslash; - case CTLVAR: c = 'v'; goto backslash; - case CTLVAR+CTLQUOTE: c = 'V'; goto backslash; - case CTLBACKQ: c = 'q'; goto backslash; - case CTLBACKQ+CTLQUOTE: c = 'Q'; goto backslash; -backslash: putc('\\', tracefile); - putc(c, tracefile); - break; - default: - if (*p >= ' ' && *p <= '~') - putc(*p, tracefile); - else { - putc('\\', tracefile); - putc(*p >> 6 & 03, tracefile); - putc(*p >> 3 & 07, tracefile); - putc(*p & 07, tracefile); - } - break; - } - } - putc('"', tracefile); -} - - -void -trargs(char **ap) -{ - if (tracefile == NULL) - return; - while (*ap) { - trstring(*ap++); - if (*ap) - putc(' ', tracefile); - else - putc('\n', tracefile); - } - fflush(tracefile); -} - - -void -opentrace(void) -{ - char s[100]; - int flags; - - if (!debug) - return; -#ifdef not_this_way - { - char *p; - if ((p = getenv("HOME")) == NULL) { - if (geteuid() == 0) - p = "/"; - else - p = "/tmp"; - } - strcpy(s, p); - strcat(s, "/trace"); - } -#else - strcpy(s, "./trace"); -#endif /* not_this_way */ - if ((tracefile = fopen(s, "a")) == NULL) { - fprintf(stderr, "Can't open %s: %s\n", s, strerror(errno)); - return; - } - if ((flags = fcntl(fileno(tracefile), F_GETFL, 0)) >= 0) - fcntl(fileno(tracefile), F_SETFL, flags | O_APPEND); - fputs("\nTracing started.\n", tracefile); - fflush(tracefile); -} -#endif /* DEBUG */ diff --git a/bin/1sh/show.h b/bin/1sh/show.h deleted file mode 100644 index 587c5ada..00000000 --- a/bin/1sh/show.h +++ /dev/null @@ -1,42 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1995 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)show.h 1.1 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/show.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -void showtree(union node *); -#ifdef DEBUG -void sh_trace(const char *, ...) __printflike(1, 2); -void trargs(char **); -void trputc(int); -void trputs(const char *); -void opentrace(void); -#endif diff --git a/bin/1sh/test.c b/bin/1sh/test.c deleted file mode 100644 index a153cdb3..00000000 --- a/bin/1sh/test.c +++ /dev/null @@ -1,630 +0,0 @@ -/* $NetBSD: test.c,v 1.21 1999/04/05 09:48:38 kleink Exp $ */ - -/*- - * test(1); version 7-like -- author Erik Baalbergen - * modified by Eric Gisin to be used as built-in. - * modified by Arnold Robbins to add SVR3 compatibility - * (-x -c -b -p -u -g -k) plus Korn's -L -nt -ot -ef and new -S (socket). - * modified by J.T. Conklin for NetBSD. - * - * This program is in the Public Domain. - */ -/* - * Important: This file is used both as a standalone program /bin/test and - * as a builtin for /bin/sh (#define SHELL). - */ - -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/test/test.c 298232 2016-04-19 00:38:07Z araujo $"); - -#include <sys/types.h> -#include <sys/stat.h> - -#include <ctype.h> -#include <err.h> -#include <errno.h> -#include <fcntl.h> -#include <inttypes.h> -#include <limits.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> - -#ifdef SHELL -#define main testcmd -#include "bltin.h" -#else -#include <locale.h> - -static void error(const char *, ...) __dead2 __printf0like(1, 2); - -static void -error(const char *msg, ...) -{ - va_list ap; - va_start(ap, msg); - verrx(2, msg, ap); - /*NOTREACHED*/ - va_end(ap); -} -#endif - -/* test(1) accepts the following grammar: - oexpr ::= aexpr | aexpr "-o" oexpr ; - aexpr ::= nexpr | nexpr "-a" aexpr ; - nexpr ::= primary | "!" primary - primary ::= unary-operator operand - | operand binary-operator operand - | operand - | "(" oexpr ")" - ; - unary-operator ::= "-r"|"-w"|"-x"|"-f"|"-d"|"-c"|"-b"|"-p"| - "-u"|"-g"|"-k"|"-s"|"-t"|"-z"|"-n"|"-o"|"-O"|"-G"|"-L"|"-S"; - - binary-operator ::= "="|"!="|"-eq"|"-ne"|"-ge"|"-gt"|"-le"|"-lt"| - "-nt"|"-ot"|"-ef"; - operand ::= <any legal UNIX file name> -*/ - -enum token_types { - UNOP = 0x100, - BINOP = 0x200, - BUNOP = 0x300, - BBINOP = 0x400, - PAREN = 0x500 -}; - -enum token { - EOI, - OPERAND, - FILRD = UNOP + 1, - FILWR, - FILEX, - FILEXIST, - FILREG, - FILDIR, - FILCDEV, - FILBDEV, - FILFIFO, - FILSOCK, - FILSYM, - FILGZ, - FILTT, - FILSUID, - FILSGID, - FILSTCK, - STREZ, - STRNZ, - FILUID, - FILGID, - FILNT = BINOP + 1, - FILOT, - FILEQ, - STREQ, - STRNE, - STRLT, - STRGT, - INTEQ, - INTNE, - INTGE, - INTGT, - INTLE, - INTLT, - UNOT = BUNOP + 1, - BAND = BBINOP + 1, - BOR, - LPAREN = PAREN + 1, - RPAREN -}; - -#define TOKEN_TYPE(token) ((token) & 0xff00) - -static const struct t_op { - char op_text[2]; - short op_num; -} ops1[] = { - {"=", STREQ}, - {"<", STRLT}, - {">", STRGT}, - {"!", UNOT}, - {"(", LPAREN}, - {")", RPAREN}, -}, opsm1[] = { - {"r", FILRD}, - {"w", FILWR}, - {"x", FILEX}, - {"e", FILEXIST}, - {"f", FILREG}, - {"d", FILDIR}, - {"c", FILCDEV}, - {"b", FILBDEV}, - {"p", FILFIFO}, - {"u", FILSUID}, - {"g", FILSGID}, - {"k", FILSTCK}, - {"s", FILGZ}, - {"t", FILTT}, - {"z", STREZ}, - {"n", STRNZ}, - {"h", FILSYM}, /* for backwards compat */ - {"O", FILUID}, - {"G", FILGID}, - {"L", FILSYM}, - {"S", FILSOCK}, - {"a", BAND}, - {"o", BOR}, -}, ops2[] = { - {"==", STREQ}, - {"!=", STRNE}, -}, opsm2[] = { - {"eq", INTEQ}, - {"ne", INTNE}, - {"ge", INTGE}, - {"gt", INTGT}, - {"le", INTLE}, - {"lt", INTLT}, - {"nt", FILNT}, - {"ot", FILOT}, - {"ef", FILEQ}, -}; - -static int nargc; -static char **t_wp; -static int parenlevel; - -static int aexpr(enum token); -static int binop(enum token); -static int equalf(const char *, const char *); -static int filstat(char *, enum token); -static int getn(const char *); -static intmax_t getq(const char *); -static int intcmp(const char *, const char *); -static int isunopoperand(void); -static int islparenoperand(void); -static int isrparenoperand(void); -static int newerf(const char *, const char *); -static int nexpr(enum token); -static int oexpr(enum token); -static int olderf(const char *, const char *); -static int primary(enum token); -static void syntax(const char *, const char *); -static enum token t_lex(char *); - -int -main(int argc, char **argv) -{ - int res; - char *p; - - if ((p = strrchr(argv[0], '/')) == NULL) - p = argv[0]; - else - p++; - if (strcmp(p, "[") == 0) { - if (strcmp(argv[--argc], "]") != 0) - error("missing ]"); - argv[argc] = NULL; - } - - /* no expression => false */ - if (--argc <= 0) - return 1; - -#ifndef SHELL - (void)setlocale(LC_CTYPE, ""); -#endif - nargc = argc; - t_wp = &argv[1]; - parenlevel = 0; - if (nargc == 4 && strcmp(*t_wp, "!") == 0) { - /* Things like ! "" -o x do not fit in the normal grammar. */ - --nargc; - ++t_wp; - res = oexpr(t_lex(*t_wp)); - } else - res = !oexpr(t_lex(*t_wp)); - - if (--nargc > 0) - syntax(*t_wp, "unexpected operator"); - - return res; -} - -static void -syntax(const char *op, const char *msg) -{ - - if (op && *op) - error("%s: %s", op, msg); - else - error("%s", msg); -} - -static int -oexpr(enum token n) -{ - int res; - - res = aexpr(n); - if (t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL) == BOR) - return oexpr(t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL)) || - res; - t_wp--; - nargc++; - return res; -} - -static int -aexpr(enum token n) -{ - int res; - - res = nexpr(n); - if (t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL) == BAND) - return aexpr(t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL)) && - res; - t_wp--; - nargc++; - return res; -} - -static int -nexpr(enum token n) -{ - if (n == UNOT) - return !nexpr(t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL)); - return primary(n); -} - -static int -primary(enum token n) -{ - enum token nn; - int res; - - if (n == EOI) - return 0; /* missing expression */ - if (n == LPAREN) { - parenlevel++; - if ((nn = t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL)) == - RPAREN) { - parenlevel--; - return 0; /* missing expression */ - } - res = oexpr(nn); - if (t_lex(nargc > 0 ? (--nargc, *++t_wp) : NULL) != RPAREN) - syntax(NULL, "closing paren expected"); - parenlevel--; - return res; - } - if (TOKEN_TYPE(n) == UNOP) { - /* unary expression */ - if (--nargc == 0) - syntax(NULL, "argument expected"); /* impossible */ - switch (n) { - case STREZ: - return strlen(*++t_wp) == 0; - case STRNZ: - return strlen(*++t_wp) != 0; - case FILTT: - return isatty(getn(*++t_wp)); - default: - return filstat(*++t_wp, n); - } - } - - nn = t_lex(nargc > 0 ? t_wp[1] : NULL); - if (TOKEN_TYPE(nn) == BINOP) - return binop(nn); - - return strlen(*t_wp) > 0; -} - -static int -binop(enum token n) -{ - const char *opnd1, *op, *opnd2; - - opnd1 = *t_wp; - op = nargc > 0 ? (--nargc, *++t_wp) : NULL; - - if ((opnd2 = nargc > 0 ? (--nargc, *++t_wp) : NULL) == NULL) - syntax(op, "argument expected"); - - switch (n) { - case STREQ: - return strcmp(opnd1, opnd2) == 0; - case STRNE: - return strcmp(opnd1, opnd2) != 0; - case STRLT: - return strcmp(opnd1, opnd2) < 0; - case STRGT: - return strcmp(opnd1, opnd2) > 0; - case INTEQ: - return intcmp(opnd1, opnd2) == 0; - case INTNE: - return intcmp(opnd1, opnd2) != 0; - case INTGE: - return intcmp(opnd1, opnd2) >= 0; - case INTGT: - return intcmp(opnd1, opnd2) > 0; - case INTLE: - return intcmp(opnd1, opnd2) <= 0; - case INTLT: - return intcmp(opnd1, opnd2) < 0; - case FILNT: - return newerf (opnd1, opnd2); - case FILOT: - return olderf (opnd1, opnd2); - case FILEQ: - return equalf (opnd1, opnd2); - default: - abort(); - /* NOTREACHED */ - } -} - -static int -filstat(char *nm, enum token mode) -{ - struct stat s; - - if (mode == FILSYM ? lstat(nm, &s) : stat(nm, &s)) - return 0; - - switch (mode) { - case FILRD: - return (faccessat(AT_FDCWD, nm, R_OK, AT_EACCESS) == 0); - case FILWR: - return (faccessat(AT_FDCWD, nm, W_OK, AT_EACCESS) == 0); - case FILEX: - /* XXX work around eaccess(2) false positives for superuser */ - if (faccessat(AT_FDCWD, nm, X_OK, AT_EACCESS) != 0) - return 0; - if (S_ISDIR(s.st_mode) || geteuid() != 0) - return 1; - return (s.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)) != 0; - case FILEXIST: - return (faccessat(AT_FDCWD, nm, F_OK, AT_EACCESS) == 0); - case FILREG: - return S_ISREG(s.st_mode); - case FILDIR: - return S_ISDIR(s.st_mode); - case FILCDEV: - return S_ISCHR(s.st_mode); - case FILBDEV: - return S_ISBLK(s.st_mode); - case FILFIFO: - return S_ISFIFO(s.st_mode); - case FILSOCK: - return S_ISSOCK(s.st_mode); - case FILSYM: - return S_ISLNK(s.st_mode); - case FILSUID: - return (s.st_mode & S_ISUID) != 0; - case FILSGID: - return (s.st_mode & S_ISGID) != 0; - case FILSTCK: - return (s.st_mode & S_ISVTX) != 0; - case FILGZ: - return s.st_size > (off_t)0; - case FILUID: - return s.st_uid == geteuid(); - case FILGID: - return s.st_gid == getegid(); - default: - return 1; - } -} - -static int -find_op_1char(const struct t_op *op, const struct t_op *end, const char *s) -{ - char c; - - c = s[0]; - while (op != end) { - if (c == *op->op_text) - return op->op_num; - op++; - } - return OPERAND; -} - -static int -find_op_2char(const struct t_op *op, const struct t_op *end, const char *s) -{ - while (op != end) { - if (s[0] == op->op_text[0] && s[1] == op->op_text[1]) - return op->op_num; - op++; - } - return OPERAND; -} - -static int -find_op(const char *s) -{ - if (s[0] == '\0') - return OPERAND; - else if (s[1] == '\0') - return find_op_1char(ops1, (&ops1)[1], s); - else if (s[2] == '\0') - return s[0] == '-' ? find_op_1char(opsm1, (&opsm1)[1], s + 1) : - find_op_2char(ops2, (&ops2)[1], s); - else if (s[3] == '\0') - return s[0] == '-' ? find_op_2char(opsm2, (&opsm2)[1], s + 1) : - OPERAND; - else - return OPERAND; -} - -static enum token -t_lex(char *s) -{ - int num; - - if (s == NULL) { - return EOI; - } - num = find_op(s); - if (((TOKEN_TYPE(num) == UNOP || TOKEN_TYPE(num) == BUNOP) - && isunopoperand()) || - (num == LPAREN && islparenoperand()) || - (num == RPAREN && isrparenoperand())) - return OPERAND; - return num; -} - -static int -isunopoperand(void) -{ - char *s; - char *t; - int num; - - if (nargc == 1) - return 1; - s = *(t_wp + 1); - if (nargc == 2) - return parenlevel == 1 && strcmp(s, ")") == 0; - t = *(t_wp + 2); - num = find_op(s); - return TOKEN_TYPE(num) == BINOP && - (parenlevel == 0 || t[0] != ')' || t[1] != '\0'); -} - -static int -islparenoperand(void) -{ - char *s; - int num; - - if (nargc == 1) - return 1; - s = *(t_wp + 1); - if (nargc == 2) - return parenlevel == 1 && strcmp(s, ")") == 0; - if (nargc != 3) - return 0; - num = find_op(s); - return TOKEN_TYPE(num) == BINOP; -} - -static int -isrparenoperand(void) -{ - char *s; - - if (nargc == 1) - return 0; - s = *(t_wp + 1); - if (nargc == 2) - return parenlevel == 1 && strcmp(s, ")") == 0; - return 0; -} - -/* atoi with error detection */ -static int -getn(const char *s) -{ - char *p; - long r; - - errno = 0; - r = strtol(s, &p, 10); - - if (s == p) - error("%s: bad number", s); - - if (errno != 0) - error((errno == EINVAL) ? "%s: bad number" : - "%s: out of range", s); - - while (isspace((unsigned char)*p)) - p++; - - if (*p) - error("%s: bad number", s); - - return (int) r; -} - -/* atoi with error detection and 64 bit range */ -static intmax_t -getq(const char *s) -{ - char *p; - intmax_t r; - - errno = 0; - r = strtoimax(s, &p, 10); - - if (s == p) - error("%s: bad number", s); - - if (errno != 0) - error((errno == EINVAL) ? "%s: bad number" : - "%s: out of range", s); - - while (isspace((unsigned char)*p)) - p++; - - if (*p) - error("%s: bad number", s); - - return r; -} - -static int -intcmp (const char *s1, const char *s2) -{ - intmax_t q1, q2; - - - q1 = getq(s1); - q2 = getq(s2); - - if (q1 > q2) - return 1; - - if (q1 < q2) - return -1; - - return 0; -} - -static int -newerf (const char *f1, const char *f2) -{ - struct stat b1, b2; - - if (stat(f1, &b1) != 0 || stat(f2, &b2) != 0) - return 0; - - if (b1.st_mtimespec.tv_sec > b2.st_mtimespec.tv_sec) - return 1; - if (b1.st_mtimespec.tv_sec < b2.st_mtimespec.tv_sec) - return 0; - - return (b1.st_mtimespec.tv_nsec > b2.st_mtimespec.tv_nsec); -} - -static int -olderf (const char *f1, const char *f2) -{ - return (newerf(f2, f1)); -} - -static int -equalf (const char *f1, const char *f2) -{ - struct stat b1, b2; - - return (stat (f1, &b1) == 0 && - stat (f2, &b2) == 0 && - b1.st_dev == b2.st_dev && - b1.st_ino == b2.st_ino); -} diff --git a/bin/1sh/trap.c b/bin/1sh/trap.c deleted file mode 100644 index 93c063e1..00000000 --- a/bin/1sh/trap.c +++ /dev/null @@ -1,553 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)trap.c 8.5 (Berkeley) 6/5/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/trap.c 326025 2017-11-20 19:49:47Z pfg $"); - -#include <signal.h> -#include <unistd.h> -#include <stdlib.h> - -#include "shell.h" -#include "main.h" -#include "nodes.h" /* for other headers */ -#include "eval.h" -#include "jobs.h" -#include "show.h" -#include "options.h" -#include "syntax.h" -#include "output.h" -#include "memalloc.h" -#include "error.h" -#include "trap.h" -#include "mystring.h" -#include "builtins.h" -#include "myhistedit.h" - - -/* - * Sigmode records the current value of the signal handlers for the various - * modes. A value of zero means that the current handler is not known. - * S_HARD_IGN indicates that the signal was ignored on entry to the shell, - */ - -#define S_DFL 1 /* default signal handling (SIG_DFL) */ -#define S_CATCH 2 /* signal is caught */ -#define S_IGN 3 /* signal is ignored (SIG_IGN) */ -#define S_HARD_IGN 4 /* signal is ignored permanently */ -#define S_RESET 5 /* temporary - to reset a hard ignored sig */ - - -static char sigmode[NSIG]; /* current value of signal */ -volatile sig_atomic_t pendingsig; /* indicates some signal received */ -volatile sig_atomic_t pendingsig_waitcmd; /* indicates wait builtin should be interrupted */ -static int in_dotrap; /* do we execute in a trap handler? */ -static char *volatile trap[NSIG]; /* trap handler commands */ -static volatile sig_atomic_t gotsig[NSIG]; - /* indicates specified signal received */ -static int ignore_sigchld; /* Used while handling SIGCHLD traps. */ -static int last_trapsig; - -static int exiting; /* exitshell() has been called */ -static int exiting_exitstatus; /* value passed to exitshell() */ - -static int getsigaction(int, sig_t *); - - -/* - * Map a string to a signal number. - * - * Note: the signal number may exceed NSIG. - */ -static int -sigstring_to_signum(char *sig) -{ - - if (is_number(sig)) { - int signo; - - signo = atoi(sig); - return ((signo >= 0 && signo < NSIG) ? signo : (-1)); - } else if (strcasecmp(sig, "EXIT") == 0) { - return (0); - } else { - int n; - - if (strncasecmp(sig, "SIG", 3) == 0) - sig += 3; - for (n = 1; n < NSIG; n++) - if (sys_signame[n] && - strcasecmp(sys_signame[n], sig) == 0) - return (n); - } - return (-1); -} - - -/* - * Print a list of valid signal names. - */ -static void -printsignals(void) -{ - int n, outlen; - - outlen = 0; - for (n = 1; n < NSIG; n++) { - if (sys_signame[n]) { - out1fmt("%s", sys_signame[n]); - outlen += strlen(sys_signame[n]); - } else { - out1fmt("%d", n); - outlen += 3; /* good enough */ - } - ++outlen; - if (outlen > 71 || n == NSIG - 1) { - out1str("\n"); - outlen = 0; - } else { - out1c(' '); - } - } -} - - -/* - * The trap builtin. - */ -int -trapcmd(int argc __unused, char **argv) -{ - char *action; - int signo; - int errors = 0; - int i; - - while ((i = nextopt("l")) != '\0') { - switch (i) { - case 'l': - printsignals(); - return (0); - } - } - argv = argptr; - - if (*argv == NULL) { - for (signo = 0 ; signo < NSIG ; signo++) { - if (signo < NSIG && trap[signo] != NULL) { - out1str("trap -- "); - out1qstr(trap[signo]); - if (signo == 0) { - out1str(" EXIT\n"); - } else if (sys_signame[signo]) { - out1fmt(" %s\n", sys_signame[signo]); - } else { - out1fmt(" %d\n", signo); - } - } - } - return 0; - } - action = NULL; - if (*argv && !is_number(*argv)) { - if (strcmp(*argv, "-") == 0) - argv++; - else { - action = *argv; - argv++; - } - } - for (; *argv; argv++) { - if ((signo = sigstring_to_signum(*argv)) == -1) { - warning("bad signal %s", *argv); - errors = 1; - continue; - } - INTOFF; - if (action) - action = savestr(action); - if (trap[signo]) - ckfree(trap[signo]); - trap[signo] = action; - if (signo != 0) - setsignal(signo); - INTON; - } - return errors; -} - - -/* - * Clear traps on a fork. - */ -void -clear_traps(void) -{ - char *volatile *tp; - - for (tp = trap ; tp <= &trap[NSIG - 1] ; tp++) { - if (*tp && **tp) { /* trap not NULL or SIG_IGN */ - INTOFF; - ckfree(*tp); - *tp = NULL; - if (tp != &trap[0]) - setsignal(tp - trap); - INTON; - } - } -} - - -/* - * Check if we have any traps enabled. - */ -int -have_traps(void) -{ - char *volatile *tp; - - for (tp = trap ; tp <= &trap[NSIG - 1] ; tp++) { - if (*tp && **tp) /* trap not NULL or SIG_IGN */ - return 1; - } - return 0; -} - -/* - * Set the signal handler for the specified signal. The routine figures - * out what it should be set to. - */ -void -setsignal(int signo) -{ - int action; - sig_t sigact = SIG_DFL; - struct sigaction sa; - char *t; - - if ((t = trap[signo]) == NULL) - action = S_DFL; - else if (*t != '\0') - action = S_CATCH; - else - action = S_IGN; - if (action == S_DFL) { - switch (signo) { - case SIGINT: - action = S_CATCH; - break; - case SIGQUIT: -#ifdef DEBUG - { - extern int debug; - - if (debug) - break; - } -#endif - action = S_CATCH; - break; - case SIGTERM: - if (rootshell && iflag) - action = S_IGN; - break; -#if JOBS - case SIGTSTP: - case SIGTTOU: - if (rootshell && mflag) - action = S_IGN; - break; -#endif - } - } - - t = &sigmode[signo]; - if (*t == 0) { - /* - * current setting unknown - */ - if (!getsigaction(signo, &sigact)) { - /* - * Pretend it worked; maybe we should give a warning - * here, but other shells don't. We don't alter - * sigmode, so that we retry every time. - */ - return; - } - if (sigact == SIG_IGN) { - if (mflag && (signo == SIGTSTP || - signo == SIGTTIN || signo == SIGTTOU)) { - *t = S_IGN; /* don't hard ignore these */ - } else - *t = S_HARD_IGN; - } else { - *t = S_RESET; /* force to be set */ - } - } - if (*t == S_HARD_IGN || *t == action) - return; - switch (action) { - case S_DFL: sigact = SIG_DFL; break; - case S_CATCH: sigact = onsig; break; - case S_IGN: sigact = SIG_IGN; break; - } - *t = action; - sa.sa_handler = sigact; - sa.sa_flags = 0; - sigemptyset(&sa.sa_mask); - sigaction(signo, &sa, NULL); -} - - -/* - * Return the current setting for sig w/o changing it. - */ -static int -getsigaction(int signo, sig_t *sigact) -{ - struct sigaction sa; - - if (sigaction(signo, (struct sigaction *)0, &sa) == -1) - return 0; - *sigact = (sig_t) sa.sa_handler; - return 1; -} - - -/* - * Ignore a signal. - */ -void -ignoresig(int signo) -{ - - if (sigmode[signo] == 0) - setsignal(signo); - if (sigmode[signo] != S_IGN && sigmode[signo] != S_HARD_IGN) { - signal(signo, SIG_IGN); - sigmode[signo] = S_IGN; - } -} - - -int -issigchldtrapped(void) -{ - - return (trap[SIGCHLD] != NULL && *trap[SIGCHLD] != '\0'); -} - - -/* - * Signal handler. - */ -void -onsig(int signo) -{ - - if (signo == SIGINT && trap[SIGINT] == NULL) { - /* - * The !in_dotrap here is safe. The only way we can arrive - * here with in_dotrap set is that a trap handler set SIGINT to - * SIG_DFL and killed itself. - */ - if (suppressint && !in_dotrap) - SET_PENDING_INT; - else - onint(); - return; - } - - /* If we are currently in a wait builtin, prepare to break it */ - if (signo == SIGINT || signo == SIGQUIT) - pendingsig_waitcmd = signo; - - if (trap[signo] != NULL && trap[signo][0] != '\0' && - (signo != SIGCHLD || !ignore_sigchld)) { - gotsig[signo] = 1; - pendingsig = signo; - pendingsig_waitcmd = signo; - } -} - - -/* - * Called to execute a trap. Perhaps we should avoid entering new trap - * handlers while we are executing a trap handler. - */ -void -dotrap(void) -{ - struct stackmark smark; - int i; - int savestatus, prev_evalskip, prev_skipcount; - - in_dotrap++; - for (;;) { - pendingsig = 0; - pendingsig_waitcmd = 0; - for (i = 1; i < NSIG; i++) { - if (gotsig[i]) { - gotsig[i] = 0; - if (trap[i]) { - /* - * Ignore SIGCHLD to avoid infinite - * recursion if the trap action does - * a fork. - */ - if (i == SIGCHLD) - ignore_sigchld++; - - /* - * Backup current evalskip - * state and reset it before - * executing a trap, so that the - * trap is not disturbed by an - * ongoing break/continue/return - * statement. - */ - prev_evalskip = evalskip; - prev_skipcount = skipcount; - evalskip = 0; - - last_trapsig = i; - savestatus = exitstatus; - setstackmark(&smark); - evalstring(stsavestr(trap[i]), 0); - popstackmark(&smark); - - /* - * If such a command was not - * already in progress, allow a - * break/continue/return in the - * trap action to have an effect - * outside of it. - */ - if (evalskip == 0 || - prev_evalskip != 0) { - evalskip = prev_evalskip; - skipcount = prev_skipcount; - exitstatus = savestatus; - } - - if (i == SIGCHLD) - ignore_sigchld--; - } - break; - } - } - if (i >= NSIG) - break; - } - in_dotrap--; -} - - -/* - * Controls whether the shell is interactive or not based on iflag. - */ -void -setinteractive(void) -{ - setsignal(SIGINT); - setsignal(SIGQUIT); - setsignal(SIGTERM); -} - - -/* - * Called to exit the shell. - */ -void -exitshell(int status) -{ - TRACE(("exitshell(%d) pid=%d\n", status, getpid())); - exiting = 1; - exiting_exitstatus = status; - exitshell_savedstatus(); -} - -void -exitshell_savedstatus(void) -{ - struct jmploc loc1, loc2; - char *p; - int sig = 0; - sigset_t sigs; - - if (!exiting) { - if (in_dotrap && last_trapsig) { - sig = last_trapsig; - exiting_exitstatus = sig + 128; - } else - exiting_exitstatus = oexitstatus; - } - exitstatus = oexitstatus = exiting_exitstatus; - if (!setjmp(loc1.loc)) { - handler = &loc1; - if ((p = trap[0]) != NULL && *p != '\0') { - /* - * Reset evalskip, or the trap on EXIT could be - * interrupted if the last command was a "return". - */ - evalskip = 0; - trap[0] = NULL; - FORCEINTON; - evalstring(p, 0); - } - } - if (!setjmp(loc2.loc)) { - handler = &loc2; /* probably unnecessary */ - FORCEINTON; - flushall(); -#if JOBS - setjobctl(0); -#endif - } - if (sig != 0 && sig != SIGSTOP && sig != SIGTSTP && sig != SIGTTIN && - sig != SIGTTOU) { - signal(sig, SIG_DFL); - sigemptyset(&sigs); - sigaddset(&sigs, sig); - sigprocmask(SIG_UNBLOCK, &sigs, NULL); - kill(getpid(), sig); - /* If the default action is to ignore, fall back to _exit(). */ - } - _exit(exiting_exitstatus); -} diff --git a/bin/1sh/trap.h b/bin/1sh/trap.h deleted file mode 100644 index 2898c594..00000000 --- a/bin/1sh/trap.h +++ /dev/null @@ -1,50 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)trap.h 8.3 (Berkeley) 6/5/95 - * $FreeBSD: releng/12.0/bin/sh/trap.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -extern volatile sig_atomic_t pendingsig; -extern volatile sig_atomic_t pendingsig_waitcmd; - -void clear_traps(void); -int have_traps(void); -void setsignal(int); -void ignoresig(int); -int issigchldtrapped(void); -void onsig(int); -void dotrap(void); -void setinteractive(void); -void exitshell(int) __dead2; -void exitshell_savedstatus(void) __dead2; diff --git a/bin/1sh/var.c b/bin/1sh/var.c deleted file mode 100644 index 2c006c0e..00000000 --- a/bin/1sh/var.c +++ /dev/null @@ -1,973 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef lint -#if 0 -static char sccsid[] = "@(#)var.c 8.3 (Berkeley) 5/4/95"; -#endif -#endif /* not lint */ -#include <sys/cdefs.h> -__FBSDID("$FreeBSD: releng/12.0/bin/sh/var.c 329221 2018-02-13 16:48:57Z bdrewery $"); - -#include <unistd.h> -#include <stdlib.h> -#include <paths.h> - -/* - * Shell variables. - */ - -#include <locale.h> -#include <langinfo.h> - -#include "shell.h" -#include "output.h" -#include "expand.h" -#include "nodes.h" /* for other headers */ -#include "eval.h" /* defines cmdenviron */ -#include "exec.h" -#include "syntax.h" -#include "options.h" -#include "mail.h" -#include "var.h" -#include "memalloc.h" -#include "error.h" -#include "mystring.h" -#include "parser.h" -#include "builtins.h" -#ifndef NO_HISTORY -#include "myhistedit.h" -#endif - - -#ifndef VTABSIZE -#define VTABSIZE 39 -#endif - - -struct varinit { - struct var *var; - int flags; - const char *text; - void (*func)(const char *); -}; - - -#ifndef NO_HISTORY -struct var vhistfile; -struct var vhistsize; -struct var vterm; -#endif -struct var vifs; -struct var vmail; -struct var vmpath; -struct var vpath; -struct var vps0; -struct var vps1; -struct var vps2; -struct var vps4; -struct var vrps1; -struct var vrps2; -static struct var voptind; -struct var vdisvfork; - -struct localvar *localvars; -int forcelocal; - -static const struct varinit varinit[] = { -#ifndef NO_HISTORY - { &vhistfile, VUNSET, "HISTFILE=", - sethistfile }, - { &vhistsize, VUNSET, "HISTSIZE=", - sethistsize }, -#endif - { &vifs, 0, "IFS= \t\n", - NULL }, - { &vmail, VUNSET, "MAIL=", - NULL }, - { &vmpath, VUNSET, "MAILPATH=", - NULL }, - { &vpath, 0, "PATH=" _PATH_DEFPATH, - changepath }, - { &vps0, VUNSET, "PS0=", - NULL }, - { &vps1, 0, "PS1=\\$ ", - NULL }, - { &vps2, 0, "PS2=> ", - NULL }, - { &vps4, 0, "PS4=+ ", - NULL }, - { &vrps1, VUNSET, "RPS1=", - NULL }, - { &vrps2, VUNSET, "RPS2=", - NULL }, -#ifndef NO_HISTORY - { &vterm, VUNSET, "TERM=", - setterm }, -#endif - { &voptind, 0, "OPTIND=1", - getoptsreset }, - { &vdisvfork, VUNSET, "SH_DISABLE_VFORK=", - NULL }, - { NULL, 0, NULL, - NULL } -}; - -static struct var *vartab[VTABSIZE]; - -static const char *const locale_names[7] = { - "LC_COLLATE", "LC_CTYPE", "LC_MONETARY", - "LC_NUMERIC", "LC_TIME", "LC_MESSAGES", NULL -}; -static const int locale_categories[7] = { - LC_COLLATE, LC_CTYPE, LC_MONETARY, LC_NUMERIC, LC_TIME, LC_MESSAGES, 0 -}; - -static int varequal(const char *, const char *); -static struct var *find_var(const char *, struct var ***, int *); -static int localevar(const char *); -static void setvareq_const(const char *s, int flags); - -extern char **environ; - -/* - * This routine initializes the builtin variables and imports the environment. - * It is called when the shell is initialized. - */ - -void -initvar(void) -{ - char ppid[20]; - const struct varinit *ip; - struct var *vp; - struct var **vpp; - char **envp; - - for (ip = varinit ; (vp = ip->var) != NULL ; ip++) { - if (find_var(ip->text, &vpp, &vp->name_len) != NULL) - continue; - vp->next = *vpp; - *vpp = vp; - vp->text = __DECONST(char *, ip->text); - vp->flags = ip->flags | VSTRFIXED | VTEXTFIXED; - vp->func = ip->func; - } - fmtstr(ppid, sizeof(ppid), "%d", (int)getppid()); - setvarsafe("PPID", ppid, 0); - for (envp = environ ; *envp ; envp++) { - if (strchr(*envp, '=')) { - setvareq(*envp, VEXPORT|VTEXTFIXED); - } - } - setvareq_const("OPTIND=1", 0); - setvareq_const("IFS= \t\n", 0); -} - -/* - * Safe version of setvar, returns 1 on success 0 on failure. - */ - -int -setvarsafe(const char *name, const char *val, int flags) -{ - struct jmploc jmploc; - struct jmploc *const savehandler = handler; - int err = 0; - int inton; - - inton = is_int_on(); - if (setjmp(jmploc.loc)) - err = 1; - else { - handler = &jmploc; - setvar(name, val, flags); - } - handler = savehandler; - SETINTON(inton); - return err; -} - -/* - * Set the value of a variable. The flags argument is stored with the - * flags of the variable. If val is NULL, the variable is unset. - */ - -void -setvar(const char *name, const char *val, int flags) -{ - const char *p; - size_t len; - size_t namelen; - size_t vallen; - char *nameeq; - int isbad; - - isbad = 0; - p = name; - if (! is_name(*p)) - isbad = 1; - p++; - for (;;) { - if (! is_in_name(*p)) { - if (*p == '\0' || *p == '=') - break; - isbad = 1; - } - p++; - } - namelen = p - name; - if (isbad) - error("%.*s: bad variable name", (int)namelen, name); - len = namelen + 2; /* 2 is space for '=' and '\0' */ - if (val == NULL) { - flags |= VUNSET; - vallen = 0; - } else { - vallen = strlen(val); - len += vallen; - } - INTOFF; - nameeq = ckmalloc(len); - memcpy(nameeq, name, namelen); - nameeq[namelen] = '='; - if (val) - memcpy(nameeq + namelen + 1, val, vallen + 1); - else - nameeq[namelen + 1] = '\0'; - setvareq(nameeq, flags); - INTON; -} - -static int -localevar(const char *s) -{ - const char *const *ss; - - if (*s != 'L') - return 0; - if (varequal(s + 1, "ANG")) - return 1; - if (strncmp(s + 1, "C_", 2) != 0) - return 0; - if (varequal(s + 3, "ALL")) - return 1; - for (ss = locale_names; *ss ; ss++) - if (varequal(s + 3, *ss + 3)) - return 1; - return 0; -} - - -/* - * Sets/unsets an environment variable from a pointer that may actually be a - * pointer into environ where the string should not be manipulated. - */ -static void -change_env(const char *s, int set) -{ - char *eqp; - char *ss; - - INTOFF; - ss = savestr(s); - if ((eqp = strchr(ss, '=')) != NULL) - *eqp = '\0'; - if (set && eqp != NULL) - (void) setenv(ss, eqp + 1, 1); - else - (void) unsetenv(ss); - ckfree(ss); - INTON; - - return; -} - - -/* - * Same as setvar except that the variable and value are passed in - * the first argument as name=value. Since the first argument will - * be actually stored in the table, it should not be a string that - * will go away. - */ - -void -setvareq(char *s, int flags) -{ - struct var *vp, **vpp; - int nlen; - - if (aflag) - flags |= VEXPORT; - if (forcelocal && !(flags & (VNOSET | VNOLOCAL))) - mklocal(s); - vp = find_var(s, &vpp, &nlen); - if (vp != NULL) { - if (vp->flags & VREADONLY) { - if ((flags & (VTEXTFIXED|VSTACK)) == 0) - ckfree(s); - error("%.*s: is read only", vp->name_len, vp->text); - } - if (flags & VNOSET) { - if ((flags & (VTEXTFIXED|VSTACK)) == 0) - ckfree(s); - return; - } - INTOFF; - - if (vp->func && (flags & VNOFUNC) == 0) - (*vp->func)(s + vp->name_len + 1); - - if ((vp->flags & (VTEXTFIXED|VSTACK)) == 0) - ckfree(vp->text); - - vp->flags &= ~(VTEXTFIXED|VSTACK|VUNSET); - vp->flags |= flags; - vp->text = s; - - /* - * We could roll this to a function, to handle it as - * a regular variable function callback, but why bother? - * - * Note: this assumes iflag is not set to 1 initially. - * As part of initvar(), this is called before arguments - * are looked at. - */ - if ((vp == &vmpath || (vp == &vmail && ! mpathset())) && - iflag == 1) - chkmail(1); - if ((vp->flags & VEXPORT) && localevar(s)) { - change_env(s, 1); - (void) setlocale(LC_ALL, ""); - updatecharset(); - } - INTON; - return; - } - /* not found */ - if (flags & VNOSET) { - if ((flags & (VTEXTFIXED|VSTACK)) == 0) - ckfree(s); - return; - } - INTOFF; - vp = ckmalloc(sizeof (*vp)); - vp->flags = flags; - vp->text = s; - vp->name_len = nlen; - vp->next = *vpp; - vp->func = NULL; - *vpp = vp; - if ((vp->flags & VEXPORT) && localevar(s)) { - change_env(s, 1); - (void) setlocale(LC_ALL, ""); - updatecharset(); - } - INTON; -} - - -static void -setvareq_const(const char *s, int flags) -{ - setvareq(__DECONST(char *, s), flags | VTEXTFIXED); -} - - -/* - * Process a linked list of variable assignments. - */ - -void -listsetvar(struct arglist *list, int flags) -{ - int i; - - INTOFF; - for (i = 0; i < list->count; i++) - setvareq(savestr(list->args[i]), flags); - INTON; -} - - - -/* - * Find the value of a variable. Returns NULL if not set. - */ - -char * -lookupvar(const char *name) -{ - struct var *v; - - v = find_var(name, NULL, NULL); - if (v == NULL || v->flags & VUNSET) - return NULL; - return v->text + v->name_len + 1; -} - - - -/* - * Search the environment of a builtin command. If the second argument - * is nonzero, return the value of a variable even if it hasn't been - * exported. - */ - -char * -bltinlookup(const char *name, int doall) -{ - struct var *v; - char *result; - int i; - - result = NULL; - if (cmdenviron) for (i = 0; i < cmdenviron->count; i++) { - if (varequal(cmdenviron->args[i], name)) - result = strchr(cmdenviron->args[i], '=') + 1; - } - if (result != NULL) - return result; - - v = find_var(name, NULL, NULL); - if (v == NULL || v->flags & VUNSET || - (!doall && (v->flags & VEXPORT) == 0)) - return NULL; - return v->text + v->name_len + 1; -} - - -/* - * Set up locale for a builtin (LANG/LC_* assignments). - */ -void -bltinsetlocale(void) -{ - int act = 0; - char *loc, *locdef; - int i; - - if (cmdenviron) for (i = 0; i < cmdenviron->count; i++) { - if (localevar(cmdenviron->args[i])) { - act = 1; - break; - } - } - if (!act) - return; - loc = bltinlookup("LC_ALL", 0); - INTOFF; - if (loc != NULL) { - setlocale(LC_ALL, loc); - INTON; - updatecharset(); - return; - } - locdef = bltinlookup("LANG", 0); - for (i = 0; locale_names[i] != NULL; i++) { - loc = bltinlookup(locale_names[i], 0); - if (loc == NULL) - loc = locdef; - if (loc != NULL) - setlocale(locale_categories[i], loc); - } - INTON; - updatecharset(); -} - -/* - * Undo the effect of bltinlocaleset(). - */ -void -bltinunsetlocale(void) -{ - int i; - - INTOFF; - if (cmdenviron) for (i = 0; i < cmdenviron->count; i++) { - if (localevar(cmdenviron->args[i])) { - setlocale(LC_ALL, ""); - updatecharset(); - break; - } - } - INTON; -} - -/* - * Update the localeisutf8 flag. - */ -void -updatecharset(void) -{ - char *charset; - - charset = nl_langinfo(CODESET); - localeisutf8 = !strcmp(charset, "UTF-8"); -} - -void -initcharset(void) -{ - updatecharset(); - initial_localeisutf8 = localeisutf8; -} - -/* - * Generate a list of exported variables. This routine is used to construct - * the third argument to execve when executing a program. - */ - -char ** -environment(void) -{ - int nenv; - struct var **vpp; - struct var *vp; - char **env, **ep; - - nenv = 0; - for (vpp = vartab ; vpp < vartab + VTABSIZE ; vpp++) { - for (vp = *vpp ; vp ; vp = vp->next) - if (vp->flags & VEXPORT) - nenv++; - } - ep = env = stalloc((nenv + 1) * sizeof *env); - for (vpp = vartab ; vpp < vartab + VTABSIZE ; vpp++) { - for (vp = *vpp ; vp ; vp = vp->next) - if (vp->flags & VEXPORT) - *ep++ = vp->text; - } - *ep = NULL; - return env; -} - - -static int -var_compare(const void *a, const void *b) -{ - const char *const *sa, *const *sb; - - sa = a; - sb = b; - /* - * This compares two var=value strings which creates a different - * order from what you would probably expect. POSIX is somewhat - * ambiguous on what should be sorted exactly. - */ - return strcoll(*sa, *sb); -} - - -/* - * Command to list all variables which are set. This is invoked from the - * set command when it is called without any options or operands. - */ - -int -showvarscmd(int argc __unused, char **argv __unused) -{ - struct var **vpp; - struct var *vp; - const char *s; - const char **vars; - int i, n; - - /* - * POSIX requires us to sort the variables. - */ - n = 0; - for (vpp = vartab; vpp < vartab + VTABSIZE; vpp++) { - for (vp = *vpp; vp; vp = vp->next) { - if (!(vp->flags & VUNSET)) - n++; - } - } - - INTOFF; - vars = ckmalloc(n * sizeof(*vars)); - i = 0; - for (vpp = vartab; vpp < vartab + VTABSIZE; vpp++) { - for (vp = *vpp; vp; vp = vp->next) { - if (!(vp->flags & VUNSET)) - vars[i++] = vp->text; - } - } - - qsort(vars, n, sizeof(*vars), var_compare); - for (i = 0; i < n; i++) { - /* - * Skip improper variable names so the output remains usable as - * shell input. - */ - if (!isassignment(vars[i])) - continue; - s = strchr(vars[i], '='); - s++; - outbin(vars[i], s - vars[i], out1); - out1qstr(s); - out1c('\n'); - } - ckfree(vars); - INTON; - - return 0; -} - - - -/* - * The export and readonly commands. - */ - -int -exportcmd(int argc __unused, char **argv) -{ - struct var **vpp; - struct var *vp; - char **ap; - char *name; - char *p; - char *cmdname; - int ch, values; - int flag = argv[0][0] == 'r'? VREADONLY : VEXPORT; - - cmdname = argv[0]; - values = 0; - while ((ch = nextopt("p")) != '\0') { - switch (ch) { - case 'p': - values = 1; - break; - } - } - - if (values && *argptr != NULL) - error("-p requires no arguments"); - if (*argptr != NULL) { - for (ap = argptr; (name = *ap) != NULL; ap++) { - if ((p = strchr(name, '=')) != NULL) { - p++; - } else { - vp = find_var(name, NULL, NULL); - if (vp != NULL) { - vp->flags |= flag; - if ((vp->flags & VEXPORT) && localevar(vp->text)) { - change_env(vp->text, 1); - (void) setlocale(LC_ALL, ""); - updatecharset(); - } - continue; - } - } - setvar(name, p, flag); - } - } else { - for (vpp = vartab ; vpp < vartab + VTABSIZE ; vpp++) { - for (vp = *vpp ; vp ; vp = vp->next) { - if (vp->flags & flag) { - if (values) { - /* - * Skip improper variable names - * so the output remains usable - * as shell input. - */ - if (!isassignment(vp->text)) - continue; - out1str(cmdname); - out1c(' '); - } - if (values && !(vp->flags & VUNSET)) { - outbin(vp->text, - vp->name_len + 1, out1); - out1qstr(vp->text + - vp->name_len + 1); - } else - outbin(vp->text, vp->name_len, - out1); - out1c('\n'); - } - } - } - } - return 0; -} - - -/* - * The "local" command. - */ - -int -localcmd(int argc __unused, char **argv __unused) -{ - char *name; - - nextopt(""); - if (! in_function()) - error("Not in a function"); - while ((name = *argptr++) != NULL) { - mklocal(name); - } - return 0; -} - - -/* - * Make a variable a local variable. When a variable is made local, it's - * value and flags are saved in a localvar structure. The saved values - * will be restored when the shell function returns. We handle the name - * "-" as a special case. - */ - -void -mklocal(char *name) -{ - struct localvar *lvp; - struct var **vpp; - struct var *vp; - - INTOFF; - lvp = ckmalloc(sizeof (struct localvar)); - if (name[0] == '-' && name[1] == '\0') { - lvp->text = ckmalloc(sizeof optval); - memcpy(lvp->text, optval, sizeof optval); - vp = NULL; - } else { - vp = find_var(name, &vpp, NULL); - if (vp == NULL) { - if (strchr(name, '=')) - setvareq(savestr(name), VSTRFIXED | VNOLOCAL); - else - setvar(name, NULL, VSTRFIXED | VNOLOCAL); - vp = *vpp; /* the new variable */ - lvp->text = NULL; - lvp->flags = VUNSET; - } else { - lvp->text = vp->text; - lvp->flags = vp->flags; - vp->flags |= VSTRFIXED|VTEXTFIXED; - if (name[vp->name_len] == '=') - setvareq(savestr(name), VNOLOCAL); - } - } - lvp->vp = vp; - lvp->next = localvars; - localvars = lvp; - INTON; -} - - -/* - * Called after a function returns. - */ - -void -poplocalvars(void) -{ - struct localvar *lvp; - struct var *vp; - int islocalevar; - - INTOFF; - while ((lvp = localvars) != NULL) { - localvars = lvp->next; - vp = lvp->vp; - if (vp == NULL) { /* $- saved */ - memcpy(optval, lvp->text, sizeof optval); - ckfree(lvp->text); - optschanged(); - } else if ((lvp->flags & (VUNSET|VSTRFIXED)) == VUNSET) { - vp->flags &= ~VREADONLY; - (void)unsetvar(vp->text); - } else { - islocalevar = (vp->flags | lvp->flags) & VEXPORT && - localevar(lvp->text); - if ((vp->flags & VTEXTFIXED) == 0) - ckfree(vp->text); - vp->flags = lvp->flags; - vp->text = lvp->text; - if (vp->func) - (*vp->func)(vp->text + vp->name_len + 1); - if (islocalevar) { - change_env(vp->text, vp->flags & VEXPORT && - (vp->flags & VUNSET) == 0); - setlocale(LC_ALL, ""); - updatecharset(); - } - } - ckfree(lvp); - } - INTON; -} - - -int -setvarcmd(int argc, char **argv) -{ - if (argc <= 2) - return unsetcmd(argc, argv); - else if (argc == 3) - setvar(argv[1], argv[2], 0); - else - error("too many arguments"); - return 0; -} - - -/* - * The unset builtin command. - */ - -int -unsetcmd(int argc __unused, char **argv __unused) -{ - char **ap; - int i; - int flg_func = 0; - int flg_var = 0; - int ret = 0; - - while ((i = nextopt("vf")) != '\0') { - if (i == 'f') - flg_func = 1; - else - flg_var = 1; - } - if (flg_func == 0 && flg_var == 0) - flg_var = 1; - - INTOFF; - for (ap = argptr; *ap ; ap++) { - if (flg_func) - ret |= unsetfunc(*ap); - if (flg_var) - ret |= unsetvar(*ap); - } - INTON; - return ret; -} - - -/* - * Unset the specified variable. - * Called with interrupts off. - */ - -int -unsetvar(const char *s) -{ - struct var **vpp; - struct var *vp; - - vp = find_var(s, &vpp, NULL); - if (vp == NULL) - return (0); - if (vp->flags & VREADONLY) - return (1); - if (vp->text[vp->name_len + 1] != '\0') - setvar(s, "", 0); - if ((vp->flags & VEXPORT) && localevar(vp->text)) { - change_env(s, 0); - setlocale(LC_ALL, ""); - updatecharset(); - } - vp->flags &= ~VEXPORT; - vp->flags |= VUNSET; - if ((vp->flags & VSTRFIXED) == 0) { - if ((vp->flags & VTEXTFIXED) == 0) - ckfree(vp->text); - *vpp = vp->next; - ckfree(vp); - } - return (0); -} - - - -/* - * Returns true if the two strings specify the same variable. The first - * variable name is terminated by '='; the second may be terminated by - * either '=' or '\0'. - */ - -static int -varequal(const char *p, const char *q) -{ - while (*p == *q++) { - if (*p++ == '=') - return 1; - } - if (*p == '=' && *(q - 1) == '\0') - return 1; - return 0; -} - -/* - * Search for a variable. - * 'name' may be terminated by '=' or a NUL. - * vppp is set to the pointer to vp, or the list head if vp isn't found - * lenp is set to the number of characters in 'name' - */ - -static struct var * -find_var(const char *name, struct var ***vppp, int *lenp) -{ - unsigned int hashval; - int len; - struct var *vp, **vpp; - const char *p = name; - - hashval = 0; - while (*p && *p != '=') - hashval = 2 * hashval + (unsigned char)*p++; - len = p - name; - - if (lenp) - *lenp = len; - vpp = &vartab[hashval % VTABSIZE]; - if (vppp) - *vppp = vpp; - - for (vp = *vpp ; vp ; vpp = &vp->next, vp = *vpp) { - if (vp->name_len != len) - continue; - if (memcmp(vp->text, name, len) != 0) - continue; - if (vppp) - *vppp = vpp; - return vp; - } - return NULL; -} diff --git a/bin/1sh/var.h b/bin/1sh/var.h deleted file mode 100644 index 1e6420fd..00000000 --- a/bin/1sh/var.h +++ /dev/null @@ -1,140 +0,0 @@ -/*- - * SPDX-License-Identifier: BSD-3-Clause - * - * Copyright (c) 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Kenneth Almquist. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)var.h 8.2 (Berkeley) 5/4/95 - * $FreeBSD: releng/12.0/bin/sh/var.h 326025 2017-11-20 19:49:47Z pfg $ - */ - -/* - * Shell variables. - */ - -/* flags */ -#define VEXPORT 0x01 /* variable is exported */ -#define VREADONLY 0x02 /* variable cannot be modified */ -#define VSTRFIXED 0x04 /* variable struct is statically allocated */ -#define VTEXTFIXED 0x08 /* text is statically allocated */ -#define VSTACK 0x10 /* text is allocated on the stack */ -#define VUNSET 0x20 /* the variable is not set */ -#define VNOFUNC 0x40 /* don't call the callback function */ -#define VNOSET 0x80 /* do not set variable - just readonly test */ -#define VNOLOCAL 0x100 /* ignore forcelocal */ - - -struct var { - struct var *next; /* next entry in hash list */ - int flags; /* flags are defined above */ - int name_len; /* length of name */ - char *text; /* name=value */ - void (*func)(const char *); - /* function to be called when */ - /* the variable gets set/unset */ -}; - - -struct localvar { - struct localvar *next; /* next local variable in list */ - struct var *vp; /* the variable that was made local */ - int flags; /* saved flags */ - char *text; /* saved text */ -}; - - -extern struct localvar *localvars; -extern int forcelocal; - -extern struct var vifs; -extern struct var vmail; -extern struct var vmpath; -extern struct var vpath; -extern struct var vps0; -extern struct var vps1; -extern struct var vps2; -extern struct var vps4; -extern struct var vrps1; -extern struct var vrps2; -extern struct var vdisvfork; -#ifndef NO_HISTORY -extern struct var vhistfile; -extern struct var vhistsize; -extern struct var vterm; -#endif - -extern int localeisutf8; -/* The parser uses the locale that was in effect at startup. */ -extern int initial_localeisutf8; - -/* - * The following macros access the values of the above variables. - * They have to skip over the name. They return the null string - * for unset variables. - */ - -#define ifsval() (vifs.text + 4) -#define ifsset() ((vifs.flags & VUNSET) == 0) -#define mailval() (vmail.text + 5) -#define mpathval() (vmpath.text + 9) -#define pathval() (vpath.text + 5) -#define ps0val() (vps0.text + 4) -#define ps1val() (vps1.text + 4) -#define ps2val() (vps2.text + 4) -#define ps4val() (vps4.text + 4) -#define rps1val() (vrps1.text + 5) -#define rps2val() (vrps2.text + 5) -#define optindval() (voptind.text + 7) -#ifndef NO_HISTORY -#define histfileval() (vhistfile.text + 9) -#define histsizeval() (vhistsize.text + 9) -#define termval() (vterm.text + 5) -#endif - -#define mpathset() ((vmpath.flags & VUNSET) == 0) -#define disvforkset() ((vdisvfork.flags & VUNSET) == 0) - -void initvar(void); -void setvar(const char *, const char *, int); -void setvareq(char *, int); -struct arglist; -void listsetvar(struct arglist *, int); -char *lookupvar(const char *); -char *bltinlookup(const char *, int); -void bltinsetlocale(void); -void bltinunsetlocale(void); -void updatecharset(void); -void initcharset(void); -char **environment(void); -int showvarscmd(int, char **); -void mklocal(char *); -void poplocalvars(void); -int unsetvar(const char *); -int setvarsafe(const char *, const char *, int); |