diff options
| -rw-r--r-- | etc/conf.d/cpupower | 28 | ||||
| -rw-r--r-- | etc/pacman.conf | 17 | ||||
| -rw-r--r-- | etc/pulse/default.pa | 167 |
3 files changed, 172 insertions, 40 deletions
diff --git a/etc/conf.d/cpupower b/etc/conf.d/cpupower deleted file mode 100644 index cbcf46e1..00000000 --- a/etc/conf.d/cpupower +++ /dev/null @@ -1,28 +0,0 @@ -# Define CPUs governor -# valid governors: ondemand, performance, powersave, conservative, userspace. -governor='performance' - -# Limit frequency range -# Valid suffixes: Hz, kHz (default), MHz, GHz, THz -#min_freq="2.25GHz" -#max_freq="3GHz" - -# Specific frequency to be set. -# Requires userspace governor to be available and loaded. -#freq= - -# Utilizes cores in one processor package/socket first before processes are -# scheduled to other processor packages/sockets. -# See man (1) CPUPOWER-SET for additional details. -#mc_scheduler= - -# Utilizes thread siblings of one processor core first before processes are -# scheduled to other cores. See man (1) CPUPOWER-SET for additional details. -#smp_scheduler= - -# Sets a register on supported Intel processore which allows software to convey -# its policy for the relative importance of performance versus energy savings to -# the processor. See man (1) CPUPOWER-SET for additional details. -#perf_bias= - -# vim:set ts=2 sw=2 ft=sh et: diff --git a/etc/pacman.conf b/etc/pacman.conf index 7837cfec..284f839e 100644 --- a/etc/pacman.conf +++ b/etc/pacman.conf @@ -15,11 +15,10 @@ #LogFile = /var/log/pacman.log #GPGDir = /etc/pacman.d/gnupg/ HoldPkg = pacman glibc -# If upgrades are available for these packages they will be asked for first -SyncFirst = pacman #XferCommand = /usr/bin/curl -C - -f %u > %o #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u #CleanMethod = KeepInstalled +#UseDelta = 0.7 Architecture = auto # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup @@ -31,7 +30,7 @@ Architecture = auto # Misc options #UseSyslog -#UseDelta +Color TotalDownload CheckSpace VerbosePkgLists @@ -39,7 +38,9 @@ ILoveCandy # By default, pacman accepts packages signed by keys that its local keyring # trusts (see pacman-key and its man page), as well as unsigned packages. -#SigLevel = Optional TrustedOnly +SigLevel = Required DatabaseOptional +LocalFileSigLevel = Optional +#RemoteFileSigLevel = Required # NOTE: You must run `pacman-key --init` before first using pacman; the local # keyring can then be populated with the keys of all official Arch Linux @@ -69,34 +70,27 @@ ILoveCandy # after the header, and they will be used before the default mirrors. #[testing] -#SigLevel = PackageRequired #Include = /etc/pacman.d/mirrorlist [core] -SigLevel = PackageRequired Include = /etc/pacman.d/mirrorlist [extra] -SigLevel = PackageRequired Include = /etc/pacman.d/mirrorlist #[community-testing] -#SigLevel = PackageRequired #Include = /etc/pacman.d/mirrorlist [community] -SigLevel = PackageRequired Include = /etc/pacman.d/mirrorlist # If you want to run 32 bit applications on your x86_64 system, # enable the multilib repositories as required here. #[multilib-testing] -#SigLevel = PackageRequired #Include = /etc/pacman.d/mirrorlist [multilib] -SigLevel = PackageRequired Include = /etc/pacman.d/mirrorlist # An example of a custom package repository. See the pacman manpage for @@ -104,4 +98,3 @@ Include = /etc/pacman.d/mirrorlist #[custom] #SigLevel = Optional TrustAll #Server = file:///home/custompkgs - diff --git a/etc/pulse/default.pa b/etc/pulse/default.pa new file mode 100644 index 00000000..686dcab7 --- /dev/null +++ b/etc/pulse/default.pa @@ -0,0 +1,167 @@ +#!/usr/bin/pulseaudio -nF +# +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started per-user +# (i.e. not in system mode) + +.nofail + +### Load something into the sample cache +#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav + +.fail + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore +load-module module-card-restore + +### Automatically augment property information from .desktop files +### stored in /usr/share/application +load-module module-augment-properties + +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) +#load-module module-alsa-sink +#load-module module-alsa-source device=hw:1,0 +#load-module module-oss device="/dev/dsp" sink_name=output source_name=input +#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input +#load-module module-null-sink +#load-module module-pipe-sink + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect tsched=1 +.else +### Use the static hardware detection module (for systems that lack udev/hal support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect +.fail +.endif + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Network access (may be configured with paprefs, so leave this commented +### here if you plan to use paprefs) +#load-module module-esound-protocol-tcp +#load-module module-native-protocol-tcp +#load-module module-zeroconf-publish + +### Load the RTP receiver module (also configured via paprefs, see above) +#load-module module-rtp-recv + +### Load the RTP sender module (also configured via paprefs, see above) +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-rtp-send source=rtp.monitor + +### Load additional modules from GConf settings. This can be configured with the paprefs tool. +### Please keep in mind that the modules configured by paprefs might conflict with manually +### loaded modules. +.ifexists module-gconf.so +.nofail +load-module module-gconf +.fail +.endif + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Honour intended role device property +load-module module-intended-roles + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### If autoexit on idle is enabled we want to make sure we only quit +### when no local session needs us anymore. +.ifexists module-console-kit.so +.nofail +load-module module-console-kit +.fail +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif + +### Enable positioned event sounds +load-module module-position-event-sounds + +### Cork music/video streams when a phone stream is active +load-module module-role-cork + +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif + +# X11 modules should not be started from default.pa so that one daemon +# can be shared by multiple sessions. + +### Load X11 bell module +#load-module module-x11-bell sample=bell-windowing-system + +### Register ourselves in the X11 session manager +#load-module module-x11-xsmp + +### Publish connection data in the X11 root window +#.ifexists module-x11-publish.so +#.nofail +#load-module module-x11-publish +#.fail +#.endif + +load-module module-switch-on-port-available + +### Make some devices default +#set-default-sink output +#set-default-source input |