diff options
Diffstat (limited to 'bin/1sh/1sh.1')
| -rw-r--r-- | bin/1sh/1sh.1 | 2917 |
1 files changed, 2917 insertions, 0 deletions
diff --git a/bin/1sh/1sh.1 b/bin/1sh/1sh.1 new file mode 100644 index 00000000..aa906bca --- /dev/null +++ b/bin/1sh/1sh.1 @@ -0,0 +1,2917 @@ +.\"- +.\" Copyright (c) 1991, 1993 +.\" The Regents of the University of California. All rights reserved. +.\" +.\" This code is derived from software contributed to Berkeley by +.\" Kenneth Almquist. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. Neither the name of the University nor the names of its contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" from: @(#)sh.1 8.6 (Berkeley) 5/4/95 +.\" $FreeBSD: releng/12.1/bin/sh/sh.1 345487 2019-03-24 22:10:26Z jilles $ +.\" +.Dd March 9, 2020 +.Dt 1SH 1 +.Os +.Sh NAME +.Nm 1sh +.Nd command interpreter (shell) +.Sh SYNOPSIS +.Nm +.Op Fl /+abCEefhIimnPpTuVvx +.Op Fl /+o Ar longname +.Oo +.Ar script +.Op Ar arg ... +.Oc +.Nm +.Op Fl /+abCEefhIimnPpTuVvx +.Op Fl /+o Ar longname +.Fl c Ar string +.Oo +.Ar name +.Op Ar arg ... +.Oc +.Nm +.Op Fl /+abCEefhIimnPpTuVvx +.Op Fl /+o Ar longname +.Fl s +.Op Ar arg ... +.Sh DESCRIPTION +The +.Nm +utility is a command interpreter. +The current version of +.Nm +is close to the +.St -p1003.1 +specification for the shell. +It only supports features +designated by POSIX, +plus a few Berkeley extensions. +This man page is not intended to be a tutorial nor a complete +specification of the shell. +.Ss Overview +The shell is a command that reads lines from +either a file or the terminal, interprets them, and +generally executes other commands. +It is the program that is started when a user logs into the system, +although a user can select a different shell with the +.Xr chsh 1 +command. +The shell +implements a language that has flow control constructs, +a macro facility that provides a variety of features in +addition to data storage, along with built-in history and line +editing capabilities. +It incorporates many features to +aid interactive use and has the advantage that the interpretative +language is common to both interactive and non-interactive +use (shell scripts). +That is, commands can be typed directly +to the running shell or can be put into a file, +which can be executed directly by the shell. +.Ss Invocation +.\" +.\" XXX This next sentence is incredibly confusing. +.\" +If no arguments are present and if the standard input of the shell +is connected to a terminal +(or if the +.Fl i +option is set), +the shell is considered an interactive shell. +An interactive shell +generally prompts before each command and handles programming +and command errors differently (as described below). +When first starting, the shell inspects argument 0, and +if it begins with a dash +.Pq Ql - , +the shell is also considered a login shell. +This is normally done automatically by the system +when the user first logs in. +A login shell first reads commands +from the files +.Pa /etc/profile +and then +.Pa .profile +in a user's home directory, +if they exist. +If the environment variable +.Ev ENV +is set on entry to a shell, or is set in the +.Pa .profile +of a login shell, the shell then subjects its value to parameter expansion +and arithmetic expansion and reads commands from the named file. +Therefore, a user should place commands that are to be executed only +at login time in the +.Pa .profile +file, and commands that are executed for every shell inside the +.Ev ENV +file. +The user can set the +.Ev ENV +variable to some file by placing the following line in the file +.Pa .profile +in the home directory, +substituting for +.Pa .shrc +the filename desired: +.Pp +.Dl "ENV=$HOME/.shrc; export ENV" +.Pp +The first non-option argument specified on the command line +will be treated as the +name of a file from which to read commands (a shell script), and +the remaining arguments are set as the positional parameters +of the shell +.Li ( $1 , $2 , +etc.). +Otherwise, the shell reads commands +from its standard input. +.Pp +Unlike older versions of +.Nm +the +.Ev ENV +script is only sourced on invocation of interactive shells. +This +closes a well-known, and sometimes easily exploitable security +hole related to poorly thought out +.Ev ENV +scripts. +.Ss Argument List Processing +All of the single letter options to +.Nm +have a corresponding long name, +with the exception of +.Fl c +and +.Fl /+o . +These long names are provided next to the single letter options +in the descriptions below. +The long name for an option may be specified as an argument to the +.Fl /+o +option of +.Nm . +Once the shell is running, +the long name for an option may be specified as an argument to the +.Fl /+o +option of the +.Ic set +built-in command +(described later in the section called +.Sx Built-in Commands ) . +Introducing an option with a dash +.Pq Ql - +enables the option, +while using a plus +.Pq Ql + +disables the option. +A +.Dq Li -- +or plain +.Ql - +will stop option processing and will force the remaining +words on the command line to be treated as arguments. +The +.Fl /+o +and +.Fl c +options do not have long names. +They take arguments and are described after the single letter options. +.Bl -tag -width indent +.It Fl a Li allexport +Flag variables for export when assignments are made to them. +.It Fl b Li notify +Enable asynchronous notification of background job +completion. +(UNIMPLEMENTED) +.It Fl C Li noclobber +Do not overwrite existing files with +.Ql > . +.It Fl E Li emacs +Enable the built-in +.Xr emacs 1 +command line editor (disables the +.Fl V +option if it has been set; +set automatically when interactive on terminals). +.It Fl e Li errexit +Exit immediately if any untested command fails in non-interactive mode. +The exit status of a command is considered to be +explicitly tested if the command is part of the list used to control +an +.Ic if , elif , while , +or +.Ic until ; +if the command is the left +hand operand of an +.Dq Li && +or +.Dq Li || +operator; or if the command is a pipeline preceded by the +.Ic !\& +keyword. +If a shell function is executed and its exit status is explicitly +tested, all commands of the function are considered to be tested as +well. +.Pp +It is recommended to check for failures explicitly +instead of relying on +.Fl e +because it tends to behave in unexpected ways, +particularly in larger scripts. +.It Fl f Li noglob +Disable pathname expansion. +.It Fl h Li trackall +A do-nothing option for POSIX compliance. +.It Fl I Li ignoreeof +Ignore +.Dv EOF Ap s +from input when in interactive mode. +.It Fl i Li interactive +Force the shell to behave interactively. +.It Fl m Li monitor +Turn on job control (set automatically when interactive). +A new process group is created for each pipeline (called a job). +It is possible to suspend jobs or to have them run in the foreground or +in the background. +In a non-interactive shell, +this option can be set even if no terminal is available +and is useful to place processes in separate process groups. +.It Fl n Li noexec +If not interactive, read commands but do not +execute them. +This is useful for checking the +syntax of shell scripts. +.It Fl P Li physical +Change the default for the +.Ic cd +and +.Ic pwd +commands from +.Fl L +(logical directory layout) +to +.Fl P +(physical directory layout). +.It Fl p Li privileged +Turn on privileged mode. +This mode is enabled on startup +if either the effective user or group ID is not equal to the +real user or group ID. +Turning this mode off sets the +effective user and group IDs to the real user and group IDs. +When this mode is enabled for interactive shells, the file +.Pa /etc/suid_profile +is sourced instead of +.Pa ~/.profile +after +.Pa /etc/profile +is sourced, and the contents of the +.Ev ENV +variable are ignored. +.It Fl s Li stdin +Read commands from standard input (set automatically +if no file arguments are present). +This option has +no effect when set after the shell has already started +running (i.e., when set with the +.Ic set +command). +.It Fl T Li trapsasync +When waiting for a child, execute traps immediately. +If this option is not set, +traps are executed after the child exits, +as specified in +.St -p1003.2 . +This nonstandard option is useful for putting guarding shells around +children that block signals. +The surrounding shell may kill the child +or it may just return control to the tty and leave the child alone, +like this: +.Bd -literal -offset indent +1sh -T -c "trap 'exit 1' 2 ; some-blocking-program" +.Ed +.It Fl u Li nounset +Write a message to standard error when attempting +to expand a variable, a positional parameter or +the special parameter +.Va \&! +that is not set, and if the +shell is not interactive, exit immediately. +.It Fl V Li vi +Enable the built-in +.Xr vi 1 +command line editor (disables +.Fl E +if it has been set). +.It Fl v Li verbose +The shell writes its input to standard error +as it is read. +Useful for debugging. +.It Fl x Li xtrace +Write each command +(preceded by the value of the +.Va PS4 +variable subjected to parameter expansion and arithmetic expansion) +to standard error before it is executed. +Useful for debugging. +.It Li nolog +Another do-nothing option for POSIX compliance. +It only has a long name. +.It Li pipefail +Change the exit status of a pipeline to the last non-zero exit status of +any command in the pipeline, if any. +Since an exit due to +.Dv SIGPIPE +counts as a non-zero exit status, +this option may cause non-zero exit status for successful pipelines +if a command such as +.Xr head 1 +in the pipeline terminates with status 0 without reading its +input completely. +This option only has a long name. +.El +.Pp +The +.Fl c +option causes the commands to be read from the +.Ar string +operand instead of from the standard input. +Keep in mind that this option only accepts a single string as its +argument, hence multi-word strings must be quoted. +.Pp +The +.Fl /+o +option takes as its only argument the long name of an option +to be enabled or disabled. +For example, the following two invocations of +.Nm +both enable the built-in +.Xr emacs 1 +command line editor: +.Bd -literal -offset indent +set -E +set -o emacs +.Ed +.Pp +If used without an argument, the +.Fl o +option displays the current option settings in a human-readable format. +If +.Cm +o +is used without an argument, the current option settings are output +in a format suitable for re-input into the shell. +.Ss Lexical Structure +The shell reads input in terms of lines from a file and breaks +it up into words at whitespace (blanks and tabs), and at +certain sequences of +characters called +.Dq operators , +which are special to the shell. +There are two types of operators: control operators and +redirection operators (their meaning is discussed later). +The following is a list of valid operators: +.Bl -tag -width indent +.It Control operators: +.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact +.It Li & Ta Li && Ta Li \&( Ta Li \&) Ta Li \en +.It Li ;; Ta Li ;& Ta Li \&; Ta Li \&| Ta Li || +.El +.It Redirection operators: +.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact +.It Li < Ta Li > Ta Li << Ta Li >> Ta Li <> +.It Li <& Ta Li >& Ta Li <<- Ta Li >| Ta \& +.El +.El +.Pp +The character +.Ql # +introduces a comment if used at the beginning of a word. +The word starting with +.Ql # +and the rest of the line are ignored. +.Pp +ASCII +.Dv NUL +characters (character code 0) are not allowed in shell input. +.Ss Quoting +Quoting is used to remove the special meaning of certain characters +or words to the shell, such as operators, whitespace, keywords, +or alias names. +.Pp +There are four types of quoting: matched single quotes, +dollar-single quotes, +matched double quotes, and backslash. +.Bl -tag -width indent +.It Single Quotes +Enclosing characters in single quotes preserves the literal +meaning of all the characters (except single quotes, making +it impossible to put single-quotes in a single-quoted string). +.It Dollar-Single Quotes +Enclosing characters between +.Li $' +and +.Li ' +preserves the literal meaning of all characters +except backslashes and single quotes. +A backslash introduces a C-style escape sequence: +.Bl -tag -width xUnnnnnnnn +.It \ea +Alert (ring the terminal bell) +.It \eb +Backspace +.It \ec Ns Ar c +The control character denoted by +.Li ^ Ns Ar c +in +.Xr stty 1 . +If +.Ar c +is a backslash, it must be doubled. +.It \ee +The ESC character (ASCII 0x1b) +.It \ef +Formfeed +.It \en +Newline +.It \er +Carriage return +.It \et +Horizontal tab +.It \ev +Vertical tab +.It \e\e +Literal backslash +.It \e\&' +Literal single-quote +.It \e\&" +Literal double-quote +.It \e Ns Ar nnn +The byte whose octal value is +.Ar nnn +(one to three digits) +.It \ex Ns Ar nn +The byte whose hexadecimal value is +.Ar nn +(one or more digits only the last two of which are used) +.It \eu Ns Ar nnnn +The Unicode code point +.Ar nnnn +(four hexadecimal digits) +.It \eU Ns Ar nnnnnnnn +The Unicode code point +.Ar nnnnnnnn +(eight hexadecimal digits) +.El +.Pp +The sequences for Unicode code points are currently only useful with +UTF-8 locales. +They reject code point 0 and UTF-16 surrogates. +.Pp +If an escape sequence would produce a byte with value 0, +that byte and the rest of the string until the matching single-quote +are ignored. +.Pp +Any other string starting with a backslash is an error. +.It Double Quotes +Enclosing characters within double quotes preserves the literal +meaning of all characters except dollar sign +.Pq Ql $ , +backquote +.Pq Ql ` , +and backslash +.Pq Ql \e . +The backslash inside double quotes is historically weird. +It remains literal unless it precedes the following characters, +which it serves to quote: +.Pp +.Bl -column "XXX" "XXX" "XXX" "XXX" "XXX" -offset center -compact +.It Li $ Ta Li ` Ta Li \&" Ta Li \e Ta Li \en +.El +.It Backslash +A backslash preserves the literal meaning of the following +character, with the exception of the newline character +.Pq Ql \en . +A backslash preceding a newline is treated as a line continuation. +.El +.Ss Keywords +Keywords or reserved words are words that have special meaning to the +shell and are recognized at the beginning of a line and +after a control operator. +The following are keywords: +.Bl -column "doneXX" "elifXX" "elseXX" "untilXX" "whileX" -offset center +.It Li \&! Ta { Ta } Ta Ic case Ta Ic do +.It Ic done Ta Ic elif Ta Ic else Ta Ic esac Ta Ic fi +.It Ic for Ta Ic if Ta Ic then Ta Ic until Ta Ic while +.El +.Ss Aliases +An alias is a name and corresponding value set using the +.Ic alias +built-in command. +Wherever the command word of a simple command may occur, +and after checking for keywords if a keyword may occur, the shell +checks the word to see if it matches an alias. +If it does, it replaces it in the input stream with its value. +For example, if there is an alias called +.Dq Li lf +with the value +.Dq Li "ls -F" , +then the input +.Pp +.Dl "lf foobar" +.Pp +would become +.Pp +.Dl "ls -F foobar" +.Pp +Aliases are also recognized after an alias +whose value ends with a space or tab. +For example, if there is also an alias called +.Dq Li nohup +with the value +.Dq Li "nohup " , +then the input +.Pp +.Dl "nohup lf foobar" +.Pp +would become +.Pp +.Dl "nohup ls -F foobar" +.Pp +Aliases provide a convenient way for naive users to +create shorthands for commands without having to learn how +to create functions with arguments. +Using aliases in scripts is discouraged +because the command that defines them must be executed +before the code that uses them is parsed. +This is fragile and not portable. +.Pp +An alias name may be escaped in a command line, so that it is not +replaced by its alias value, by using quoting characters within or +adjacent to the alias name. +This is most often done by prefixing +an alias name with a backslash to execute a function, built-in, or +normal program with the same name. +See the +.Sx Quoting +subsection. +.Ss Commands +The shell interprets the words it reads according to a +language, the specification of which is outside the scope +of this man page (refer to the BNF in the +.St -p1003.2 +document). +Essentially though, a line is read and if +the first word of the line (or after a control operator) +is not a keyword, then the shell has recognized a +simple command. +Otherwise, a complex command or some +other special construct may have been recognized. +.Ss Simple Commands +If a simple command has been recognized, the shell performs +the following actions: +.Bl -enum +.It +Leading words of the form +.Dq Li name=value +are stripped off and assigned to the environment of +the simple command +(they do not affect expansions). +Redirection operators and +their arguments (as described below) are stripped +off and saved for processing. +.It +The remaining words are expanded as described in +the section called +.Sx Word Expansions , +and the first remaining word is considered the command +name and the command is located. +The remaining +words are considered the arguments of the command. +If no command name resulted, then the +.Dq Li name=value +variable assignments recognized in 1) affect the +current shell. +.It +Redirections are performed as described in +the next section. +.El +.Ss Redirections +Redirections are used to change where a command reads its input +or sends its output. +In general, redirections open, close, or +duplicate an existing reference to a file. +The overall format +used for redirection is: +.Pp +.D1 Oo Ar n Oc Ar redir-op file +.Pp +The +.Ar redir-op +is one of the redirection operators mentioned +previously. +The following gives some examples of how these +operators can be used. +Note that stdin and stdout are commonly used abbreviations +for standard input and standard output respectively. +.Bl -tag -width "1234567890XX" -offset indent +.It Oo Ar n Oc Ns Li > Ar file +redirect stdout (or file descriptor +.Ar n ) +to +.Ar file +.It Oo Ar n Oc Ns Li >| Ar file +same as above, but override the +.Fl C +option +.It Oo Ar n Oc Ns Li >> Ar file +append stdout (or file descriptor +.Ar n ) +to +.Ar file +.It Oo Ar n Oc Ns Li < Ar file +redirect stdin (or file descriptor +.Ar n ) +from +.Ar file +.It Oo Ar n Oc Ns Li <> Ar file +redirect stdin (or file descriptor +.Ar n ) +to and from +.Ar file +.It Oo Ar n1 Oc Ns Li <& Ns Ar n2 +duplicate stdin (or file descriptor +.Ar n1 ) +from file descriptor +.Ar n2 +.It Oo Ar n Oc Ns Li <&- +close stdin (or file descriptor +.Ar n ) +.It Oo Ar n1 Oc Ns Li >& Ns Ar n2 +duplicate stdout (or file descriptor +.Ar n1 ) +to file descriptor +.Ar n2 +.It Oo Ar n Oc Ns Li >&- +close stdout (or file descriptor +.Ar n ) +.El +.Pp +The following redirection is often called a +.Dq here-document . +.Bd -unfilled -offset indent +.Oo Ar n Oc Ns Li << Ar delimiter +.Ar here-doc-text +.Ar ... +.Ar delimiter +.Ed +.Pp +All the text on successive lines up to the delimiter is +saved away and made available to the command on standard +input, or file descriptor +.Ar n +if it is specified. +If the +.Ar delimiter +as specified on the initial line is quoted, then the +.Ar here-doc-text +is treated literally, otherwise the text is subjected to +parameter expansion, command substitution, and arithmetic +expansion (as described in the section on +.Sx Word Expansions ) . +If the operator is +.Dq Li <<- +instead of +.Dq Li << , +then leading tabs +in the +.Ar here-doc-text +are stripped. +.Ss Search and Execution +There are three types of commands: shell functions, +built-in commands, and normal programs. +The command is searched for (by name) in that order. +The three types of commands are all executed in a different way. +.Pp +When a shell function is executed, all of the shell positional +parameters (except +.Li $0 , +which remains unchanged) are +set to the arguments of the shell function. +The variables which are explicitly placed in the environment of +the command (by placing assignments to them before the +function name) are made local to the function and are set +to the values given. +Then the command given in the function definition is executed. +The positional parameters are restored to their original values +when the command completes. +This all occurs within the current shell. +.Pp +Shell built-in commands are executed internally to the shell, without +spawning a new process. +There are two kinds of built-in commands: regular and special. +Assignments before special builtins persist after they finish +executing and assignment errors, redirection errors and certain +operand errors cause a script to be aborted. +Special builtins cannot be overridden with a function. +Both regular and special builtins can affect the shell in ways +normal programs cannot. +.Pp +Otherwise, if the command name does not match a function +or built-in command, the command is searched for as a normal +program in the file system (as described in the next section). +When a normal program is executed, the shell runs the program, +passing the arguments and the environment to the program. +If the program is not a normal executable file +(i.e., if it does not begin with the +.Dq "magic number" +whose ASCII representation is +.Dq Li #! , +resulting in an +.Er ENOEXEC +return value from +.Xr execve 2 ) +but appears to be a text file, +the shell will run a new instance of +.Nm +to interpret it. +.Pp +Note that previous versions of this document +and the source code itself misleadingly and sporadically +refer to a shell script without a magic number +as a +.Dq "shell procedure" . +.Ss Path Search +When locating a command, the shell first looks to see if +it has a shell function by that name. +Then it looks for a +built-in command by that name. +If a built-in command is not found, +one of two things happen: +.Bl -enum +.It +Command names containing a slash are simply executed without +performing any searches. +.It +The shell searches each entry in the +.Va PATH +variable +in turn for the command. +The value of the +.Va PATH +variable should be a series of +entries separated by colons. +Each entry consists of a +directory name. +The current directory +may be indicated implicitly by an empty directory name, +or explicitly by a single period. +.El +.Ss Command Exit Status +Each command has an exit status that can influence the behavior +of other shell commands. +The paradigm is that a command exits +with zero for normal or success, and non-zero for failure, +error, or a false indication. +The man page for each command +should indicate the various exit codes and what they mean. +Additionally, the built-in commands return exit codes, as does +an executed shell function. +.Pp +If a command is terminated by a signal, its exit status is greater than 128. +The signal name can be found by passing the exit status to +.Li kill -l . +.Pp +If there is no command word, +the exit status is the exit status of the last command substitution executed, +or zero if the command does not contain any command substitutions. +.Ss Complex Commands +Complex commands are combinations of simple commands +with control operators or keywords, together creating a larger complex +command. +More generally, a command is one of the following: +.Bl -item -offset indent +.It +simple command +.It +pipeline +.It +list or compound-list +.It +compound command +.It +function definition +.El +.Pp +Unless otherwise stated, the exit status of a command is +that of the last simple command executed by the command, +or zero if no simple command was executed. +.Ss Pipelines +A pipeline is a sequence of one or more commands separated +by the control operator +.Ql \&| . +The standard output of all but +the last command is connected to the standard input +of the next command. +The standard output of the last +command is inherited from the shell, as usual. +.Pp +The format for a pipeline is: +.Pp +.D1 Oo Li \&! Oc Ar command1 Op Li \&| Ar command2 ... +.Pp +The standard output of +.Ar command1 +is connected to the standard input of +.Ar command2 . +The standard input, standard output, or +both of a command is considered to be assigned by the +pipeline before any redirection specified by redirection +operators that are part of the command. +.Pp +Note that unlike some other shells, +.Nm +executes each process in a pipeline with more than one command +in a subshell environment and as a child of the +.Nm +process. +.Pp +If the pipeline is not in the background (discussed later), +the shell waits for all commands to complete. +.Pp +If the keyword +.Ic !\& +does not precede the pipeline, the +exit status is the exit status of the last command specified +in the pipeline if the +.Cm pipefail +option is not set or all commands returned zero, +or the last non-zero exit status of any command in the pipeline otherwise. +Otherwise, the exit status is the logical +NOT of that exit status. +That is, if +that status is zero, the exit status is 1; if +that status is greater than zero, the exit status +is zero. +.Pp +Because pipeline assignment of standard input or standard +output or both takes place before redirection, it can be +modified by redirection. +For example: +.Pp +.Dl "command1 2>&1 | command2" +.Pp +sends both the standard output and standard error of +.Ar command1 +to the standard input of +.Ar command2 . +.Pp +A +.Ql \&; +or newline terminator causes the preceding +AND-OR-list +(described below in the section called +.Sx Short-Circuit List Operators ) +to be executed sequentially; +an +.Ql & +causes asynchronous execution of the preceding AND-OR-list. +.Ss Background Commands (&) +If a command is terminated by the control operator ampersand +.Pq Ql & , +the shell executes the command in a subshell environment (see +.Sx Grouping Commands Together +below) and asynchronously; +the shell does not wait for the command to finish +before executing the next command. +.Pp +The format for running a command in background is: +.Pp +.D1 Ar command1 Li & Op Ar command2 Li & Ar ... +.Pp +If the shell is not interactive, the standard input of an +asynchronous command is set to +.Pa /dev/null . +.Pp +The exit status is zero. +.Ss Lists (Generally Speaking) +A list is a sequence of zero or more commands separated by +newlines, semicolons, or ampersands, +and optionally terminated by one of these three characters. +The commands in a +list are executed in the order they are written. +If command is followed by an ampersand, the shell starts the +command and immediately proceeds onto the next command; +otherwise it waits for the command to terminate before +proceeding to the next one. +.Ss Short-Circuit List Operators +.Dq Li && +and +.Dq Li || +are AND-OR list operators. +.Dq Li && +executes the first command, and then executes the second command +if the exit status of the first command is zero. +.Dq Li || +is similar, but executes the second command if the exit +status of the first command is nonzero. +.Dq Li && +and +.Dq Li || +both have the same priority. +.Ss Flow-Control Constructs (if, while, for, case) +The syntax of the +.Ic if +command is: +.Bd -unfilled -offset indent -compact +.Ic if Ar list +.Ic then Ar list +.Oo Ic elif Ar list +.Ic then Ar list Oc Ar ... +.Op Ic else Ar list +.Ic fi +.Ed +.Pp +The exit status is that of selected +.Ic then +or +.Ic else +list, +or zero if no list was selected. +.Pp +The syntax of the +.Ic while +command is: +.Bd -unfilled -offset indent -compact +.Ic while Ar list +.Ic do Ar list +.Ic done +.Ed +.Pp +The two lists are executed repeatedly while the exit status of the +first list is zero. +The +.Ic until +command is similar, but has the word +.Ic until +in place of +.Ic while , +which causes it to +repeat until the exit status of the first list is zero. +.Pp +The exit status is that of the last execution of the second list, +or zero if it was never executed. +.Pp +The syntax of the +.Ic for +command is: +.Bd -unfilled -offset indent -compact +.Ic for Ar variable Op Ic in Ar word ... +.Ic do Ar list +.Ic done +.Ed +.Pp +If +.Ic in +and the following words are omitted, +.Ic in Li \&"$@\&" +is used instead. +The words are expanded, and then the list is executed +repeatedly with the variable set to each word in turn. +The +.Ic do +and +.Ic done +commands may be replaced with +.Ql { +and +.Ql } . +.Pp +The syntax of the +.Ic break +and +.Ic continue +commands is: +.D1 Ic break Op Ar num +.D1 Ic continue Op Ar num +.Pp +The +.Ic break +command terminates the +.Ar num +innermost +.Ic for +or +.Ic while +loops. +The +.Ic continue +command continues with the next iteration of the innermost loop. +These are implemented as special built-in commands. +.Pp +The syntax of the +.Ic case +command is: +.Bd -unfilled -offset indent -compact +.Ic case Ar word Ic in +.Ar pattern ) Ar list Li ;; +.Ar ... +.Ic esac +.Ed +.Pp +The pattern can actually be one or more patterns +(see +.Sx Shell Patterns +described later), +separated by +.Ql \&| +characters. +Tilde expansion, parameter expansion, command substitution, +arithmetic expansion and quote removal are applied to the word. +Then, each pattern is expanded in turn using tilde expansion, +parameter expansion, command substitution and arithmetic expansion and +the expanded form of the word is checked against it. +If a match is found, the corresponding list is executed. +If the selected list is terminated by the control operator +.Ql ;& +instead of +.Ql ;; , +execution continues with the next list, +continuing until a list terminated with +.Ql ;; +or the end of the +.Ic case +command. +.Ss Grouping Commands Together +Commands may be grouped by writing either +.Pp +.Sm off +.Bd -literal -offset -ident +.Po Ar list Pc +.Ed +.Sm on +.Pp +or +.Bd -literal -offset -ident +.No { Ar list ; } +.Ed +.Pp +The first form executes the commands in a subshell environment. +A subshell environment has its own copy of: +.Bl -enum +.It +The current working directory as set by +.Ic cd . +.It +The file creation mask as set by +.Ic umask . +.It +Resource limits as set by +.Ic ulimit . +.It +References to open files. +.It +Traps as set by +.Ic trap . +.It +Known jobs. +.It +Positional parameters and variables. +.It +Shell options. +.It +Shell functions. +.It +Shell aliases. +.El +.Pp +These are copied from the parent shell environment, +except that trapped (but not ignored) signals are reset to the default action +and known jobs are cleared. +Any changes do not affect the parent shell environment. +.Pp +A subshell environment may be implemented as a child process or differently. +If job control is enabled in an interactive shell, +commands grouped in parentheses can be suspended and continued as a unit. +.Pp +For compatibility with other shells, +two open parentheses in sequence should be separated by whitespace. +.Pp +The second form never forks another shell, +so it is slightly more efficient. +Grouping commands together this way allows the user to +redirect their output as though they were one program: +.Bd -literal -offset indent +{ echo -n "hello"; echo " world"; } > greeting +.Ed +.Ss Functions +The syntax of a function definition is +.Pp +.D1 Ar name Li \&( \&) Ar command +.Pp +A function definition is an executable statement; when +executed it installs a function named +.Ar name +and returns an +exit status of zero. +The +.Ar command +is normally a list +enclosed between +.Ql { +and +.Ql } . +.Pp +Variables may be declared to be local to a function by +using the +.Ic local +command. +This should appear as the first statement of a function, +and the syntax is: +.Pp +.D1 Ic local Oo Ar variable ... Oc Op Fl +.Pp +The +.Ic local +command is implemented as a built-in command. +The exit status is zero +unless the command is not in a function or a variable name is invalid. +.Pp +When a variable is made local, it inherits the initial +value and exported and readonly flags from the variable +with the same name in the surrounding scope, if there is +one. +Otherwise, the variable is initially unset. +The shell +uses dynamic scoping, so that if the variable +.Va x +is made local to function +.Em f , +which then calls function +.Em g , +references to the variable +.Va x +made inside +.Em g +will refer to the variable +.Va x +declared inside +.Em f , +not to the global variable named +.Va x . +.Pp +The only special parameter that can be made local is +.Ql - . +Making +.Ql - +local causes any shell options +(including those that only have long names) +that are +changed via the +.Ic set +command inside the function to be +restored to their original values when the function +returns. +.Pp +The syntax of the +.Ic return +command is +.Pp +.D1 Ic return Op Ar exitstatus +.Pp +It terminates the current executional scope, returning from the closest +nested function or sourced script; +if no function or sourced script is being executed, +it exits the shell instance. +The +.Ic return +command is implemented as a special built-in command. +.Ss Variables and Parameters +The shell maintains a set of parameters. +A parameter +denoted by a name +(consisting solely +of alphabetics, numerics, and underscores, +and starting with an alphabetic or an underscore) +is called a variable. +When starting up, +the shell turns all environment variables with valid names into shell +variables. +New variables can be set using the form +.Pp +.D1 Ar name Ns = Ns Ar value +.Pp +A parameter can also be denoted by a number +or a special character as explained below. +.Pp +Assignments are expanded differently from other words: +tilde expansion is also performed after the equals sign and after any colon +and usernames are also terminated by colons, +and field splitting and pathname expansion are not performed. +.Pp +This special expansion applies not only to assignments that form a simple +command by themselves or precede a command word, +but also to words passed to the +.Ic export , +.Ic local +or +.Ic readonly +built-in commands that have this form. +For this, the builtin's name must be literal +(not the result of an expansion) +and may optionally be preceded by one or more literal instances of +.Ic command +without options. +.Ss Positional Parameters +A positional parameter is a parameter denoted by a number greater than zero. +The shell sets these initially to the values of its command line +arguments that follow the name of the shell script. +The +.Ic set +built-in command can also be used to set or reset them. +.Ss Special Parameters +Special parameters are parameters denoted by a single special character +or the digit zero. +They are shown in the following list, exactly as they would appear in input +typed by the user or in the source of a shell script. +.Bl -hang +.It Li $* +Expands to the positional parameters, starting from one. +When +the expansion occurs within a double-quoted string +it expands to a single field with the value of each parameter +separated by the first character of the +.Va IFS +variable, +or by a space if +.Va IFS +is unset. +.It Li $@ +Expands to the positional parameters, starting from one. +When +the expansion occurs within double-quotes, each positional +parameter expands as a separate argument. +If there are no positional parameters, the +expansion of +.Li @ +generates zero arguments, even when +.Li @ +is double-quoted. +What this basically means, for example, is +if +.Li $1 +is +.Dq Li abc +and +.Li $2 +is +.Dq Li "def ghi" , +then +.Li \&"$@\&" +expands to +the two arguments: +.Bd -literal -offset indent +"abc" "def ghi" +.Ed +.It Li $# +Expands to the number of positional parameters. +.It Li $? +Expands to the exit status of the most recent pipeline. +.It Li $- +(hyphen) Expands to the current option flags (the single-letter +option names concatenated into a string) as specified on +invocation, by the +.Ic set +built-in command, or implicitly +by the shell. +.It Li $$ +Expands to the process ID of the invoked shell. +A subshell +retains the same value of +.Va $ +as its parent. +.It Li $! +Expands to the process ID of the most recent background +command executed from the current shell. +For a +pipeline, the process ID is that of the last command in the +pipeline. +If this parameter is referenced, the shell will remember +the process ID and its exit status until the +.Ic wait +built-in command reports completion of the process. +.It Li $0 +(zero) Expands to the name of the shell script if passed on the command line, +the +.Ar name +operand if given (with +.Fl c ) +or otherwise argument 0 passed to the shell. +.El +.Ss Special Variables +The following variables are set by the shell or +have special meaning to it: +.Bl -tag -width ".Va HISTSIZE" +.It Va CDPATH +The search path used with the +.Ic cd +built-in. +.It Va EDITOR +The fallback editor used with the +.Ic fc +built-in. +If not set, the default editor is +.Xr ed 1 . +.It Va FCEDIT +The default editor used with the +.Ic fc +built-in. +.It Va HISTFILE +The path to the file in which command history is saved. +History is loaded when +.Va HISTFILE +is set and saved on exit. +.It Va HISTSIZE +The number of previous commands that are accessible. +.It Va HOME +The user's home directory, +used in tilde expansion and as a default directory for the +.Ic cd +built-in. +.It Va IFS +Input Field Separators. +This is initialized at startup to +.Aq space , +.Aq tab , +and +.Aq newline +in that order. +This value also applies if +.Va IFS +is unset, but not if it is set to the empty string. +See the +.Sx White Space Splitting +section for more details. +.It Va LINENO +The current line number in the script or function. +.It Va MAIL +The name of a mail file, that will be checked for the arrival of new +mail. +Overridden by +.Va MAILPATH . +.It Va MAILPATH +A colon +.Pq Ql \&: +separated list of file names, for the shell to check for incoming +mail. +This variable overrides the +.Va MAIL +setting. +There is a maximum of 10 mailboxes that can be monitored at once. +.It Va OPTIND +The index of the next argument to be processed by +.Ic getopts . +This is initialized to 1 at startup. +.It Va PATH +The default search path for executables. +See the +.Sx Path Search +section for details. +.It Va PPID +The parent process ID of the invoked shell. +This is set at startup +unless this variable is in the environment. +A later change of parent process ID is not reflected. +A subshell retains the same value of +.Va PPID . +.It Va PS0 +The pre-prompt string, +which is printed before each new prompt. +.Va PS0 +may include any of the formatting sequences from +.Va PS1 . +.It Va PS1 +The primary prompt string, which defaults to +.Dq Li "$ " , +unless you are the superuser, in which case it defaults to +.Dq Li "# " . +.Va PS1 +may include any of the following formatting sequences, +which are replaced by the given information: +.Bl -tag -width indent +.It Li \eH +This system's fully-qualified hostname (FQDN). +.It Li \eh +This system's hostname. +.It Li \eW +The final component of the current working directory. +.It Li \ew +The entire path of the current working directory. +.It Li \e? +Exit status if it is non-zero, empty string otherwise. +.It Li \e$ +Superuser status. +.Dq Li "$ " +for normal users and +.Dq Li "# " +for superusers. +.It Li \e\e +A literal backslash. +.El +.It Va PS2 +The secondary prompt string, which defaults to +.Dq Li "> " . +.Va PS2 +may include any of the formatting sequences from +.Va PS1 . +.It Va PS4 +The prefix for the trace output (if +.Fl x +is active). +The default is +.Dq Li "+ " . +.It Va RPS1 +The primary right prompt string. +.Va RPS1 +may include any of the formatting sequences from +.Va PS1 . +.It Va RPS2 +The secondary right prompt string. +.Va RPS2 +may include any of the formatting sequences from +.Va PS1 . +.El +.Ss Word Expansions +This clause describes the various expansions that are +performed on words. +Not all expansions are performed on +every word, as explained later. +.Pp +Tilde expansions, parameter expansions, command substitutions, +arithmetic expansions, and quote removals that occur within +a single word expand to a single field. +It is only field +splitting or pathname expansion that can create multiple +fields from a single word. +The single exception to this rule is +the expansion of the special parameter +.Va @ +within double-quotes, +as was described above. +.Pp +The order of word expansion is: +.Bl -enum +.It +Tilde Expansion, Parameter Expansion, Command Substitution, +Arithmetic Expansion (these all occur at the same time). +.It +Field Splitting is performed on fields generated by step (1) +unless the +.Va IFS +variable is null. +.It +Pathname Expansion (unless the +.Fl f +option is in effect). +.It +Quote Removal. +.El +.Pp +The +.Ql $ +character is used to introduce parameter expansion, command +substitution, or arithmetic expansion. +.Ss Tilde Expansion (substituting a user's home directory) +A word beginning with an unquoted tilde character +.Pq Ql ~ +is +subjected to tilde expansion. +All the characters up to a slash +.Pq Ql / +or the end of the word are treated as a username +and are replaced with the user's home directory. +If the +username is missing (as in +.Pa ~/foobar ) , +the tilde is replaced with the value of the +.Va HOME +variable (the current user's home directory). +.Ss Parameter Expansion +The format for parameter expansion is as follows: +.Pp +.D1 Li ${ Ns Ar expression Ns Li } +.Pp +where +.Ar expression +consists of all characters until the matching +.Ql } . +Any +.Ql } +escaped by a backslash or within a single-quoted or double-quoted +string, and characters in +embedded arithmetic expansions, command substitutions, and variable +expansions, are not examined in determining the matching +.Ql } . +If the variants with +.Ql + , +.Ql - , +.Ql = +or +.Ql ?\& +occur within a double-quoted string, +as an extension there may be unquoted parts +(via double-quotes inside the expansion); +.Ql } +within such parts are also not examined in determining the matching +.Ql } . +.Pp +The simplest form for parameter expansion is: +.Pp +.D1 Li ${ Ns Ar parameter Ns Li } +.Pp +The value, if any, of +.Ar parameter +is substituted. +.Pp +The parameter name or symbol can be enclosed in braces, which are +optional except for positional parameters with more than one digit or +when parameter is followed by a character that could be interpreted as +part of the name. +If a parameter expansion occurs inside double-quotes: +.Bl -enum +.It +Field splitting is not performed on the results of the +expansion, with the exception of the special parameter +.Va @ . +.It +Pathname expansion is not performed on the results of the +expansion. +.El +.Pp +In addition, a parameter expansion can be modified by using one of the +following formats. +.Bl -tag -width indent +.It Li ${ Ns Ar parameter Ns Li :- Ns Ar word Ns Li } +Use Default Values. +If +.Ar parameter +is unset or null, the expansion of +.Ar word +is substituted; otherwise, the value of +.Ar parameter +is substituted. +.It Li ${ Ns Ar parameter Ns Li := Ns Ar word Ns Li } +Assign Default Values. +If +.Ar parameter +is unset or null, the expansion of +.Ar word +is assigned to +.Ar parameter . +In all cases, the +final value of +.Ar parameter +is substituted. +Quoting inside +.Ar word +does not prevent field splitting or pathname expansion. +Only variables, not positional +parameters or special parameters, can be +assigned in this way. +.It Li ${ Ns Ar parameter Ns Li :? Ns Oo Ar word Oc Ns Li } +Indicate Error if Null or Unset. +If +.Ar parameter +is unset or null, the expansion of +.Ar word +(or a message indicating it is unset if +.Ar word +is omitted) is written to standard +error and the shell exits with a nonzero +exit status. +Otherwise, the value of +.Ar parameter +is substituted. +An +interactive shell need not exit. +.It Li ${ Ns Ar parameter Ns Li :+ Ns Ar word Ns Li } +Use Alternate Value. +If +.Ar parameter +is unset or null, null is substituted; +otherwise, the expansion of +.Ar word +is substituted. +.El +.Pp +In the parameter expansions shown previously, use of the colon in the +format results in a test for a parameter that is unset or null; omission +of the colon results in a test for a parameter that is only unset. +.Pp +The +.Ar word +inherits the type of quoting +(unquoted, double-quoted or here-document) +from the surroundings, +with the exception that a backslash that quotes a closing brace is removed +during quote removal. +.Bl -tag -width indent +.It Li ${# Ns Ar parameter Ns Li } +String Length. +The length in characters of +the value of +.Ar parameter . +.El +.Pp +The following four varieties of parameter expansion provide for substring +processing. +In each case, pattern matching notation +(see +.Sx Shell Patterns ) , +rather than regular expression notation, +is used to evaluate the patterns. +If parameter is one of the special parameters +.Va * +or +.Va @ , +the result of the expansion is unspecified. +Enclosing the full parameter expansion string in double-quotes does not +cause the following four varieties of pattern characters to be quoted, +whereas quoting characters within the braces has this effect. +.Bl -tag -width indent +.It Li ${ Ns Ar parameter Ns Li % Ns Ar word Ns Li } +Remove Smallest Suffix Pattern. +The +.Ar word +is expanded to produce a pattern. +The +parameter expansion then results in +.Ar parameter , +with the smallest portion of the +suffix matched by the pattern deleted. +.It Li ${ Ns Ar parameter Ns Li %% Ns Ar word Ns Li } +Remove Largest Suffix Pattern. +The +.Ar word +is expanded to produce a pattern. +The +parameter expansion then results in +.Ar parameter , +with the largest portion of the +suffix matched by the pattern deleted. +.It Li ${ Ns Ar parameter Ns Li # Ns Ar word Ns Li } +Remove Smallest Prefix Pattern. +The +.Ar word +is expanded to produce a pattern. +The +parameter expansion then results in +.Ar parameter , +with the smallest portion of the +prefix matched by the pattern deleted. +.It Li ${ Ns Ar parameter Ns Li ## Ns Ar word Ns Li } +Remove Largest Prefix Pattern. +The +.Ar word +is expanded to produce a pattern. +The +parameter expansion then results in +.Ar parameter , +with the largest portion of the +prefix matched by the pattern deleted. +.El +.Ss Command Substitution +Command substitution allows the output of a command to be substituted in +place of the command name itself. +Command substitution occurs when +the command is enclosed as follows: +.Pp +.D1 Li $( Ns Ar command Ns Li )\& +.Pp +or the backquoted version: +.Pp +.D1 Li ` Ns Ar command Ns Li ` +.Pp +The shell expands the command substitution by executing command +and replacing the command substitution +with the standard output of the command, +removing sequences of one or more newlines at the end of the substitution. +Embedded newlines before the end of the output are not removed; +however, during field splitting, they may be translated into spaces +depending on the value of +.Va IFS +and the quoting that is in effect. +The command is executed in a subshell environment, +except that the built-in commands +.Ic jobid , +.Ic jobs , +and +.Ic trap +return information about the parent shell environment +and +.Ic times +returns information about the same process +if they are the only command in a command substitution. +.Pp +If a command substitution of the +.Li $( +form begins with a subshell, +the +.Li $( +and +.Li (\& +must be separated by whitespace +to avoid ambiguity with arithmetic expansion. +.Ss Arithmetic Expansion +Arithmetic expansion provides a mechanism for evaluating an arithmetic +expression and substituting its value. +The format for arithmetic expansion is as follows: +.Pp +.D1 Li $(( Ns Ar expression Ns Li )) +.Pp +The +.Ar expression +is treated as if it were in double-quotes, except +that a double-quote inside the expression is not treated specially. +The +shell expands all tokens in the +.Ar expression +for parameter expansion, +command substitution, +arithmetic expansion +and quote removal. +.Pp +The allowed expressions are a subset of C expressions, +summarized below. +.Bl -tag -width "Variables" -offset indent +.It Values +All values are of type +.Ft intmax_t . +.It Constants +Decimal, octal (starting with +.Li 0 ) +and hexadecimal (starting with +.Li 0x ) +integer constants. +.It Variables +Shell variables can be read and written +and contain integer constants. +.It Unary operators +.Li "! ~ + -" +.It Binary operators +.Li "* / % + - << >> < <= > >= == != & ^ | && ||"\& +.It Assignment operators +.Li "= += -= *= /= %= <<= >>= &= ^= |=" +.It Conditional operator +.Li "? :"\& +.El +.Pp +The result of the expression is substituted in decimal. +.Ss White Space Splitting (Field Splitting) +In certain contexts, +after parameter expansion, command substitution, and +arithmetic expansion the shell scans the results of +expansions and substitutions that did not occur in double-quotes for +field splitting and multiple fields can result. +.Pp +Characters in +.Va IFS +that are whitespace +.Po +.Aq space , +.Aq tab , +and +.Aq newline +.Pc +are treated differently from other characters in +.Va IFS . +.Pp +Whitespace in +.Va IFS +at the beginning or end of a word is discarded. +.Pp +Subsequently, a field is delimited by either +.Bl -enum +.It +a non-whitespace character in +.Va IFS +with any whitespace in +.Va IFS +surrounding it, or +.It +one or more whitespace characters in +.Va IFS . +.El +.Pp +If a word ends with a non-whitespace character in +.Va IFS , +there is no empty field after this character. +.Pp +If no field is delimited, the word is discarded. +In particular, if a word consists solely of an unquoted substitution +and the result of the substitution is null, +it is removed by field splitting even if +.Va IFS +is null. +.Ss Pathname Expansion (File Name Generation) +Unless the +.Fl f +option is set, +file name generation is performed +after word splitting is complete. +Each word is +viewed as a series of patterns, separated by slashes. +The +process of expansion replaces the word with the names of +all existing files whose names can be formed by replacing +each pattern with a string that matches the specified pattern. +There are two restrictions on this: first, a pattern cannot match +a string containing a slash, and second, +a pattern cannot match a string starting with a period +unless the first character of the pattern is a period. +The next section describes the patterns used for +Pathname Expansion, +the four varieties of parameter expansion for substring processing and the +.Ic case +command. +.Ss Shell Patterns +A pattern consists of normal characters, which match themselves, +and meta-characters. +The meta-characters are +.Ql * , +.Ql \&? , +and +.Ql \&[ . +These characters lose their special meanings if they are quoted. +When command or variable substitution is performed and the dollar sign +or back quotes are not double-quoted, the value of the +variable or the output of the command is scanned for these +characters and they are turned into meta-characters. +.Pp +An asterisk +.Pq Ql * +matches any string of characters. +A question mark +.Pq Ql \&? +matches any single character. +A left bracket +.Pq Ql \&[ +introduces a character class. +The end of the character class is indicated by a +.Ql \&] ; +if the +.Ql \&] +is missing then the +.Ql \&[ +matches a +.Ql \&[ +rather than introducing a character class. +A character class matches any of the characters between the square brackets. +A locale-dependent range of characters may be specified using a minus sign. +A named class of characters (see +.Xr wctype 3 ) +may be specified by surrounding the name with +.Ql \&[:\& +and +.Ql :\&] . +For example, +.Ql \&[\&[:alpha:\&]\&] +is a shell pattern that matches a single letter. +The character class may be complemented by making an exclamation point +.Pq Ql !\& +the first character of the character class. +A caret +.Pq Ql ^ +has the same effect but is non-standard. +.Pp +To include a +.Ql \&] +in a character class, make it the first character listed +(after the +.Ql \&! +or +.Ql ^ , +if any). +To include a +.Ql - , +make it the first or last character listed. +.Ss Built-in Commands +This section lists the built-in commands. +.Bl -tag -width indent +.It Ic \&: +A null command that returns a 0 (true) exit value. +.It Ic \&. Ar file +The commands in the specified file are read and executed by the shell. +The +.Ic return +command may be used to return to the +.Ic \&. +command's caller. +If +.Ar file +contains any +.Ql / +characters, it is used as is. +Otherwise, the shell searches the +.Va PATH +for the file. +If it is not found in the +.Va PATH , +it is sought in the current working directory. +.It Ic \&[ +A built-in equivalent of +.Xr test 1 . +.It Ic alias Oo Ar name Ns Oo = Ns Ar string Oc ... Oc +If +.Ar name Ns = Ns Ar string +is specified, the shell defines the alias +.Ar name +with value +.Ar string . +If just +.Ar name +is specified, the value of the alias +.Ar name +is printed. +With no arguments, the +.Ic alias +built-in command prints the names and values of all defined aliases +(see +.Ic unalias ) . +Alias values are written with appropriate quoting so that they are +suitable for re-input to the shell. +Also see the +.Sx Aliases +subsection. +.It Ic bg Op Ar job ... +Continue the specified jobs +(or the current job if no jobs are given) +in the background. +.It Ic bind Oo Fl aeklrsv Oc Oo Ar key Oo Ar command Oc Oc +List or alter key bindings for the line editor. +This command is documented in +.Xr editrc 5 . +.It Ic break Op Ar num +See the +.Sx Flow-Control Constructs +subsection. +.It Ic builtin Ar cmd Op Ar arg ... +Execute the specified built-in command, +.Ar cmd . +This is useful when the user wishes to override a shell function +with the same name as a built-in command. +.It Ic cd Oo Fl L | P Oc Oo Fl e Oc Op Ar directory +.It Ic cd Fl +Switch to the specified +.Ar directory , +to the directory specified in the +.Va HOME +environment variable if no +.Ar directory +is specified or +to the directory specified in the +.Va OLDPWD +environment variable if +.Ar directory +is +.Fl . +If +.Ar directory +does not begin with +.Pa / , \&. , +or +.Pa .. , +then the directories listed in the +.Va CDPATH +variable will be +searched for the specified +.Ar directory . +If +.Va CDPATH +is unset, the current directory is searched. +The format of +.Va CDPATH +is the same as that of +.Va PATH . +In an interactive shell, +the +.Ic cd +command will print out the name of the directory +that it actually switched to +if the +.Va CDPATH +mechanism was used or if +.Ar directory +was +.Fl . +.Pp +If the +.Fl P +option is specified, +.Pa .. +is handled physically and symbolic links are resolved before +.Pa .. +components are processed. +If the +.Fl L +option is specified, +.Pa .. +is handled logically. +This is the default. +.Pp +The +.Fl e +option causes +.Ic cd +to return exit status 1 if the full pathname of the new directory +cannot be determined reliably or at all. +Normally this is not considered an error, +although a warning is printed. +.Pp +If changing the directory fails, the exit status is greater than 1. +If the directory is changed, the exit status is 0, or also 1 if +.Fl e +was given. +.It Ic chdir +A synonym for the +.Ic cd +built-in command. +.It Ic command Oo Fl p Oc Op Ar utility Op Ar argument ... +.It Ic command Oo Fl p Oc Fl v Ar utility +.It Ic command Oo Fl p Oc Fl V Ar utility +The first form of invocation executes the specified +.Ar utility , +ignoring shell functions in the search. +If +.Ar utility +is a special builtin, +it is executed as if it were a regular builtin. +.Pp +If the +.Fl p +option is specified, the command search is performed using a +default value of +.Va PATH +that is guaranteed to find all of the standard utilities. +.Pp +If the +.Fl v +option is specified, +.Ar utility +is not executed but a description of its interpretation by the shell is +printed. +For ordinary commands the output is the path name; for shell built-in +commands, shell functions and keywords only the name is written. +Aliases are printed as +.Dq Ic alias Ar name Ns = Ns Ar value . +.Pp +The +.Fl V +option is identical to +.Fl v +except for the output. +It prints +.Dq Ar utility Ic is Ar description +where +.Ar description +is either +the path name to +.Ar utility , +a special shell builtin, +a shell builtin, +a shell function, +a shell keyword +or +an alias for +.Ar value . +.It Ic continue Op Ar num +See the +.Sx Flow-Control Constructs +subsection. +.It Ic echo Oo Fl e | n Oc Op Ar string ... +Print a space-separated list of the arguments to the standard output +and append a newline character. +.Bl -tag -width indent +.It Fl n +Suppress the output of the trailing newline. +.It Fl e +Process C-style backslash escape sequences. +The +.Ic echo +command understands the following character escapes: +.Bl -tag -width indent +.It \ea +Alert (ring the terminal bell) +.It \eb +Backspace +.It \ec +Suppress the trailing newline (this has the side-effect of truncating the +line if it is not the last character) +.It \ee +The ESC character (ASCII 0x1b) +.It \ef +Formfeed +.It \en +Newline +.It \er +Carriage return +.It \et +Horizontal tab +.It \ev +Vertical tab +.It \e\e +Literal backslash +.It \e0nnn +(Zero) The character whose octal value is +.Ar nnn +.El +.Pp +If +.Ar string +is not enclosed in quotes then the backslash itself must be escaped +with a backslash to protect it from the shell. +For example +.Bd -literal -offset indent +$ echo -e "a\evb" +a + b +$ echo -e a\e\evb +a + b +$ echo -e "a\e\eb" +a\eb +$ echo -e a\e\e\e\eb +a\eb +.Ed +.El +.Pp +Only one of the +.Fl e +and +.Fl n +options may be specified. +.It Ic eval Ar string ... +Concatenate all the arguments with spaces. +Then re-parse and execute the command. +.It Ic exec Op Ar command Op arg ... +Unless +.Ar command +is omitted, +the shell process is replaced with the specified program +(which must be a real program, not a shell built-in command or function). +Any redirections on the +.Ic exec +command are marked as permanent, +so that they are not undone when the +.Ic exec +command finishes. +.It Ic exit Op Ar exitstatus +Terminate the shell process. +If +.Ar exitstatus +is given +it is used as the exit status of the shell. +Otherwise, if the shell is executing an +.Cm EXIT +trap, the exit status of the last command before the trap is used; +if the shell is executing a trap for a signal, +the shell exits by resending the signal to itself. +Otherwise, the exit status of the preceding command is used. +The exit status should be an integer between 0 and 255. +.It Ic export Ar name ... +.It Ic export Op Fl p +The specified names are exported so that they will +appear in the environment of subsequent commands. +The only way to un-export a variable is to +.Ic unset +it. +The shell allows the value of a variable to be set +at the same time as it is exported by writing +.Pp +.D1 Ic export Ar name Ns = Ns Ar value +.Pp +With no arguments the +.Ic export +command lists the names +of all exported variables. +If the +.Fl p +option is specified, the exported variables are printed as +.Dq Ic export Ar name Ns = Ns Ar value +lines, suitable for re-input to the shell. +.It Ic false +A null command that returns a non-zero (false) exit value. +.It Ic fc Oo Fl e Ar editor Oc Op Ar first Op Ar last +.It Ic fc Fl l Oo Fl nr Oc Op Ar first Op Ar last +.It Ic fc Fl s Oo Ar old Ns = Ns Ar new Oc Op Ar first +The +.Ic fc +built-in command lists, or edits and re-executes, +commands previously entered to an interactive shell. +.Bl -tag -width indent +.It Fl e Ar editor +Use the editor named by +.Ar editor +to edit the commands. +The +.Ar editor +string is a command name, +subject to search via the +.Va PATH +variable. +The value in the +.Va FCEDIT +variable is used as a default when +.Fl e +is not specified. +If +.Va FCEDIT +is null or unset, the value of the +.Va EDITOR +variable is used. +If +.Va EDITOR +is null or unset, +.Xr ed 1 +is used as the editor. +.It Fl l No (ell) +List the commands rather than invoking +an editor on them. +The commands are written in the +sequence indicated by the +.Ar first +and +.Ar last +operands, as affected by +.Fl r , +with each command preceded by the command number. +.It Fl n +Suppress command numbers when listing with +.Fl l . +.It Fl r +Reverse the order of the commands listed +(with +.Fl l ) +or edited +(with neither +.Fl l +nor +.Fl s ) . +.It Fl s +Re-execute the command without invoking an editor. +.It Ar first +.It Ar last +Select the commands to list or edit. +The number of previous commands that can be accessed +are determined by the value of the +.Va HISTSIZE +variable. +The value of +.Ar first +or +.Ar last +or both are one of the following: +.Bl -tag -width indent +.It Oo Cm + Oc Ns Ar num +A positive number representing a command number; +command numbers can be displayed with the +.Fl l +option. +.It Fl Ar num +A negative decimal number representing the +command that was executed +.Ar num +of +commands previously. +For example, \-1 is the immediately previous command. +.It Ar string +A string indicating the most recently entered command +that begins with that string. +If the +.Ar old Ns = Ns Ar new +operand is not also specified with +.Fl s , +the string form of the first operand cannot contain an embedded equal sign. +.El +.El +.Pp +The following variables affect the execution of +.Ic fc : +.Bl -tag -width ".Va HISTSIZE" +.It Va FCEDIT +Name of the editor to use for history editing. +.It Va HISTSIZE +The number of previous commands that are accessible. +.El +.It Ic fg Op Ar job +Move the specified +.Ar job +or the current job to the foreground. +.It Ic getopts Ar optstring var +The POSIX +.Ic getopts +command. +The +.Ic getopts +command deprecates the older +.Xr getopt 1 +command. +The first argument should be a series of letters, each possibly +followed by a colon which indicates that the option takes an argument. +The specified variable is set to the parsed option. +The index of +the next argument is placed into the shell variable +.Va OPTIND . +If an option takes an argument, it is placed into the shell variable +.Va OPTARG . +If an invalid option is encountered, +.Ar var +is set to +.Ql \&? . +It returns a false value (1) when it encounters the end of the options. +A new set of arguments may be parsed by assigning +.Li OPTIND=1 . +.It Ic hash Oo Fl rv Oc Op Ar command ... +The shell maintains a hash table which remembers the locations of commands. +With no arguments whatsoever, the +.Ic hash +command prints out the contents of this table. +.Pp +With arguments, the +.Ic hash +command removes each specified +.Ar command +from the hash table (unless they are functions) and then locates it. +With the +.Fl v +option, +.Ic hash +prints the locations of the commands as it finds them. +The +.Fl r +option causes the +.Ic hash +command to delete all the entries in the hash table except for functions. +.It Ic jobid Op Ar job +Print the process IDs of the processes in the specified +.Ar job . +If the +.Ar job +argument is omitted, use the current job. +.It Ic jobs Oo Fl lps Oc Op Ar job ... +Print information about the specified jobs, or all jobs if no +.Ar job +argument is given. +The information printed includes job ID, status and command name. +.Pp +If the +.Fl l +option is specified, the PID of each job is also printed. +If the +.Fl p +option is specified, only the process IDs for the process group leaders +are printed, one per line. +If the +.Fl s +option is specified, only the PIDs of the job commands are printed, one per +line. +.It Ic kill +A built-in equivalent of +.Xr kill 1 +that additionally supports sending signals to jobs. +.It Ic local Oo Ar variable ... Oc Op Fl +See the +.Sx Functions +subsection. +.It Ic printf +A built-in equivalent of +.Xr printf 1 . +.It Ic pwd Op Fl L | P +Print the path of the current directory. +The built-in command may +differ from the program of the same name because the +built-in command remembers what the current directory +is rather than recomputing it each time. +This makes +it faster. +However, if the current directory is +renamed, +the built-in version of +.Xr pwd 1 +will continue to print the old name for the directory. +.Pp +If the +.Fl P +option is specified, symbolic links are resolved. +If the +.Fl L +option is specified, the shell's notion of the current directory +is printed (symbolic links are not resolved). +This is the default. +.It Ic read Oo Fl p Ar prompt Oc Oo +.Fl t Ar timeout Oc Oo Fl er Oc Ar variable ... +The +.Ar prompt +is printed if the +.Fl p +option is specified +and the standard input is a terminal. +Then a line is +read from the standard input. +The trailing newline +is deleted from the line and the line is split as +described in the section on +.Sx White Space Splitting (Field Splitting)\& +above, and +the pieces are assigned to the variables in order. +If there are more pieces than variables, the remaining +pieces (along with the characters in +.Va IFS +that separated them) +are assigned to the last variable. +If there are more variables than pieces, the remaining +variables are assigned the null string. +.Pp +Backslashes are treated specially, unless the +.Fl r +option is +specified. +If a backslash is followed by +a newline, the backslash and the newline will be +deleted. +If a backslash is followed by any other +character, the backslash will be deleted and the following +character will be treated as though it were not in +.Va IFS , +even if it is. +.Pp +If the +.Fl t +option is specified and the +.Ar timeout +elapses before a complete line of input is supplied, +the +.Ic read +command will return an exit status as if terminated by +.Dv SIGALRM +without assigning any values. +The +.Ar timeout +value may optionally be followed by one of +.Ql s , +.Ql m +or +.Ql h +to explicitly specify seconds, minutes or hours. +If none is supplied, +.Ql s +is assumed. +.Pp +The +.Fl e +option exists only for backward compatibility with older scripts. +.Pp +The exit status is 0 on success, 1 on end of file, +between 2 and 128 if an error occurs +and greater than 128 if a trapped signal interrupts +.Ic read . +.It Ic readonly Oo Fl p Oc Op Ar name ... +Each specified +.Ar name +is marked as read only, +so that it cannot be subsequently modified or unset. +The shell allows the value of a variable to be set +at the same time as it is marked read only +by using the following form: +.Pp +.D1 Ic readonly Ar name Ns = Ns Ar value +.Pp +With no arguments the +.Ic readonly +command lists the names of all read only variables. +If the +.Fl p +option is specified, the read-only variables are printed as +.Dq Ic readonly Ar name Ns = Ns Ar value +lines, suitable for re-input to the shell. +.It Ic return Op Ar exitstatus +See the +.Sx Functions +subsection. +.It Ic set Oo Fl /+abCEefIimnpTuVvx Oc Oo Fl /+o Ar longname Oc Oo +.Fl c Ar string Oc Op Fl - Ar arg ... +The +.Ic set +command performs three different functions: +.Bl -item +.It +With no arguments, it lists the values of all shell variables. +.It +If options are given, +either in short form or using the long +.Dq Fl /+o Ar longname +form, +it sets or clears the specified options as described in the section called +.Sx Argument List Processing . +.It +If the +.Dq Fl - +option is specified, +.Ic set +will replace the shell's positional parameters with the subsequent +arguments. +If no arguments follow the +.Dq Fl - +option, +all the positional parameters will be cleared, +which is equivalent to executing the command +.Dq Li "shift $#" . +The +.Dq Fl - +flag may be omitted when specifying arguments to be used +as positional replacement parameters. +This is not recommended, +because the first argument may begin with a dash +.Pq Ql - +or a plus +.Pq Ql + , +which the +.Ic set +command will interpret as a request to enable or disable options. +.El +.It Ic setvar Ar variable value +Assigns the specified +.Ar value +to the specified +.Ar variable . +The +.Ic setvar +command is intended to be used in functions that +assign values to variables whose names are passed as parameters. +In general it is better to write +.Dq Ar variable Ns = Ns Ar value +rather than using +.Ic setvar . +.It Ic shift Op Ar n +Shift the positional parameters +.Ar n +times, or once if +.Ar n +is not specified. +A shift sets the value of +.Li $1 +to the value of +.Li $2 , +the value of +.Li $2 +to the value of +.Li $3 , +and so on, +decreasing the value of +.Li $# +by one. +For portability, shifting if there are zero positional parameters +should be avoided, since the shell may abort. +.It Ic test +A built-in equivalent of +.Xr test 1 . +.It Ic times +Print the amount of time spent executing the shell process and its children. +The first output line shows the user and system times for the shell process +itself, the second one contains the user and system times for the +children. +.It Ic trap Oo Ar action Oc Ar signal ... +.It Ic trap Fl l +Cause the shell to parse and execute +.Ar action +when any specified +.Ar signal +is received. +The signals are specified by name or number. +In addition, the pseudo-signal +.Cm EXIT +may be used to specify an +.Ar action +that is performed when the shell terminates. +The +.Ar action +may be an empty string or a dash +.Pq Ql - ; +the former causes the specified signal to be ignored +and the latter causes the default action to be taken. +Omitting the +.Ar action +and using only signal numbers is another way to request the default action. +In a subshell or utility environment, +the shell resets trapped (but not ignored) signals to the default action. +The +.Ic trap +command has no effect on signals that were ignored on entry to the shell. +.Pp +Option +.Fl l +causes the +.Ic trap +command to display a list of valid signal names. +.It Ic true +A null command that returns a 0 (true) exit value. +.It Ic type Op Ar name ... +Interpret each +.Ar name +as a command and print the resolution of the command search. +Possible resolutions are: +shell keyword, alias, special shell builtin, shell builtin, command, +tracked alias +and not found. +For aliases the alias expansion is printed; +for commands and tracked aliases +the complete pathname of the command is printed. +.It Ic ulimit Oo Fl HSabcdfklmnopstuvw Oc Op Ar limit +Set or display resource limits (see +.Xr getrlimit 2 ) . +If +.Ar limit +is specified, the named resource will be set; +otherwise the current resource value will be displayed. +.Pp +If +.Fl H +is specified, the hard limits will be set or displayed. +While everybody is allowed to reduce a hard limit, +only the superuser can increase it. +The +.Fl S +option +specifies the soft limits instead. +When displaying limits, +only one of +.Fl S +or +.Fl H +can be given. +The default is to display the soft limits, +and to set both the hard and the soft limits. +.Pp +Option +.Fl a +causes the +.Ic ulimit +command to display all resources. +The parameter +.Ar limit +is not acceptable in this mode. +.Pp +The remaining options specify which resource value is to be +displayed or modified. +They are mutually exclusive. +.Bl -tag -width indent +.It Fl b Ar sbsize +The maximum size of socket buffer usage, in bytes. +.It Fl c Ar coredumpsize +The maximal size of core dump files, in 512-byte blocks. +Setting +.Ar coredumpsize +to 0 prevents core dump files from being created. +.It Fl d Ar datasize +The maximal size of the data segment of a process, in kilobytes. +.It Fl f Ar filesize +The maximal size of a file, in 512-byte blocks. +.It Fl k Ar kqueues +The maximal number of kqueues +(see +.Xr kqueue 2 ) +for this user ID. +.It Fl l Ar lockedmem +The maximal size of memory that can be locked by a process, in +kilobytes. +.It Fl m Ar memoryuse +The maximal resident set size of a process, in kilobytes. +.It Fl n Ar nofiles +The maximal number of descriptors that could be opened by a process. +.It Fl o Ar umtxp +The maximal number of process-shared locks +(see +.Xr pthread 3 ) +for this user ID. +.It Fl p Ar pseudoterminals +The maximal number of pseudo-terminals for this user ID. +.It Fl s Ar stacksize +The maximal size of the stack segment, in kilobytes. +.It Fl t Ar time +The maximal amount of CPU time to be used by each process, in seconds. +.It Fl u Ar userproc +The maximal number of simultaneous processes for this user ID. +.It Fl v Ar virtualmem +The maximal virtual size of a process, in kilobytes. +.It Fl w Ar swapuse +The maximum amount of swap space reserved or used for this user ID, +in kilobytes. +.El +.It Ic umask Oo Fl S Oc Op Ar mask +Set the file creation mask (see +.Xr umask 2 ) +to the octal or symbolic (see +.Xr chmod 1 ) +value specified by +.Ar mask . +If the argument is omitted, the current mask value is printed. +If the +.Fl S +option is specified, the output is symbolic, otherwise the output is octal. +.It Ic unalias Oo Fl a Oc Op Ar name ... +The specified alias names are removed. +If +.Fl a +is specified, all aliases are removed. +.It Ic unset Oo Fl fv Oc Ar name ... +The specified variables or functions are unset and unexported. +If the +.Fl v +option is specified or no options are given, the +.Ar name +arguments are treated as variable names. +If the +.Fl f +option is specified, the +.Ar name +arguments are treated as function names. +.It Ic wait Op Ar job ... +Wait for each specified +.Ar job +to complete and return the exit status of the last process in the +last specified +.Ar job . +If any +.Ar job +specified is unknown to the shell, it is treated as if it +were a known job that exited with exit status 127. +If no operands are given, wait for all jobs to complete +and return an exit status of zero. +.El +.Ss Command Line Editing +When +.Nm +is being used interactively from a terminal, the current command +and the command history +(see +.Ic fc +in +.Sx Built-in Commands ) +can be edited using +.Nm vi Ns -mode +command line editing. +This mode uses commands similar +to a subset of those described in the +.Xr vi 1 +man page. +The command +.Dq Li "set -o vi" +(or +.Dq Li "set -V" ) +enables +.Nm vi Ns -mode +editing and places +.Nm +into +.Nm vi +insert mode. +With +.Nm vi Ns -mode +enabled, +.Nm +can be switched between insert mode and command mode by typing +.Aq ESC . +Hitting +.Aq return +while in command mode will pass the line to the shell. +.Pp +Similarly, the +.Dq Li "set -o emacs" +(or +.Dq Li "set -E" ) +command can be used to enable a subset of +.Nm emacs Ns -style +command line editing features. +.Sh ENVIRONMENT +The following environment variables affect the execution of +.Nm : +.Bl -tag -width ".Ev LANGXXXXXX" +.It Ev ENV +Initialization file for interactive shells. +.It Ev LANG , Ev LC_* +Locale settings. +These are inherited by children of the shell, +and is used in a limited manner by the shell itself. +.It Ev OLDPWD +The previous current directory. +This is used and updated by +.Ic cd . +.It Ev PWD +An absolute pathname for the current directory, +possibly containing symbolic links. +This is used and updated by the shell. +.It Ev TERM +The default terminal setting for the shell. +This is inherited by children of the shell, and is used in the history +editing modes. +.El +.Pp +Additionally, environment variables are turned into shell variables +at startup, +which may affect the shell as described under +.Sx Special Variables . +.Sh FILES +.Bl -tag -width "/etc/suid_profileXX" -compact +.It Pa ~/.profile +User's login profile. +.It Pa /etc/profile +System login profile. +.It Pa /etc/shells +Shell database. +.It Pa /etc/suid_profile +Privileged shell profile. +.El +.Sh EXIT STATUS +Errors that are detected by the shell, such as a syntax error, will +cause the shell to exit with a non-zero exit status. +If the shell is not an interactive shell, the execution of the shell +file will be aborted. +Otherwise the shell will return the exit status of the last command +executed, or if the +.Ic exit +builtin is used with a numeric argument, it +will return the argument. +.Sh SEE ALSO +.Xr 1sh-kill 1 , +.Xr 1sh-printf 1 , +.Xr 1sh-test 1 , +.Xr builtin 1 , +.Xr chsh 1 , +.Xr echo 1 , +.Xr ed 1 , +.Xr emacs 1 , +.Xr pwd 1 , +.Xr vi 1 , +.Xr execve 2 , +.Xr getrlimit 2 , +.Xr umask 2 , +.Xr wctype 3 , +.Xr editrc 5 , +.Xr shells 5 +.Sh HISTORY +A +.Nm sh +command, the Thompson shell, appeared in +.At v1 . +It was superseded in +.At v7 +by the Bourne shell, which inherited the name +.Nm sh . +.Pp +This version of +.Nm sh +was rewritten in 1989 under the +.Bx +license after the Bourne shell from +.At V.4 . +The +.Nm +command is based on sources from +.Fx 12.1 . +.Sh AUTHORS +This version of +.Nm +was originally written by +.An Kenneth Almquist . +.Sh BUGS +The +.Nm +utility does not recognize multibyte characters other than UTF-8. +Splitting using +.Va IFS +does not recognize multibyte characters. |