summary refs log tree commit diff
path: root/handle.c (unfollow)
Commit message (Expand)Author
2020-03-23Bump edit buffer cap to 1024June McEnroe
2020-03-23Assume worst case for unknown user and host in splitMessageJune McEnroe
2020-03-22Implement message splittingJune McEnroe
2020-03-22Handle empty input directly in commandJune McEnroe
2020-03-22Track own host, handle CHGHOSTJune McEnroe
2020-03-22Add /sayJune McEnroe
2020-03-22Handle RPL_CHANNELMODEISJune McEnroe
2020-03-22Handle user mode changesJune McEnroe
2020-03-22Rewrite handleModeJune McEnroe
2020-03-18Handle RPL_UMODEISJune McEnroe
2020-03-17Send blank line after 10 minutes idleJune McEnroe
2020-03-09Ignore 422 ERR_NOMOTDJune McEnroe
2020-03-08Set self.pos before handling the messageJune McEnroe
2020-03-02Prevent entering commands in <debug> if restrictedJune McEnroe
2020-02-29Implement the causal.agency/consumer capabilityJune McEnroe
2020-02-25Add raw modes to mode messageJune McEnroe
2020-02-25Handle changing setParamModes, paramModes and other channel modesJune McEnroe
2020-02-25Fix handling EXCEPTS and INVEX without valuesJune McEnroe
2020-02-25Add /mode, /except, /invex and handle lists repliesJune McEnroe
2020-02-23Accumulate mode changes into a buffer for one messageJune McEnroe
2020-02-20Handle ERR_CHANOPRIVSNEEDEDJune McEnroe
2020-02-20Handle MODE changing channel list modesJune McEnroe
2020-02-20Handle MODE setting channel prefix modesJune McEnroe
2020-02-20Just use "b" to query ban listJune McEnroe
2020-02-20Change ban list formattingJune McEnroe
2020-02-20Rearrange some handlersJune McEnroe
2020-02-20Handle RPL_INVITING when no invite-notifyJune McEnroe
2020-02-20Handle ERR_BANLISTFULLJune McEnroe
2020-02-20Add handlers for user-in-channel errorsJune McEnroe
2020-02-20Add generic error reply handlerJune McEnroe
2020-02-19Add /ban, /unban and handle ban list repliesJune McEnroe
2020-02-19Format WHOIS signon date with %F %TJune McEnroe
2020-02-19Apply word wrapping to tabs before setting alignJune McEnroe
2020-02-19Remove bad continues in styleParse loopsJune McEnroe
2020-02-19Various small cleanup in ui.cJune McEnroe
2020-02-17Use the correct hostname in error messagemultiplexd
2020-02-17Increase buffer size to 1024June McEnroe
2020-02-17Accept Shift-M-0 through Shift-M-9 as wellJune McEnroe
2020-02-17Only scroll after reflow if necessaryJune McEnroe
2020-02-17Scroll the window only once during reflowJune McEnroe
2020-02-16Various small cleanupsJune McEnroe
2020-02-16Replace a lot of snprintf with a catf implementationJune McEnroe
2020-02-16Add 379 to WHOIS responsesJune McEnroe
2020-02-16Track EXCEPTS and INVEX modesJune McEnroe
2020-02-16Add RFC 1459 and modern.ircdocs.horse referencesJune McEnroe
2020-02-16Re-sort STANDARDS sectionJune McEnroe
2020-02-16Apply colorMentions to actionsJune McEnroe
2020-02-15Set defaults for various types of modesJune McEnroe
2020-02-15Replace small integers in size_t with uintJune McEnroe
2020-02-15Still add nick without prefixes to completeJune McEnroe
nd not by dash 0.5.4. Like I wrote, dash 0.5.5 had some bugs that were > > fixed in 0.5.6, which mostly restored the behaviour to match <0.5.5. > > Ah, sorry. dash 0.5.4 and earlier don't compile on my system, so they > are not included in my conveniently accessible arsenal of test shells. > > > As for my patches, that was by accident and doesn't work reliably. When > > the shell sees no metacharacters, pathname expansion is bypassed, and > > backslash isn't considered a metacharacter. Which got me to my original > > example of /de\v: there are no metacharacters in there, so the shell > > doesn't look to see if it matches anything. Which seems highly > > desirable: the shell shouldn't need to hit the file system for words not > > containing metacharacters. The only way then to get consistent behaviour > > is if the backslash is taken as quoted, so I'm not tempted to argue for > > the behaviour you're hoping for, sorry. :) Here is a better example: a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b dash currently prints /*/\nullx /*/\null bash prints /*/\nullx /dev/null You may argue the bash behaviour is inconsistent but it actually makes sense. What happens is that quote removal only applies to the original token as seen by the shell. It is never applied to the result of parameter expansion. Now you may ask why on earth does the second line say "/dev/null" instead of "/dev/\null". Well that's because it is not the quote removal step that removed the backslash, but the pathname expansion. The fact that the /de\v does not become /dev even though it exists is just the result of the optimisation to avoid unnecessarily calling stat(2). I have checked POSIX and I don't see anything that forbids this behaviour. So going back to dash yes I think we should adopt the bash behaviour for pathname expansion and keep the existing case semantics. This patch does exactly that. Note that this patch does not work unless you have already applied https://patchwork.kernel.org/patch/10306507/ because otherwise the optimisation mentioned above does not get detected correctly and we will end up doing quote removal twice. This patch also updates expmeta to handle naked backslashes at the end of the pattern which is now possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-19shell: Add subdir-objects to AM_INIT_AUTOMAKEJason Bowen I've attached a patch which adds the subdir-objects option to AM_INIT_AUTOMAKE. For a while now when I've compiled dash I received a warning from automake that there are source files in a subdirectory but that the subdir-objects automake option was not supplied. I've just been adding it myself, but I finally got around to submitting a patch. The code still compiles for now (i'm using automake 1.15.1), but warning text is rarely nice to see and, if the warning text is to be believed, then the warning will eventually become an error. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-19eval: Restore input files in evalcommandHerbert Xu When evalcommand invokes a command that modifies parsefile and then bails out without popping the file, we need to ensure the input file is restored so that the shell can continue to execute. Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-19eval: Reap zombies after built-in commands and functionsHerbert Xu Currently dash does not reap dead children after built-in commands or functions. This means that if you construct a loop consisting of solely built-in commands and functions, then zombies can hang around indefinitely. This patch fixes this by reaping when necessary after each built-in command and function. Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-19redir: Fix typo in noclobber codeHerbert Xu The noclobber code has a typo in it that causes it to fail. This patch fixes it. Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-19expand: Fix glibc glob(3) supportHerbert Xu It's been a while since we disabled glob(3) support by default. It appears to be working now, however, we have to change our code to detect the no-match case correctly. In particular, we need to test for GLOB_NOMAGIC | GLOB_NOCHECK instead of GLOB_MAGCHAR. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02expand: Fix buffer overflow in expandmetaHerbert Xu The native version of expandmeta allocates a buffer that may be overrun for two reasons. First of all the size is 1 byte too small but this is normally hidden because the minimum size is rounded up to 2048 bytes. Secondly, if the directory level is deep enough, any buffer can be overrun. This patch fixes both problems by calling realloc when necessary. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02builtin: Move echo space/nl handling into print_escape_strHerbert Xu Currently echocmd uses print_escape_str to do everything apart from printing the spaces/newlines separating its arguments. This patch moves the actual printing into print_escape_str as well using the format parameter. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02builtin: Fix echo performance regressionHerbert Xu The commit d6c0e1e2ffbf7913ab69d51cc794d48d41c8fcb1 ("[BUILTIN] Handle embedded NULs correctly in printf") caused a performance regression in the echo built-in because every echo call now goes through the printf %b slow path where the string is always printed twice to ensure the space padding is correct in the presence of NUL characters. In fact this regression applies to printf %b as well. This is easily fixed by making printf %b take the fast path when no precision/field width modifiers are present. This patch also changes the second strchurnul call to strspn which generates slightly better code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02expand: Fix ghost fields with unquoted $@/$*Herbert Xu Harald van Dijk <harald@gigawatt.nl> wrote: > On 22/03/2018 22:38, Martijn Dekker wrote: >> Op 22-03-18 om 20:28 schreef Harald van Dijk: >>> On 22/03/2018 03:40, Martijn Dekker wrote: >>>> This patch fixes the bug that, given no positional parameters, unquoted >>>> $@ and $* incorrectly generate one empty field (they should generate no >>>> fields). Apparently that was a side effect of the above. >>> >>> This seems weird though. If you want to remove the recording of empty >>> regions because they are pointless, then how does removing them fix a >>> bug? Doesn't this show that empty regions do have an effect? Perhaps >>> they're not supposed to have any effect, perhaps it's a specific >>> combination of empty regions and something else that triggers some bug, >>> and perhaps that combination can no longer occur with your patch. >> >> The latter is my guess, but I haven't had time to investigate it. > > Looking into it again: > > When IFS is set to an empty string, sepc is set to '\0' in varvalue(). > This then causes *quotedp to be set to true, meaning evalvar()'s quoted > variable is turned on. quoted is then passed to recordregion() as the > nulonly parameter. > > ifsp->nulonly has a bigger effect than merely selecting whether to use > $IFS or whether to only split on null bytes: in ifsbreakup(), nulonly > also causes string termination to be suppressed. That's correct: that > special treatment is required to preserve empty fields in "$@" > expansion. But it should *only* be used when $@ is quoted: ifsbreakup() > takes nulonly from the last IFS region, even if it's empty, so having an > additional zero-length region with nulonly enabled causes confusion. > > Passing quoted by value to varvalue() and not attempting to modify it > should therefore, and in my quick testing does, also work to fix the > original $@ bug. You're right. The proper fix to this is to ensure that nulonly is not set in varvalue for $*. It should only be set for $@ when it's inside double quotes. In fact there is another bug while we're playing with $@/$*. When IFS is set to a non-whitespace character such as :, $* outside quotes won't remove empty fields as it should. This patch fixes both problems. Reported-by: Martijn Dekker <martijn@inlv.org> Suggested-by: Harald van Dijk <harald@gigawatt.nl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02parser: Allow newlines within parameter substitutionHerbert Xu On Fri, Mar 16, 2018 at 11:27:22AM +0800, Herbert Xu wrote: > On Thu, Mar 15, 2018 at 10:49:15PM +0100, Harald van Dijk wrote: > > > > Okay, it can be trivially modified to something that does work in other > > shells (even if it were actually executed), but gets rejected at parse time > > by dash: > > > > if false; then > > : ${$+ > > } > > fi > > That's just a bug in dash's parser with ${} in general, because > it bombs out without the if clause too: > > : ${$+ > } This patch fixes the parsing of newlines with parameter substitution. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-04-02expand: Fix bugs with words connected to the right of $@Herbert Xu On Sun, Mar 04, 2018 at 12:44:59PM +0100, Harald van Dijk wrote: > > command: set -- a ""; space=" "; printf "<%s>" "$@"$space > bash: <a><> > dash 0.5.8: <a>< > > dash 0.5.9.1: <a>< > > dash patched: <a><> This is actually composed of two bugs. First of all our tracking of quotemark is wrong so anything after "$@" becomes quoted. Once we fix that then the problem is that the first space character after "$@" is not recognised as an IFS. This patch fixes both. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-03-25Revert "[BUILTIN] Remove unnecessary restoration of format string in printf"Herbert Xu This reverts commit 7bb413255368e94395237d789f522891093c5774. The commit breaks printf with more than argument. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 2018-03-22parser: Fix backquote support in here-document EOF markHerbert Xu