summary refs log tree commit diff
diff options
context:
space:
mode:
authorJune McEnroe <june@causal.agency>2014-11-29 22:04:50 -0500
committerJune McEnroe <june@causal.agency>2014-11-29 22:04:50 -0500
commit03e270a7536536833f286569067089787133c9d0 (patch)
treef60142b2d14a45d973815b650ff02234190dfded
parentAdd iTerm 2 configuration (diff)
downloadsrc-03e270a7536536833f286569067089787133c9d0.tar.gz
src-03e270a7536536833f286569067089787133c9d0.zip
Remove unused configs
-rw-r--r--.XCompose93
-rw-r--r--.gtkrc-2.04
-rw-r--r--.mpd/mpd.conf425
-rw-r--r--.ncmpcpp/bindings533
-rw-r--r--.ncmpcpp/config497
-rw-r--r--.riplrc1
-rwxr-xr-x.xprofile3
7 files changed, 0 insertions, 1556 deletions
diff --git a/.XCompose b/.XCompose
deleted file mode 100644
index 7d6e19b4..00000000
--- a/.XCompose
+++ /dev/null
@@ -1,93 +0,0 @@
-include "%L" # Include system defaults for locale
-
-<Multi_key> <O> <O>             : "∞"
-<Multi_key> <period> <quotedbl> : "∴"
-<Multi_key> <quotedbl> <period> : "∵"
-
-# (Select) Greek letters
-<Multi_key> <a> <a>             : "α"
-<Multi_key> <b> <b>             : "β"
-<Multi_key> <v> <bar>           : "γ"
-<Multi_key> <underscore> <bar>  : "Γ"
-<Multi_key> <d> <d>             : "δ"
-<Multi_key> <D> <D>             : "Δ"
-<Multi_key> <o> <minus>         : "θ"
-<Multi_key> <O> <minus>         : "Θ"
-<Multi_key> <slash> <l>         : "λ"
-<Multi_key> <slash> <L>         : "Λ"
-<Multi_key> <p> <i>             : "π"
-<Multi_key> <P> <I>             : "Π"
-<Multi_key> <bar> <o>           : "ρ"
-<Multi_key> <equal> <less>      : "Σ"
-<Multi_key> <o> <bar>           : "φ"
-<Multi_key> <O> <bar>           : "Φ"
-<Multi_key> <u> <bar>           : "ψ"
-<Multi_key> <U> <bar>           : "Ψ"
-<Multi_key> <w> <w>             : "ω"
-<Multi_key> <o> <h> <m>         : "Ω"
-
-# Playing cards (from https://github.com/kragen/xcompose)
-
-<Multi_key> <bracketleft> <A> <S> <bracketright>  : "🂡"	U1F0A1	# PLAYING CARD ACE OF SPADES
-<Multi_key> <bracketleft> <2> <S> <bracketright>  : "🂢"	U1F0A2	# PLAYING CARD TWO OF SPADES
-<Multi_key> <bracketleft> <3> <S> <bracketright>  : "🂣"	U1F0A3	# PLAYING CARD THREE OF SPADES
-<Multi_key> <bracketleft> <4> <S> <bracketright>  : "🂤"	U1F0A4	# PLAYING CARD FOUR OF SPADES
-<Multi_key> <bracketleft> <5> <S> <bracketright>  : "🂥"	U1F0A5	# PLAYING CARD FIVE OF SPADES
-<Multi_key> <bracketleft> <6> <S> <bracketright>  : "🂦"	U1F0A6	# PLAYING CARD SIX OF SPADES
-<Multi_key> <bracketleft> <7> <S> <bracketright>  : "🂧"	U1F0A7	# PLAYING CARD SEVEN OF SPADES
-<Multi_key> <bracketleft> <8> <S> <bracketright>  : "🂨"	U1F0A8	# PLAYING CARD EIGHT OF SPADES
-<Multi_key> <bracketleft> <9> <S> <bracketright>  : "🂩"	U1F0A9	# PLAYING CARD NINE OF SPADES
-<Multi_key> <bracketleft> <T> <S> <bracketright>  : "🂪"	U1F0AA	# PLAYING CARD TEN OF SPADES
-<Multi_key> <bracketleft> <J> <S> <bracketright>  : "🂫"	U1F0AB	# PLAYING CARD JACK OF SPADES
-<Multi_key> <bracketleft> <N> <S> <bracketright>  : "🂬"	U1F0AC	# PLAYING CARD KNIGHT OF SPADES
-<Multi_key> <bracketleft> <Q> <S> <bracketright>  : "🂭"	U1F0AD	# PLAYING CARD QUEEN OF SPADES
-<Multi_key> <bracketleft> <K> <S> <bracketright>  : "🂮"	U1F0AE	# PLAYING CARD KING OF SPADES
-
-<Multi_key> <bracketleft> <A> <H> <bracketright>  : "🂱"	U1F0B1	# PLAYING CARD ACE OF HEARTS
-<Multi_key> <bracketleft> <2> <H> <bracketright>  : "🂲"	U1F0B2	# PLAYING CARD TWO OF HEARTS
-<Multi_key> <bracketleft> <3> <H> <bracketright>  : "🂳"	U1F0B3	# PLAYING CARD THREE OF HEARTS
-<Multi_key> <bracketleft> <4> <H> <bracketright>  : "🂴"	U1F0B4	# PLAYING CARD FOUR OF HEARTS
-<Multi_key> <bracketleft> <5> <H> <bracketright>  : "🂵"	U1F0B5	# PLAYING CARD FIVE OF HEARTS
-<Multi_key> <bracketleft> <6> <H> <bracketright>  : "🂶"	U1F0B6	# PLAYING CARD SIX OF HEARTS
-<Multi_key> <bracketleft> <7> <H> <bracketright>  : "🂷"	U1F0B7	# PLAYING CARD SEVEN OF HEARTS
-<Multi_key> <bracketleft> <8> <H> <bracketright>  : "🂸"	U1F0B8	# PLAYING CARD EIGHT OF HEARTS
-<Multi_key> <bracketleft> <9> <H> <bracketright>  : "🂹"	U1F0B9	# PLAYING CARD NINE OF HEARTS
-<Multi_key> <bracketleft> <T> <H> <bracketright>  : "🂺"	U1F0BA	# PLAYING CARD TEN OF HEARTS
-<Multi_key> <bracketleft> <J> <H> <bracketright>  : "🂻"	U1F0BB	# PLAYING CARD JACK OF HEARTS
-<Multi_key> <bracketleft> <N> <H> <bracketright>  : "🂼"	U1F0BC	# PLAYING CARD KNIGHT OF HEARTS
-<Multi_key> <bracketleft> <Q> <H> <bracketright>  : "🂽"	U1F0BD	# PLAYING CARD QUEEN OF HEARTS
-<Multi_key> <bracketleft> <K> <H> <bracketright>  : "🂾"	U1F0BE	# PLAYING CARD KING OF HEARTS
-
-<Multi_key> <bracketleft> <A> <D> <bracketright>  : "🃁"	U1F0C1	# PLAYING CARD ACE OF DIAMONDS
-<Multi_key> <bracketleft> <2> <D> <bracketright>  : "🃂"	U1F0C2	# PLAYING CARD TWO OF DIAMONDS
-<Multi_key> <bracketleft> <3> <D> <bracketright>  : "🃃"	U1F0C3	# PLAYING CARD THREE OF DIAMONDS
-<Multi_key> <bracketleft> <4> <D> <bracketright>  : "🃄"	U1F0C4	# PLAYING CARD FOUR OF DIAMONDS
-<Multi_key> <bracketleft> <5> <D> <bracketright>  : "🃅"	U1F0C5	# PLAYING CARD FIVE OF DIAMONDS
-<Multi_key> <bracketleft> <6> <D> <bracketright>  : "🃆"	U1F0C6	# PLAYING CARD SIX OF DIAMONDS
-<Multi_key> <bracketleft> <7> <D> <bracketright>  : "🃇"	U1F0C7	# PLAYING CARD SEVEN OF DIAMONDS
-<Multi_key> <bracketleft> <8> <D> <bracketright>  : "🃈"	U1F0C8	# PLAYING CARD EIGHT OF DIAMONDS
-<Multi_key> <bracketleft> <9> <D> <bracketright>  : "🃉"	U1F0C9	# PLAYING CARD NINE OF DIAMONDS
-<Multi_key> <bracketleft> <T> <D> <bracketright>  : "🃊"	U1F0CA	# PLAYING CARD TEN OF DIAMONDS
-<Multi_key> <bracketleft> <J> <D> <bracketright>  : "🃋"	U1F0CB	# PLAYING CARD JACK OF DIAMONDS
-<Multi_key> <bracketleft> <N> <D> <bracketright>  : "🃌"	U1F0CC	# PLAYING CARD KNIGHT OF DIAMONDS
-<Multi_key> <bracketleft> <Q> <D> <bracketright>  : "🃍"	U1F0CD	# PLAYING CARD QUEEN OF DIAMONDS
-<Multi_key> <bracketleft> <K> <D> <bracketright>  : "🃎"	U1F0CE	# PLAYING CARD KING OF DIAMONDS
-
-<Multi_key> <bracketleft> <A> <C> <bracketright>  : "🃑"	U1F0D1	# PLAYING CARD ACE OF CLUBS
-<Multi_key> <bracketleft> <2> <C> <bracketright>  : "🃒"	U1F0D2	# PLAYING CARD TWO OF CLUBS
-<Multi_key> <bracketleft> <3> <C> <bracketright>  : "🃓"	U1F0D3	# PLAYING CARD THREE OF CLUBS
-<Multi_key> <bracketleft> <4> <C> <bracketright>  : "🃔"	U1F0D4	# PLAYING CARD FOUR OF CLUBS
-<Multi_key> <bracketleft> <5> <C> <bracketright>  : "🃕"	U1F0D5	# PLAYING CARD FIVE OF CLUBS
-<Multi_key> <bracketleft> <6> <C> <bracketright>  : "🃖"	U1F0D6	# PLAYING CARD SIX OF CLUBS
-<Multi_key> <bracketleft> <7> <C> <bracketright>  : "🃗"	U1F0D7	# PLAYING CARD SEVEN OF CLUBS
-<Multi_key> <bracketleft> <8> <C> <bracketright>  : "🃘"	U1F0D8	# PLAYING CARD EIGHT OF CLUBS
-<Multi_key> <bracketleft> <9> <C> <bracketright>  : "🃙"	U1F0D9	# PLAYING CARD NINE OF CLUBS
-<Multi_key> <bracketleft> <T> <C> <bracketright>  : "🃚"	U1F0DA	# PLAYING CARD TEN OF CLUBS
-<Multi_key> <bracketleft> <J> <C> <bracketright>  : "🃛"	U1F0DB	# PLAYING CARD JACK OF CLUBS
-<Multi_key> <bracketleft> <N> <C> <bracketright>  : "🃜"	U1F0DC	# PLAYING CARD KNIGHT OF CLUBS
-<Multi_key> <bracketleft> <Q> <C> <bracketright>  : "🃝"	U1F0DD	# PLAYING CARD QUEEN OF CLUBS
-<Multi_key> <bracketleft> <K> <C> <bracketright>  : "🃞"	U1F0DE	# PLAYING CARD KING OF CLUBS
-
-<Multi_key> <bracketleft> <C> <B> <bracketright>  : "🂠"	U1F0A0	# PLAYING CARD BACK
-<Multi_key> <bracketleft> <B> <J> <bracketright>  : "🃏" U1F0CF	# PLAYING CARD BLACK JOKER
-<Multi_key> <bracketleft> <W> <J> <bracketright>  : "🃟"	U1F0DF	# PLAYING CARD WHITE JOKER
diff --git a/.gtkrc-2.0 b/.gtkrc-2.0
deleted file mode 100644
index d5ba910b..00000000
--- a/.gtkrc-2.0
+++ /dev/null
@@ -1,4 +0,0 @@
-style "vimfix" {
-  bg[NORMAL] = "#151515"
-}
-widget "vim-main-window.*GtkForm" style "vimfix"
diff --git a/.mpd/mpd.conf b/.mpd/mpd.conf
deleted file mode 100644
index 03bcdcb5..00000000
--- a/.mpd/mpd.conf
+++ /dev/null
@@ -1,425 +0,0 @@
-# An example configuration file for MPD
-# See the mpd.conf man page for a more detailed description of each parameter.
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This 
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory		"~/Music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use 
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory "~/.mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the 
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file "~/.mpd/mpd.db"
-# 
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file "~/.mpd/mpd.log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-pid_file "~/.mpd/mpd.pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server 
-# state will be reset on server start up.
-#
-state_file "~/.mpd/mpdstate"
-#
-# The location of the sticker database.  This is a database which
-# manages dynamic information attached to songs.
-#
-#sticker_file			"~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user "mpd"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group				"nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon.
-#
-# For network
-#bind_to_address		"any"
-#
-# And for Unix Socket
-#bind_to_address		"~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port				"6600"
-#
-# This setting controls the type of information which is logged. Available 
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level			"default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that 
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback			"yes"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists	"no"
-#
-# This setting defines a list of tag types that will be extracted during the 
-# audio file discovery process. Optionally, 'comment' can be added to this
-# list.
-#
-#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in 
-# music_directory are changed.
-#
-auto_update	"yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself.  There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following 
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks	"yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks		"yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled		"yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name			"Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# can setting can be specified multiple times for different password profiles.
-#
-#password                        "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in. 
-#
-#default_permissions             "read,add,control,admin"
-#
-###############################################################################
-
-
-# Input #######################################################################
-#
-
-input {
-        plugin "curl"
-#       proxy "proxy.isp.com:8080"
-#       proxy_user "user"
-#       proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-# MPD supports various audio output types, as well as playing through multiple 
-# audio outputs at the same time, through multiple audio_output settings 
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of 
-# other audio outputs.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-#	type		"alsa"
-#	name		"My ALSA Device"
-##	device		"hw:0,0"	# optional
-##	format		"44100:16:2"	# optional
-##	mixer_type      "hardware"	# optional
-##	mixer_device	"default"	# optional
-##	mixer_control	"PCM"		# optional
-##	mixer_index	"0"		# optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-#	type		"oss"
-#	name		"My OSS Device"
-##	device		"/dev/dsp"	# optional
-##	format		"44100:16:2"	# optional
-##	mixer_type      "hardware"	# optional
-##	mixer_device	"/dev/mixer"	# optional
-##	mixer_control	"PCM"		# optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-#	type		"shout"
-#	encoding	"ogg"			# optional
-#	name		"My Shout Stream"
-#	host		"localhost"
-#	port		"8000"
-#	mount		"/mpd.ogg"
-#	password	"hackme"
-#	quality		"5.0"
-#	bitrate		"128"
-#	format		"44100:16:1"
-##	protocol	"icecast2"		# optional
-##	user		"source"		# optional
-##	description	"My Stream Description"	# optional
-##	genre		"jazz"			# optional
-##	public		"no"			# optional
-##	timeout		"2"			# optional
-##	mixer_type      "software"		# optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-#	type		"recorder"
-#	name		"My recorder"
-#	encoder		"vorbis"		# optional, vorbis or lame
-#	path		"/var/lib/mpd/recorder/mpd.ogg"
-##	quality		"5.0"			# do not define if bitrate is defined
-#	bitrate		"128"			# do not define if quality is defined
-#	format		"44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-audio_output {
-	type		"httpd"
-	name		"My HTTP Stream"
-	encoder		"vorbis"		# optional, vorbis or lame
-	port		"1376"
-	bind_to_address	"0.0.0.0"		# optional, IPv4 or IPv6
-#	quality		"5.0"			# do not define if bitrate is defined
-	bitrate		"128"			# do not define if quality is defined
-	format		"44100:16:1"
-	max_clients	"10"			# optional 0=no limit
-}
-
-audio_output {
-  type "httpd"
-  name "My HQ HTTP Stream"
-  encoder "lame"
-  port "1376"
-  bind_to_address "0.0.0.0"
-  bitrate "192"
-  format "44100:16:2"
-  max_clients "1"
-}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-audio_output {
-    type		"pulse"
-    name		"My Pulse Output"
-#	server		"remote_server"		# optional
-#	sink		"remote_server_sink"	# optional
-}
-audio_output {
-       type            "fifo"
-       name            "My FIFO"
-       path            "/tmp/mpd.fifo"
-       format          "44100:16:2"
-}
-
-#
-## Example "pipe" output:
-#
-#audio_output {
-#	type		"pipe"
-#	name		"my pipe"
-#	command		"aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-#	command		"nc example.org 8765"
-#	format		"44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-#	type		"null"
-#	name		"My Null Output"
-#	mixer_type      "none"			# optional
-#}
-#
-# This setting will change all decoded audio to be converted to the specified
-# format before being passed to the audio outputs. By default, this setting is
-# disabled.
-#
-#audio_output_format		"44100:16:2"
-#
-# If MPD has been compiled with libsamplerate support, this setting specifies 
-# the sample rate converter to use.  Possible values can be found in the 
-# mpd.conf man page or the libsamplerate documentation. By default, this is
-# setting is disabled.
-#
-#samplerate_converter		"Fastest Sinc Interpolator"
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album" or "track". See <http://www.replaygain.org>
-# for more details. This setting is off by default.
-#
-#replaygain			"album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp		"0"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has 
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization		"no"
-#
-###############################################################################
-
-
-# MPD Internal Buffering ######################################################
-#
-# This setting adjusts the size of internal decoded audio buffering. Changing
-# this may have undesired effects. Don't change this if you don't know what you
-# are doing.
-#
-#audio_buffer_size		"2048"
-#
-# This setting controls the percentage of the buffer which is filled before 
-# beginning to play. Increasing this reduces the chance of audio file skipping, 
-# at the cost of increased time prior to audio playback.
-#
-#buffer_before_play		"10%"
-#
-###############################################################################
-
-
-# Resource Limitations ########################################################
-#
-# These settings are various limitations to prevent MPD from using too many
-# resources. Generally, these settings should be minimized to prevent security
-# risks, depending on the operating resources.
-#
-#connection_timeout		"60"
-#max_connections		"10"
-#max_playlist_length		"16384"
-#max_command_list_size		"2048"
-#max_output_buffer_size		"8192"
-#
-###############################################################################
-
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you 
-# may need to modify this setting.
-#
-#filesystem_charset		"UTF-8"
-#
-# This setting controls the encoding that ID3v1 tags should be converted from.
-#
-#id3v1_encoding			"ISO-8859-1"
-#
-###############################################################################
-
-
-# SIDPlay decoder #############################################################
-#
-# songlength_database:
-#  Location of your songlengths file, as distributed with the HVSC.
-#  The sidplay plugin checks this for matching MD5 fingerprints.
-#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
-#
-# default_songlength:
-#  This is the default playing time in seconds for songs not in the
-#  songlength database, or in case you're not using a database.
-#  A value of 0 means play indefinitely.
-#
-# filter:
-#  Turns the SID filter emulation on or off.
-#
-#decoder {
-#	plugin			"sidplay"
-#	songlength_database	"/media/C64Music/DOCUMENTS/Songlengths.txt"
-#	default_songlength	"120"
-#	filter "true"
-#}
-#
-###############################################################################
-
diff --git a/.ncmpcpp/bindings b/.ncmpcpp/bindings
deleted file mode 100644
index e9bd1560..00000000
--- a/.ncmpcpp/bindings
+++ /dev/null
@@ -1,533 +0,0 @@
-##########################################################
-## this is example bindings configuration file, copy it ##
-## to ~/.ncmpcpp/bindings and set up your preferences   ##
-##########################################################
-##
-##### General rules #####
-##
-## 1) Because each action has runtime checks whether it's
-##    ok to run it, a few actions can be bound to one key.
-##    Actions will be bound in order given in configuration
-##    file. When a key is pressed, first action in order
-##    will test itself whether it's possible to run it. If
-##    test succeeds, action is executed and other actions
-##    bound to this key are ignored. If it doesn't, next
-##    action in order tests itself etc.
-##
-## 2) It's possible to bind more that one action at once
-##    to a key. It can be done using the following syntax:
-##
-##    def_key "key"
-##      action1
-##      action2
-##      ...
-##
-##    This creates chain of actions. When such chain is
-##    executed, each action in chain is run until the end of
-##    chain is reached or one of actions failed to execute
-##    due to its requirements not being met. Note that
-##    execution of chain of actions ALWAYS succeeds, no
-##    matter if one of actions from the chain failed (even
-##    if it was the first one in order and thus nothing
-##    was really executed). Because of that, if you decide
-##    to bind both actions and chains to a single key, make
-##    sure that chain is defined in the end. Otherwise, all
-##    actions bound to the key after chain will never be run.
-##
-## 3) When ncmpcpp starts, bindings configuration file is
-##    parsed and then ncmpcpp provides "missing pieces"
-##    of default keybindings. If you want to disable some
-##    bindings, there is a special action called 'dummy'
-##    for that purpose. Eg. if you want to disable ability
-##    to crop playlists, you need to put the following
-##    into configuration file:
-##
-##    def_key "C"
-##      dummy
-##
-##    After that ncmpcpp will not bind any default action
-##    to this key.
-##
-## 4) To let you write simple macros, the following special
-##    actions are provided:
-##
-##    - push_character "character" - pushes given special
-##      character into input queue, so it will be immediately
-##      picked by ncmpcpp upon next call to readKey function.
-##      Accepted values: mouse, up, down, page_up, page_down,
-##      home, end, space, enter, insert, delete, left, right,
-##      tab, shift_tab, ctrl_a, ctrl_b, ..., ctrl_z, f1, f2,
-##      ..., f12, backspace, backspace_2.
-##
-##    - push_characters "string" - pushes given string into
-##      input queue.
-##
-##    - require_runnable "action" - checks whether given action
-##      is runnable and fails if it isn't. This is especially
-##      useful when mixed with previous two functions. Consider
-##      the following macro definition:
-##
-##      def_key "key"
-##        push_characters "custom_filter"
-##        apply_filter
-##
-##      If apply_filter can't be currently run, we end up with
-##      sequence of characters in input queue which will be
-##      treated just as we typed them. This may lead to unexpected
-##      results (in this case 'c' will most likely clear current
-##      playlist, 'u' will trigger database update, 's' will stop
-##      playback etc.). To prevent such thing from happening, we
-##      need to change above definition to this one:
-##
-##      def_key "key"
-##        require_runnable "apply_filter"
-##        push_characters "custom_filter"
-##        apply_filter
-##
-##      Here, first we test whether apply_filter can be actually run
-##      before we stuff characters into input queue, so if condition
-##      is not met, whole chain is aborted and we're fine.
-##
-##    - require_screen "screen" - checks whether given screen is
-##      currently active. accepted values: browser, clock, help,
-##      media_library, outputs, playlist, playlist_editor,
-##      search_engine, tag_editor, visualizer, last_fm, lyrics,
-##      selected_items_adder, server_info, song_info,
-##      sort_playlist_dialog, tiny_tag_editor.
-##
-##    - run_external_command "command" - runs given command using
-##      system() function.
-##
-## 5) In addition to binding to a key, you can also bind actions
-##    or chains of actions to a command. If it comes to commands,
-##    syntax is very similar to defining keys. Here goes example
-##    definition of a command:
-##
-##      def_command "quit" [deferred]
-##        stop
-##        quit
-##
-##    If you execute the above command (which can be done by
-##    invoking action execute_command, typing 'quit' and pressing
-##    enter), ncmpcpp will stop the player and then quit. Note the
-##    presence of word 'deferred' enclosed in square brackets. It
-##    tells ncmpcpp to wait for confirmation (ie. pressing enter)
-##    after you typed quit. Instead of 'deferred', 'immediate'
-##    could be used. Then ncmpcpp will not wait for confirmation
-##    (enter) and will execute the command the moment it sees it.
-##
-## Note: Both 'backspace' and 'backspace_2' are used because some
-##       terminals interpret backspace using keycode of 'backspace'
-##       and some the one of 'backspace_2'. You can get away with
-##       binding once if all your terminal emulators use the same
-##       value.
-##
-## Note: There is a difference between:
-##
-##         def_key "key"
-##           action1
-##
-##         def_key "key"
-##           action2
-##
-##       and
-##
-##         def_key "key"
-##           action1
-##           action2
-##
-##      First one binds two single actions to the same key whilst
-##      second one defines a chain of actions. The behavior of
-##      these two is different and is described in (1) and (2).
-##
-## Note: Function def_key accepts non-ascii characters.
-##
-##### List of unbound actions #####
-##
-## The following actions are not bound to any key/command:
-##
-##  - set_volume
-##  - filter_playlist_on_priorities
-##
-#
-#def_key "mouse"
-#  mouse_event
-#
-#def_key "up"
-#  scroll_up
-#
-#def_key "down"
-#  scroll_down
-#
-def_key "j"
-  scroll_down
-
-def_key "k"
-  scroll_up
-
-#def_key "["
-#  scroll_up_album
-#
-#def_key "]"
-#  scroll_down_album
-#
-#def_key "{"
-#  scroll_up_artist
-#
-#def_key "}"
-#  scroll_down_artist
-#
-#def_key "page_up"
-#  page_up
-#
-#def_key "page_down"
-#  page_down
-#
-#def_key "home"
-#  move_home
-#
-#def_key "end"
-#  move_end
-#
-#def_key "space"
-#  press_space
-#
-#def_key "enter"
-#  press_enter
-#
-#def_key "delete"
-#  delete_playlist_items
-#
-#def_key "delete"
-#  delete_stored_playlist
-#
-def_key "d"
-  delete_playlist_items
-
-def_key "d"
-  delete_stored_playlist
-
-#def_key "right"
-#  next_column
-#
-#def_key "right"
-#  slave_screen
-#
-#def_key "right"
-#  volume_up
-#
-#def_key "+"
-#  volume_up
-#
-#def_key "left"
-#  previous_column
-#
-#def_key "left"
-#  master_screen
-#
-#def_key "left"
-#  volume_down
-#
-#def_key "-"
-#  volume_down
-#
-#def_key ":"
-#  execute_command
-#
-#def_key "tab"
-#  next_screen
-#
-#def_key "shift_tab"
-#  previous_screen
-#
-#def_key "f1"
-#  show_help
-#
-def_key "1"
-  show_playlist
-
-def_key "2"
-  show_media_library
-
-def_key "2"
-  toggle_media_library_columns_mode
-
-def_key "3"
-  show_search_engine
-
-def_key "3"
-  reset_search_engine
-
-def_key "4"
-  show_browser
-
-def_key "4"
-  change_browse_mode
-
-#def_key "5"
-#  show_playlist_editor
-#
-#def_key "6"
-#  show_tag_editor
-#
-#def_key "7"
-#  show_outputs
-#
-#def_key "8"
-#  show_visualizer
-#
-def_key "0"
-  show_help
-
-#def_key "="
-#  show_clock
-#
-#def_key "@"
-#  show_server_info
-#
-#def_key "s"
-#  stop
-#
-#def_key "p"
-#  pause
-#
-#def_key ">"
-#  next
-#
-#def_key "<"
-#  previous
-#
-#def_key "ctrl_h"
-#  jump_to_parent_directory
-#
-#def_key "ctrl_h"
-#  replay_song
-#
-#def_key "backspace"
-#  jump_to_parent_directory
-#
-#def_key "backspace"
-#  replay_song
-#
-#def_key "backspace_2"
-#  jump_to_parent_directory
-#
-#def_key "backspace_2"
-#  replay_song
-#
-#def_key "f"
-#  seek_forward
-#
-#def_key "b"
-#  seek_backward
-#
-#def_key "r"
-#  toggle_repeat
-#
-#def_key "z"
-#  toggle_random
-#
-#def_key "y"
-#  save_tag_changes
-#
-#def_key "y"
-#  start_searching
-#
-#def_key "y"
-#  toggle_single
-#
-#def_key "R"
-#  toggle_consume
-#
-#def_key "Y"
-#  toggle_replay_gain_mode
-#
-#def_key "t"
-#  toggle_space_mode
-#
-#def_key "T"
-#  toggle_add_mode
-#
-#def_key "|"
-#  toggle_mouse
-#
-#def_key "#"
-#  toggle_bitrate_visibility
-#
-#def_key "Z"
-#  shuffle
-#
-#def_key "x"
-#  toggle_crossfade
-#
-#def_key "X"
-#  set_crossfade
-#
-#def_key "u"
-#  update_database
-#
-#def_key "ctrl_v"
-#  sort_playlist
-#
-#def_key "ctrl_r"
-#  reverse_playlist
-#
-#def_key "ctrl_f"
-#  apply_filter
-#
-#def_key "/"
-#  find
-#
-#def_key "/"
-#  find_item_forward
-#
-#def_key "?"
-#  find
-#
-#def_key "?"
-#  find_item_backward
-#
-#def_key "."
-#  next_found_item
-#
-#def_key ","
-#  previous_found_item
-#
-#def_key "w"
-#  toggle_find_mode
-#
-#def_key "e"
-#  edit_song
-#
-#def_key "e"
-#  edit_library_tag
-#
-#def_key "e"
-#  edit_library_album
-#
-#def_key "e"
-#  edit_directory_name
-#
-#def_key "e"
-#  edit_playlist_name
-#
-#def_key "e"
-#  edit_lyrics
-#
-#def_key "i"
-#  show_song_info
-#
-#def_key "I"
-#  show_artist_info
-#
-#def_key "g"
-#  jump_to_position_in_song
-#
-#def_key "l"
-#  show_lyrics
-#
-#def_key "v"
-#  reverse_selection
-#
-#def_key "V"
-#  remove_selection
-#
-#def_key "B"
-#  select_album
-#
-#def_key "a"
-#  add_selected_items
-#
-#def_key "c"
-#  clear_playlist
-#
-#def_key "c"
-#  clear_main_playlist
-#
-#def_key "C"
-#  crop_playlist
-#
-#def_key "C"
-#  crop_main_playlist
-#
-#def_key "m"
-#  move_sort_order_up
-#
-#def_key "m"
-#  move_selected_items_up
-#
-#def_key "m"
-#  toggle_media_library_sort_mode
-#
-#def_key "n"
-#  move_sort_order_down
-#
-#def_key "n"
-#  move_selected_items_down
-#
-#def_key "M"
-#  move_selected_items_to
-#
-#def_key "A"
-#  add
-#
-#def_key "S"
-#  save_playlist
-#
-#def_key "o"
-#  jump_to_playing_song
-#
-#def_key "G"
-#  jump_to_browser
-#
-#def_key "G"
-#  jump_to_playlist_editor
-#
-#def_key "~"
-#  jump_to_media_library
-#
-#def_key "E"
-#  jump_to_tag_editor
-#
-#def_key "U"
-#  toggle_playing_song_centering
-#
-#def_key "P"
-#  toggle_display_mode
-#
-#def_key "\\"
-#  toggle_interface
-#
-#def_key "!"
-#  toggle_separators_between_albums
-#
-#def_key "L"
-#  toggle_lyrics_fetcher
-#
-#def_key "F"
-#  toggle_fetching_lyrics_in_background
-#
-#def_key "ctrl_l"
-#  toggle_screen_lock
-#
-#def_key "`"
-#  toggle_browser_sort_mode
-#
-#def_key "`"
-#  toggle_library_tag_type
-#
-#def_key "`"
-#  refetch_lyrics
-#
-#def_key "`"
-#  refetch_artist_info
-#
-#def_key "`"
-#  add_random_items
-#
-#def_key "ctrl_p"
-#  set_selected_items_priority
-#
-#def_key "q"
-#  quit
-#
diff --git a/.ncmpcpp/config b/.ncmpcpp/config
deleted file mode 100644
index 367270e8..00000000
--- a/.ncmpcpp/config
+++ /dev/null
@@ -1,497 +0,0 @@
-####################################################
-## this is example configuration file, copy it to ##
-## ~/.ncmpcpp/config and set up your preferences  ##
-####################################################
-#
-##### directories ######
-##
-## Directory for storing ncmpcpp related files.
-## Changing it is useful if you want to store
-## everything somewhere else and provide command
-## line setting for alternative location to config
-## file which defines that while launching ncmpcpp.
-##
-#
-#ncmpcpp_directory = "~/.ncmpcpp"
-#
-##
-## Directory for storing downloaded lyrics. It
-## defaults to ~/.lyrics since other MPD clients
-## (eg. ncmpc) also use that location.
-##
-#
-#lyrics_directory = "~/.lyrics"
-#
-##### connection settings #####
-#
-## set it in order to make tag editor and renaming files work properly
-#
-#mpd_host = "localhost"
-#
-#mpd_port = "6600"
-#
-mpd_music_dir = "~/Music"
-#
-#mpd_connection_timeout = "5"
-#
-#mpd_crossfade_time = "5"
-#
-##### music visualizer #####
-##
-## Note: In order to make music visualizer work you'll
-## need to use mpd fifo output, whose format parameter
-## has to be set to 44100:16:1 for mono visualization
-## or 44100:16:2 for stereo visualization. Example
-## configuration (it has to be put into mpd.conf):
-##
-## audio_output {
-##        type            "fifo"
-##        name            "My FIFO"
-##        path            "/tmp/mpd.fifo"
-##        format          "44100:16:2"
-## }
-##
-#
-##
-## If you set format to 44100:16:2, make it 'yes'.
-##
-#
-visualizer_in_stereo = "yes"
-#
-visualizer_fifo_path = "/tmp/mpd.fifo"
-#
-##
-## Note: Below parameter is needed for ncmpcpp
-## to determine which output provides data for
-## visualizer and thus allow syncing between
-## visualization and sound as currently there
-## are some problems with it.
-##
-#
-visualizer_output_name = "My FIFO"
-#
-##
-## Note: Below parameter defines how often ncmpcpp
-## has to "synchronize" visualizer and audio outputs.
-## 30 seconds is optimal value, but if you experience
-## synchronization problems, set it to lower value.
-## Keep in mind that sane values start with >=10.
-##
-#
-#visualizer_sync_interval = "30"
-#
-##
-## Note: To enable spectrum frequency visualization
-## you need to compile ncmpcpp with fftw3 support.
-##
-#
-#visualizer_type = "wave" (spectrum/wave)
-#
-#visualizer_look = "◆│"
-#
-##### system encoding #####
-##
-## ncmpcpp should detect your charset encoding
-## but if it failed to do so, you can specify
-## charset encoding you are using here.
-##
-## Note: You can see whether your ncmpcpp build
-## supports charset detection by checking output
-## of `ncmpcpp --version`.
-##
-## Note: Since MPD uses utf8 by default, setting
-## this option makes sense only if your encoding
-## is different.
-##
-#
-#system_encoding = ""
-#
-##### delays #####
-#
-## delay after playlist highlighting will be disabled (0 = don't disable)
-#
-#playlist_disable_highlight_delay = "5"
-#
-## defines how long various messages are supposed to be visible
-#
-#message_delay_time = "4"
-#
-##### song format #####
-##
-## for song format you can use:
-##
-## %l - length
-## %f - filename
-## %D - directory
-## %a - artist
-## %A - album artist
-## %t - title
-## %b - album
-## %y - date
-## %n - track number (01/12 -> 01)
-## %N - full track info (01/12 -> 01/12)
-## %g - genre
-## %c - composer
-## %p - performer
-## %d - disc
-## %C - comment
-## %P - priority
-## $R - begin right alignment
-##
-## you can also put them in { } and then it will be displayed
-## only if all requested values are available and/or define alternate
-## value with { }|{ } eg. {%a - %t}|{%f}
-##
-## Note: If you want to set limit on maximal length of a tag, just
-## put the appropriate number between % and character that defines
-## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
-##
-## Note: Format that is similar to "%a - %t" (i.e. without any additional
-## braces) is equal to "{%a - %t}", so if one of the tags is missing,
-## you'll get nothing.
-##
-## text can also have different color than the main window has,
-## eg. if you want length to be green, write $3%l$9
-##
-## available values:
-##
-## - 0 - default window color (discards all other colors)
-## - 1 - black
-## - 2 - red
-## - 3 - green
-## - 4 - yellow
-## - 5 - blue
-## - 6 - magenta
-## - 7 - cyan
-## - 8 - white
-## - 9 - end of current color
-##
-## Note: colors can be nested.
-##
-#
-#song_list_format = "{%a - }{%t}|{$8%f$9}$R{$3(%l)$9}"
-#
-#song_status_format = "{{%a{ \"%b\"{ (%y)}} - }{%t}}|{%f}"
-#
-#song_library_format = "{%n - }{%t}|{%f}"
-#
-#tag_editor_album_format = "{(%y) }%b"
-#
-##
-## Note: Below variables are used for sorting songs in browser.
-## The sort mode determines how songs are sorted, and can be used
-## in combination with a sort format to specify a custom sorting format.
-## Possible values for browser_sort_mode are "name", "mtime" and "format".
-##
-#
-#browser_sort_mode = "name"
-#
-#browser_sort_format = "{%a - }{%t}|{%f} {(%l)}"
-#
-##
-## Note: Below variables are for alternative version of user's interface.
-## Their syntax supports all tags and colors listed above plus some extra
-## markers used for text attributes. They are followed by character '$'.
-## After that you can put:
-##
-## - b - bold text
-## - u - underline text
-## - r - reverse colors
-## - a - use alternative character set
-##
-## If you don't want to use an attribute anymore, just put it again, but
-## this time insert character '/' between '$' and attribute character,
-## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename
-## with reversed colors.
-##
-#
-#alternative_header_first_line_format = "$b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b"
-#
-#alternative_header_second_line_format = "{{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}"
-#
-##
-## Note: Below variables also supports
-## text attributes listed above.
-##
-#
-#now_playing_prefix = "$b"
-#
-#now_playing_suffix = "$/b"
-#
-#browser_playlist_prefix = "$2playlist$9 "
-#
-#selected_item_prefix = "$6"
-#
-#selected_item_suffix = "$9"
-#
-#modified_item_prefix = "$3> $9"
-#
-## colors are not supported for below variable
-#
-#song_window_title_format = "{%a - }{%t}|{%f}"
-#
-##### columns settings #####
-##
-## syntax of song columns list format is "column column etc."
-##
-## - syntax for each column is:
-##
-## (width of column)[column's color]{displayed tag}
-##
-## Note: Width is by default in %, if you want a column to
-## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
-## will be the column that take 10% of screen (so the real column's
-## width will depend on actual screen size), whereas (10f)[white]{a}
-## will take 10 terminal cells, no matter how wide the screen is.
-##
-## - color is optional (if you want the default one, type [])
-##
-## Note: You can give a column additional attributes by putting appropriate
-## character after displayed tag character. Available attributes are:
-##
-## - r - column will be right aligned
-## - E - if tag is empty, empty tag marker won't be displayed
-##
-## You can also:
-##
-## - give a column custom name by putting it after attributes,
-##   separated with character ':', e.g. {lr:Length} gives you
-##   right aligned column of lengths named "Length".
-##
-## - define sequence of tags, that have to be displayed in case
-##   predecessor is empty in a way similar to the one in classic
-##   song format, i.e. using '|' character, e.g. {a|c|p:Owner}
-##   creates column named "Owner" that tries to display artist
-##   tag and then composer and performer if previous ones are
-##   not available.
-##
-#
-song_columns_list_format = "(7f)[green]{l} (25)[cyan]{a} (40)[]{t|f:Title} (30)[red]{b}"
-#
-##### various settings #####
-#
-##
-## Note: Custom command that will be executed each
-## time song changes. Useful for notifications etc.
-##
-## Attention: It doesn't support song format anymore.
-## Use `ncmpcpp --now-playing SONG_FORMAT` instead.
-##
-#execute_on_song_change = ""
-#
-playlist_show_remaining_time = "no"
-#
-playlist_shorten_total_times = "yes"
-#
-#playlist_separate_albums = "no"
-#
-playlist_display_mode = "columns" #(classic/columns)
-#
-browser_display_mode = "columns" #(classic/columns)
-#
-search_engine_display_mode = "columns" #(classic/columns)
-#
-playlist_editor_display_mode = "columns" #(classic/columns)
-#
-#discard_colors_if_item_is_selected = "yes"
-#
-#incremental_seeking = "yes"
-#
-#seek_time = "1"
-#
-#volume_change_step = "1"
-#
-#autocenter_mode = "no"
-#
-#centered_cursor = "no"
-#
-##
-## Note: You can specify third character which will
-## be used to build 'empty' part of progressbar.
-##
-#progressbar_look = "=>"
-#
-#progressbar_boldness = "yes"
-#
-#default_place_to_search_in = "database" (database/playlist)
-#
-user_interface = "alternative" #(classic/alternative)
-#
-media_library_left_column = "A" #(possible values: a,y,g,c,p, legend above)
-#
-#default_find_mode = "wrapped" (wrapped/normal)
-#
-#default_space_mode = "add" (add/select)
-#
-#default_tag_editor_pattern = "%n - %t"
-#
-#header_visibility = "yes"
-#
-#statusbar_visibility = "yes"
-#
-titles_visibility = "no"
-#
-#header_text_scrolling = "yes"
-#
-#fancy_scrolling = "yes"
-#
-#cyclic_scrolling = "no"
-#
-#lines_scrolled = "2"
-#
-#follow_now_playing_lyrics = "no"
-#
-#fetch_lyrics_for_current_song_in_background = "no"
-#
-#store_lyrics_in_song_dir = "no"
-#
-#generate_win32_compatible_filenames = "yes"
-#
-##
-## Note: If you set this variable, ncmpcpp will try to
-## get info from last.fm in language you set and if it
-## fails, it will fall back to english. Otherwise it will
-## use english the first time.
-##
-## Note: Language has to be expressed as an ISO 639 alpha-2 code.
-##
-#lastfm_preferred_language = ""
-#
-#ncmpc_like_songs_adding = "no" (enabled - add/remove, disabled - always add)
-#
-#show_hidden_files_in_local_browser = "no"
-#
-#display_screens_numbers_on_start = "yes"
-#
-##
-## How shall key_screen_switcher work?
-##
-## - "previous" - switch between current and last used screen
-## - "sequence: 2 -> 9 -> 5" - switch between given sequence of screens.
-##
-## Screen numbers you can use after 'sequence' keyword are:
-##
-## - 1 - help
-## - 2 - playlist
-## - 3 - browser
-## - 4 - search engine
-## - 5 - media library
-## - 6 - playlist editor
-## - 7 - tag editor
-## - 8 - outputs
-## - 9 - visualizer
-## - 10 - clock
-##
-## As you can see, above example will switch between
-## playlist, visualizer and media library screens.
-##
-#screen_switcher_mode = "sequence: 2 -> 3"
-#
-##
-## Default width of locked screen (in %).
-## Acceptable values are from 20 to 80.
-##
-#
-#locked_screen_width_part = "50"
-#
-#ask_for_locked_screen_width_part = "yes"
-#
-##
-## Note: You can define startup screen for ncmpcpp
-## by choosing screen number from the list above.
-##
-#startup_screen = "2"
-#
-#jump_to_now_playing_song_at_start = "yes"
-#
-ask_before_clearing_main_playlist = "no"
-#
-#clock_display_seconds = "no"
-#
-#display_volume_level = "yes"
-#
-display_bitrate = "yes"
-#
-#display_remaining_time = "yes"
-#
-#regular_expressions = "none" (none/basic/extended)
-#
-##
-## Note: If below is enabled, ncmpcpp will ignore leading
-## "The" word while sorting items in browser, tags in
-## media library, etc.
-##
-ignore_leading_the = "yes"
-#
-#block_search_constraints_change_if_items_found = "yes"
-#
-#mouse_support = "yes"
-#
-#mouse_list_scroll_whole_page = "yes"
-#
-#empty_tag_marker = "<empty>"
-#
-#tags_separator = " | "
-#
-#tag_editor_extended_numeration = "no"
-#
-#media_library_sort_by_mtime = "no"
-#
-#enable_window_title = "yes"
-#
-##
-## Note: You can choose default search mode for search
-## engine. Available modes are:
-##
-## - 1 - use mpd built-in searching (no regexes, pattern matching)
-## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
-##       but if your mpd is on a remote machine, downloading big database
-##       to process it can take a while
-## - 3 - match only exact values (this mode uses mpd function for searching
-##       in database and local one for searching in current playlist)
-##
-#
-search_engine_default_search_mode = "2"
-#
-#external_editor = ""
-#
-#use_console_editor = "no" (set to yes, if your editor is console app)
-#
-##### colors definitions #####
-#
-#colors_enabled = "yes"
-#
-#empty_tag_color = "cyan"
-#
-#header_window_color = "default"
-#
-#volume_color = "default"
-#
-#state_line_color = "default"
-#
-#state_flags_color = "default"
-#
-#main_window_color = "yellow"
-#
-#color1 = "white"
-#
-#color2 = "green"
-#
-#main_window_highlight_color = "yellow"
-#
-#progressbar_color = "default"
-#
-#progressbar_elapsed_color = "default"
-#
-#statusbar_color = "default"
-#
-#alternative_ui_separator_color = "black"
-#
-#active_column_color = "red"
-#
-#visualizer_color = "yellow"
-#
-#window_border_color = "green"
-#
-#active_window_border = "red"
-#
diff --git a/.riplrc b/.riplrc
deleted file mode 100644
index e10acd3c..00000000
--- a/.riplrc
+++ /dev/null
@@ -1 +0,0 @@
-%w[multi_line rocket color_error color_result auto_indent short_errors].map {|r| require "ripl/#{r}" }
diff --git a/.xprofile b/.xprofile
deleted file mode 100755
index 4b1a421c..00000000
--- a/.xprofile
+++ /dev/null
@@ -1,3 +0,0 @@
-xrandr --newmode "2560x1440_35.00"  173.75  2560 2704 2968 3376  1440 1443 1448 1472 -hsync +vsync
-xrandr --addmode HDMI1 "2560x1440_35.00"
-xrandr --output HDMI1 --mode "2560x1440_35.00"