about summary refs log tree commit diff
path: root/default.css
diff options
context:
space:
mode:
Diffstat (limited to '')
0 files changed, 0 insertions, 0 deletions
 

generated by cgit-pink 1.4.1 (git 2.36.1) at 2025-03-18 19:45:07 +0000


 


om cgit_print_error() to cgit_print_error_page().

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14about: move layout into page functionsJohn Keeping

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14ui-shared: add cgit_print_layout_{start,end}()John Keeping

These will avoid needing to call three functions to start page layout in
subsequent patches when we move the layout setup into each individual
page.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14html: remove html_status()John Keeping

This is now unused.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14snapshot: don't reimplement cgit_print_error_page()John Keeping

cgit_print_error_page() has the advantage that it sets a suitable HTTP
status code for the response.  Note that setting "mimetype" is redundant
here since it cannot have changed since being initialized in
cgit.c::prepare_context(), so we do not need to worry that
cgit_print_error_page() does not set it.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14snapshot: use cgit_print_error_page() for HTTP status codesJohn Keeping

This is a bugfix as well as an improvement to the HTTP status code
handling since previously we would not print HTTP headers on any of
these code paths.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14patch: use cgit_print_error_page() for HTTP status codesJohn Keeping

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14blob: use cgit_print_error_page() to add HTTP headersJohn Keeping

This is a bugfix as well as an improvement to the HTTP status code
handling since previously we would not print HTTP headers on any of
these code paths.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14snapshot: use cgit_print_error_page() instead of html_status()John Keeping

This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14plain: use cgit_print_error_page() instead of html_status()John Keeping

This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14clone: use cgit_print_error_page() instead of html_status()John Keeping

This provides a formatted error response rather than a simple HTTP
error.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14cgit: use cgit_print_error_page() where appropriateJohn Keeping

These are more-or-less one-to-one translations but in the final hunk we
gain an HTTP error code where we used to send "200 OK", which is an
improvement.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14ui-shared: add cgit_print_error_page() functionJohn Keeping

This will allow us to generate error responses with the correct HTTP
response code without needing all of the layout boilerplate.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-14ui-patch: make sure to send http headersChristian Hesse

Requesting a text/plain patch with bad commit id made cgit send text
without proper http headers. This results in "500 Internal Server Error"
with "Premature end of script headers" in server logs.
So print http headers before error message and return.

Signed-off-by: Christian Hesse <mail@eworm.de>
Reviewed-by: John Keeping <john@keeping.me.uk>



2015-08-13Makefile: make "git/config.mak.uname" inclusion optionalJohn Keeping

If we haven't got a "git" directory, it should still be possible to run
"make get-git", so we cannot include this file unconditionally.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13ui-shared: show full date in tooltip if longer ago than max_relativeJohn Keeping

Commit caed6cb (ui-shared: show absolute time in tooltip for relative
dates, 2014-12-20) added a toolip when we show a relative time.

However, in some cases we show a short date (that is, the date but not
the time) if an event was sufficiently far in the past and that commit
did not update that case to add the same tooltip.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13ui-shared: use common function in print_rel_date()John Keeping

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13ui-shared: extract date formatting to a functionJohn Keeping

This will allow this code to be common with print_rel_date.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13filter: don't use dlsym unnecessarilyJohn Keeping

We only need to hook write() if Lua filter's are in use.  If support has
been disabled, remove the dependency on dlsym().

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13ui-tree: use "sane" isgraph()John Keeping

Git's git-compat-util.h defines a "sane ctype" that does not use locale
information and works with signed chars, but it does not include
isgraph() so we have included ctype.h ourselves.

However, this means we have to include a system header before
git-compat-util.h which may lead to the system defining some macros
(e.g. _FILE_OFFSET_BITS on Solaris) before git-compat-util.h redefines
them with a different value.  We cannot include ctype.h after
git-compat-util.h because we have defined many of its functions as
macros which causes a stream of compilation errors.

Defining our own "sane" isgraph() using Git's sane isprint() and
isspace() avoids all of these problems.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13cgit.h: move stdbool.h from ui-shared.hJohn Keeping

Follow the Git policy of including system headers in only one place.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13cache.c: fix header orderJohn Keeping

git-compat-util.h may define values that affect how system headers are
interpreted, so move sys/sendfile.h after cgit.h (which includes
git-compat-util.h).

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13configfile.c: don't include system headers directlyJohn Keeping

git-compat-util.h may define various values that affect the
interpretation of system headers.  In most places we include cgit.h
first, which pulls in git-compat-util.h, but this file does not depend
on anything else in CGit, so use git-compat-util.h directly.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13Remove redundant includesJohn Keeping

These are all included in git-compat-util.h (when necessary), which we
include in cgit.h.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13Makefile: include Git's config.mak.unameJohn Keeping

This pulls in the correct value of $(INSTALL) on a wide variety of
systems.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13tests: allow shell to be overriddenJohn Keeping

On some systems (e.g. Solaris), /bin/sh is not a POSIX shell.  Git
already provides suitable overrides in its config.mak.uname file and we
provide cgit.conf to allow the user to further change this.

The code for this is taken from Git's t/Makefile, meaning that we now
invoke the tests in the same way that Git does.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-13redirect: cleanlinessJason A. Donenfeld


2015-08-13redirect: be more careful for different cgi setupsJason A. Donenfeld


2015-08-12ui-log: fix double countingJohn Keeping

This crept in while rebasing the previous commit onto an updated
upstream.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-12log: allow users to follow a fileJohn Keeping

Teach the "log" UI to behave in the same way as "git log --follow", when
given a suitable instruction by the user.  The default behaviour remains
to show the log without following renames, but the follow behaviour can
be activated by following a link in the page header.

Follow is not the default because outputting merges in follow mode is
tricky ("git log --follow" will not show merges).  We also disable the
graph in follow mode because the commit graph is not simplified so we
end up with frequent gaps in the graph and many lines that do not
connect with any commits we're actually showing.

We also teach the "diff" and "commit" UIs to respect the follow flag on
URLs, causing the single-file version of these UIs to detect renames.
This feature is needed only for commits that rename the path we're
interested in.

For commits before the file has been renamed (i.e. that appear later in
the log list) we change the file path in the links from the log to point
to the old name; this means that links to commits always limit by the
path known to that commit.  If we didn't do this we would need to walk
down the log diff'ing every commit whenever we want to show a commit.
The drawback is that the "Log" link in the top bar of such a page links
to the log limited by the old name, so it will only show pre-rename
commits.  I consider this a reasonable trade-off since the "Back" button
still works and the log matches the path displayed in the top bar.

Since following renames requires running diff on every commit we
consider, I've added a knob to the configuration file to globally
enable/disable this feature.  Note that we may consider a large number
of commits the revision walking machinery no longer performs any path
limitation so we have to examine every commit until we find a page full
of commits that affect the target path or something related to it.

Suggested-by: René Neumann <necoro@necoro.eu>
Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-12shared: make cgit_diff_tree_cb publicJohn Keeping

This will allow us to use this nice wrapper function elsewhere, avoiding
dealing with the diff queue when we only need to inspect a filepair.

Signed-off-by: John Keeping <john@keeping.me.uk>



2015-08-12t0110: Chain together using &&Jason A. Donenfeld


2015-08-12about: always ensure page has a trailing slashJason A. Donenfeld

Otherwise we can't easily embed links to other /about/ pages.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>



2015-08-12filters: apply HTML escapingLazaros Koromilas

http://www.w3.org/International/questions/qa-escapes#use



2015-08-12git: update to v2.5.0Christian Hesse

Update to git version v2.5.0.

* Upstream commit 5455ee0573a22bb793a7083d593ae1ace909cd4c (Merge branch
  'bc/object-id') changed API:

  for_each_ref() callback functions were taught to name the objects
  not with "unsigned char sha1[20]" but with "struct object_id".

* Upstream commit dcf692625ac569fefbe52269061230f4fde10e47 (path.c: make
  get_pathname() call sites return const char *)

Signed-off-by: Christian Hesse <mail@eworm.de>



2015-08-12Fix processing of repo.hide and repo.ignoreDaniel Reichelt